- Computers & electronics
- Computer components
- System components
- Motherboards
- Biostar
- A55MD2
- Owner's manual
advertisement
▼
Scroll to page 2
of
51
Motherboard Manual
Step 4:
Hold the CPU down firmly, and then close the lever to locked the position
Step 1:
Place the heatsink and fan assembly onto the retention frame. Match the heatsink clip with the socket mounting-lug. Hook the spring clip to the mounting-lug.
Step 2:
On the other side, push the retention clip straight down to lock into the plastic lug on the retention frame, and then press down the locker until it stops.
6
Note1:
Do not forget to connect the CPU fan connector.
Note2:
For proper installation, please kindly refer to the installation manual of your CPU heatsink.
advertisement
Related manuals
advertisement
Table of contents
- 3 Chapter 1: Introduction
- 3 Before You Start
- 3 Package Checklist
- 4 Motherboard Specifications
- 5 Rear Panel Connectors
- 6 Motherboard Layout
- 7 Chapter 2: Hardware Installation
- 7 Install Central Processing Unit (CPU)
- 8 Install a Heatsink
- 9 Connect Cooling Fans
- 10 Install System Memory
- 12 Expansion Slots
- 13 Jumper Setting
- 14 Headers & Connectors
- 18 Chapter 3: UEFI BIOS & Software
- 18 UEFI BIOS Setup
- 18 BIOS Update
- 23 Software
- 25 Chapter 4: Useful Help
- 25 Driver Installation
- 26 AMI BIOS Beep Code
- 26 Troubleshooting
- 28 RAID Functions
- 31 AMD DUAL Graphics Technology
- 34 Appendix: Specifications In Other Languages
- 34 Arabic
- 36 French
- 38 German
- 40 Italian
- 42 Japanese
- 44 Polish
- 46 Portuguese
- 48 Russian
- 50 Spanish