advertisement
▼
Scroll to page 2
of
48
iK81 / iK42 USER GUIDE
Load Matching
Each output of the device can be optimised to drive either a low impedance load (e.g. 2, 4 or 8 Ohms), or a Constant Voltage
(C.V.) using the Load parameter in the Output menu. There are several C.V. settings (25V, 70V and 100V Line) which determine the maximum RMS voltage that the amplifier will produce. Select the one which is appropriate for the installation. A number of low impedance settings (depending on the model) are also available. Although it is not critical that this setting matches the impedance of the connected load, this will maximise the power that is available for the load.
iK81 / iK42 User Guide V1.0
15
advertisement
Related manuals
advertisement
Table of contents
- 2 Martin Audio iKon Amplifier User Guide
- 2 Contents
- 5 IMPORTANT SAFETY INSTRUCTIONS
- 6 CONSIGNES DE SÉCURITÉ IMPORTANTES
- 6 AVERTISSEMENT DE SECURITE
- 7 COMPLIANCE
- 7 FOR CUSTOMERS IN EUROPE
- 7 FOR CUSTOMERS IN THE USA
- 8 FOR CUSTOMERS IN CANADA
- 8 Thanks and Unpacking
- 8 Unpacking the Martin Audio iK42/iK81 Series Amplifier
- 9 INSTALLATION INSTRUCTIONS
- 9 Mechanical Installation
- 10 AC Power Connection
- 11 The User Guide
- 12 Introduction and Key Features
- 12 Introduction
- 12 Key Features
- 14 Audio Connections
- 14 Input Connections
- 14 Using unbalanced connections
- 14 Amplifier Output Connections
- 16 Load Matching
- 17 Panel Layouts
- 20 Quick start
- 20 Loading XE500 (or XE300 Bi‐amp) Presets
- 21 Loading XE300 Passive Presets
- 23 Operation
- 23 Starting up the unit
- 23 Overview of Modules, Presets Components and Snapshots
- 24 Navigation
- 25 The Home Page
- 25 Drive Modules
- 25 Drive Module Presets
- 25 Component Presets
- 25 Factory Module Presets
- 26 Storing Module Presets
- 26 Recalling Module Presets
- 26 Recalling Components
- 27 Input
- 27 AES3 Inputs
- 27 Dante™ Inputs
- 27 Automatic Input Selection (Fallover)
- 27 Gain and Polarity
- 28 Delay
- 28 High Pass Filter
- 28 Parametric Equalisation
- 28 FIR Shelving EQ
- 28 Parametric Filters
- 28 Routing
- 29 Output
- 29 Gain and Polarity
- 29 Delay
- 29 High and Low pass Filters
- 29 LIR Crossover Filtering
- 29 Parametric Equalisation and All‐Pass Filters
- 29 Limiters
- 30 VX Limiter
- 30 Tmax Thermal Limiter
- 30 Xmax Excursion Limiter
- 30 Bridge
- 31 Routing
- 31 Driver
- 32 Utility Pages
- 32 Screen Contrast
- 32 Stereo Linking
- 32 Current Ethernet IP Address
- 32 IP Mode
- 32 IP Static
- 32 Store Snapshot
- 32 Recall Snapshot
- 32 Bandwidth Units
- 32 Aux Style
- 33 External Breaker Protection (EBP)
- 33 Ethernet
- 33 Ethernet configurations
- 33 AUTO‐IP
- 33 Static‐IP
- 33 IP Troubleshooting
- 34 Snapshots
- 34 AUX Port
- 35 Latency delay
- 36 Secure Mode
- 36 Overlay Flush
- 36 Revert to Factory Settings
- 36 Protection Systems
- 36 Summary of Protection Indication
- 37 Incident Reporting
- 37 Fault Relay
- 37 Performance Logging
- 38 Vu‐Net
- 39 Processing Block Diagram
- 40 Input Menu Map
- 41 Output Menu Map
- 42 Utility Menu Map
- 43 EQ and Filter Response Graphs
- 46 Technical Specifications
- 46 General
- 46 Audio
- 46 Digital processing
- 47 Power Output iK
- 47 Power supply
- 47 Protection systems
- 47 Power distribution protection systems
- 47 Monitoring and logging
- 48 Physical
- 48 Options