advertisement
www.seagate.com
SATA Interface
4.3
Supported ATA commands
The following table lists SATA standard commands that the drive supports.
For a detailed description of the ATA commands, refer to the Serial ATA International Organization:
Serial ATA Revision 3.2 ( http://www.sata-io.org
).
Table 12 SATA standard commands
Command name
Check Power Mode
Device Configuration Freeze Lock
Device Configuration Identify
Device Configuration Restore
Device Configuration Set
Device Reset
Download Microcode
Execute Device Diagnostics
Flush Cache
Flush Cache Extended
Format Track
Identify Device
Idle
Idle Immediate
Initialize Device Parameters
Read Buffer
Read DMA
Read DMA Extended
Read DMA Without Retries
Read Log Ext
Read Multiple
Read Multiple Extended
Read Native Max Address
Read Native Max Address Extended
Read Sectors
Read Sectors Extended
Read Sectors Without Retries
Read Verify Sectors
Read Verify Sectors Extended
Read Verify Sectors Without Retries
Recalibrate
Security Disable Password
Security Erase Prepare
Security Erase Unit
Security Freeze
Security Set Password
Security Unlock
Seek
Command code (in hex)
F8
H
27
H
20
H
24
H
21
H
40
H
42
H
25
H
C9
H
2F
H
C4
H
E1
H
91
H
E4
H
C8
H
29
H
F4
H
F5
H
F1
H
F2
H
70
H
41
H
10
H
F6
H
F3
H
EA
H
50
H
EC
H
E3
H
08
H
92
H
90
H
E7
H
E5
H
B1
H
/ C1
H
B1
H
/ C2
H
B1
H
/ C0
H
B1
H
/ C3
H
Seagate SkyHawk Product Manual, Rev. L 32
www.seagate.com
Table 12 SATA standard commands (continued)
Command name
Set Features
Set Max Address
Note: Individual Set Max Address commands are identified by the value placed in the Set Max Features register as defined to the right.
Set Max Address Extended
Set Multiple Mode
Sleep
S.M.A.R.T. Disable Operations
S.M.A.R.T. Enable/Disable Autosave
S.M.A.R.T. Enable Operations
S.M.A.R.T. Execute Offline
S.M.A.R.T. Read Attribute Thresholds
S.M.A.R.T. Read Data
S.M.A.R.T. Read Log Sector
S.M.A.R.T. Return Status
S.M.A.R.T. Save Attribute Values
S.M.A.R.T. Write Log Sector
Standby
Standby Immediate
Write Buffer
Write DMA
Write DMA Extended
Write DMA FUA Extended
Write DMA Without Retries
Write Log Extended
Write Multiple
Write Multiple Extended
Write Multiple FUA Extended
Write Sectors
Write Sectors Without Retries
Write Sectors Extended
Write Uncorrectable
Command code (in hex)
EF
H
F9
H
Address:
Password:
Lock:
Unlock:
Freeze Lock:
E0
H
E8
H
CA
H
35
H
3D
H
CB
H
3F
H
C5
H
39
H
CE
H
30
H
31
H
34
H
45
H
37
H
C6
H
E6
H
B0
H
/ D9
H
B0
H
/ D2
H
B0
H
/ D8
H
B0
H
/ D4
H
B0
H
/ D1
H
B0
H
/ D0
H
B0
H
/ D5
H
B0
H
/ DA
H
B0
H
/ D3
H
B0
H
/ D6
H
E2
H
00
H
01
H
02
H
03
H
04
H
SATA Interface
Seagate SkyHawk Product Manual, Rev. L 33
advertisement
Related manuals
advertisement
Table of contents
- 6 Seagate® Technology Support Services
- 7 Introduction
- 8 About the SATA interface
- 9 Drive Specifications
- 9 Specification summary tables
- 13 Formatted capacity
- 13 LBA mode
- 13 Default logical geometry
- 13 Seek time
- 14 Start/stop times
- 14 Power specifications
- 14 Power consumption
- 16 Typical current profile
- 16 Conducted noise
- 16 Voltage tolerance
- 17 Power-management modes
- 17 Environmental specifications
- 17 Drive case temperature
- 17 Temperature
- 18 Temperature gradient
- 18 Humidity
- 18 Altitude
- 18 Shock
- 19 Vibration
- 19 Acoustics
- 19 Test for Prominent Discrete Tones (PDTs)
- 20 Electromagnetic immunity
- 20 Reliability - Mean Time Between Failure
- 20 Storage
- 20 Warranty
- 21 Agency and Safety Certifications
- 21 Safety certification
- 21 Electromagnetic compatibility
- 21 Electromagnetic compliance
- 22 European Union (EU) CE Marking Requirements
- 22 Australian RCM Compliance Mark
- 22 Canada ICES
- 22 South Korean KC Certification Mark
- 22 Morocco Commodity Mark
- 23 Taiwanese BSMI
- 23 FCC verification
- 23 Environmental protection
- 23 European Union Restriction of Hazardous Substance Law
- 23 Restriction of Hazardous Substances in Electrical and Electronic Equipment
- 24 China Requirements —China RoHS
- 25 Taiwan Requirements — Taiwan RoHS
- 25 Corrosive environment
- 26 Configuring and Mounting the Drive
- 26 Handling and static-discharge precautions
- 26 Configuring the drive
- 26 SATA cables and connectors
- 27 Drive mounting
- 32 SATA Interface
- 32 Hot-Plug compatibility
- 32 SATA device plug connector pin definitions
- 33 Supported ATA commands
- 35 Identify Device command
- 39 Set Features command
- 40 S.M.A.R.T. commands