ACS ACR1252U NFC Reader Technical Specifications
Pubblicità
Pubblicità
ACR1252U
NFC Forum Certified
Reader
Technical Specifications V1.01
Subject to change without prior notice
[email protected] www.acs.com.hk
Table of Contents
ACR1252U – Technical Specifications
Version 1.01
Page 2 of 7 [email protected]
www.acs.com.hk
1.0. Introduction
The ACR1252U is a PC-linked NFC Reader that is NFC Forum certified.
The ACR1252U runs on the 13.56 MHz contactless technology and supports ISO 14443
Type A and B cards, MIFARE®, FeliCa and ISO 18092 compliant NFC tags and other
NFC devices. It has an ISO 7816 Compliant Class A SAM (Secure Access Module) slot which can be used together with a SAM card for key diversification and mutual authentication, providing high level of security in contactless transactions. Postdeployment firmware upgrade is also supported, eliminating the need for additional hardware modification.
ACR1252U is capable of the three modes of NFC, namely, Card Reader/Writer, Card Emulation and
Peer-to-Peer Communication. These NFC features make the ACR1252U ideal for NFC applications like Smart Posters for advertising and marketing purposes with most NFC-enabled mobile phones and
SIM cards in the market.
ACR1252U – Technical Specifications
Version 1.01
Page 3 of 7 [email protected]
www.acs.com.hk
2.0. Features
• USB 2.0 Full Speed Interface
• CCID Compliant
• Smart Card Reader: o Contactless Interface
Read/Write speed of up to 424 Kbps
Built-in antenna for contactless tag access, with card reading distance of up to 50 mm
(depending on tag type)
Supports ISO 14443 Part 4 Type A and B cards, MIFARE® Classic, FeliCa, and all four types of NFC (ISO/IEC 18092 tags)
Built-in anti-collision feature (only one tag is accessed at any time)
NFC Support:
▫ Card reader/writer mode
▫ Peer-to-Peer mode
▫ Card Emulation mode o SAM Interface:
One SAM slot
Supports ISO 7816-compliant Class A SAM cards
• Application Programming Interface: o Supports PC/SC o Supports CT-API (through wrapper on top of PC/SC)
• Built-in Peripherals: o User-controllable bi-color LED o User-controllable buzzer
• USB Firmware Upgradeability
• Supports Android™ 3.1 and above
• Compliant with the following standards: o ISO 18092 o ISO 14443 o ISO 7816 Class A (for SAM slot) o NFC Forum o J-LIS o CE o FCC o VCCI o MIC o KC o PC/SC o CCID o RoHS 2 o REACH o Felica Performance Certification o Microsoft® WHQL
ACR1252U – Technical Specifications
Version 1.01
Page 4 of 7 [email protected]
www.acs.com.hk
3.0. Typical Applications
• e-Government
• e-Banking and e-Payment
• e-Healthcare
• Transportation
• Network Security
• Access Control
• Loyalty Program
• Smart Poster/URL Marketing
• P2P Communication
ACR1252U – Technical Specifications
Version 1.01
Page 5 of 7 [email protected]
www.acs.com.hk
4.0. Technical Specifications
Physical Specifications
Dimensions .................................... 98.0 mm (L) × 65.0 mm (W) × 12.8 mm (H)
Weight ............................................ 81 g
Material .......................................... Acrylonitrile - Butadiene – Styrene (ABS)
Color .............................................. Matte Black
Antenna Size .................................. 50 mm × 40 mm
Cable Length .................................. 1 m (USB)
Universal Serial Bus Interface
Power Source................................. From USB
Speed ............................................. 12 Mbps (Full Speed)
Supply Voltage ............................... Regulated 5 V DC
Supply Current .............................. Max. 200 mA
Contactless Smart Card Interface
Standard ........................................ ISO/IEC 18092 NFC, ISO 14443 Type A & B, MIFARE, FeliCa
Protocol .......................................... ISO 14443 T=CL for ISO 14443-4 compliant cards and T=CL Emulation for
MIFARE Classic 1K/4K, ISO 18092, FeliCa and NFC tags
Operating Frequency ..................... 13.56 MHz
Operating Distance ........................ Up to 50 mm (depending on tag type)
Smart Card Read/Write Speed....... 106 Kbps, 212 Kbps, 424 Kbps
SAM Card Interface
Number of Slots ............................. 1 Standard SIM-sized
Standard ........................................ ISO 7816 Class A
Protocol .......................................... T=0 and T=1
Built-in Peripherals
LED ................................................ 1 Bi-color : Red and Green
Buzzer ............................................ Monotone
Application Programming Interface
PC-linked mode.............................. PC/SC
....................................................... CT-API (through wrapper on top of PC/SC)
Operating Conditions
Temperature................................... 0
°C – 50 °C
Humidity ......................................... Max. 90% (non-condensing)
MTBF ............................................. 500,000 hrs
Certifications/Compliance
ISO 18092, ISO 14443, ISO 7816 Class A (SAM slot), CE, FCC, PC/SC, CCID, RoHS 2, REACH,
NFC Forum ,Felica Performance Certification, USB Full Speed, Microsoft® WHQL
J-LIS (Japan), VCCI (Japan), MIC (Japan), KC (Korea)
ACR1252U – Technical Specifications
Version 1.01
Page 6 of 7 [email protected]
www.acs.com.hk
Device Driver Operating System Support
Windows® 2000, Windows® XP, Windows Vista®, Windows® 7, Windows® 8, Windows® 8.1, Windows® 10
Windows® Server 2003, Windows® Server 2003 R2, Windows® Server 2008, Windows® Server 2008 R2,
Windows® Server 2012, Windows® Server 2012 R2
Linux®, Mac OS®, Android™ 3.1 and above
Android is a trademark of Google Inc.
Linux® is the registered trademark of Linus Torvalds in the U.S. and other countries.
Mac OS is a trademark of Apple Inc.
Microsoft, Windows and Windows Vista are registered trademarks of Microsoft Corporation in the United States and/or other countries.
MIFARE, MIFARE Classic and MIFARE Ultralight are registered trademarks of NXP B.V. and are used under license.
The Certification Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in other countries.
Page 7 of 7
ACR1252U – Technical Specifications
Version 1.01 [email protected]
www.acs.com.hk
Scarica
Pubblicità