User’s Guide
Digital Video Baby Monitor
Models: MBP36S, MBP36S-2, MBP36S-3, MBP36S-4
The features described in this User’s Guide are subject to modifications without prior notice.
Welcome...
to your new Motorola Video Baby Monitor!
Thank you for purchasing the Motorola Video Baby Monitor. Now you can see and hear your baby sleeping in another room or you can monitor your older children in their playroom.
Please retain your original dated sales receipt for your records.
For warranty service of your Motorola product, you will need to provide a copy of your dated sales receipt to confirm warranty status. Registration is not required for warranty coverage.
For product related questions, please call:
US and Canada 1-888-331-3383
Email: [email protected]
This User's Guide provides you with all the information you need to get the most from your product.
Before you can use the baby monitor, we recommend you insert and fully charge the battery in the parent unit, so that it continues to work if you disconnect it from the power supply to carry it to another location. Please
read the Safety Instructions on page 6 before you install the units.
Got everything?
• 1 x Parent unit
• 1 x Baby unit (Camera)
• 1 x Rechargeable Ni-MH battery pack
• 1 x Power adapter for the Parent unit
• 1 x Power adapter(s) for the Baby unit
In multi-camera packs, you will find one or more additional camera units with power adapter units and battery packs.
Overview of the Parent Unit
6.
7.
8.
10 11 12
14
POWER
1.
2.
3.
4.
5.
1
15
4
5
13
2
3
Display (LCD screen)
Up Key
+
Normal Mode: Tilt Up
Menu Mode: Up
Down Key
Normal Mode: Tilt Down
Menu Mode: Down
Left Key
<
Normal Mode: Pan Left
Menu Mode: Left
Right Key
Normal Mode: Pan Right
Menu Mode: Right
Menu Key
-
>
M
Press to open the Menu options
OK Key O
Video ON/OFF Key
V
Press to turn OFF the LCD display
Press again to turn ON the LCD display
8
9
6
7
16
17
19
18
20
16.
17.
18.
19.
20.
9.
10.
11.
12.
13.
14.
15.
Talk Key
T
Press and hold to speak to your baby
Power Adapter / Battery LED
BLUE when mains adapter power on.
RED when battery low.
Unit ON/OFF LED (Green)
Audio Level LED (Green,
Orange, Red, Red)
Microphone
Power Key
P
Press and Hold to turn the unit
ON/OFF
Antenna
Lift the antenna for optimal reception
Battery cover
Stand
Speaker
USB power adapter socket
AV out / Audio out
Parent unit menu icons
Signal Level (4 Levels)
Night Vision Mode (Screen changes to Black/White)
Talk Mode
Battery Level Control (4 Levels)
Pan Left
Pan Right
Tilt Up
Tilt Down
Parent unit menu icons (cont’d)
Volume Level Control (8 Levels)
Zoom Level Control (1X, 2X)
Brightness Level Control (8 Levels)
Lullaby Control (5 Song Selections)
Alarm Setting (6h, 4h, 2h, Off )
Temperature Reading (HH ºC / ºF or LL ºC / ºF)
Icon & readings turn RED > 29ºC / 84ºF, and reading display
HH ºC / ºF > 36ºC / 97 ºF)
Icon & readings turn RED < 14ºC / 57ºF, and reading display
LL ºC / ºF < 1ºC / 34 ºF)
Cam Control (scan, view, add, delete)
Screen viewing mode control (Single Screen, 4-split Screen)
V
Set Video On Timer (5 min, 30 min, 60 min)
Overview of Your Baby Unit
1
2
4
7
3
5
9
11
10
PAIR
6
8
1. Photo Sensor
(Night Vision Mode)
2. Camera Lens
3. Infrared LEDs
4. Power LED
5. Microphone
6. Speaker
7. ON/OFF Switch
8. Power Adapter Socket
9. Antenna
10. Temperature Sensor
11. Pair Key
Important guidelines for installing your Baby Monitor
• To use your Video Monitor Baby and Parent Units together, you must be able to establish a radio link between them, and the range will be affected by environmental conditions.
• Any large metal object, like a refrigerator, a mirror, a filing cabinet, metallic doors or reinforced concrete between the Baby and Parent Unit may block the radio signal.
