advertisement
BT-350 Operator Manual 9
Section 2
Introduction
2.1 General
This chapter provides a general description of the BT-350 monitor including:
Brief Device Description
Product Features
Model Configurations
2.2 Brief Device Description
The BT-350 is a microprocessor-based fetal monitor, providing continuous monitoring, display, and recording of fetal heart rate (FHR) and uterine contraction (UC) for antepartum testing and monitoring.
2.3 Intended Use
The BT-350 is a Prenatal Monitoring System for non-invasively measuring and showing graphically maternal abdominal contractions and the fetal heart rate by means of display on a non-permanent graphical display and on a strip chart recorder. This data is intended to aid in assessing the well being of the fetus during the final trimester of pregnancy (Non-Stress Test). This device is for use only by trained medical personnel located in hospitals, clinics, doctor’s offices and in the patient’s home.
2.4 Product Features
The monitored data can be recorded continuously or intermittently on a strip chart recorder at the operator’s discretion. The recorded information includes graphic trend data and text information of monitor hardware and software configuration, date and time, patient identification, changes to operational settings, clinician and patient event marks.
P/N : OPM(BT-350)EN www.bistis.co.kr Rev. 06 (2013.04.12)
BT-350 Operator Manual 10
2.5 Options and Accessories
Accessory Name
Doppler Probe
Description
Ultrasound Transducer for Measuring
FHR
(IPX8 : Waterproof)
UC Probe
Pressure Sensor (Tocotonometer) for
Measuring Uterine contraction
(IPX8 : Waterproof)
Event Marker Used for a Fetal Movement event
AST Probe
(Option)
Acoustic Stimulation
Test Probe
Z-folded type Paper Z-folder type thermal Paper
Probe Belt
Used for Holding Doppler Probe and/or UC Probe
Power Cord AC Power cord
Power Adaptor
Adaptor for transform AC Power
(100-240V ~) to DC 18V(2.5A)
(MW160, Bridge Power Corp.)
Type / model : GP270AAHC
Technical data : 1.2V X 12ea, 2600mA
(GP Batteries international Ltd.)
GP Battery
Ultrasound Gel
Ultrasound transmission gel
(Sanipia, ECOSONIC)
Table 2.1. BT-350 Accessories
P/N : OPM(BT-350)EN www.bistis.co.kr Rev. 06 (2013.04.12)
advertisement
Related manuals
advertisement
Table of contents
- 3 Operator Manual
- 5 1. SAFETY
- 5 1.1 Instructions for the Safe Operation and Use of the BT-350 Monitor
- 6 1.2 Warnings
- 9 1.4 Definitions of Symbols
- 10 2. INTRODUCTION
- 10 2.1 General
- 10 2.4 Product Features
- 12 3. INSTALLATION
- 15 4. BT-350 OPERATION
- 15 4.1 System Startup
- 15 4.1.1 Power-on Self-test
- 15 4.1.2 Configuration Settings
- 16 4.1.3 Printer paper Select
- 17 4.2 BT-350 Monitor Display Screen
- 18 4.2.1 Mode Frame
- 19 4.2.7 Status Frame
- 20 4.2.8 Patient ID
- 20 4.2.9 Time and Date
- 20 4.2.10 Message Frame
- 21 4.3 BT-350 Monitor Controls and Indicators
- 21 4.4 BT-350 Monitor Contorl Knob
- 4 Operator Manual
- 22 4.5 Data Saving
- 22 4.5.1 How to save data
- 23 4.6 Trend Mode
- 23 4.6.1 Saved Time/Date Frame
- 23 4.6.2 ID Frame
- 23 4.6.3 Data Searching Frame
- 24 5. RECORDER OPERATION
- 24 5.1 Loading Paper
- 27 6. MONITRING FETAL HEART RATE
- 29 6.2 Detail Procedure
- 31 7. UTERINE CONTRACTION(UC)
- 33 8.1 Event Marker
- 33 8.2 Clinical Event Marker
- 34 9. CLEANING AND DISINFECTION
- 34 9.1 Monitor
- 34 9.2 Transducers
- 34 9.4 Contacting components and characteristics
- 36 10. SPECIFICATIONS
- 39 11. TROUBLESHOOTING AND MAINTENANCE
- 39 11.1 Self Test
- 39 11.2 Ultrasound Transducer Test
- 40 11.4 Battery Disposal and Handling