- Industrial & lab equipment
- Electrical equipment & supplies
- Power generators
- Powerhouse
- 2000Wi
- Owner's manual
2.2 Serial number and bar code identification and location. Powerhouse 2000Wi
Add to my manuals
40 Pages
advertisement
2.2 Serial number and bar code identification and location
The generator bar code number and the engine serial number identify your particular unit and are necessary when ordering parts and accessories. These two numbers are used by your dealer and The Coast
Distribution System, Inc. for warranty administration and must be supplied before any work can be done.
The engine serial number can be found stamped on the engine block above oil dipstick. It is visible when the maintenance panel is removed.
Serial Number
The bar code number label is found in two locations:
1.
On the bottom of the generator.
2.
On the packing carton.
Please record this information below and keep this manual in a safe place along with the bill of sale.
Engine Serial Number __________________________________
Bar Code Number _______________________________
Date of Purchase ________________________________
Name of Selling Dealership ________________________________
Please go to
www.powerhouse-products.com/register
and register your unit today. Online registration will be accepted as proof of purchase. Online registration will make sure you are protected in the event you have lost your receipt, and will significantly speed the process in the event warranty service is necessary.
For warranty assistance:
Phone: 877-544-4449
Fax: 800-263-0280
E-mail: [email protected]
9 2000Wi OM
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 5 1. SAFETY INSTRUCTIONS
- 7 2. COMPONENT IDENTIFICATION
- 8 2.1 Control panel 2000Wi
- 9 2.2 Serial number and bar code identification and location
- 10 3. PRE-OPERATION CHECK
- 10 3.1 Check the engine oil level
- 11 3.2 Check the fuel level
- 12 3.3 Check the air cleaner
- 13 4. OPERATING INSTRUCTIONS
- 13 4.1 Starting the engine
- 14 4.2 High altitude operation
- 15 4.3 Generator use
- 17 4.4 AC application
- 18 4.5 Output and Overload Lights
- 19 4.6 DC application
- 20 4.7 Low oil alarm system
- 21 4.8 Economy switch
- 21 4.9 Stopping the engine
- 22 5. MAINTENANCE
- 22 5.1 Emission control system
- 24 5.2 Maintenance Schedule
- 25 5.3 Changing oil
- 26 5.4 Air cleaner service
- 27 5.5 Spark plug maintenance
- 29 5.6 Spark arrestor maintenance
- 30 6. TRANSPORTING and STORAGE
- 30 6.1 Exercising the Generator
- 31 6.2 Before storing the unit for an extended period
- 32 7. TROUBLESHOOTING
- 32 7.1 Engine will not start
- 33 7.2 Appliance does not operate
- 33 7.3 No output at the DC receptacle
- 34 8. SPECIFICATIONS
- 35 9. WARRANTY AND CONSUMER INFORMATION
- 35 POWERHOUSE® GENERATOR WARRANTY
- 36 CALIFORNIA EMISSIONS CONTROL WARRANTY STATEMENT
- 37 EMISSION CONTROL SYSTEM WARRANTY
- 37 10. APENDIX B - EMISSION CONTROL SYSTEM
- 38 11. APENDIX C - SAFETY AND CHARGING INSTRUCTIONS