Introduction. A-Neu Video ANI-MOD Series, ANI-MOD3232, ANI-MOD88

TABLE OF CONTENTS

CONTENTS

Introduction ...................................................................................1

About Modular Matrix Switcher System .........................................2

ANI-MOD signal card (changeable cards) ......................................2

Package Contents ........................................................................2

Speci fi cations ...............................................................................3

Main Unit ....................................................................................3

Changeable Cards ......................................................................3

ANI-IN-DVI & ANI-OUT-DVI ............................................3

ANI-IN-HDMI & ANI-OUT-HDMI ......................................4

ANI-IN-VGA & ANI-OUT-VGA .........................................4

ANI-IN-SDI & ANI-OUT-SDI ..........................................4

ANI-IN-HDBaseT & ANI-OUT-HDBaseT ........................5

Front Panel Operation ..................................................................6

External Connection ....................................................................8

Introduction of the Input and Output Connectors ......................9

Changeable Cards Introduction & Installation ...........................10

ANI-IN-DVI & ANI-OUT-DVI .............................................10

ANI-IN-HDMI & ANI-OUT-HDMI ......................................11

ANI-IN-VGA & ANI-OUT-VGA .......................................12

ANI-IN-SDI & ANI-OUT-SDI ..........................................13

ANI-IN-HDBaseT & ANI-OUT-HDBaseT .......................14

Connection of RS-232 Communication Port .........................15

Connection with Computer ....................................................15

Connection of TCP/IP Port (Optional Function) .......................15

System Diagram ........................................................................16

Remote Control ..........................................................................17

Remote Command System from a Personal Computer ...........18

Command Codes .......................................................................19

Communication Protocol Command and Command Codes .......20

GUI Interface .............................................................................21

TCP/IP Control ...........................................................................23

Safety Operation Guide .............................................................26

Troubleshooting & Maintenance ................................................26

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this equipment:

• Always follow basic safety precautions to reduce the risk of fi re, electrical shock and injury to persons.

• To prevent fi re or shock hazard, do not expose the unit to rain, moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any openings or empty slots in the unit, as you may damage parts inside the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the

PSU if it is damaged.

• Do not allow anything to rest on the power cabling or allow any weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or openings in the unit housing that provide ventilation and allow for suf fi cient space for air to circulate around the unit.

DISCLAIMERS

The information in this manual has been carefully checked and is believed to be accurate. We assume no responsibility for any infringements of patents or other rights of third parties which may result from its use.

We assume no responsibility for any inaccuracies that may be contained in this document. We make no commitment to update or to keep current the information contained in this document.

We reserve the right to make improvements to this document and/ or product at any time and without notice.

Dear Customer

Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference.

INTRODUCTION

Congratulations on your purchase of one of A-Neuvideo’s ANI-

MOD series of matrix switchers. This product has been specially engineered to provide a modular method of converting video signals from one format to another. The four different models provide ample fl exibility for different sizes of operations, allowing you to select and customize the model which will best meet your needs. A variety of modular input and output cards allow you to use all current video signal formats and connectors on the market.

COPYRIGHT NOTICE

No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or any of its part translated into any language or computer fi le, in any form or by any means

— electronic, mechanical, magnetic, optical, chemical, manual, or otherwise — without the express written permission and consent.

© Copyright 2011. All Rights Reserved.

Version 2.9 FEB 2014

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be trademarks of the companies with which they are associated.

1