Motorola MBP41 User manual

USER’S GUIDE
MBP41, MBP41/2,
MBP41/3, MBP41/4
BABY MONITOR
USER’S GUIDE
The features described in user's guide are subject to
modifications without prior notice.
Welcome...
to your new Motorola Baby Monitor!
Thank you for purchasing the MBP41, MBP41/2, MBP41/3, MBP41/4.
Now you can see and hear your baby sleeping in another room or
you can monitor your older children in their playroom.
Please retain your original dated sales receipt for your records. For
warranty service of your Motorola product, you will need to provide
a copy of your dated sales receipt to confirm warranty status.
Registration is not required for warranty coverage.
For product related questions, please call:
US and Canada 1-888-331-3383
On the Web: www.motorola.com
This User's Guide provides you with all the information you need
to get the most from your product.
Before you can use the baby monitor, we recommend you insert
and fully charge the battery in the parent unit, so that it continues
to work if you disconnect it from the power supply to carry it to
another location. Please read the Safety Instructions on page 6
before you install the units.
Got everything?
• 1 x Parent unit
• 1 x Baby unit
• 1 x Rechargeable Ni-MH battery pack for the parent unit
• 1 x Power adapter for the Parent unit
• 1 x Power adapter for the Baby unit
In multi-camera packs, you will find one or more additional
camera units with power adapter units.
Overview of the Parent Unit
10 11
12
14
1
15
2
6
3
7
4
8
5
9
18
16
19
17
13
1. Display (LCD screen)
2. Up Key +
Normal Mode: Tilt Up
Menu Mode: Up
3. Down Key Normal Mode: Tilt Down
Menu Mode: Down
4. Left Key <
Normal Mode: Pan Left
Menu Mode: Left
5. Right Key >
Normal Mode: Pan Right
Menu Mode: Right
6. Menu Key M
Press to open the Menu options
7. OK Key O
8. Video ON/OFF Key V
In monitor mode, press to turn
OFF the LCD display
Press again to turn ON the
LCD display
9. Talk Key T
Press and hold to speak to
your baby
10. Power Adapter / Battery LED
BLUE when mains adapter
power on.
RED when battery low.
11. Unit ON/OFF LED (Green)
12. Audio Level LED (Green,
Orange, Red, Red)
13. Microphone
14. Power Key P
Press and Hold to turn the unit
ON/OFF
15. Antenna
Lift the antenna for optimal
reception
16. Battery cover
17. Stand
18. Speaker
19. Power Adapter Socket
Parent unit menu icons
1
N
T
Signal Level (5 Levels)
B
Battery Level Control (4 Levels)
H
J
K
L
Night Vision Mode (Screen changes to Black/White)
Talk Mode
Pan Left
Pan Right
Tilt Up
Tilt Down
Parent unit menu icons (cont’d)
Volume Level Control (8 Levels)
*
Brightness Level Control (8 Levels)
&
Zoom Level Control (1X, 2X)
Z
Alarm Setting (6h, 4h, 2h, OFF)
A
Cam Control (scan, view, add, del)
C
Overview of Your Baby Unit
6
1
2
3
9
4
10
5
7
1. Photo Sensor
(Night Vision Mode)
2. Camera Lens
3. Infared LEDs
4. Power LED
5. Microphone
8
6.
7.
8.
9.
10.
Speaker
ON/OFF Switch
Power Adapter Connector
Antenna
Pair Key
Important guidelines for installing your Baby Monitor
•
•
•
•
•
To use your Video Monitor Baby and Parent Unit together, you must
be able to establish a radio link between them, and the range will be
affected by environmental conditions.
Any large metal object, like a refrigerator, a mirror, a filing cabinet,
metallic doors or reinforced concrete between the Baby and Parent
Unit may block the radio signal.
The signal strength may also be reduced by other solid structures, like
walls, or by radio or electrical equipment, such as TVs, computers,
cordless or mobile phones, fluorescent lights or dimmer switches.
Use of other 2.4GHz products, such as wireless networks (Wi-Fi®
routers), Bluetooth ® systems, or microwave ovens, may cause
interference with this product, so keep the baby monitor away at least
5ft (1.5m) from these types of products, or turn them off if they appear
to be causing interference.
