Advanced Features - Device Auto Connect. iogear GUIP204

28

Advanced Features - Device Auto Connect

There are two ways to automatically connect

USB devices: automatic connection by device or automatic connection by USB port.

Automatic Connection by Device

Select the device, right-click and check

“Connect this device when application starts”.

Once enabled, the particular USB device will be connected automatically when:

1. The USB server software starts up and the device is powered-on and Free

2.

3.

The USB server software is already running and you turn on the device

The USB server software is already running and the device status changes to Free

However, if the user manually disconnects the device later, it will NOT be automatically connected again until the software has been restarted.

29

Automatic Connection by USB Port

Select the USB server on the tree view and right-click on the icon to bring up the Server

Configurations.

When this function is enabled for a specific port, the

USB device will be connected automatically when:

However, if the user manually disconnects the device later, it will NOT be automatically connected again until the software has been restarted.

1.

2.

3.

The USB server software starts up and the device is already plugged into the port

The USB server software is already running and you plug in the device

The USB server software is already running and the device status changes to Free

30 31