Specifications. YAESU FT-817nd


Add to my manuals
84 Pages

advertisement

Specifications. YAESU FT-817nd | Manualzz

2

S

PECIFICATIONS

G

ENERAL

Frequency Range : Receive: 100 kHz-30 MHz

50 MHz-54 MHz

76 MHz-154 MHz

420 MHz-470 MHz

Transmit: 160-6 Meters (USA: includes 60 meters)

2 Meters

70 Centimeters (Amateur bands only)

5.1675 MHz Alaska Emergency Frequency (USA only)

Emission Modes : A1A (CW), A3E (AM), J3E (LSB/USB), F3E (FM),

F1D (9600 bps packet), F2D (1200 bps packet)

Synthesizer Steps (Min.): 10 Hz (CW/SSB), 100 Hz (AM/FM)

Antenna Impedance : 50 Ohms, Unbalanced (Front: Type BNC, Rear: Type M)

Operating Temp. Range : –10 °C to +60 °C (+14 °F to +140 °F)

Frequency Stability : ±4 ppm from 1 min. to 60 min after power on.

Supply Voltage :

@25 °C: 1 ppm/hour

±0.5 ppm/1 hour @25 °C, after warmup (with optional

TCXO-9

)

Normal: 13.8 VDC ± 15 %, Negative Ground

Operating: 8.0-16.0 V, Negative Ground

FBA-28

(w/8 “AA” Alkaline Cells): 12.0 V

FNB-85

(Ni-MH Battery Pack): 9.6 V

Current Consumption : Squelched: 250 mA (Approx.)

Receive: 450 mA

Transmit: 2.2 A (HF/145 MHz), 2.5 A (430 MHz)

Case Size (W x H x D): 135 x 38 x 165 mm (5.31” x 1.5” x 6.50”)

Weight (Approx.): 1.17 kg (2.58 lb) w/Alkaline battery, antenna, w/o Microphone

T

RANSMITTER

RF Power Output

Modulation Types

:

:

5 W (SSB/CW/FM), 1.5 W (AM Carrier) @13.8 V

SSB: Balanced Modulator

AM: Early Stage (Low Level)

FM: Variable Reactance

FM Maximum Deviation : ±5 kHz (FM-N: ±2.5 kHz)

Spurious Radiation : –50 dB (1.8-29.7 MHz)

Carrier Suppression :

–60 dB (50/144/430 MHz)

>40 dB

Opp. Sideband Supp.

: >50 dB

SSB Frequency Response : 400 Hz-2600 Hz (–6 dB)

Microphone Impedance : 200-10k Ohms (Nominal: 600 Ohms)

FT-817

ND

Operating Manual

S

PECIFICATIONS

R

ECEIVER

Circuit Type : Double-Conversion Superheterodyne

Intermediate Frequencies :1st: 68.33 MHz (SSB/CW/AM/FM); 10.7 MHz (WFM)

2nd: 455 kHz

Sensitivity : SSB/CW

100 kHz-500 kHz –

500 kHz-1.8 MHz –

1.8 MHz-28 MHz 0.25 µV

AM

32 µV –

2 µV –

FM

Squelch Sensitivity :

28 MHz-30 MHz 0.25 µV

50 MHz-54 MHz 0.2 µV

2 µV

2 µV

0.5 µV

0.32 µV

144/430 MHz 0.125 µV – 0.2 µV

(IPO, ATT off, SSB/CW/AM = 10 dB S/N, FM = 12 dB SINAD)

SSB/CW/AM FM

1.8 MHz-28 MHz 2.5 µV –

28 MHz-30 MHz 2.5 µV

50 MHz-54 MHz 1 µV

144/430 MHz

(IPO, ATT off)

0.5 µV

0.32 µV

0.2 µV

0.16 µV

Image Rejection : HF/50 MHz: 70 dB

144/430 MHz: 60 dB

IF Rejection : 60 dB

Selectivity (–6/–60 dB): SSB/CW: 2.2 kHz/4.5 kHz

AM: 6 kHz/20 kHz

FM: 15 kHz/30 kHz

FM-N: 9 kHz/25 kHz

SSB (optional

YF-122S

installed): 2.3 kHz/4.7 kHz (–66 dB)

CW (optional

YF-122C

installed): 500 Hz/2.0 kHz

CW (optional

YF-122CN

installed): 300 Hz/1.0 kHz

AF Output : 1.0 W (8 Ohms, 10% THD or less)

AF Output Impedance : 4-16 Ohms

Specifications are subject to change without notice, and are guaranteed within amateur bands only.

Frequency ranges vary according to transceiver version; check with your dealer.

FT-817

ND

Operating Manual 3

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Key Features

  • Compact and portable design for convenient field operation
  • Wide operating frequency range, covering HF/VHF/UHF bands
  • Versatile operating modes, including SSB, CW, FM, AM, and digital modes
  • Built-in spectrum scope monitor for visual signal analysis
  • Extensive memory storage and scan options for quick and efficient channel access
  • Receiver accessories for improved signal reception, including clarifier, IF shift, and noise blanker
  • ARTSTM (Auto Range Transpond System) for automatic frequency coordination during simplex operation

Related manuals

Frequently Answers and Questions

How do I connect the microphone to the transceiver?
Connect the microphone plug to the MIC connector on the front panel.
What is the operating voltage range of the transceiver?
The operating voltage range is 10.8 to 16.0 V DC.
Can I adjust the transmitter power output?
Yes, the transmitter power output can be adjusted in five levels.
What is the function of the clarifier?
The clarifier allows for precise adjustment of the receiver frequency to enhance signal intelligibility.
How do I set the operating mode?
Press the MODE button repeatedly to cycle through the available operating modes.
Download PDF

advertisement

Table of contents