advertisement
CD/VCD/MP3-CD Operation
Select a desired track/passage
To search for a particular passage during playback
●
Press à or á to select 4 different search speed.
➜
" FRX1 "; " FRX2 "; " FRX3 " or " FRX4 " will be displayed on the TV screen when you select a fast rewind search.
➜
" FFX1 "; " FFX2 "; " FFX3 " or " FFX4 " will be displayed on the TV screen when you select a fast forward search.
➜
Normal playback will begin at the end of the fast rewinding or forwarding of the selected track.
●
Play returns to normal when PLAY ÉÅ is pressed or when a new track is selected.
To select a desired track
●
Press í or ë repeatedly (or Digits 0–9 on the remote control) until the desired track appears on the display.
●
If playback is stopped, press PLAY ÉÅ to start playback.
Note:
– Maximum track selection from digital keys on the remote control is 199 for MP3-CD and 99 for
VCD/CD.
For MP3-CD only
To select a desired Album
●
Press ALBUM / + ( à or á ) repeatedly until the desired Album appears on the display.
➜
ALB
will start flashing.
➜
“
AXX T001
” will be displayed after the album name scrolled through the display briefly.
To select a desired Title
●
Press TITLE / + ( í or ë ) repeatedly until the desired Title appears on the display.
●
Use the digital keys on the remote control to select the track under current Album directly.
➜
TITLE
will start flashing.
➜
“
A01 TXXX
” will be displayed after the title name scrolled through the display briefly.
Note:
– "
A
" represents ALBUM and "
T
" represents
TRACK, "
XX
" or "
XXX
" is the current selected
Album or Track number.
Programming the disc tracks
Programming tracks is possible when playback is stopped. Up to 99 tracks can be stored in the memory in any order.
1 Load the desired discs on the disc tray (refer to
“Loading Discs”).
2 Press the VCD (CD 1•2•3) button to select the disc tray.
➜
Programming can only be done on the selected disc.
3
Press PROG to start programming.
➜
PROG
will start flashing.
➜
It will cancel any previously programmed tracks and selected repeat mode.
4 Press í or ë repeatedly (or Digits 0–9 on the remote control) to select the desired track.
¶
For MP3-CD, press ALBUM / + and TITLE
/ + to select the desired Album and Title for programming.
5 Press PROG to store the track.
¶
Repeat steps 3–5 to store other tracks.
6 Press PLAY ÉÅ to start programme playback.
➜
"
PLAY PROGRAM
" will be displayed.
●
To end programming without starting playback, press Ç once .
➜
The total number of tracks programmed and the total playing time will appear on the display.
Notes:
– Programme cannot be used for VCDs when PBC is switched on. Switch off PBC before storing tracks.
– For MP3-CD, total playing time will not be shown.
– If the total playing time is more than " 99:59 ", then " --:-" will appear on the display instead of the total playing time.
– If you attempt to programme more than 99 tracks, "
PROGRAM FULL
" will be displayed.
– During programming, if no button is pressed within 20 seconds, the system will exit the
Programme mode automatically.
To review the programme
●
Stop playback and press í or ë repeatedly.
●
To exit review mode, press Ç .
18
3140 115 30491
advertisement
Related manuals
advertisement