If the signal is weak, try moving the Parent and/or the Baby Unit to
different positions in the rooms.
1. Safety Instructions ......................................................................... 6
2. Getting Started ............................................................................... 8
2.1
2.2
2.3
2.4
Baby Unit Power Supply.................................................................8
Parent Unit Battery Installation .......................................................8
Parent Unit Power Supply ..............................................................9
Registration (Pairing)....................................................................10
3. Using the Baby Monitor ...............................................................11
3.1
3.2
3.3
3.4
3.5
Setting up .....................................................................................11
Pan and Tilt ..................................................................................11
Night Vision Mode ........................................................................11
Talk Mode.....................................................................................11
Video ON/OFF..............................................................................11
4. Parent Unit Menu Options ..........................................................12
4.1
4.2
4.3
4.4
4.5
5.
6.
7.
8.
Volume .........................................................................................12
Brightness.....................................................................................12
Zoom ............................................................................................12
Alarm ............................................................................................12
Camera Control ............................................................................13
4.5.1
Add (pair) a camera .......................................................13
4.5.2
View a camera ...............................................................13
4.5.3
Delete a camera .............................................................14
4.5.4
Scan the cameras ..........................................................14
Disposal of The Device (environment) ....................................... 15
Cleaning ........................................................................................ 16
Help................................................................................................ 17
General Information ..................................................................... 19
Table of contents
5
ENGLISH
Table of contents
1. Safety Instructions
WARNING:
STRANGULATION HAZARD - Keep the unit and adapter cord
more than 3 feet from the crib and out of the baby's reach.
NEVER place camera or cords within the crib.
Secure the cord more than 3 feet away from the baby's reach.
Never use extension cords with AC Adapters. Only use the AC
Adapters provided.
CAMERA SET UP & USE:
● Determine a location for the CAMERA that will provide the best
view of your baby in his crib.
● Place the CAMERA on a flat surface, such as a dresser, bureau,
or shelf.
● NEVER place camera or cords within the crib.
WARNING
This baby monitor is compliant with all relevant standards regarding
electromagnetic fields and is, when handled as described in the User's
Guide, safe to use. Therefore, always read the instructions in this User's
Guide carefully before using the device.
• Adult assembly is required. Keep small parts away from children when
assembling.
• This product is not a toy. Do not allow children to play with it.
• This baby monitor is not a substitute for responsible adult supervision.
• Keep this user's guide for future reference.
• Do not place the baby unit or cords in the crib or within reach of the
baby (the unit and cords should be more than 3 feet away).
• Keep the cords out of reach of children.
• Do not cover the baby monitor with a towel or blanket.
6
Safety Instructions
CAUTION
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
Safety Instructions
7
ENGLISH
• Never use extension cords with power adapters. Only use the power
adapters provided.
• Test this monitor and all its functions so that you are familiar with it
prior to actual use.
• Do not use the baby monitor near water.
• Do not install the baby monitor near a heat source.
• Only use the chargers and power adapters provided. Do not use other
chargers or power adapters as this may damage the device and
battery pack.
• Only insert a battery pack of the same type.
• Do not touch the plug contacts with sharp or metal objects.
2. Getting Started
2.1
Baby Unit Power Supply
1. Connect the small plug of the power adapter to the baby unit and the
other end to the electrical outlet.
NOTE
Only use the enclosed power adapter (5.9V DC / 1000mA).
2. Slide the ON/OFF switch to the ON position. The power LED will
light up in green.
3. Slide the ON/OFF switch to the OFF position to turn the Baby Unit off.
2.2
Parent Unit Battery Installation
Black Red
1. Insert the wire tab of the rechargeable battery pack into the contact
slot as shown above and fit the battery pack into the compartment.
Small cross head or
Flat end screw driver
8
Getting Started
2.3
ENGLISH
2. Replace the battery cover over the compartment and gently tighten
the screw in a clockwise direction using a Small cross head or Flat
end screw drivers.
