advertisement
T
RANSMITTER
O
PERATION
FM T
RANSMISSION
Tone Search Scanning
In operating situations where you don’t know the CTCSS tone being used by another station, you can command the radio to listen to the incoming signal and scan in search of the tone being used.
To scan for the CTCSS tone in use:
1. Press the key momentarily, then rotate the knob, as needed, until Operating Function Row 12 [ TCH , DCH
] appears on the display.
2. Press the
(
TCH
) key to activate CTCSS Encoder/Decoder; (the “
” icon will appear on the display) and start scanning for the incoming CTCSS tone.
3. When the radio detects the correct tone, it will halt on that tone, and audio will be allowed to pass.
4. Press and hold in the
(
TCH
) key for one second; the CTCSS tone detected will be stored as the “current” tone, so it may be used for memory storage purposes, and you may now exit to normal operation.
FT-817
ND
Operating Manual 35
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Key Features
- Compact and portable design for convenient field operation
- Wide operating frequency range, covering HF/VHF/UHF bands
- Versatile operating modes, including SSB, CW, FM, AM, and digital modes
- Built-in spectrum scope monitor for visual signal analysis
- Extensive memory storage and scan options for quick and efficient channel access
- Receiver accessories for improved signal reception, including clarifier, IF shift, and noise blanker
- ARTSTM (Auto Range Transpond System) for automatic frequency coordination during simplex operation
Related manuals
Frequently Answers and Questions
How do I connect the microphone to the transceiver?
What is the operating voltage range of the transceiver?
Can I adjust the transmitter power output?
What is the function of the clarifier?
How do I set the operating mode?
advertisement