advertisement
FRONT PANEL
Buttons Function Description
Undo Button: To eliminate the last command and return the unit to the status that existed before the last command performed.
Backspace Button:
To backspace the latest input button; speci fi cally used for removing the last character button in a two digit channel selection input. It does not undo the last command button pressed.
Switching Operation:
From the front control panel, all of the ANI-MOD matrix operations can be controlled directly and rapidly. To do so, follow the basic format of pressing the buttons, in the order below.
• ANI-MOD88: “Input Channel” + “Switch Mode” +“Output Channel”
• ANI-MOD1616/ANI-MOD3232/ANI-MOD6464: “Input Channel” + “Switch Mode” +“Output Channel”+“Enter”
1) “Switch Mode”:
Refers to the Audio & Video synchronal or break away switching modes, which include the buttons
“AV”, “Audio”,
“Video”.
2) “Input Channel”:
Refers to the channel that is to be directed to an output. Depress the input channel button number for the channel to be controlled. For two digit numbers, the digits must be pressed within fi ve seconds of each other, or the operation will be cancelled. The input channels on the rear panel are counted from left to right, top to bottom.
3) “Output Channel”:
Refers to the channel that will be receiving the input. Depress the output channel button for the channel to be controlled. The output channels on the rear panel are counted from left to right, top to bottom.
4)
Remember that in cases where the input/output channel is a two digits number, the input delay time between two numbers must less than 5 seconds; otherwise the operation will be cancelled.
8
advertisement
Related manuals
advertisement
Table of contents
- 3 Introduction
- 4 About Modular Matrix Switcher System
- 4 ANI-MOD signal card (changeable cards)
- 4 Package Contents
- 5 cations
- 5 Main Unit
- 5 Changeable Cards
- 5 ANI-IN-DVI & ANI-OUT-DVI
- 6 ANI-IN-HDMI & ANI-OUT-HDMI
- 6 ANI-IN-VGA & ANI-OUT-VGA
- 6 ANI-IN-SDI & ANI-OUT-SDI
- 7 ANI-IN-HDBaseT & ANI-OUT-HDBaseT
- 8 Front Panel Operation
- 10 External Connection
- 11 Introduction of the Input and Output Connectors
- 12 Changeable Cards Introduction & Installation
- 12 ANI-IN-DVI & ANI-OUT-DVI
- 13 ANI-IN-HDMI & ANI-OUT-HDMI
- 14 ANI-IN-VGA & ANI-OUT-VGA
- 15 ANI-IN-SDI & ANI-OUT-SDI
- 16 ANI-IN-HDBaseT & ANI-OUT-HDBaseT
- 17 Connection of RS-232 Communication Port
- 17 Connection with Computer
- 17 Connection of TCP/IP Port (Optional Function)
- 18 System Diagram
- 19 Remote Control
- 21 Command Codes
- 22 Communication Protocol Command and Command Codes
- 23 GUI Interface
- 25 TCP/IP Control
- 28 Safety Operation Guide
- 28 Troubleshooting & Maintenance