Parent Unit Power Supply
IMPORTANT
Installing the rechargeable battery pack and charging it fully before use is
recommended. This will allow the unit to operate on battery in the event
of a power failure.
1. Connect the small plug of the power adapter to the parent unit and
the other end to the electrical outlet. Only use the enclosed power
adapter (6V DC/500mA).
2. Press and hold the P POWER ON/OFF button for 1 second to
turn ON the parent unit.
3. Once the baby and parent units are switched on, the display on the
parent unit will show the video captured by the baby unit.
4. If there is no connection or you are out of range, the video display
will go off and the words No Signal will be shown on the LCD display,
and the unit will beep every 5 seconds. Move the parent unit closer
to the baby unit until the link is re-established.
5. Press and hold the P POWER ON/OFF button, until the progress
bar finishes scrolling, to turn OFF the parent unit.
NOTE
The battery icon
turns RED to indicate that the battery is low, and it
gives a beep every 16 seconds. The battery needs to be recharged. The
battery pack takes about 16 hours to charge fully.
0
Getting Started
9
When charging
1. If the parent unit is turned OFF, when the adapter is plugged in, a
mains plug logo will display briefly, followed by a large battery icon
with internal segments cycling for 45 seconds. The Blue LED in the
top left corner lights up to indicate the adapter is plugged in.
2. If the parent unit is turned ON, when the adapter is plugged in, the
battery icon in the screen's top right corner will show that the battery
is charging by cycling the internal segments. The Blue LED in the top
left corner lights up to indicate the adapter is plugged in.
2.4
Registration (Pairing)
The Baby monitor is pre-registered to your Parent Unit. You do not need
to register it again unless the Baby Unit loses its link with the Parent Unit.
To re-register your Baby Unit, or register a new Baby Unit, follow the
procedure below:
1. Press the M Menu button of the parent unit and the menu bar will
pop up.
2. Press the < LEFT button or > RIGHT button until C is highlighted,
and the del/add/view/scan menu will pop up.
3. Press the + UP button or - DOWN button to select ADD, and press
the OK button to confirm.
4. CAM 1 / CAM 2 / CAM 3 / CAM 4 will pop up, press the + UP button or DOWN button to select the desired CAM and press the OK button to
start searching for a camera unit. The green audio level LED will
flash rapidly while searching.
5. Press and hold the PAIR button underneath the baby unit until the parent
unit finds the camera, beeps and the video from the camera appears.
NOTE
If a particular Baby Unit was registered previously, registering this current
Baby Unit again will overwrite the old registration.
10
Getting Started
3.1
Setting up
• Place the baby unit in a convenient location (e.g. on a table) and point
the camera lens towards the area you want to monitor.
• Adjust the baby unit's head angle by rotating the camera up, down, left
and right until you are satisfied with the image in the parent unit.
NOTE
Do not place the baby unit within the baby's reach! If there is interference
with the picture or sound, try moving the units to different locations, and
ensure they are not close to other electrical equipment.
3.2
Pan and Tilt
The camera can be remotely controlled from the parent unit when in
normal video mode.
1. Press the + UP button or - DOWN button to tilt upward or downward.
2. Press the < LEFT button or > RIGHT button to pan left or right.
3.3
Night Vision Mode
The baby unit has 8 high-intensity infrared LEDs for picking up clear
images in the dark. When the built-in photo sensor detects a low level of
ambient light, the LEDs will automatically activate and the screen on the
parent unit will display in black and white. The N icon will be displayed on
the screen.
3.4
Talk Mode
Press and hold the T TALK button on the parent unit to talk to your baby
through the baby unit's loudspeaker. The T icon will be displayed at the
top of the LCD screen.
3.5
Video ON/OFF
Press the V VIDEO ON/OFF key to turn the LCD display on or off, but
still leave the audio monitor on.
Using the Baby Monitor
11
ENGLISH
3. Using the Baby Monitor
4. Parent Unit Menu Options
4.1
Volume
1. Press the M Menu button and the menu bar will pop up.
2. If necessary, press the < LEFT button or > RIGHT button until *
is highlighted.
3. Press the + UP button or - DOWN button to select the desired
volume level from level 1 ~ 8. (The default volume level setting is
level 4.)
