Standards. Robot Coupe CL 50 (J491), CL 50 Ultra - 24470, CL 50 Ultra Pizza-GRADED-7718, CL 50 Ultra Pizza, CL 50 Ultra, CL 50 Ultra E, CL 50 E, CL 50 Ultra (DA307)

The CL 50/CL 50 Ultra is fitted with a temperature fuse which automatically stops the motor if the machine is left on for too long or overloaded.

If this happens, allow the machine to cool completely before restarting.

R E M E M B E R

Never try to override the locking and safety systems.

Never insert an object into the container where the food is being processed.

Never push the ingredients down with your hand.

Do not overload the appliance.

STANDARDS

MACHINES IN COMPLIANCE WITH:

• The following European directives and related national legislation:

- Modified "machinery" directive 98/37/EEC,

- "Low voltage" directive 73/23/EEC,

- "EMC" directive 89/336/EEC,

- "Materials and parts in food contact" directive

89/109/EEC,

- Commission Directive 2002/72/EC of 6 August

2002 relating to plastic materials and articles intended to come into contact with foodstuffs.

• The following European harmonized standards and standards setting out health and safety rules:

- EN 292 - 1 and - 2,

18

- EN 60204 -1 (1998),

- For Vegetable cutting machine : EN 1678.

109

MADE IN FRANCE BY ROBOT-COUPE

S

.

N

.

C

.

Export Department

Tel. : + 33 1 43 98 88 33 - Fax : + 33 1 43 74 36 26

48, rue des Vignerons - BP 157

94305 Vincennes Cedex - France http://www.robot-coupe.com - email : [email protected]

We reserve the right to alter at any time without notice the technical specifications of this appliance.

None of the information contained in this document is of a contractual nature. Modifications may be made at any time.

© All rights reserved for all countries by: ROBOT-COUPE s.n.c.