Firmware update. EuroLite DMX OPERATOR 1610
Add to My manuals20 Pages
EuroLite DMX OPERATOR 1610 gives you full control over your lightshow, allowing you to create dynamic effects for any occasion. With 160 channels across 16 devices, you can effortlessly manage complex lighting setups. Store and recall up to 16 scenes and 16 chases with 200 scenes each, giving you a vast array of lighting options at your fingertips.
advertisement
Firmware update
The internal software (firmware) of the controller can be updated. New versions of the firmware will include new features, bug fixes and the optimization of current processes. We suggest to always operating the device with the latest firmware to ensure the highest level of functionality. Check www.eurolite.de
from time to time for further information. The installation procedures may vary slightly from those described in this user manual; please note the instructions that will be included in the download package. Follow the steps below to update the firmware:
1.
Download the firmware from the internet www.eurolite.de
download section of the product.
2.
Create a folder “ led_operator “ on the root directory of a USB memory device.
3.
Copy and extract the firmware to the folder on the USB memory device.
4.
Connect the USB memory device with the new firmware to the controller’s USB port.
5.
Keep the three buttons EDIT/REC , DEL/CLEAR and ⊳ pressed simultaneously and switch on the controller.
6.
Keep the buttons pressed until the display indicates ” UP-“. Then press any button to start the update procedure.
7.
As soon as the new firmware has been programmed, the display shortly inserts “ ok “. Turn the controller off and on again. The update procedure is complete and the USB memory device can be removed
Reset to factory settings
1.
Turn off the controller.
2.
Keep the three buttons EDIT/REC , RUN MODE and DEL/CLR pressed simultaneously and switch on the controller.
3.
The display shortly indicates ” Rest “ and then “ ok “ as soon as the factory settings are loaded.
CLEANING AND MAINTENANCE
The product is maintenance-free, except for occasional cleaning. You can use a lint-free, slightly dampened cloth for cleaning. Refer all servicing to qualified personnel.
TECHNICAL SPECIFICATIONS
Power supply:
Power consumption:
100-240 V AC, 50/60 Hz via included power adapter (9 V/800 mA)
<10 W
Number of control channels: 160
Storable scenes: 16
Storable chases: 16 with 200 steps each
Sound-control:
DMX512 output: via built-in microphone or audio input
3-pin XLR connector
Dimensions (L x W x H): 140 x 310 x 75 mm
Weight: 1.5 kg
Specifications are subject to change without notice due to product improvements.
19 • EN
Eurolite is a brand of Steinigke Showtechnic GmbH Andreas-Bauer-Str. 5 97297 Waldbüttelbrunn Germany
D00117017 Version 1.0 Publ. 24/05/2018
advertisement
Related manuals
advertisement
Table of contents
- 3 EINFÜHRUNG
- 3 Produktmerkmale
- 4 WICHTIGE SICHERHEITSHINWEISE
- 5 BEDIENELEMENTE UND ANSCHLÜSSE
- 6 INBETRIEBNAHME
- 6 DMX512-Anschluss
- 6 Stromversorgung herstellen
- 7 BEDIENUNG
- 7 Programmiermodus aktivieren
- 7 Szenen programmieren
- 7 Lauflicht (Chase) programmieren
- 8 Lauflicht aufrufen
- 9 Strobe-Effekt
- 9 Blackout (Dunkelschaltung)
- 9 Datensicherung
- 9 Daten laden
- 10 Firmware aktualisieren
- 10 Zurücksetzen auf Werkseinstellungen
- 10 REINIGUNG UND WARTUNG
- 10 TECHNISCHE DATEN
- 12 INTRODUCTION
- 12 Product features
- 13 IMPORTANT SAFETY INSTRUCTIONS
- 15 SETUP
- 15 DMX512 connection
- 15 Power supply
- 16 OPERATION
- 16 Enabling programming mode
- 16 Programming scenes
- 16 Programming chases
- 17 Playing chases
- 18 Strobe effect
- 18 Blackout
- 18 Data backup
- 18 Data import
- 19 Firmware update
- 19 Reset to factory settings
- 19 CLEANING AND MAINTENANCE
- 19 TECHNICAL SPECIFICATIONS