4.2
Brightness
1. Press the M Menu button and the menu bar will pop up.
2. Press the < LEFT button or > RIGHT button until & is highlighted.
3. Press the + UP button or - DOWN button to select the desired
brightness level from level 1 ~ 8. (The default brightness level setting
is level 4.)
4.3
Zoom
1. Press the M Menu button and the menu bar will pop up.
2. Press the < LEFT button or > button until Z is highlighted.
3. Press the + UP button or - DOWN button to select the 1X or 2X
Zoom. (The default setting is 1X.)
4.4
Alarm
1. Press the M Menu button and the menu bar will pop up.
2. Press the < LEFT button or > RIGHT button until A is highlighted.
3. Press the + UP button or - DOWN button to select the alarm time
(6h, 4h, 2h). (The default setting is Alarm OFF.)
If an alarm time is selected, the parent unit will beep at the end of the
selected 6, 4 or 2 hour period, and the alarm icon will flash red. The alam
is cancelled after about 60 seconds or by pressing any button on the
parent unit.
Set the alarm again if you want another alarm call.
12
Parent Unit Menu Options
Camera Control
4.5.1 Add (pair) a camera
1. Press the M Menu button and the menu bar will pop up.
2. Press the < LEFT button or > RIGHT button until C is highlighted,
and the del/add/view/scan menu will pop up.
3. Press the + UP button or - DOWN button to select ADD, and press
the OK button to confirm.
4. CAM 1 / CAM 2 / CAM 3 / CAM 4 will pop up, press the + UP button or DOWN button to select the desired CAM, and press the OK button
to start searching for a camera unit. The green audio level LED will
flash rapidly while searching.
5. Press and hold the PAIR button under the baby unit until the parent
unit finds the camera, beeps and the camera picture appears.
NOTE
A camera can only be registered to one parent unit at a time.
4.5.2 View a camera
1. Press the M Menu button and the menu bar will pop up.
2. Press the < LEFT button or > RIGHT button until C is highlighted
and the del/add/view/scan menu pops up.
3. Press the + UP button or - DOWN button to select VIEW, and press
the OK button to confirm.
4. CAM 1 / CAM 2 / CAM 3 / CAM 4 will pop up, press the + UP button or DOWN button to select desired CAM, and press the OK button to
view the picture from that camera.
TIP
Press OK repeatedly for a quick way to View cameras without the menu.
Parent Unit Menu Options
13
ENGLISH
4.5
4.5.3 Delete a camera
1. Press the M Menu button and the menu bar will pop up.
2. Press the < LEFT button or > RIGHT button until C is highlighted,
and the del/add/view/scan menu will pop up.
3. Press the + UP button or - DOWN button to select DEL, and press
the OK button to confirm.
4. CAM 1/CAM 2/CAM 3/CAM 4 will pop up, press the + UP button or DOWN button to select the desired CAM, and press the OK button
to select.
5. Press the + UP button or - DOWN button to select
, and press
the OK button to delete that registration.
4.5.4 Scan the cameras
1. Press the M Menu button and the menu bar will pop up.
2. Press the < LEFT button or > RIGHT button until C is highlighted,
and the del/add/view/scan menu will pop up.
3. Press the + UP button or - DOWN button to select SCAN, and press
the OK button to confirm.
4. The screen will then display images from each registered
camera in a loop, changing about every 12 seconds.
12 seconds.
TIP
Press OK repeatedly for a quick way to go to6FDQPRGHZLWKRXWXVLQJ
the menu.
