RaceVision2 User Manual

B&G RaceVision2 User Manual

Introduction

Exterior features

RIGHT SIDE VIEW

On/Off Switch

ON/OFF SWITCH

Turn the computer on by quickly depressing the yellow on/off button on the upper right-hand side of the computer (approximately ½ to 1 second).

After the computer boots up, pressing the on/off switch will toggle the backlighting on/off.

When the RaceVision2 is operating, the side switch will function according to the selection in the XRT

Utility.

Holding the on/off button down for a longer period of time (4-5 seconds) causes an emergency forced shut down of the computer.

Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project