SDC Series DC-DC Converters
FEATURES
• Advanced switch-mode design
• Mount in almost any location
• Compact and light weight
• Reverse polarity protection
• High efficiency
• Cycle by cycle current limiting circuit
• Overvoltage protection
• Short Circuit Protected
• 2 year warranty
APPLICATIONS
• Earth moving equipment
• Heavy trucks
• Buses
30 AMPS
TECHNICAL SPECIFICATIONS
I
Model nput to Output Isolation
Input Voltage
Output Voltage
Output Voltage Regulation
Input Current at No Load
Output Current Continuous
Current Limit*
Output Ripple and Noise
Efficiency
Operating Ambient Temperature
Humidity
Protections:
Overload
Cooling
Over Heating
Reverse Polarity
Over Voltage
Input Side Fuse
Approval
Input / Output Connections
Dimensions (LxWxH)
Weight
SDC-30
CAUTION! THERE IS NO ISOLATION BETWEEN THE INPUT AND THE OUTPUT
INPUT AND OUTPUT HAVE A COMMON NEGATIVE
Not isolated. Input and output connections have a common negative
20 to 35 VDC
13,8 VDC±0,1V
3%
< 25MA
30 A
35 A less than 50 mV RMS
~ 92%
-20° to 30°C (derate linearly to zero at 70°C)
Max. 95% non condensing
By current Limiting
Temperature controlled fan
Drop in Output Voltage
Fuse Protection
Varistor (also protects against load dump)
30 A (inside the unit)
CE & Automotive
Terminal Block-6.3 mm male flat tab. quick connect
151x88x49 mm
0,6 Kgs
* Note: In current limit condition, the output voltage will drop if the current drawn increases beyond the current limit value of 35A
Technical Specifications subject to change without notification
To view a full selection of Samlex products visit our website at: www.samlex.com or www.samlex-solar.com
