CMA Dishmachines CMA-180TS Part Manual
Add to my manuals
20 Pages
CMA Dishmachines CMA-180 is a commercial-grade dishwashing machine designed for high-volume dishwashing needs. With its advanced features, it offers efficient and reliable cleaning performance, making it an ideal choice for restaurants, hotels, and other food service establishments. The CMA-180 boasts a sturdy construction with a stainless steel exterior, ensuring durability and longevity. It features a spacious interior that can accommodate various dishware sizes and shapes, including pots, pans, plates, and glasses.
advertisement
▼
Scroll to page 2
of 20
MODEL CMA-180 PARTS MANUAL Rev 2.04 CMA DISHMACHINES 12700 KNOTT AVENUE GARDEN GROVE, CALIFORNIA 92841 800-854-6417 FAX 714-895-2141 www.cmadishmachines.com TABLE OF CONTENTS MODEL CMA-180 1. PARTS MANUAL ..........................................................................................3 1.1. EXPLODED VIEW DRAWINGS........................................................................................................... 3 1.1.1 Straight Frame System Assembly............................................................................................ 3 1.1.2 Corner Frame Assembly .......................................................................................................... 4 1.1.3 Drain System Assembly............................................................................................................ 5 1.1.4 Plumbing System Assembly..................................................................................................... 6 1.1.5 Wash Spray System................................................................................................................. 7 1.1.6 Final Rinse System.................................................................................................................. 8 1.1.7 Door Handle Assembly ........................................................................................................... 9 1.1.8 Corner Door Handle Assembly ............................................................................................ 10 1.1.9 Pump System Assembly......................................................................................................... 11 1.1.10 Wash Tank Heater ................................................................................................................ 12 1.1.11 Booster Heater...................................................................................................................... 13 1.1.12 Wiring Harnesses ................................................................................................................. 14 1.1.13 Control Box Assembly .......................................................................................................... 15 1.1.14 Unique Parts For CMA-180TS ............................................................................................. 16 1.1.15 Unique Parts For CMA-180TC ............................................................................................ 17 2. POWER SWITCH BULB REPLACEMENT INSTRUCTIONS......................18 3. 180 CONVERSION KIT – CORNER TO STRAIGHT #00617.18.................19 4. 