advertisement
15. Using pattern register key
Register pattern Nos. which are frequently used with the pattern register key and use them.
Patterns which have been registered can be selected by pressing only the pattern register key under the input mode.
(1) Method of register
1) Set the mode to the input mode.
When the back-light of LCD display q shows the input mode in blue color, it is possible to register patterns.
When the back-light shows the sewing mode in green color, press READY key w to change over to the input mode.
2) Call pattern register screen.
Press key (P1 to P3) @7 to which you desire to register pattern No. for as long as 3 seconds, and pattern register screen A is displayed.
3) Select pattern No.
Pattern No. B which can be used at present flashes on and off in the display. Press ITEM SELECTION key !0 , and select the pattern No. you desire to register.
When trash can is selected, register can be released.
4) Start register.
Press READY key w to start register and the screen returns to the input screen after two seconds.
Press RESET key e , and the screen returns to the former one without registering.
B
A
!0
w e q
@7
(2) Register status at the time of your purchase
Register key
P1
P2
P3
Registered pattern No.
Pattern No. 1
Pattern No. 2
Pattern No. 3
− 36 −
advertisement
Related manuals
advertisement
Table of contents
- 6 . IMPORTANT SAFETY INSTRUCTIONS
- 6 . SPECIFICATIONS
- 6 1. Subclass
- 6 2. Specifications
- 7 3. Standard sewing shape list
- 8 4. Configuration
- 9 . INSTALLATION
- 17 . PREPARATION BEFORE OPERATION
- 17 1. Lubrioation
- 17 2. Inserting the needle
- 18 3. Threading the needle-thread
- 18 4. Threading the bobbin case
- 19 5. Adjusting the bobbin thread tension
- 19 6. Installation of bobbin case
- 20 7. Installing the knife
- 21 . OPERATION OF THE SEWING MACHINE
- 21 1. Explanation of the operation panel switch
- 23 2. Basic operation of the sewing machine
- 23 3. How to use the pedal
- 25 4. Input of the presser type
- 26 5. Performing pattern selection
- 27 6. Changing needle thread tension
- 28 7. Performing re-sewing
- 29 8. Winding bobbin thread
- 30 9. Using the counter
- 31 10. Using the initial value pattern
- 32 11. Changing sewing data
- 33 12. Method of setting sewing data with/without edit
- 34 13. Sewing data list
- 40 14. Copying sewing pattern
- 41 15. Using pattern register key
- 42 16. Using parameter register key
- 43 17. Performing continuous stitching
- 45 18. Performing cycle stitching
- 47 19. Explanation of plural motions of knife
- 48 20. Method of changing memory switch data
- 49 21. Memory switch data list
- 53 . MAINTENANCE
- 53 1. Adjusting the needle-to-hook relation
- 54 2. Adjusting the needle thread trimmer
- 55 3. Adjusting the presser bar pressure
- 55 4. Adjustment of the bobbin presser unit
- 57 5. Thread tension
- 57 6. Cleaning the filter
- 57 7. Replacing the fuse
- 58 . GAUGE COMPONENTS
- 58 1. Cloth cutting knife
- 58 2. Throat plate
- 58 3. Presser
- 59 . ERROR CODE LIST
- 62 . TROUBLES AND CORRECTIVE MEASURES
- 64 . DRAWING OF THE TABLE
- 65 . INITIAL VALUE DATA FOR EACH SHAPE TABLE