• The signal strength may also be reduced by other solid structures, like walls, or by radio or electrical equipment, such as TVs, computers, cordless or mobile phones, fluorescent lights or dimmer switches.
• Use of other 2.4 GHz products, such as wireless networks (Wi-Fi
®
routers), Bluetooth
® systems, or microwave ovens, may cause interference with this product, so keep the baby monitor away at least 5ft (1.5m) from these types of products, or turn them off if they appear to be causing interference.
• If the signal is weak, try lifting up the Parent Unit Antenna, moving the Parent and/or the
Baby Unit to different positions in the rooms.
Table of contents
1.
Safety Instructions ..................................................................................... 6
2.
Getting Started.......................................................................................... 8
2.1
Baby Unit Power Supply .............................................................................. 8
2.2
Parent Unit Battery Installation .................................................................... 8
2.3
Parent Unit Power Supply ...........................................................................9
2.4
Registration (Pairing)................................................................................. 10
2.5
View Video Through TV............................................................................ 10
3.
Using the Baby Monitor........................................................................... 11
3.1
Setting up................................................................................................... 11
3.2
Pan and Tilt ................................................................................................ 11
3.3
Night Vision Mode.....................................................................................11
3.4
Talk Mode .................................................................................................. 11
3.5
Video ON/OFF..........................................................................................11
3.6
Temperature Display (HH °C / °F or LL °C / °F) ......................................12
4.
Parent Unit Menu Options....................................................................... 13
4.1
Volume....................................................................................................... 13
4.2
Brightness .................................................................................................. 13
4.3
Lullaby........................................................................................................ 13
4.4
Zoom.......................................................................................................... 13
4.5
Alarm.......................................................................................................... 13
4.6
Camera Control ........................................................................................ 14
4.6.1
Add (pair) a camera .................................................................. 14
4.6.2
View a camera ...........................................................................14
4.6.3
View multi-cameras on screen .................................................. 14
4.6.4
Delete a camera ........................................................................ 15
4.6.5
Scan camera .............................................................................. 15
4.7
Temperature.............................................................................................. 15
4.8
Power Saving mode .................................................................................. 15
5.
Disposal of The Device (environment) ................................................... 16
6.
Cleaning .................................................................................................. 17
7.
Help.......................................................................................................... 18
8.
General Information ................................................................................ 20
Table of contents 5
6
1. Safety Instructions
WARNING:
Strangulation Hazard: Children have
STRANGLED in cords. Keep this cord out of the reach of children (more than
3ft (1m) away). Never use extension cords with AC Adapters. Only use the AC
Adapters provided.
Safety Instructions
CAMERA SET UP & USE:
● Determine a location for the Baby Unit that will provide the best view
of your baby in his/her crib.
● Place the BABY UNIT on a flat surface, such as a dresser, bureau, or
shelf or mount the Unit to a wall securely using the keyhole slots under the stand.
● NEVER place the Baby Unit or cords within the crib.
● Do not place the Baby Unit or cords in the crib or within reach of the
baby (the unit and cords should be more than 3 feet away).
WARNING
This digital video baby monitor is compliant with all relevant standards regarding electromagnetic fields and is, when handled as described in the
User's Guide, safe to use. Therefore, always read the instructions in this User's
Guide carefully before using the device.
• Adult assembly is required. Keep small parts away from children when assembling.
• This product is not a toy. Do not allow children to play with it.
• This baby monitor is not a substitute for responsible adult supervision.
• Keep this user's guide for future reference.
• Do not place the baby unit or cords in the crib or within reach of the baby
(the unit and cords should be more than 3 feet away)
• Keep the cords out of reach of children.
• Do not cover the baby monitor with a towel or blanket.
• Never use extension cords with power adapters. Only use the power adapters provided.
• Test this monitor and all its functions so that you are familiar with it prior to actual use.
• Do not use the baby monitor near water.
• Do not install the baby monitor near a heat source.
Safety Instructions 7
• Only use the chargers and power adapters provided. Do not use other chargers or power adapters as this may damage the device and battery pack.
• Only insert a battery pack of the same type.
• Do not touch the plug contacts with sharp or metal objects.