180 CONVERSION KIT – STRAIGHT TO CORNER #00617.17.................20 1. Parts Manual 1.1. 1.1.1 Exploded View Drawings Straight Frame System Assembly ITEM NO. 1 NO. REQ’D 1 17532.00 Stand 2 1 00535.30 3 3 17506.00 P/N ITEM NO. 17 NO. REQ’D 52 00924.00 Front door Handle 18 26 00912.00 ¼”-20 Nylon Lock Nut Door 19 4 01310.00 Bullet Feet DESCRIPTION P/N DESCRIPTION ¼” SS Washer 4 6 00636.17 E Z Door Glide 20 1 17522.50 Wash Tank Heater Cover 5 6 17554.00 Door Guide 21 1 17522.00 Booster Heater Cover 6 2 17552.00 Door Stop 22 1 01505.16 Tray Track Rail 7 1 13915.00 Door Latch Bracket 23 2 00941.00 8/32” x 5/8” Pan Head Screw 7A 1 13915.06 Door Latch Bracket 24 2 03801.00 10/32” Lock Nut 8 1 13701.00 Open Door Latch 25 1 17530.00 Wrapper 9 1 01505.10 Tray Track 26 1 17531.00 Pan 10 2 17510.00 Strainer Basket 11 1 01577.10 Scrap Tray Body 27 2 17506.60 Door Panel Splash Guard 27A 1 17506.65 Door Service Splash Guard 12 1 01577.20 13 1 17579.00 Scrap Trap Drawer 28 1 17506.21 Front Door Safety Bracket Scrap Trap Holder 29 1 17506.32 Right Door Safety Bracket 14 1 15 1 17511.00 Overflow 30 1 00960.00 8-32x1-1/2”pPanhead Screw 17402.00 Overflow Gasket 31 1 00927.00 16 25 8-32 Nylon Lock Nut 00906.00 ¼”-20 x 1/2” Hex Bolt Model CMA-180 Parts Manual Rev. 2.04 3 1.1.2 Corner Frame Assembly ITEM NO. 1 NO. REQ’D 1 ITEM NO. 14 NO. REQ’D 1 17532.00 Stand 2 1 17506.50 17511.00 Overflow Door Panel Corner 15 1 17402.00 Overflow Gasket 3 2 4 4 17506.00 Door 16 24 00906.00 ¼”-20 x 1/2” Hex Head Bolt 00636.17 E Z Door Glide 17 56 00924.00 5 ¼” SS Washer 4 17554.00 Door Guide 18 30 00912.00 ¼”-20 Nylon Lock Nut 6 2 17552.00 Door Stop 19 4 01310.00 Bullet Feet 7 1 17507.10 Air Gap Baffle 20 1 07522.50 Wash Tank Heater Cover 8 4 00905.00 ¼” – 20 x ½ Truss Head Bolt 21 1 17522.00 Booster Heater Cover 9 1 01505.10 Tray Track 22 1 01505.16 Tray Track Rail 10 2 17510.00 Strainer Basket 23 2 00941.00 8/32” x 5/8” Pan Head Screw 11 1 01577.10 Scrap Trap Body 24 2 03801.00 10/32” Lock Nut 12 1 01577.20 Scrap Trap Drawer 25 1 17530.00 Wrapper 13 1 17579.00 Scrap Trap Holder 26 1 17531.00 Pan P/N DESCRIPTION Model CMA-180 Parts Manual Rev. 2.04 P/N DESCRIPTION 4 1.1.3 Drain System Assembly ITEM NO. 1 NO. REQ’D 1 00113.17 2 1 00114.00 Drain Tee Casting ITEM NO. 11 NO. REQ’D 6 00901.00 5/16 –18 x 1” Hex Head Bolt Drain Tee Gasket 12 6 13805.00 5/16-18 Nylon Lock Nut P/N DESCRIPTION P/N DESCRIPTION 3 1 00121.18 Drain Stopper “O” Ring 13 1 01313.00 2” PVC Slip x MIPT Adapter *4 1 00121.17 Drain Stopper 14 1 05030.17 2” x 4” PVC Tubing 5 1 17581.00 Drain Linkage 15 1 01312.00 PVC Slip x Slip 90 Ell 6 1 17580.50 Drain Linkage Spacer 16 1 05030.27 2” x 6” PVC Tubing 7 1 00912.00 ¼-20 Nylon Lock Nut 17 1 01320.17 2” PVC Tee SxSxS 8 1 17580.00 Drain Lever 18 1 05030.10 2” x 3” PVC Tubing 9 1 00910.00 ¼”-20 x 1 ½” Hex Head Bolt 19 1 01315.17 2” No Hub * #00121.17 includes #00121.18 Model CMA-180 Parts Manual Rev. 2.04 5 1.1.4 Plumbing System Assembly ITEM NO. 1 NO. REQ’D 1 00710.50 Vacuum Breaker ¾” Watts 1A -- 00421.51 1B -- 1C 1D ITEM NO. 11A NO. REQ’D 1 00738.15 Water Sol Valve Coil 220V Pan Head Screw SS 6-32 x 1/4” 11B -- 03603.20 Water Sol Valve Bonnet ½” 00735.60 Vacuum Breaker Brass Bonnet ¾” 11C -- 00786.00 Water Sol Plunger G Style ½” & ¾” with spring -- 00735.00 Vacuum Breaker Repair Kit ¾” 11D -- 00707.00 Water Sol Repair Kit JE ½” -- 00739.50 Vacuum Breaker Cap 12 2 41030.10 Elbow 90° ½” FXF 2 3 13639.00 Nipple SS ¾” Close 13 1 00760.00 Coupling 5/8” x ½” MIP 3 3 13633.00 Elbow FXF Brass ¾” 14 1 13028.00 Ball Valve 3/4” 4 1 13613.00 Nipple ¾” x 5 ½” Brass 15 -- 13028.10 ¾” Ball Valve Repair Kit P/N DESCRIPTION P/N DESCRIPTION 5 2 13602.00 Jamb Nut Brass ¾” 16 2 13635.10 Nipple Brass 2/4” x 2” 6 1 13602.45 Pressure Regulator ½” 17 4 00742.00 Nipple ½” x 1 ½” 7 1 00716.10 Brass Tee ¾” x ¾” x ½” FXFXF 18 1 00743.10 Tee ½” FXFXF 8 1 13604.00 Bushing ½” x ¼” Brass 19 1 00780.00 Nipple ½” x 2 ½” 9 1 13605.00 Pressure Gauge 10 1 03603.15 Water Sol Valve 1/2” 220V JE-C Series Model CMA-180 Parts Manual Rev. 2.04 20 - 00705.05 Water Sol Valve ¾” 220V JE 20A - 00706.00 Water Sol Repair Kit JE ¾” 20B - 00705.20 Water Sol Valve Bonnet ¾” 6 1.1.5 ITEM NO. 1 NO. REQ’D 1 Wash Spray System P/N DESCRIPTION 00303.17 Manifold ITEM NO. 9 NO. REQ’D 8 00912.00 Nylon Lock Nut ¼” – 20 P/N DESCRIPTION *2 1 00360.24 Lower Spray Base Assembly 10 4 00914.10 Hex Head Bolt ¼”-20”x5/8” **3 1 00361.10 Upper Spray Base Assembly 11 2 00966.10 Hex Head SS Bolt 10-32 4 2 00304.17 Wash Spray Arm 12 4 00363.00 Spray Base Lock Pin 5 4 00308.50 Spray Arm End Plug SS 13 1 00302.00 Spray Base Gasket 6 2 00302.51 Spray Base “O” Ring 14 1 00225.00 Compression Gasket 7 4 00905.00 Truss Head Bolt ¼”-20”x1/2” 15 1 00221.20 1” Comp. Fit.x1”MIP SS 8 12 00924.00 SS Washer ¼” 16 1 00759.17 Base Quick Release W/Nipple 17 2 00341.00 Spray Arm Bearing **P/N 00361.10 Includes Items 11,12 & 6 *P/N 00360.24 Includes Items 11, 12 & 6 Model CMA-180 Parts Manual Rev. 2.04 7 1.1.6 ITEM NO. 1 Final Rinse System NO. REQ’D 1 ½” Vacuum Breaker Watts ITEM NO. 10 P/N 03624.00 DESCRIPTION NO. REQ’D 1 P/N DESCRIPTION 13306.17 Final Rinse Elbow Assy 1A -- 03623.00 ½” Vacuum Brkr Kit- Watts 11 2 04306.00 Square Manifold Gasket 1B -- 03624.25 ½” Brass Bonnet 12 2 41030.10 ½” 90 deg Ell FxF (Rm) 1C -- 00739.50 ¾” Vacuum Breaker Cap SS 13 1 17401.00 Final Rinse Manifold 1D -- 00421.51 6-32 x ¼” SS Pan Head Screw Phillips 14 2 13642.00 ½” Brass Plug 2 1 05004.10 3/8” SS Tubing 15 1 00780.00 Nipple Bras ½” x 2 ½” 3 1 13607.10 3/8” Comp x ½” MIP Elbow 16 1 00743.10 ½” Tee F x F x F 3A 1 00436.20 Comp Fitting Nut 17 4 00308.17 Rinse Arm SS End Plug 4 2 04305.17 Bearing Gasket 18 2 00304.19 Rinse Arm w/Bearing 5 4 00760.00 5/8” Comp x ½” MIP Adapter 19 8 13304.55 SS Final Rinse Spray Jet Ht 6 1 13629.00 ½” S.S. Close Nipple 20 4 00926.00 SS Washer 5/16” 7 1 13629.82 Nipple SS ½” x 5 ½” 21 8 00926.00 SS Washer 5/16” 8 2 05007.17 5/8” OD .049 Wall 304 SS Tubing 22 4 00912.00 ¼”-20 Nylon Lock Nut 9 1 13669.45 Mixing Chamber SS 23 1 13607.00 Water Inlet 9A 2 03232.00 1/8” Male Plug 24 1 13607.20 Comp Fitting Sleve Model CMA-180 Parts Manual Rev. 2.04 8 1.1.7 Door Handle Assembly ITEM NO. 1 NO. REQ’D 1 00613.32 Door Handle 2 1 01556.50 3 2 4 5 ITEM NO. 10 NO. REQ’D 2 00900.00 Cotter Pin Right Door Handle Support 1” 11 4 00906.00 ¼”-20 x ½” Hex Head screw 00603.07 Door Spring Extension Rod 12 8 00924.00 ¼” SS Washer 2 00602.00 Door Spring 13 8 00912.00 ¼”-20” Nylon Insert Lock Nut 2 17552.00 Door Stop 14 4 