advertisement
User Manual
AT Command of data trigger off password:
AT+DOFFPSWD=xxx xxx :data trigger off password
The maximum transmission unit of TCP packet
AT Command:
AT+TCPMTU=xxx xxx : the MTU value
This item is valid only when the “Data Center Number” is greater than 1.
When one of the configured data center lost connection, RTU will try to reconnect after the configured reconnect interval
AT Command:
AT+MCONTIME=xxx xxx : reconnect time interval (unit is second)
When “SMS configure function” is enabled, RTU parameters are set by SMS. The format of SMS refer to
.
Command: AT+SMSCF=x
Explanation: whether SMS configure function is enabled.
Parameter: x range 0-1, 0 mean disable, 1 mean enable.
Example: AT+SMSCF=1
Waveloc Ltd. - 6 Vasiliou Tsitsani str. Glyfada, 16675 Attiki, Greece - http://waveloc.com
Property of Xiamen Four-Faith Communication Technology Co., Ltd. All rights reserved.
Page 61 of 96
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 30 ◆Digitalinputfunction
- 31 ◆MODBUSlogiccorrespondingfunction
- 31 ◆Acquisitionpurpose
- 31 ◆Acquisitioninterval
- 32 ◆Alarmtriggercondition
- 32 ◆Alarmcontent
- 32 ◆Alarmphonenumber
- 33 ◆Digitaloutputfunction
- 34 ◆MODBUSlogic1output
- 34 ◆MODBUSlogic0output
- 34 ◆MODBUSlogic1square-wavecycle
- 35 ◆MODBUSlogic0square-wavecycle
- 35 ◆Defaultoutputvoltage
- 36 ◆Analoginputfunction
- 36 ◆Setsensorrange
- 38 ◆Setsensorvoltageorcurrentoutput
- 39 ◆MODBUSfunction
- 39 ◆Acqisitionfunction
- 39 ◆Acqisitioninterval
- 39 ◆Alarmtriggercondition
- 40 ◆Alarmcontent
- 40 ◆Alarmphonenumber
- 41 ◆Activereportfunction
- 42 ◆Counterfunction
- 42 ◆Counterworkmode
- 42 ◆Counterinitialvalue
- 42 ◆Alarmfunction
- 43 ◆Alarmcontent
- 43 ◆Alarmphonenumber
- 43 ◆Alarmupperlimit
- 44 ◆Activereportinterval
- 44 ◆Alarmreportmethod
- 44 ◆Continuousalarminterval
- 45 ◆Continuousalarmnumberoftimes
- 45 ◆Alarmadministratornumber
- 46 ◆ModBusworkmode
- 47 ◆ModBusaddress
- 47 ◆RTUworkmode
- 48 ◆DataCenterNumber
- 49 ◆MainCenterAddr+Port:
- 49 ◆BackupCenterAddr+Port:
- 50 ◆MultiDSCConfiguration
- 51 ◆MainandBackupCenterDNSServer
- 51 ◆Center2~5DNSServer
- 52 ◆WorkMode
- 53 ◆TriggerType
- 53 ◆DisconnecttoTriggermode
- 53 ◆DebugLevel
- 54 ◆Databit,Parity,Stopbit
- 54 ◆CommunicationBaudrate
- 55 ◆AutoBackToMainServer
- 55 ◆DeviceID
- 55 ◆SIMCardNo
- 56 ◆BytesInterval
- 56 ◆CustomRegisterString
- 56 ◆CustomHeartbeatString
- 57 ◆Reconnectsetting
- 57 ◆Transfermeanning
- 58 ◆Network
- 59 ◆SMSCenter
- 59 ◆HeartbeatInterval
- 60 ◆CallTriggerPhoneNo
- 60 ◆SMSTriggerPassword
- 60 ◆DataTriggerPassword
- 61 ◆TCPMTU
- 61 ◆MultiCenterReconnectInterval
- 61 ◆SetparameterofconfigureSMS
- 62 ◆RTC(RealTimeClock)TimeSetting
- 63 ◆PowerOn/OffSetting
- 72 ◆Destinationnumber
- 73 ◆SMSSendingFormat
- 73 ◆DatauploadStyle
- 74 ◆ShowConfigure
- 74 ◆ShowBaudrate
- 74 ◆AutoDetect
- 74 ◆VersionDisplay
- 74 ◆SignalValue
- 75 ◆Factorysetting
- 75 ◆ClearOutput
- 75 ◆SaveOutput
- 75 ◆Browse
- 75 ◆SaveConfigure
- 75 ◆LoadConfigure