NOTE
,IWKHSDUHQWXQLWLVLQVFDQPRGHDQGRQHRIWKHUHJLVWHUHGFDPHUDVLV
WXUQHGRIIRURXWRIUDQJHWKHVFDQZLOOVWRSDWWKHPLVVLQJFDPHUD
GLVSOD\QRVLJQDOFKHFNRUGHOFDPLIFDPHUDLVPLVVLQJDQG
HPLWDZDUQLQJEHHSHYHU\VHFRQGV
WARNING
&KHFNWKHFDPHUDDQGFRUUHFWWKHIDXOWLPPHGLDWHO\LI\RXDUHXVLQJWKDW
FDPHUDWRPRQLWRU\RXUEDE\
,I\RXZDQWWRFRQWLQXHLQFDPHUDVFDQPRGHZLWKRXWWKDWFDPHUDGHOHWH
WKHFDPHUDVHH'HOHWHDFDPHUDDQGVWDUWWKHVFDQDJDLQ
14
Parent Unit Menu Options
ENGLISH
5. Disposal of The Device
(environment)
At the end of the product lifecycle, you should not dispose
of this product with normal household waste. Take this
product to a collection point for the recycling of electrical
and electronic equipment. The symbol on the product,
user's guide and/or box indicates this.
Some of the product materials can be reused if you take
them to a recycling point. By reusing some parts or raw materials from
used products you make an important contribution to the protection of the
environment.
Please contact your local authorities in case you need more information
on the collection points in your area.
Dispose of the battery pack in an environmentally-friendly manner
according to your local regulations.
Disposal of The Device (environment)
15
6. Cleaning
Clean the MBP41, MBP41/2, MBP41/3, MBP41/4 with a slightly damp
cloth or with an anti-static cloth. Never use cleaning agents or abrasive
solvents.
Cleaning and care
• Do not clean any part of the product with thinners or other solvents
and chemicals –- this may cause permanent damage to the product
which is not covered by the warranty.
• Keep your MBP41, MBP41/2, MBP41/3, MBP41/4 away from hot,
humid areas or strong sunlight, and don't let it get wet.
• Every effort has been made to ensure high standards of reliability for
your MBP41, MBP41/2, MBP41/3, MBP41/4. However, if something
does go wrong, please do not try to repair it yourself –- contact
Customer Service for assistance.
16
Cleaning
ENGLISH
7. Help
Display
No display
• Try recharging or replacing the battery pack.
• Reset the units. Disconnect the battery pack of the parent unit and
unplug both the units' electrical power, then plug them back in.
• Is the unit turned on?
Press and hold the ON/OFF key P on the parent unit to turn it ON.
• Is the correct camera selected?
Change the camera number, if necessary.
• Is the video display turned on?
Press the VIDEO ON/OFF key V to turn it on.
• When operating using batteries only, the Display will go blank after 2
minutes to save power. The unit is still active and will give you audio
alerts. You can reactivate the screen by pressing any key.
Registration
If the Baby Unit has lost its link with the Parent Unit
• Try recharging or replacing the battery pack.
• If the Baby Unit is too far away it may be going out of range, so move
the Baby Unit closer to the Parent Unit.
• Reset the units by disconnecting them from the battery and electrical
power. Wait about 15 seconds before reconnecting. Allow up to one
minute for the Baby Unit and the Parent Unit to synchronize.
• See 2.4 Registration (Pairing), if there is a need to re-register the
units.
Help
17
Interference
Noise interference on your parent unit
• Your baby and parent units may be too close. Move them farther apart.
• Make sure there is at least 3 to 6 feet between the 2 units to avoid
audio feedback.
• lf the baby unit is too far away it may be out of range, so move the
baby unit closer to the parent unit.
• Make sure the baby and parent units are not near other electrical
equipment, such as a television, computer or cordless/mobile telephone.
• Use of other 2.4GHz products, such as wireless networks (Wi-Fi ®
routers), Bluetooth® systems, or microwave ovens, may cause
interference with this product, so keep the baby monitor away at least
5ft (1.5m) from these types of products, or turn them off if they appear
to be causing interference.
• If the signal is weak, try moving the Parent and/or Baby Unit to
different positions in the rooms.
18
Help
ENGLISH
8. General Information
lf your product is not working properly....
1. Read this User's Guide or the Quick Start Guide.
2. Visit our website:
www.motorola.com
3. Contact Customer Service:
US and Canada 1-888-331-3383
To order a replacement battery pack, contact customer service or visit our
website.
Consumer Products and Accessories Limited
Warranty ("Warranty")
Thank you for purchasing this Motorola branded product manufactured
under license by Binatone Electronics International LTD ("BINATONE").
What Does this Warranty Cover?
