User Manual

Matrix Switching System—User Manual

7.0 Operation Examples

Example 1: Switch the NO.1 input signal to the NO.2 output channel.

Key LCD Display Operation

1. Press the NO.2 key of the output channel for 2 seconds, then the input channels will begin to flicker.

2. Press the NO.1 key of the

Input channel for 2 seconds.

Example 2: Switch the NO.1 and NO.2 input signals to each NO.1 and NO.2 output channels.

Key LCD Display Operation

1. Press the NO.1 key of the output channel for 2 seconds, then the input channels will begin to flicker.

2. Press the NO.1 key of the

Input channel for 2 seconds.

3. Press the NO.2 key of the output channel for 2 seconds, then the input channels will begin to flicker.

4. Press the NO.2 key of the

Input channel for 2 seconds.

Example 3: Delete

“All” settings.

Key LCD Display Operation

3. Press the ALL key on the front panel, and then press the

OFF key to cancel all the settings.

21

Matrix Switching System—User Manual

Example 4:

“STO” and “RCL” functions.

Key LCD Display Operation

1. Press the NO.2 key of the output channel for 2 seconds, then the input channels will begin to flicker.

2. Press the NO.1 key of the

Input channel for 2 seconds.

3. Press the STO key on the front panel, then the OUT channels will begin to flicker.

4. Press the NO.1 key of the output channel to save the setting in the NO.1 channel.

5. Press the ALL key on the front panel, and then press the

OFF key to cancel the setting.

6. Press the RCL key on the front panel, then the OUT channels will begin to flicker.

7. Press the NO.1 key of the output channel to Load the previously saved.

22