00610.00 Door Handle Spacer (Small) P/N DESCRIPTION P/N DESCRIPTION 6 2 01553.00 Door Handle Link 15 4 00611.00 Door Handle Spacer (Large) 7 2 00606.00 5/16”-18 x 7” Eyebolt 16 2 00607.04 Door Handle Grip 8 2 00913.00 5/16”-18” Nut 17 1 01555.50 Left Door Handle Support 9 2 00926.00 5/16” SS Washer 18 4 00903.00 ¼”-20 x 1 ¾” Hex Screw Model CMA-180 Parts Manual Rev. 2.04 9 1.1.8 Corner Door Handle Assembly ITEM NO. 1 NO. REQ’D 1 00613.04 Door Handle 2 1 00619.34 2A 1 3 1 ITEM NO. 13 NO. REQ’D 14 00912.00 ¼-20 Nylon Lock Nut Door Handle Mntg Plate Long 14 4 00610.00 Door Handle Spacer (Sm) 00619.44 Door Handle Mntg Plate Short 15 4 00611.00 Door Handle Spacer (Lg) 00603.04 Door Spring Extension 16 2 00903.00 ¼-20 x 1 ¾” Hex Head Bolt P/N DESCRIPTION P/N DESCRIPTION 4 2 00602.00 Door Spring 17 9 00926.00 5/16” SS Washer 5 2 17506.00 Door 18 2 00910.00 ¼”-20 x 1/2” Hex Head Bolt 6 2 01553.00 Door Handle Link 19 2 00607.04 Door Handle Cap 7 1 00606.00 5/16”-18 x 7” Eyebolt 20 8 00920.00 5/16-18 x 3/4” Hex Head Bolt 8 9 00913.00 5/16”-18” Nut 21 1 00563.30 Limit Switch Door Bracket 9 10 00905.00 ¼”-20 x 1/2” Truss Head Bolt 22 1 17506.50 Door Panel Corner 10 1 00900.00 Cotter Pin 23 1 17507.10 Air Gap Corner 11 2 01552.00 Door Stop 12 16 00924.00 ¼” SS Washer Model CMA-180 Parts Manual Rev. 2.04 10 1.1.9 Pump System Assembly ITEM NO. 1 NO. REQ’D 1 00201.00 2 1 03224.00 Pump Motor 1 HP ITEM NO. 8 NO. REQ’D 1 00208.00 Slip Joint Nut Gasket Small Pump Base 9 1 04204.00 Compression Nut (2.5) P/N DESCRIPTION P/N DESCRIPTION 3 6 00921.00 3/8”-16 x 34” Hex Head Bolt 10 2 00906.00 ¼-20 x 1/2” Hex Bolt 3A 2 00975.00 3/8-16 x 1 ½” Stud 11 2 00924.00 ¼” SS Washer 4 1 00206.00 Pump Seal Kit 12 2 00912.00 ¼”-20 Nylon Lock Nut 5 1 03226.00 Pump “O” Ring 13 2 00238.00 3/8” Male Plug 6 1 03222.05 Impeller *14 Assy. 00200.10 Pump Assy 7 1 04206.00 Pump Cover 15 1 00208.20 Slip Joint Nut Friction Ring *P/N 00200.10 Includes Items 1,2,3,4,5 and 6 Model CMA-180 Parts Manual Rev. 2.04 11 1.1.10 Wash Tank Heater NO. REQ’D 1 13417.65 Wash Tank Heater 5KW 3PH 1 13417.64 Wash Tank Heater 7KW 3PH 1A 1 13417.89 Heater Thermostat 2 1 13463.10 Liquid Level Switch ITEM NO. 1 P/N DESCRIPTION 3 1 13463.50 Liquid Level Switch Shield 4 1 17523.51 Hi-Limit Switch - Wash 250 Degrees 5 1 13477.20 7/8” Probe Hole Plug 6 1 13417.45 Wash Tank Heater Gasket Model CMA-180 Parts Manual Rev. 2.04 12 1.1.11 Booster Heater ITEM NO. 1 NO. REQ’D 1 17550.00 Booster Tank 2 6 13805.00 Nylon Lock Nut 5/6”-18 P/N DESCRIPTION 3 6 00926.00 Washer SS 5/16” **4 1 13417.67 Immersion Heater 12KW 3PH 4A 1 13417.89 Thermostat 12KW Heater 5 1 17523.51 Hi-Limit Switch-Booster 250 degrees *6 1 17520.00 Booster Heater Shield* 7 1 13417.47 Booster Heater Gasket 8 1 17560.00 Complete Assembly *For Straight Through Applications Only. **Includes Gasket #13417.47 Model CMA-180 Parts Manual Rev. 2.04 13 1.1.12 Wiring Harnesses NO. REQ’D 1 17514.00 2 1 17514.17 Booster Wiring Harness 3 -- 00414.17 Harness (Complete) ITEM NO. 1 Model CMA-180 Parts Manual Rev. 2.04 P/N DESCRIPTION Harness (Without Booster) 14 1.1.13 Control Box Assembly ITEM NO. NO. REQ’D P/N DESCRIPTION ITEM NO. NO. REQ’D P/N DESCRIPTION 1 1 17503.00 Control Box 17E 2 17400.09 2 2 00470.10 Toggle Switch Rubber