Motion Detection. Honeywell HISD-2201WE-IR

z

Time Format: Select different time display mode for the appointed channel z Date Format: Select different date display mode for the appointed channel z Bright: Adjust the brightness for the appointed channel z Contrast: Adjust the contrast for the appointed channel z Saturation: Adjust the saturation for the appointed channel z Hue: Adjust the hue for the appointed channel z Title Location: Set the channel title location for the appointed channel z Date Adjustment: Set the channel date location for the appointed channel z Cyclotron arrow: Restore the default parameters

After all parameters setting completed, click “Save” and the it comes into effect immediately.

Encoding

IP Camera “Encoding” setting interface as figure 3-14.

Honeywell

Figure 3-14

z Compress type: Main Stream(Normal)/ Sub Stream/ Main Stream(Event) selectable z Stream: Including complex stream/ video stream two types z Resolution: According to the front camera supported, how the camera resolution type supported, the corresponding resolution will selectable z Bitrate Type: Constant/ Variable selectable z Bitrate: Set different bitrate for different channels z Frame Rate: Select different frame rate in the drop-down list,, default is “Full Frame” z Quality: Select different image quality according to your need, default is “Highest” z Video Encode: H.264/ MJPEG two kinds of video encode format z I frame Interval: Set the I frame internal time

After all parameters setting completed, click “Save” and the it comes into effect immediately. ( “Setup” setting will change the front camera parameters directly)

Video Parameters

IP Camera “video Parameters” setting interface as figure 3-15.

13