CAUTION
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to their instructions.
8 Safety Instructions
2. Getting Started
2.1
Baby Unit Power Supply
1.
Connect the small plug of the power adapter to the baby unit (camera) and the other end to the electrical outlet.
NOTE
Only use the enclosed power adapter (5V DC / 1000mA).
2.
Slide the ON/OFF switch to the ON position. The power LED will light up in green.
3.
Slide the ON/OFF switch to the OFF position to turn the Baby Unit off.
2.2
Parent Unit Battery Installation
Red
Black
1.
Insert the wire tab of the rechargeable battery pack into the contact slot as shown above and fit the battery pack into the compartment.
Small cross head or
Flat end screw driver
2.
Replace the battery cover over the compartment and gently tighten the screw in a clockwise direction using a Small cross head or Flat end screw drivers.
Getting Started 9
2.3
Parent Unit Power Supply
IMPORTANT
Installing the rechargeable battery pack and charging it fully before use is recommended. This will allow the unit to operate on battery in the event of a power failure.
1.
Connect the small plug of the power adapter to the parent unit and the other end to the electrical outlet. Only use the enclosed power adapter (5V
DC / 600mA) with the slightly smaller DC plug.
2.
Press and hold the
P
POWER ON/OFF button for 1 second to turn ON the parent unit.
3.
Once the baby and parent units are switched on, the display on the parent unit will show the video captured by the baby unit.
4.
If there is no connection or you are out of range, the video display will go off and the unit will beep every 5 seconds. Move the parent unit closer to the baby unit until the link is re-established.
5.
Press and hold the
P
POWER ON/OFF button, until the progress bar finishes scrolling, to turn OFF the parent unit.
NOTE
The battery icon turns RED to indicate that the battery is low, and it gives a beep every 16 seconds. The battery needs to be recharged. The battery pack takes about 12 hours to charge fully.
When charging
1.
During power OFF, when adapter is plugged in, a adapter logo will display on screen and then a flashing battery logo will display for 45 sec. The Blue
LED at top left corner light up indicates adapter is plugged in.
10 Getting Started
2.
During power ON, when adapter is plugged in, the battery icon on screen's top right corner will show that the battery is charging. The Blue LED at the top left corner light up indicates adapter is plugged in.
2.4
Registration (Pairing)
The Baby monitor is pre-registered to your Parent Unit. You do not need to register it again unless the Baby Unit loses its link with the Parent Unit.
To re-register your Baby Unit, or register a new Baby Unit, follow the procedure below:
1.
Press the
M button of the parent unit and the menu bar will pop up.
2.
Press the
<
LEFT button or
>
RIGHT button until is highlighted, and the
del/add/view/scan
menu will pop up.
3.
Press the
+
UP button or
-
DOWN button to select
add
, and press the OK
4.
button to confirm.
cam 1
/
cam 2
/
cam 3
/
cam 4
will pop up, press the
+
UP button or
-
DOWN button to select the desired CAM and press the
O button to start searching for a camera unit. The green audio level LED will flash rapidly while searching.
5.
Press the
O button to confirm.
6.
Press and hold the PAIR button underneath the baby unit until the parent unit finds the camera, beeps and the video from the camera appears.
NOTE
If a particular Baby Unit was registered previously, registering this current
Baby Unit again will overwrite the old registration.
2.5
View Video Through TV
Connect a suitable AV cable into the AV OUT socket on the side of the Parent
Unit and into the AV input of the TV. Scroll to select on the Parent unit. Scroll through the AV inputs on the TV menu until the Baby monitor picture is visible.
AV cable is an optional accessory, which is to be purchased separately.
NOTE
The Monitor's power button must be turned ON and CAM pre-selected before connecting the AV cable. Once the AV cable is connected, the Monitor's controls cannot be activated.
You can hear also your baby in mono mode by connecting the 3.5mm plug wired headset to the AV OUT socket.
Getting Started 11
12
3. Using the Baby Monitor
3.1
Setting up
• Place the baby unit in a convenient location (e.g. on a table) and point the camera lens towards the area you want to monitor.
• Adjust the baby unit's head angle by rotating the camera up, down, left and right until you are satisfied with the image in the parent unit.