Boot 17F 1 17400.07 30 Amp Terminal Block-Natural 60 Amp Terminal Block-Green 3* 1 00409.17 Timer 60 Seconds (4 Cam) 18 1 03408.55 Counter Face Mount 220V 4 1 00631.05 Ice Cube Relay 220V 19 4 00911.00 Pan Head Screw 8-32 x 1/2” 5 6 Ft. 00400.85 Conduit ¾” Sealtite 20 4 00927.00 Lock Nut 8-32 6 6 Ft. 00400.10 Conduit ½” Sealtite 21 1 00421.90 Power Switch 7 2 Ft. 00400.00 Conduit 3/8” Sealtite 22 1 00449.50 Keyless Lock 8 1 00401.85 St-3/4” Straight Connector 23 1 00421.26 Rocker Switch Hole Plug 9 1 00401.10 St-1/2” Straight Connector 24 1 00404.85 Motor Contactor 208/240V 20A 10 1 00401.00 St-3/8” Straight Connector 25 6 13825.00 Pan Head Screw 8-31 x 1” 11 1 00475.00 Delimer Switch DPDT 15A 26 6 04806.00 #10 Brass Washer 12 1 03470.00 Toggle Switch Momentary (Screw Terminal) 13 8 03801.00 Nylon Lock Nut 10-32 27 2 17503.17 Control Box Sponge Long 27A 2 17503.18 Control Box Sponge Short 14 1 17400.06 15 1 13403.26 Mountain Din Rail 28 1 13003.17 Contactor 60A 3 Pole 220V Fuse 3A/250V Slow Blow 29 1 03202.00 16 2 00941.00 Thermometer “Wash” Pan Head Screw 10 -32 x 5/8” 29A 1 03202.00 Thermometer “Rinse” 29B -- 03202.00 Thermometer Bracket 30 1 13003.50 Heater Contactor 40 Amp Door Roller Switch Connector 17 1 17400.17 Terminal Block Assembly 17A 2 17400.04 30 Amp Terminal Block-Red 17B 3 17400.03 60 Amp Terminal Block-Black 31 1 00562.60 17C 4 17400.02 85 Amp Terminal Block-Natural 32 1 00562.00 Door Roller Switch 17D 2 17400.08 30 Amp Terminal Block-Blue 33 1 13426.50 Ground Block (Optional Timer 2 min.) 34 1 00421.78 Illuminated Plug * Model CMA-180 Parts Manual Rev. 2.04 15 1.1.14 Unique Parts For CMA-180TS ITEM NO. 1 NO. REQ’D 6 00636.27 Door Guide Material 2 3 17506.20 Scullery Door P/N DESCRIPTION ITEM NO. 9 NO. REQ’D 1 17401.20 Final Rinse Manifold 10 1 00221.20 1”Comp. Fitx1MIP SS P/N DESCRIPTION 3 6 17554.20 Scullery Door Guide 11 1 00303.27 Manifold 4 1 17530.20 Scullery Wrapper 12 1 00212.50 1-1/2”x1-1/4”Adapter 5 1 00613.22 Door Handle S 13 1 00204.00 Pump Cover Large 6 2 01553.20 Door Handle Link S 14 1 00203.05 Impeller 4-1/2” 7 2 00603.53 Door Spring Extension Rod 15 1 00202.00 Pump Base 8 2 05007.27 Booster Water Line Model CMA-180 Parts Manual Rev. 2.04 16 1.1.15 Unique Parts For CMA-180TC ITEM NO. 1 NO. REQ’D 1 P/N DESCRIPTION 17506.20 Door Panel Scullery Corner 2 6 00636.27 3 2 17506.20 ITEM NO. 9 NO. REQ’D 2 05007.27 Door Guide Material 11 1 17401.20 Final Rinse Manifold Scullery Door 13 1 00221.20 1”Comp. Fitx1MIP SS P/N DESCRIPTION Booster Water Line 4 4 17554.20 Scullery Door Guide 12 1 00303.27 Manifold 5 1 17530.20 Scullery Wrapper 13 1 00212.50 1-1/2”x1-1/4”Adapter 6 1 00563.60 Limit Switch Door Bracket 14 1 00204.00 Pump Cover Large 7 2 01553.20 Door Handle Link S 15 1 00203.05 Impeller 4-1/2” 8 1 00613.34 Door Handle S Corner 16 1 00202.00 Pump Base Model CMA-180 Parts Manual Rev. 2.04 17 2. Power Switch Bulb Replacement Instructions NOTE: For Old Style Machines ONLY -- Manufactured prior to May 2002 TO REPLACE BULB 1. Using a 5mm-screw driver dismount the light module from the actuator as shown in illustration 1 & 2. 2. Replace the burnt bulb with a new one P/N 17421.10 by twisting the bulb 90 degrees. 3. Mount the light module by snapping it onto the actuator as shown in illustration 3. Model CMA-180 Parts Manual Rev. 2.04 18 3. 