- No category
advertisement
4.0.2 Rear Panel
Matrix Switching System—User Manual
Figure 4-2 HX-44 Rear Panel
The HX-44 supports up to 4 input/output jacks on the rear panel, each 4 th
row HDMI female terminals form the signal input/output jacks.
RS-232: Use the RS-232 connection cable to connect the computer serial port (COM1 or COM2) to the RS232 communication port of the HDMI matrix host. The computer can then be used to control the HDMI matrix after installation of application software.
The RS-232 port is a 9-pin female connector.
DC 12V: The Power is applicable for DC12V
IR2: Connect to the IR Extended Receiver
.
INPUT 1~4: HDMI input Channels for source devices
OUTPUT 1~4: HDMI output Channels HDTV ‟s or Monitors.
HDMI Type A Connector pin definition:
Pin #
1
Signal Pin #
2 TMDS Data2 Shield 12
3 TMDS Data2- 13
Signal
TMDS Data2+ 11 TMDS Clock Shield
TMDS Clock-
NC
4
5
6
10
TMDS Data1+
TMDS Data1 Shield
TMDS Data1- 16
7 TMDS Data0+ 17
8 TMDS Data0 Shield 18
9 TMDS Data0- 19
TMDS Clock+
14
15
NC
DDC-SCL
DDC-SDA
DDC-Ground
+5V Power
Hot Plug Detect
8
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 5 1.0 Matrix System Overview
- 5 1.0.1 Introduction
- 6 1.0.2 Packing
- 6 2.0 Host Installation
- 7 3.0 Specifications
- 7 4.0 Front/Rear Panels
- 7 4.0.1 Rear Panel
- 9 4.0.2 Rear Panel
- 10 5.0 HDMI Matrix and Peripherals Connection
- 10 5.0.1 Input/Output Connections
- 11 5.0.2 HDMI Matrix and Control Computer Connection
- 13 5.0.3 IR2 Connection
- 13 5.0.4 Power connection
- 14 6.0 Matrix Application Software
- 14 6.0.1 Software Introduction
- 14 6.0.1.1 Software Description
- 14 6.0.1.2 Software Activation
- 15 6.0.2 Software Features
- 16 6.0.2.1 Main Operation Interface Functions
- 18 6.0.2.2 Disconnect Function Keys
- 19 6.0.2.3 Select all output, DeSelect all output Switching Functions
- 20 6.0.2.4 Disconnect all Command
- 20 6.0.2.5 Memory Function
- 21 6.0.2.6 Options Function
- 21 6.0.2.7 Other Application
- 22 7.0 Operation Examples
- 24 8.0 Communication Protocol/Control Command Code
- 24 9.0 Troubleshooting
- 26 Appendix A RS-232 Communication Protocol
- 26 A-1 Host Request
- 26 A-1.1 Device Byte
- 27 A-1.2 Request Byte
- 29 A-1.3 Index Byte
- 30 A-1.4 Value Byte
- 31 A-1.5 CRC Byte
- 32 A-2 Device ACK Packet
- 32 A-2.1 ACK Type A
- 33 A-2.2 ACK Type B