advertisement
10. Calibration
4.000V 0.0000A
10. Calibration
10.1 Calibration Steps
10.1.1 Turn on the Phone.
10.1.2 Execute “HK_24.exe”
Copyright © 2007 LG Electronics. Inc. All right reserved.
Only for training and service purposes
- 87 LGE Internal Use Only
10. Calibration
10.1.3 Click “SETTING” Menu
10.1.4 Setup “Ezlooks” menu such as the following figure
LGE Internal Use Only - 88 Copyright © 2007 LG Electronics. Inc. All right reserved.
Only for training and service purposes
10.1.5 Setup “Line System” menu such as the following figure
10. Calibration
Adjust the number of times.
10.1.6 Setup Logic operation such as the following figure.
Operation Mode
1. By-Pass: not control by GPIB
2. Normal : control by GPIB
Setup UART Port
PWR : Power Supply
CELL :Call-Test Equipment
Copyright © 2007 LG Electronics. Inc. All right reserved.
Only for training and service purposes
- 89 LGE Internal Use Only
10. Calibration
10.1.7 Select “MODEL”.
10.1.8 Click “START” for RF calibration
10.1.9 RF Calibration finishes.
LGE Internal Use Only - 90 Copyright © 2007 LG Electronics. Inc. All right reserved.
Only for training and service purposes
10.1.10 Calibration data will be saved to the following folder.
10. Calibration
Saving format: year/month/day_PASS
Notices:
1. The state of Phone is “ test mode “ during the CALIBRATION.
2. Calibration program automatically changes either “normal mode” or “ptest mode”.
3. RF Calibration steps as follow:
TX Channel compensation: GSM850->PCS
RX Channel compensation: GSM850->PCS
4. Phone Operation Mode
Copyright © 2007 LG Electronics. Inc. All right reserved.
Only for training and service purposes
- 91 LGE Internal Use Only
advertisement
Related manuals
advertisement
Table of contents
- 6 1. INTRODUCTION
- 6 1.1 Purpose
- 6 1.2 Regulatory Information
- 8 1.3 ABBREVIATION
- 10 2. PERFORMANCE
- 10 2.1 Product Name
- 10 2.2 Supporting Standard
- 10 2.3 Main Parts: GSM Solution
- 11 2.4 H/W Features
- 15 3. TECHNICAL BRIEF
- 15 3.1 Digital Main Processor(PMB7880)
- 23 3.2 Power Amplifier Module (SKY77318)
- 25 3.3 26 MHz Clock (DCXO)
- 26 3.4 RTC(32.768KHz Crystal)
- 27 3.5 LCD Interface(3-wire SPI interface)
- 29 3.6 SIM Card Interface
- 30 3.7 KEYPAD Interface
- 31 3.8 Battery Charging Block Interface
- 32 3.9 RF Interface
- 34 3.10 Audio Interface
- 38 3.11 Key LED Interface
- 39 3.12 Vibrator Interface
- 40 3.13 Memory Interface
- 41 3.14 Power Block Interface
- 43 Function difference
- 44 3.16 BOM difference
- 45 4. TROUBLE SHOOTING
- 45 4.1 Trouble Test Set-up
- 46 4.2 Power On Trouble
- 48 4.3 Charging Trouble
- 50 4.4 Vibrator Trouble
- 52 4.5 SIM Card Trouble
- 54 4.6 KEY backlight Trouble
- 55 4.7 RTC Trouble
- 56 4.8 LCD Trouble
- 58 4.9 Speaker Trouble
- 60 4.10 Receiver Trouble
- 61 4.11 Headphone Trouble
- 63 4.12 Microphone Trouble
- 64 4.13 RF Components
- 65 4.14 RX Receiver Part
- 68 4.15 TX Transmitter Part
- 72 5. DOWNLOAD
- 72 5.1 Download Setup
- 73 5.2 Download Process
- 78 6. BLOCK DIAGRAM
- 80 7. CIRCUIT DIAGRAM
- 84 8. BGA IC Pin Check
- 86 9. PCB LAYOUT
- 88 10. Calibration
- 88 10.1 Calibration Steps
- 93 11. Stand-alone Test
- 93 11.1 Test Program Setting
- 95 11.2 Tx Test
- 96 11.3 Rx Test
- 98 REPLACEMENT PART LIST
- 98 12.1 Exploded View
- 100 12.2 Replacement Parts
- 112 12.3 Accessory