Subject to the exclusions contained below, BINATONE warrants that this
Motorola branded product ("Product") or certified accessory
("Accessory") sold for use with this product that it manufactured to be free
from defects in materials and workmanship under normal consumer
usage for the period outlined below. This Warranty is your exclusive
warranty and is not transferable.
Who is covered?
This Warranty extends only to the first consumer purchaser, and is not
transferable.
General Information
19
What will BINATONE do?
BINATONE or its authorized distributor at its option and within a
commercially reasonable time, will at no charge repair or replace any
Products or Accessories that do not conform to this Warranty. We may
use functionally equivalent reconditioned/ refurbished/ pre-owned or new
Products, Accessories or parts.
What Other Limitations Are There?
ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE
DURATION OF THIS LIMITED WARRANTY, OTHERWISE THE
REPAIR OR REPLACEMENT PROVIDED UNDER THIS EXPRESS
LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE
CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED. IN NO EVENT SHALL
MOTOROLA OR BINATONE BE LIABLE, WHETHER IN CONTRACT
OR TORT (INCLUDING NEGLIGENCE) FOR DAMAGES IN EXCESS
OF THE PURCHASE PRICE OF THE PRODUCT OR ACCESSORY, OR
FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES OF ANY KIND, OR LOSS OF REVENUE OR PROFITS,
LOSS OF BUSINESS, LOSS OF INFORMATION OR OTHER
FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE
ABILITY OR INABILITY TO USE THE PRODUCTS OR ACCESSORIES
TO THE FULL EXTENT. THESE DAMAGES MAY BE DISCLAIMED BY
LAW.
Some jurisdictions do not allow the limitation or exclusion of incidental or
consequential damages, or limitation on the length of an implied
warranty, so the above limitations or exclusions may not apply to you.
This Warranty gives you specific legal rights, and you may also have
other rights that vary from one jurisdiction to another.
20
General Information
Consumer Accessories
Consumer Products and
Accessories that are Repaired
or Replaced
Length of Coverage
One (1) year from the date of the
products original purchase by the first
consumer purchaser of the product.
Ninety (90) days from the date of the
accessories original purchase by the
first consumer purchaser of the
product.
The balance of the original
warranty or for Ninety (90) days
from the date returned to the
consumer, whichever is longer.
Exclusions
Normal Wear and Tear. Periodic maintenance, repair and replacement
of parts due to normal wear and tear are excluded from coverage.
Batteries. Only batteries whose fully charged capacity falls below 80% of
their rated capacity and batteries that leak are covered by this Warranty.
Abuse & Misuse. Defects or damage that result from: (a) improper
operation, storage, misuse or abuse, accident or neglect, such as
physical damage (cracks, scratches, etc.) to the surface of the product
resulting from misuse; (b) contact with liquid, water, rain, extreme
humidity or heavy perspiration, sand, dirt or the like, extreme heat, or
food; (c) use of the Products or Accessories for commercial purposes or
subjecting the Product or Accessory to abnormal usage or conditions; or
(d) other acts which are not the fault of MOTOROLA or BINATONE, are
excluded from coverage.
Use of Non-Motorola branded Products and Accessories. Defects or
damage that result from the use of Non-Motorola branded or certified
Products or Accessories or other peripheral equipment are excluded from
coverage.
General Information
21
ENGLISH
Products Covered
Consumer Products
Unauthorized Service or Modification. Defects or damages resulting
from service, testing, adjustment, installation, maintenance, alteration, or
modification in any way by someone other than MOTOROLA, BINATONE
or its authorized service centers, are excluded from coverage.
Altered Products. Products or Accessories with (a) serial numbers or
date tags that have been removed, altered or obliterated; (b) broken seals
or that show evidence of tampering; (c) mismatched board serial
numbers; or (d) nonconforming or non-Motorola branded housings, or
parts, are excluded from coverage.
Communication Services. Defects, damages, or the failure of Products
or Accessories due to any communication service or signal you may
subscribe to or use with the Products or Accessories is excluded from
coverage.
How to Obtain Warranty Service or Other Information?
