1. Networking
  2. Gemtek Technology
  3. MXF-R911129

Hardware Reset. Gemtek Technology MXF-R911129, MXF-R910625

Add to My manuals
45 Pages

advertisement

Hardware Reset. Gemtek Technology MXF-R911129, MXF-R910625 | Manualzz

P380 Users guide

Hardware Reset

To reset the P380 device back to factory settings, except for web management, hardware reset will be another choice. There is no any physical button offered in hardware reset. For convenience sake, P380 offers the hardware reset processes as followed.

1. Unplug the power cable.

2. Re-connect the power cable.

3. Please wait for 5 to 6 seconds. At this moment, please disconnect the power cable.

4. Reconnect the cable on again and device will restart. This procedure will reset the settings back to default configuration. The device IP will be reset to the default IP.

~ Note: The length of the time allowed for hardware reset is only around two seconds. If it is missed, please restart the process.

~ Note: All custom P380 configuration settings will be reset to the default values.

Write down any configuration settings, which should be preserved, and set up them, when P380 starts after reset. Initial P380 setup is described in the “Starting

Up” chapter of this manual.

36

advertisement

Related manuals

Gemtek Systems P-380 User's Guide

Gemtek Systems

P-380

  • User's Guide
Creative P380 User's Manual

Creative

P380

  • User's Manual
Liberty Pumps P382PRG101SD-2/A2W ProVore® 380 Series 1 hp Sewage System Installation manual

Liberty Pumps

P382PRG101SD-2/A2W

  • Installation manual
Elipson Chroma 200 Black Platine vinyle Owner's Manual

Elipson

Chroma 200 Black

  • Owner's Manual
Hard Reset DEXP Ursus P380

DEXP

Ursus P380

  • Hard reset manual
Liberty Pumps P382LE41/A2 Pro380 Series 4/10 HP Submersible Pre-Assembled Simplex Sewage System Specification

Liberty Pumps

P382LE41/A2

  • Specification
DEXP Ursus P380 Manuel de réinitialisation dure

DEXP

Ursus P380

  • Hard reset manual
Liberty Pumps X8 8 in. Basin Extension Installation manual

Liberty Pumps

X8

  • Installation manual
Yamaha NS-P380 OWNER'S MANUAL

Yamaha

NS-P380

  • Owner's Manual

Frequently Answers and Questions

What is the IP address of the device?
The default IP address is 192.168.1.245.
What is the default username and password?
The default username is 'admin' and the default password is 'password'.
How do I reset the device to factory settings?
Press and hold the reset button for 10 seconds until the device reboots.
How do I update the firmware of the device?
Download the latest firmware from the manufacturer's website and follow the instructions in the user manual to update the firmware.
How do I connect the device to a wireless network?
Go to the 'Wireless' page in the web interface and select the desired wireless network from the list of available networks. Enter the password for the network and click 'Connect'.
How do I create a new wireless network?
Go to the 'Wireless' page in the web interface, click on the 'Create New Network' button, and enter the desired network name, password, and security settings. Click 'Save' to create the new network.
How do I change the default IP address of the device?
Go to the 'Network' page in the web interface, click on the 'LAN' tab, and enter the desired IP address in the 'IP Address' field. Click 'Save' to apply the changes.
How do I open ports on the device?
Go to the 'Firewall' page in the web interface, click on the 'Port Forwarding' tab, and enter the desired port numbers and IP addresses. Click 'Add' to open the ports.
How do I create a DMZ on the device?
Go to the 'Firewall' page in the web interface, click on the 'DMZ' tab, and enter the desired IP address of the computer that you want to place in the DMZ. Click 'Enable' to create the DMZ.

advertisement