- Computers & electronics
- Audio & home theatre
- Video switches
- Avenview
- SW-HDM3D-C6-4X4E
- Instructions manual
2.3 pANEl DESCRIpTION. Avenview SW-HDM3D-C6-4X4E, HDM3D-C6SW-R
Add to my manuals
24 Pages
Avenview HDM3D-C6SW-R is a receiver unit that pairs with the SW-HDM3D-C6-4X4E matrix switch to extend HDMI signals over a single CAT5/6 cable, supporting resolutions up to 1080p and 3D video. It features IR pass-through, allowing you to control HDMI source devices remotely. With its compact design, easy installation, and long transmission distance of up to 115 feet, this receiver offers a flexible and cost-effective solution for distributing HD content in various applications such as home theaters, conference rooms, and digital signage systems.
advertisement
2.3
pANEl DESCRIpTION
2.3.1 SW-HDM3D-C6-4X4E Front Panel
1 3
2 4
1. SOuRCE STATuS : Input source indicator lED
2. IR SENSOR: IR sensor for receiving the IR commands from IR remote
3. OuTpuT puSH BuTTON & 7-SEGMENT lED: front panel push buttons used to select the number of display channel & lED display for output ports
4. INpuT puSH BuTTON & 7-SEGMENT lED: front panel push buttons used to select the number of input source & lED display for input channels
2.3.2 SW-HDM3D-C5-4x4E Rear Panel
5 6 7 8 9 10 11 12 13
5.
7.
9. OuTpuT pORT 1-4: RJ-45 outputs for each output channel
11.
RS-232: RS-232 control port
INpuT 1-3: HDMI inputs
SySTEM IR RECEIVER: EXT. IR receiver
6. ETHERNET: Ethernet control port
8. INpuT 4 & EDID pORT: HDMI input and edid port for learning edid from display
10. IR BlASTER 1-4: 3.5MM IR blaster socket for individual HDMI source control
12. All IR OuTpuT: 3.5MM IR blaster socket for hdmi source control on all 4 inputs
13. +5V DC: 5V dc power jack www.avenview.com
Page 5
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 4 1. GETTING STARTED
- 4 1.1 IMpORTANT SAfEGuARDS
- 4 1.2 SAfETy INSTRuCTIONS
- 5 1.3 REGulATORy NOTICES fEDERAl COMMuNICATIONS COMMISSION (fCC)
- 6 2. INTRODuCTION
- 7 2.1 pACkAGE CONTENTS
- 7 2.2 BEfORE INSTAllATION
- 8 2.3 pANEl DESCRIpTION
- 8 2.3.1 SW-HDM3D-C6-4X4E front panel
- 8 2.3.2 SW-HDM3D-C5-4x4E Rear panel
- 9 2.3.3 HDM3D-C6SW-R front & Back panels
- 9 2.3.4 Signal level (Max (0 – 7) Min)
- 10 2.4 IR CONTROl INSRTuCTIONS
- 11 3. INSTAllATION SWHDM3D-C6-4X4E
- 11 3.1 Matrix Switch
- 11 3.2 Receiver
- 11 4. fRONT pANEl OpERATION GuIDE
- 11 4.1 Method A: push Button
- 13 5. RS232 & ETHERNET SOfTWARE GuIDE
- 20 6. EDID lEARNING
- 21 7. SpECIfICATIONS
- 22 8. IR CONTROl GuIDE