advertisement
AM
PM off system heat cool
34 program hold
/return
METhoDS of opEraTion, ConT.
3. CrEaTing CuSToM prograMS
• Program times can be set in 10 minute increments.
• Program temperature can be set in increments of 1 o F (1 o C).
• After 15 seconds of inactivity during programming, the thermostat will return to
Normal Display mode.
• When setting the program time, note the AM/
PM indicator.
• Press
Hold/Return
at any time to exit Program mode.
1. Slide the system switch
to
HEAT
or
COOL
to program the corresponding system.
2. Press
Program to enter Program mode.
(The
LCD will begin to flash)
35
off system heat cool
M T W TH F
AM
PM
SA SU
1 2 3 4
HEAT COOL
36 program hold
/return
METhoDS of opEraTion, ConT.
3. Press
Up
or
Down
to change the hour. Press
Program
to save the hour and adjust the minute setting.
4. Press
Up
or
Down
to change the minute. Press
Program
to save the minute setting and adjust the temperature.
5. Press
Up
or
Down
to set the temperature.
Press
Program again to move to the next program number.
(There are 4 programs per day. If you do not wish to assign all 4 programs per day set at least 2, keeping in mind that the total program time must equal 24 hours.)
6. Repeat steps 2-5 for the remaining days.
7. To review your program settings, press
Program
repeatedly to review the customized programs.
(You can make changes at any time when the thermostat is in Program mode.)
8. Slide the system selector switch
to the opposite position and repeat steps 2-5.
37
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement