CONTROLS AND CONNECTORS
<Front> <Back>
A Power Switch (POWER)
B Auto Button (AUTO)
Adjusts Clock, Phase, H-Position and V-Position automatically.
NOTE n For best results, use the Auto Set-up in conjunction with the test pattern Test.bmp.
(See page 21 for SCREEN ADJUSTMENTS.) n The screen becomes dark for approximately five seconds during the adjustment.
C – / Contrast Button ( – / )
D + / Brightness Button ( + / )
E Menu Button (MENU)
F Input Button (INPUT)
G Remote Sensor
H Power Indicator
NOTE
Blue: Normal operation
Orange: Power Management
The monitor enters into power management mode which reduces the power consumption to less than 5W when receiving no horizontal and/or vertical sync signal.
I Optional Video Adapter Slot
J DVI-D 24pin Connector (DVI)
K D-SUB mini 15pin Connector (D-SUB)
L RS-232C Connector (RS-232C)
M Handles
N AC Connector (AC IN)
O Main Power Switch (POWER)
BEFORE YOU OPERATE THE MONITOR 6