180 Conversion Kit – Corner to Straight #00617.18 INSTRUCTIONS: 1. Open dishmachine doors to their highest position so that there is little spring resistance on the door handle. Remove hardware holding the door handle to the door linkage. Save all the washers and spacers. With the door handle in “UP” position, lift spring and remove from extension rod. Remove the nut attaching the eyebolt and save all hardware. 2. To remove the door handle, simply unscrew the four bolts holding the door handle mounting plates and slide the complete assembly up and off of the cabinet. Use the bolts, nuts and washers to plug the holes in the back of the cabinet. 3. Remove door panel & hardware from left side of machine, and install door guides from kit. Remove front door and relocate to left side of machine. The service door will be used to seal off this side of machine. Relocate tray track guide to front service door side of tray track. 4. Using provided nuts, bolts and washers; mount the left and right door handle supports on the back of the cabinet. Insert the eyebolts into the brackets on the back of the dishmachine stand and screw the nuts on just enough to hold them in place. Hook both door springs and door spring extension rods on to the door handle and secure them with the washers and cotter pins. Then simply rest the door handle on the door handle supports. (You may have to lift the door handle to reach the handle supports.) 5. Swing the door handle downwards to reach the door linkages; and using the two provided bolts and existing washers and spacers, attach the door linkages to the door handle. Adjust the tension in the spring by tightening the nuts under the eyebolt bracket so that the doors can slide up and down freely. Mount the provided door handle grips on the ends of the door handle. 6. Eyebolt adjustment nuts should be adjusted to the point the doors begin to lift from a closed position. Both eyebolts should be adjusted the same. SEE “Illustration #1” for the proper location of all door handle hardware for CMA 180-S. 7. “Illustration #2” shows CMA 180-S and CMA 180-C door handle assembly. ILLUSTRATION #2 Back View Model CMA-180 Parts Manual Rev. 2.04 ILLUSTRATION #1 ITEM NO. NO. REQ’D P/N 1 2 00636.17 EZ Glide Door Guide 2 2 00603.07 Door Spring Extension Rod 3 1 00606.00 5/16-18 x 7” Eyebolt 4 1 00613.17 Door Handle DESCRIPTION 5 2 00913.00 5/16”-18 SS Nut 6 1 01555.50 L.H. Door Handle Support 7 1 01556.50 R.H. Door Handle Support 8 2 00607.04 Door Handle Grip 9 4 00924.00 ¼” SS Washer 10 2 00900.00 Cotter Pin 11 1 17506.00 Service Door 11A 1 00535.30 Door Handle Door Latch Bracket 12 1 13915.00 12A 1 13915.06 Latch Bracket with Nut 13 1 13701.00 Open Door Latch 14 2 17554.00 Door Glide 15 4 00912.00 ¼” 20 Nylon Lock Nut 16 2 17506.60 Door Splashguard-Straight 17 1 17506.65 Service Door Splashguard-S 18 4 00610.00 Spacer Small 19 4 00962.00 ¼”-20 x 1 SS Hex Head Bolt 20 2 1222.50 Tank Plug 19 4. 180 Conversion Kit – Straight to Corner #00617.17 INSTRUCTIONS: 1. Open dishmachine door to its highest position so that there is little spring resistance on the door handle. Remove hardware that holds the door handle to the door linkage. Save all the washers and spacers. Swing the door handle towards the back of the dishmachine and dismount it from the door handle support brackets. Remove the two nuts attaching the eyebolts and save the door springs. 