Feeding Adjustment Information. Vaisala MMT330

User's Guide _______________________________________________________________________

Feeding Adjustment Information

This information is shown on the device information fields (see section

Device Information on page 104.)

Using Display/Keypad

1. If you are not in the adjustment menu, press the ADJ button on the motherboard (opens the ADJUSTMENT MENU).

2.

Select ►Adjustment info, press the arrow ► button.

3. Select Date, press SET. Give the date by using the arrow buttons.

Press OK.

4. Select i, press SET. Enter information text including 17 characters at maximum by using the arrow buttons. Press OK.

5. Press EXIT to return to the basic display.

Using Serial Line

CTEXT

Use the CTEXT command to enter text to the adjustment information field.

Example:

>ctext

Adjust. info : (not set) ? HMK15

>

CDATE

Use the CDATE command to enter date to adjustment information field.

Set the adjustment date in format YYYY-MM-DD.

Example:

>cdate

Adjust. date : (not set) ? 2004-05-21

>

158 __________________________________________________________________ M210733EN-H