advertisement
Standard_Telephone_Guide.qxp 5/7/2007 3:22 PM Page 17
DIALING FEATURES
SPEED DIALING
You can dial a preprogrammed telephone number stored in the system-wide speed dial list of numbers 500–999 or from your personal list of numbers 00–49.
• Lift the handset and dial 16.
• Dial the desired speed dial number.
• The telephone number is automatically dialed for you.
NOTE: You system may be set for 950 system wide numbers. If so the system speed dial access codes are 050~999 and the station speed dial codes are 000~049.
PROGRAMMING PERSONAL
SPEED DIAL NUMBERS
To program personal speed dial numbers:
• Lift handset to go offhook.
• Dial 15105 the next available speed dial bin number (e.g. 01), a trunk or trunk group number and your speed dial digits.
• Listen for system dial tone and replace handset.
NOTE: It is much easier to have your System Administrator program these for you.
LAST NUMBER REDIAL
To redial the last telephone number you have dialed:
• Lift the handset and dial 19.
NOTE: Redial does not apply to intercom calls.
SAVE NUMBER WITH REDIAL
To save the number you have just dialed for later use:
• Before hanging up, hookflash, receive confirmation tone and dial 17.
To redial this saved number at any time:
• Lift the handset and dial 17. This step will select the same line and dial the number for you.
This telephone number is stored in memory until you save another. When you do, the new number will be saved and the old number will be erased.
NOTE: Save Number does not apply to intercom calls.
13
advertisement
Related manuals
advertisement
Table of contents
- 9 Making an Outside Call
- 9 Answering an Outside Call
- 9 Universal Answer
- 10 Flash/Recall
- 10 Busy Line Queuing with Callback
- 11 Calling Other Stations
- 11 Answering Intercom Calls
- 11 Busy Station Callback
- 11 Busy Station Camp-on
- 12 Calling Your System Operator
- 13 Holding Calls
- 14 Transferring Calls
- 14 Transfer with Camp-On
- 14 Transfer Cancel
- 14 Transfer Recall
- 15 Call Waiting
- 15 Setting Up a Conference
- 17 Forwarding Your Calls
- 17 Call Pickup
- 18 Speed Dialing
- 18 Programming Personal Speed Dial Numbers
- 18 Last Number Redial
- 18 Save Number with Redial
- 19 Pulse to Tone Changeover
- 20 Making an Internal Page
- 20 Making an External Page
- 20 All Page
- 20 Meet Me Page/Answer
- 20 Call Park and Page
- 21 Retrieving a Parked Call
- 21 Setting a Message Indication
- 21 Returning Messages
- 22 Canceling a Message
- 22 Programmed Messages
- 23 Do Not Disturb
- 23 Door Phone Calls
- 24 Account Codes
- 24 In/Out of Group
- 24 Locking your Station
- 25 Changing your Station Passcode