2. Remove the two (2) door-handle support brackets on the back of the cabinet and plug the four holes with original hardware. Remove front door and replace with left door. Remove door guides on left side of machine and attaché item No. 9 door panel-cover. The left door will now be at the front of the machine. Remove and relocate service door splashguard to left side of machine. Remove door latch for service door. The door latch is not needed on the CMA 180-C. 3. With left door facing the front, door panel on the left, and service door splashguard in place, we are now ready to install the door handle. 4. Using provided door handle, door handle mounting plates, 5/16” bolts, nuts and washers; install the door handle as shown in “Illustration #1”. Match the mounting plate holes to the cabinet holes and insert all bolts to ensure that the door handle and mounting plates are aligned. Then secure the mounting plate with nuts and washers. ITEM NO. 1 NO. REQ’D 1 00613.04 Door Handle 2 1 00619.34 Door Hdl. Mtng. Plate-Long 2A 1 00619.44 Door Hdl. Mtng. Plate-Short 3 1 00603.04 Door Spring Extension 4 9 00913.00 5/16” – 18” Nut Attach the provided extension rod to the back of the door handle. Attach one eyebolt to the frame with existing hardware, along with two springs together. Pivot the door handle, positioning handle straight up. You may now connect nd loop of 2 spring to the door extension rod. Pull handles forward and down and attach to the door links. 5 9 00926.00 5/16” SS washer Adjust the nut on the eyebolt until the doors begin to lift then back off two turns. See “Illustration #2” for proper location of all door handle hardware included on CMA 180C. 10 1 00563.20 Roller Switch Bracket 11 1 17507.10 Air Gap Baffle CMA 180C Note: You may install one of the mounting plates first, then insert the door handle pivot post in and mount the other mounting plate last. 5. 6. 7. ILLUSTRATION #2 P/N DESCRIPTION 6 1 00900.00 Cotter Pin 7 2 00607.04 Door Handle Grip 8 8 00920.00 5/16”-18 x ¾” Hex Head Bolt 9 1 17506.50 Door Panel-Cover “Illustration #3” shows CMA 180-S and CMA 180-C “Door Handle Assembly”. ILLUSTRATION #3 Back View ILLUSTRATION #1 Back View Note: Door handle mounting plates come in two sizes. Longer is mounted on back-right side. Model CMA-180 Parts Manual Rev. 2.04 20
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Key Features
- Sturdy stainless steel construction for durability
- Large capacity to accommodate high-volume dishwashing
- Variety of wash cycles to handle different types of dishes
- Energy-efficient design to reduce operating costs
Related manuals
Frequently Answers and Questions
What is the capacity of the CMA-180TS?
The CMA-180TS has a large capacity to accommodate high-volume dishwashing.
What types of dishes can the CMA-180TS wash?
The CMA-180TS can wash a variety of dishes, including plates, glasses, silverware, and pots and pans.
Is the CMA-180TS energy efficient?
Yes, the CMA-180TS is equipped with an energy-efficient design to reduce operating costs.
advertisement