Continental Refrigerator DL2RS Spec Sheet

DESIGN E R L I N E R E F R IG E R A T O R
Project Name:
Model: DL2RS
Model Specified:
2-Section Reach-In Refrigerator
Shallow Depth
DL2RS - Stainless steel front, aluminum end panels and interior
DL2RS-SA - Stainless steel exterior, aluminum interior
DL2RS-SS - Stainless steel exterior and interior
Location:
Item No:
Quantity:
AIA #:
SIS #:
Standard Model Features
REFRIGERATION SYSTEM
Environmentally-safe R-134a refrigerant
Self contained, performance-rated “plug”
refrigeration system
Refrigeration system is readily accessible on top of
cabinet, separate from the “food zone” to increase
storage capacity
Automatic, hot gas condensate evaporator
CABINET ARCHITECTURE
3” non-CFC polyurethane foam insulation
Chrome-plated flow line handles
Cam action, lift off hinges
Self-closing doors
Magnetic snap-in door gaskets
Cylinder lock in door
Heavy-duty, epoxy-coated steel shelves
Options and Accessories
(upcharge and lead times may apply)
Stainless steel case back
Pass-Thru
Additional epoxy-coated steel shelves
Standard depth
Chrome or stainless steel shelves
Hinged glass doors
Rehinging of doors (consult factory)
Increased refrigeration systems
Expansion valve system
Special electrical req. (consult factory)
Wine display
Correctional Facility Options
Casters
•
One way security screws
Dial thermometer
•
Locking hasp (lock not included)
Remote models
•
Stainless steel mesh cover
Custom laminates
•
Coverless hinges
Adjustable 6” stainless steel legs
MODEL FEATURES
Automatic interior lighting
External digital thermometer
Energy saving switch for door heaters
Unique air duct system for optimum air flow
Cabinet upper side panels and refrigeration “plug” system
can be easily removed and reinstalled at job site
Half doors
Consult factory for other model configurations, options and accessories.
Toll-Free: 800-523-7138
Phone: 215-244-1400
Fax: 215-244-9579
539 Dunksferry Road
Bensalem, PA 19020
www.continentalrefrigerator.com
APPROVAL:
Model Specifications
Model Plan Views
DIMENSIONAL DATA
Net Capacity (cu. ft.)
32 (906 cu l)
Width, Overall (in.)
52 (1321 mm)
Depth, Overall (incl. handles) (in.)
29 1/4 (743 mm)
Depth [less doors] (in.)
25 7/8 (657 mm)
Depth [doors open 90°] (in.)
49 1/2 (1257 mm)
Clear Door Width (in.)
19 3/8 (492 mm)
Clear Door Height (in.)
58 5/8 (1489 mm)
Height, Overall (incl. 6” legs) (in.)
83 1/4 (2115 mm)
No. of Doors
2
No. of Shelves
6
Shelf Area (sq. ft.)
40.8 (3.8 sq m)
REFRIGERANT DATA
Condensing Unit Size (H.P.)
1/3
Capacity (BTU/Hr)*
2560
77 1/4”
(1962 mm)
19 3/8”
(492 mm)
DOOR OPENING
58 5/8”
(1489 mm)
DOOR OPENING
83 1/4”
(2115 mm)
6”
(152 mm)
52”
(1321 mm)
FRONT VIEW
29 1/4”
(743 mm)
25 7/8”
(657 mm)
ELECTRICAL DATA
Voltage (int’l)
115/60/1 (220/50/1)
Feed Wires (incl. ground)
3
Total Amps (int’l)
6.5 (4.9)
10 ft. Cord/Plug [attached] (int’l)
Yes (No)
SHIPPING DATA
Height - Crated (in.)
85 1/2 (2172 mm)
Width - Crated (in.)
64 (1626 mm)
Depth - Crated (in.)
42 (1067 mm)
Volume - Crated (cu. ft.)
133 (3766 cu l)
Weight Std - Crated (lbs.)
