Quick Configuration. Sans Digital ACCUNAS AN2L

3.2 Quick Configuration

Please follow the step-by-step guide in Quick Configuration to complete the settings of the

AN2L. If you have any questions during web administration, please click the help button on the top right hand corner of the page.

Step 1. Enter the server name.

Step 2. Change the administrator password or select to use the original password.

- 38 -

Step 3. Enter the date, time and select the time zone for the server.

Step 4. Select the language the server uses to display files and directories. The default setting is English .

Step 5. Enter the IP address, subnet mask and default gateway for the server.

Note:

1. Please contact your ISP or network administrator for the IP address of primary and secondary DNS servers. When THE AN2L plays the role as a terminal and needs to perform independent connection, e.g. BT download, you must enter at least one DNS server IP for proper URL connection. Otherwise, the function may not work properly.

2. If you select to obtain IP address via DHCP, there is no need to configure the primary and secondary DNS servers. You can enter “0.0.0.0” in the settings.

- 39 -

Step 6. Initialize disk volume in AN2L for the first time configuration.

Step 7. When AN2L is initialized, the basic settings will be shown.

- 40 -