5.10 Viewing therapy data and device information. Lowenstein Medical prisma20A, prisma25S, prisma20C, prisma25ST, prisma30ST, prismaCR, prismaLAB, prisma25S-C

32

|

EN

5 Operation

5.9.2 Switching off the alarm

Requirement

The alarm is ringing.

1. To snooze the alarm for 5 minutes, press the Pause field.

2. To turn the alarm off for today, press the Off field.

The alarm will go off the following day again at the set wake-up time.

5.9.3 Deactivating the alarm

Requirement

• The therapy device is in Standby mode.

• The alarm is switched on

(see "5.9.1 Setting the wake-up time and switching on the alarm", page   31)

.

1. Press the time display on the start screen.

or

Press the menu button .

2. Press the Time field.

3. Press the Wake-up time field.

4. Press the alarm button .

5. Confirm the setting with the button.

6. To return to the start screen, press the Home button .

5.10 Viewing therapy data and device information

In the info menu you can view information about the therapy (usage time, mask fit, therapy quality) within a selectable period of time and general information about the device and network.

Requirement

The therapy device is in Standby mode.

1. Press the info button .

5 Operation

2. If necessary: To view therapy data from a night other than the previous night, select the desired date in the list .

3. If necessary: To view a longer period of time, navigate to the second screen .

EN

|

33

5 Operation

4. Select the required period.

5. To go back a screen, press the arrow key .

34

|

EN

6. If required, save all the data to the SD card

(see " Saving the therapy data manually", page   36)

.

7. To view the device information, navigate to the next screen using the arrow keys

and .

8. To exit the info menu, press the Home button .