Samlexpower SDC-8 Specification
Advertisement
Advertisement
P O W E R C O N V E R S I O N P R O D U C T S
SDC Series DC-DC Converters
FEATURES
• Advanced switchmode design
• Mount in almost any location
• Compact and light weight
• Reverse polarity protection
• High efficiency
• Cycle by cycle current limiting circuit
• Overvoltage protection
• Short Circuit Protected
• 2 Year Warranty
APPLICATIONS
• Earth moving equi pment
• Trucks
• Buses
8 Amps
TECHNICAL SPECIFICATIONS
Model
Input to Output isolation
Input Voltage
Output Voltage
Output voltage regulation
Input Current at No Load
Output Current
SDC-08
CAUTION! THERE IS NO ISOLATION BETWEEN THE INPUT AND THE OUTPUT
INPUT AND OUTPUT HAVE A COMMON NEGATIVE
Not isolated. Input and output connections have a common negative
20 to 35 VDC
13.6 VDC ± 0.1V
3%
<5 mA
Continuous
Current Limit *
Output Ripple and Noise
Efficiency
Operating Ambient Temperature
Humidity
Protections:
Overload
Over Heating
Reverse Polarity
Over Voltage
Input Side Fuse
Approval
Input / Output Connections
Dimensions (L x W x H)
Weight
8 A
8.5 A less than 50 mV RMS
~ 92%
- 20º to + 30° C (derate linearly to zero at 70° C)
Max. 95%. non condensing
By current Limiting
Drop in Output Voltage
Fuse Protection
Varistor (also protects against load dump)
8 A (inside the unit)
CE & Automotive
Terminal Block - 6.3 mm male flat tab. quick connect
98 x88 x 49 mm
0,25 Kgs
Technical Specifications subject to change without notification.
To view a full selection of Samlex products visit our website at: www.samlex.com or www.samlex-solar.com
Download
Advertisement