To obtain service or information, please call:
US and Canada 1-888-331-3383
You will receive instructions on how to ship the Products or Accessories
at your expense and risk, to a BINATONE Authorized Repair Center.
To obtain service, you must include: (a) the Product or Accessory; (b) the
original proof of purchase (receipt) which includes the date, place and
seller of the Product; (c) if a warranty card was included in your box, a
completed warranty card showing the serial number of the Product; (d) a
written description of the problem; and, most importantly; (e) your
address and telephone number.
These terms and conditions constitute the complete warranty agreement
between you and BINATONE regarding the Products or Accessories
purchased by you, and supersede any prior agreement or
representations, including representations made in any literature
publications or promotional materials issued by BINATONE or
representations made by any agent, employee or staff of BINATONE, that
may have been made in connection with the said purchase.
22
General Information
FCC Part l5
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the Federal
Communications Commission (FCC) rules. These limits are designed to
provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications to this equipment not expressly approved by
the party responsible for compliance could void the user's authority to
operate the equipment.
This device complies with Part 15 of the FCC rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Privacy of
communications may not be ensured when using this device.
To ensure safety of users, the FCC has established criteria for the amount of
radio frequency energy that can be safely absorbed by a user or bystander
according to the intended usage of the product. This product has been tested
and found to comply with the FCC criteria. The Baby unit shall be installed
and used such that parts of the user's body other than the hands are
maintained at a distance of approximately 20 cm (8 inches) or more.
This Class B digital apparatus complies with Canadian ICES-003.
General Information
23
ENGLISH
FCC and IC regulations
WARNING
Changes or modifications, to this equipment not expressively approved
by the party responsible for compliance could void the user's authority to
operate the equipment.
The socket-outlet shall be installed neat the equipment and shall be
easily accessible.
Industry Canada
This device complies with Industry Canada licence-exempt RSS
standard(s): Operation is subject to the following Two conditions:(1) this
device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation
of the device.
The term "IC: " before the certification/registration number only signifies
that the Industry Canada technical specifications were met. This product
meets the applicable Industry Canada technical specifications.
Le présent appareil est conforme aux CNR d’Industrie Canada
applicables aux appareils radio exempts de licence. L’exploitation est
autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas
produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout
brouillage radioélectrique subi, même si le brouillage est susceptible d’en
compromettre le fonctionnement.
24
General Information
ENGLISH
Technical Specifications
Baby unit (Model: MBP41BU)
Frequency
2.4GHz to 2.48GHz
Image sensor
color CMOS 0.3M Pixels
Lens
f 2.5mm, F 2.8
IR LED
8 pcs
Power
Adapter: 5E-AD 059100-U; Input: 100-240V,
50/60Hz 300mA; Output: 5.9V, 1000mA
OR
Adapter: BLJ5W059100P; Input: 100-240V,
50/60Hz 150mA; Output: 5.9V, 1000mA
WARNING
Use only with provided power supply.
General Information
25
Parent unit (Model: MBP41PU)
Frequency
2.4GHz to 2.48GHz
Display
2.8" diagonal TFT LCD
Display colors
16.7M color LCD
Brightness control
8 steps
Volume control
8 steps
Power
Adapter: 5E-AD 060050-U; Input: 100-240V,
50/60Hz 300mA; Output: 6.0V, 500mA
OR
Adapter: BLJ5W060050P; Input: 100-240V,
50/60Hz 150mA; Output: 6.0V, 500mA
WARNING
Use only with provided power supply.
OR
Model - DESAY NI-MH AAA 3 x 1.2V
900mAh rechargeable battery pack
WARNING
Do not use non-rechargeable batteries for the
Parent Unit. Risk of explosion if battery is replaced
by an incorrect type. Dispose of used batteries
according to the instructions.
26
General Information
Manufactured, distributed or sold by
Binatone Electronics International LTD.,
official licensee for this product.
MOTOROLA and the Stylized M Logo,
are trademarks or registered trademarks
of Motorola Trademark Holdings, LLC.
and are used under license. All other
trademarks are the property of their
respective owners.
© 2013 Motorola Mobility LLC. All rights
reserved.
Version 3.0
Printed in China
">