- No category
advertisement
6.4. Option
6.4.1. [Common] tab
Sets up the application to be started when the [Start] or [Scan] button of the scanner is pressed.
[Path]
Specifies a file name of the application to be started with its absolute pathname.
A file can be also selected directly by using the […] button.
[Argument]
Specifies an argument to be passed when starting the specified application. (This item can be omitted.)
[Start in]
Specifies a default folder for starting the application.
A default folder can be also selected by using the […] button.
(This parameter can be omitted.)
[Run]
Specifies the display size of the application to be started.
81
[Use Plug-In]
Checking this check box specifies a plug-in.
(A plug-in is an additional program for adding a new function to the application.)
[Setting]
Sets a plug-in in accordance with the following procedure:
• Pressing the [Setting] button after selecting a target plug-in name in the plug-in list displayed displays the plug-in setting screen.
• Pressing the [OK] button after setting each item reflects the settings for the application to be started.
[Install]
A new plug-in can be installed.
Press the [Install] button and specify a file of the plug-in to be installed. A new plug-in is registered in the list.
* Up to 50 plug-ins can be registered.
82
<<Setting the Start button>> (* for fi-4990 / M4099D)
If the scanner being monitored has function keys
(F1,F2,...), it is necessary to assign a function key to the start button in advance.
If no function key has been assigned to the start button, a dialog box for determining whether to set the start button is displayed when the dialog box is displayed after selecting [Option] on the pop-up menu.
Selecting "Yes" displays a dialog box below.
(If "No" is selected, the function to start any application when the start button in this application is pressed is disabled.)
Pressing the [OK] button after selecting one of function keys from F1 to F3 enables assigning a function key to the start button. If the [Cancel] button is pressed, the function key is not assigned to the start button.
(If the [Cancel] button is pressed, the function to start any application when the start button in this application is pressed is disabled.)
83
advertisement
Related manuals
advertisement
Table of contents
- 8 1. Outline
- 8 1.1. Characteristics of this Driver
- 8 1.2. Operating Environment
- 9 1.3. Explanatory Notes
- 10 1.4. Explanation of terms
- 11 2. TWAIN
- 11 2.1. TWAIN
- 12 2.2. TWAIN Application
- 13 3. Installation
- 13 3.1. Preparation
- 14 3.2. Starting Installation
- 20 3.3. Uninstall
- 21 4. Using the Driver
- 21 4.1. Selecting the Driver
- 21 4.2. Screen Configuration
- 22 4.2.1. Linkage to Image Processing Software Option
- 23 4.3. Displaying Driver Information
- 24 4.4. Setting Information on Image Scanning
- 32 4.5. Specifying Driver Operation
- 34 4.6. Setting "Scanning Area
- 35 4.7. Setting Options
- 36 4.7.1. Rotation
- 40 4.7.2. Job/Cache
- 45 4.7.3. Generic
- 46 4.7.4. Imprinter (Endorser)
- 50 4.7.5. Start Up
- 54 4.7.6. Filter
- 58 4.7.7. Compression
- 59 4.8. Setting Advance Options
- 60 4.8.1. Gray
- 63 4.8.2. Image Filter
- 68 4.8.4. When Color (/Grayscale) is specified
- 73 4.9. Setting the Setting Manager Options
- 76 4.10. Basic Scan Dialog
- 78 4.11. Download Pattern File
- 82 5. Using the Gamma Pattern Editor
- 82 5.1. Start-up
- 83 5.2. [File] menu
- 83 5.3. [Help] menu
- 84 5.4. Gamma Pattern Editing
- 85 6. How to Use the FUJITSU Scanner Control Center
- 85 6.1. Outline
- 85 6.2. How to Start the FUJITSU Scanner Control Center
- 86 6.3. Pop-up Menu
- 88 6.4. Option
- 88 6.4.1. [Common] tab
- 91 6.4.2. [Diagnosis] tab
- 92 6.4.3. [Device info] tab
- 93 6.4.4. [Device Setting] tab
- 98 7. Using the Firmware Updater
- 100 8. Troubleshooting
- 100 8.1. Error Messages
- 100 8.1.1. Messages from the TWAIN Driver
- 109 8.1.2. Error messages relating to gamma correction pattern editing
- 110 8.1.3. Messages concerning to FUJITSU Scanner Control Center
- 112 8.1.4. Messages relating to the Firmware Updater
- 114 8.2. Device Trouble Related to Operation
- 115 9. Appendix
- 115 9.1. Relevant Image Scanner Specification
- 169 9.2. Maintenance Service