PELLET STOVES USER MANUAL

ADDITIONAl THeRmOsTAT fOR DUCTING mOTOR CONTROl

For models with ducting motor there is also the possibility of thermostatting the motor itself. The connection of an external thermostat will allow to control the ducting motor independently from stove functioning.

At this point just set the desired temperature on the thermostat; the thermostat will control the functioning of the second motor:

Š with temperature to be reached (closed contact) the second

motor will follow the trend of the stove.

Š when the temperature has been reached (open contact), it takes the

ducting motor to 1st speed and will be

displayed by the flashing LEd relating to the ducting

motor.

The ducting thermostat clamp is fitted with a jumper as standard.

See the example drawing to the side.

ReARms

The figures below illustrate the positions of the tank (85°c) rearms. contact the qualified technician if one of the rearms should be triggered, so as to verify the cause.

SOUVENIR

85C°

ILENIA

85C°

ENGLISH 17