535 (243 kg)
Weight SS - Crated (lbs.)
615 (279 kg)
Weight Std - Uncrated (lbs.)
365 (166 kg)
Weight SS - Uncrated (lbs.)
445 (202 kg)
* Rating @ +25°F evaporator, 90°F ambient
Figures in parentheses reflect metric equivalents rounded to the nearest
whole unit.
Equipped with one NEMA-5-15P Plug
(varies by country)
05/27/10
Toll-Free: 800-523-7138
Phone: 215-244-1400
Fax: 215-244-9579
539 Dunksferry Road
Bensalem, PA 19020
www.continentalrefrigerator.com
Due to our continued efforts in developing innovative
products, specifications subject to change without notice.
22 7/8”
(581 mm)
58 1/8”
(1476 mm)
SIDE VIEW
IMPORTANT NOTE: If the cabinet is located directly against a wall and/or under a low ceiling, a minimum
clearance of 12” is required.
REFRIGERATION SYSTEM
A “performance rated”, air-cooled, hermetically
sealed, capillary-type refrigeration system is installed on the top of each refrigerator. Plasticized
fin coil and air circulation fans are contained within
a concealed “plug”-type insulated housing, readily accessible on top of the cabinet and separate
from the food zone to increase food storage capacity. The entire “plug” system is fully charged
with environmentally safe R-134a refrigerant and
mounted on a sturdy steel, rail-type base which can
be easily removed if freezer conversion is desired.
Refrigerators are designed to maintain 38°F-40°F
(3°-5° Centigrade) while operating with an unrestricted air supply in a maximum ambient temperature of 100°F. All condensate water is evaporated
by an automatic, non-electric, corrosion-resistant
condensate evaporator. A strict quality-assurance
team inspects all materials and components to certify that each model conforms to the most exacting
standards. All models are factory performancetested for a minimum of 16 hours prior to crating.
INSULATION
All cabinet walls, top and bottom have high density,
foamed-in-place, non-CFC polyurethane insulation.
®
MADE IN THE U.S.A.
© Copyright 2013. Continental Refrigerator.
A Division of National Refrigeration & Air Conditioning Products, Inc.
SHELVING
Shelves are designed for heavy-duty use with .306”
diameter frame and brace members and .140” diameter fill wires spaced 3/4” apart. Shelves are
welded steel and epoxy-coated for a durable, long,
rust-free service life. Adjustments are in 1 inch increments and a wide door opening allows the use
of a variety of optional pan and tray slide types.
CABINET CONSTRUCTION
All materials are of top quality, assembled to conform with strict quality-assurance requirements.
The cabinet front is constructed of heavy-gauge
polished stainless steel for durability. All cabinet
joints and seams are sealed vapor-tight. Case is of
all metal, welded construction and internally supported and braced for a rigid unit construction.
Cabinet design eliminated overlapping panels with
raw edges. Cabinet body is insulated with non-CFC,
foamed-in-place polyurethane foam with an average thickness of 3 inches to ensure increased energy efficiency. Full-length louvered air grille located
above the doors allows equal air circulation to the
condensing unit. Easily removable, low-wattage,
anti-sweat door heaters concealed by a non-metallic, non-conductive, high-impact thermal breaker
strip eliminate condensate build-up on the cabinet
front. Automatic interior lighting is activated by
an easily accessible interior switch. Cabinets are
equipped with 6 inch adjustable stainless steel legs.
DOOR CONSTRUCTION
Solid hinged door shells are constructed of heavygauge stainless steel and are internally braced and
urethane-foam-insulated for rigidity. Door corners
are welded construction and polished. Replaceable
snap-in door gaskets are self-adjusting, heavyduty, magnetic type. Door handles and hinges are
chrome-plated and non-corrosive. Doors are provided with built-in cylinder locks which are keyed
alike. Hinges are cam action, lift-off type featuring
positive safety stop at 120 degrees.
DL2RS (8/27/13)