Attaching the Infant Car Seat. Britax B-Safe Gen2 FlexFit, B-Safe Gen2 FlexFit Plus

BRITAX Child Safety, Ltd.

Attaching the Infant Car Seat

1. Ensure that the base is securely installed.

2. Place the infant car seat into the base and press down until a click is heard.

3. Pull up on both sides of the infant car seat to verify attachment.

4. Ensure that the handle is locked in position

1 (see page 35) and check that the recline angle is still correct.

Removing the Infant Car Seat

1. Pull and hold the release lever on the back of the infant car seat.

2. Lift the infant car seat up from the base.