advertisement
REFRIGERATORS
Utilizing Environmentally Safe, CFC-free R-134a Refrigerant
DL1RS-SS-F
DL2RS-SS-F
FISH FILE
REFRIGERATORS
Standard Features
• Modern, State-of-the-Art Styling
• Specially Designed For Fresh Fish Storage on Crushed Ice
• Performance Rated Refrigeration System
Utilizing Environmentally Safe R-134a
Refrigerant
• 3" Non-CFC Polyurethane Foam Insulation
• Plasticized Fin Coil
• External Dial Thermometer
• Anti-Sweat Drawer Heaters
• Chrome-Plated Hardware
• Heavy-Duty Diecast Flowline Handle
• Automatic Electric Condensate Evaporator
• One Piece Snap-In Magnetic Gaskets
• Easy Glide Drawers
• Heavy Duty Drawer Track
• Adjustable 6" Stainless Steel Legs
• Stainless Steel Exterior and Interior
OPTIONAL FEATURES & ACCESSORIES
•Heavy Duty Casters
•Remote Models
•Consult Factory
Refrigeration System
A “Performance Rated”, air-cooled, hermetically sealed, capillary type refrigeration system is installed on the top of each model. Plasticized finned coil and air circulating fans are contained within an easily accessible low profile interior ceiling mounted housing. Our refrigeration system, fully charged with R-134a refrigerant, is designed to maintain 38 ° -40 Ä Fahrenheit while operating with an unrestricted air supply in an ambient temperature of 100 ° Fahrenheit. All evaporator condensate water is directed to the bottom where there is an automatic electric condensate vaporizer. A strict quality assurance team inspects all materials and components to certify that each model conforms to the most exacting standards. All models are performance tested for a minimum of 16 hours prior to crating.
Cabinet Construction
All materials are of top quality, assembled to conform with strict quality-assurance requirements. The cabinet front and doors are constructed of heavy-gauge polished stainless steel for durability. All cabinet joints and seams are sealed vapor-tight. Case is of all metal, welded construction and internally supported and braced for a rigid unit construction. Cabinet design eliminates overlapping panels with raw edges.
Cabinet body and doors are insulated with non-CFC, foamed-in-place polyurethane foam with an average thickness of 3 inches to ensure increased energy efficiency. Full-length louvered air grille located above the doors allows equal air circulation to the condensing unit. Easily removable, low-wattage, anti-sweat drawer heaters concealed by a non-metallic, non-conductive, high-impact thermal breaker strip eliminate condensate build-up on the cabinet front. Cabinets are equipped with 6-inch adjustable stainless steel legs.
Drawer Construction
Drawer fronts and backs are constructed of heavy gauge, polished stainless steel with heavy duty, safety grip, chrome plated handles. All drawer fronts are insulated with non-CFC polyurethane foam insulation. Full extension, lift-out type drawer frames are of heavy gauge, welded stainless steel mounted on heavy duty, easy glide, self closing drawer slides. Each drawer is supplied with a sturdy, removable pan 16" wide x 18 3 /
8 long x 6" deep. Self adjusting, full perimeter, magnetic snapin gaskets guarantee a positive seal. Condensation from pans and water from ice is drained by drawer gutters to the floor of the cabinet where a 1" male pipe connection can be made to a floor drain.
REFRIGERATORS
DL1RS-SS-F
One Section
DIMENSIONAL DATA
Net Capacity (cu.ft.) 16
Net Capacity of Drawers Overall (cu.ft.) 4.1
Width, Overall (in.)
Depth, Overall (Incl. Hdls.) (in.)
Depth (Less Drawers(s)) (in.)
Depth (Drawers Open) (in.)
Clear Drawer Width (in.)
Clear Drawer Height (in.)
Height, Overall (Incl. 6" Legs) (in.)
Number of Drawers
Drawer Pan (WxLxD)
26
29 3 /
8
25 7 /
8
49 1 /
2
19 3 /
8
11
83 1 /
4
4
16 x 18 3 /
8 x 6
REFRIGERATION DATA
Condensing Unit Size (H.P.)
Capacity (BTU/Hr)*
ELECTRICAL DATA
Cabinet Specifications
Feed Wires (Incl. Ground)
Condensing Unit Specs.
Total Amperes
Cabinet Amperes
Defrost Amperes
Power Supply Cord
SHIPPING DATA
Height – crated (in.)
Width – crated (in.)
Depth – crated (in.)
Volume – crated (cu. ft.)
Weight Std – crated (lbs.)
Weight SS – crated (lbs.)
Weight Std – uncrated (lbs.)
Weight SS – uncrated (lbs.)
1 /
4
1940
85 1 /
2
31 5 /
8
42
65
320
380
220
280
115/60/1
3
115/60/1
6.9
1.6
yes
DL2RS-SS-F
Two Section
32
8.2
52
29 3 /
8
25 7 /
8
49 1 /
2
19 3 /
8
11
83 1 /
4
8
16 x18 3 /
8 x6
1 /
3
2560
115/60/1
3
115/60/1
9.1
1.9
yes
85 1 /
2
64
42
133
535
615
365
445
*Rating @ +25°F Evaporator, 90° Ambient
Note: If the cabinet is located directly against wall and/or under low ceiling, a minimum clearance of 2" is required.
Note: All specifications subject to change without notice.
A Division of BALMAC International, Inc.
61 Broadway, Suite 1900, New York, NY 10006-2701
(212) 898-9699 Fax: (212) 514-9234 www.bmil.com - [email protected]
SIDE VIEW
DL1RS-SS-F
FRONT VIEW
DL2RS-SS-F
FRONT VIEW
DLRSF403
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project