NOTE
Do not place the baby unit within the baby's reach! If there is interference with the picture or sound, try moving the units to different locations, and ensure they are not close to other electrical equipment.
3.2
Pan and Tilt
The camera can be remotely controlled from the parent unit.
1.
Press the
+
UP button or
-
DOWN button to tilt upward or downward.
2.
Press the
<
LEFT button or
>
RIGHT button to pan left or right.
3.3
Night Vision Mode
The baby unit has 8 high-intensity infrared LEDs for picking up clear images in the dark. When the built-in photo sensor on the top of the unit detects a low level of ambient light, the LEDs will automatically activate and the screen on the parent unit will display in black and white. The icon will be displayed at the top of the screen.
3.4
Talk Mode
Press and hold the
T
TALK button on the parent unit to talk to your baby through the baby unit’s loudspeaker. The
T icon will be displayed at the top of the LCD screen.
3.5
Video ON/OFF
Press
V
VIDEO ON/OFF key to turn the LCD display on or off, but still leave the audio monitor on.
Using the Baby Monitor
3.6
Temperature Display (HH °C / °F or LL °C / °F)
The temperature reading from the temperature sensor at the back of the Baby
Unit will be displayed at the top of the LCD screen. The readings will turn RED if the temperature goes above 29°C / 84°F or below 14°C / 57°F. The reading will change to HH °C / °F if the temperature goes above 36°C / 97°F. The reading will change to LL °C / °F if the temperature goes below 1°C / 34°F.
Using the Baby Monitor 13
14
4. Parent Unit Menu Options
4.1
Volume
1.
Press the
M
button and the menu bar will pop up.
2.
Press the
<
LEFT button or
>
button until is highlighted.
3.
Press the
+
UP button or
-
DOWN button to select the desired volume level from level 0 ~ 8. (The default volume level setting is level 4.)
4.2
Brightness
1.
Press the
M
button and the menu bar will pop up.
2.
Press the
<
LEFT button or
>
button until is highlighted.
3.
Press the
+
UP button or
-
DOWN button to select the desired brightness level from level 1 ~ 8. (The default brightness level setting is level 5.)
4.3
Lullaby
1.
Press the
M
button and the menu bar will pop up.
2.
Press the
<
LEFT button or
>
button until is highlighted.
3.
Press the
+
UP button or
-
DOWN button to select the desired song from the 5 lullabies available, or the cycle option to play all 5 songs in turn. If an individual song is selected it will only play once. (The default setting is lullaby OFF)
4.
Press OK on the selected lullabies to select the desired song sound level.
4.4
Zoom
1.
Press the
M
button and the menu bar will pop up.
2.
Press the
<
LEFT button or
>
button until is highlighted.
3.
Press the
+
UP button or
-
DOWN button to select the
1X
or
2X
Zoom.
(The default setting is 1X.)
4.5
Alarm
1.
Press the
M
button and the menu bar will pop up.
2.
Press the
<
LEFT button or
>
RIGHT button until is highlighted.
3.
Press the
+
UP button or
-
DOWN button to select the alarm time (
6h
,
4h
,
2h
). (The default setting is Alarm OFF.)
4.
If an alarm time is selected, the parent unit will beep for about 45 seconds after every 6, 4 or 2 hour period.
Parent Unit Menu Options
4.6
Camera Control
4.6.1
Add (pair) a camera
1.
Press the
M
button and the menu bar will pop up.
2.
Press the
<
LEFT button or
>
RIGHT button until is highlighted, and the
del/add/view/scan
menu will pop up.
3.
Press the
+
UP button or
-
DOWN button to select
add
, and press the OK
4.
button to confirm.
cam 1
/
cam 2
/
cam 3
/
cam 4
will pop up, press the
+
UP button or
-
DOWN button to select the desired CAM, and press the OK button to start searching for a camera unit. The green audio level LED will flash rapidly while searching.
5.
Press and hold the PAIR button underneath the baby unit until the parent unit finds the camera, beeps and the picture from the camera appears.
NOTE
A camera can only be registered to one parent unit at any one time.
4.6.2
View a camera
1.
Press the
M
button and the menu bar will pop up.
2.
Press the
<
LEFT button or
>
RIGHT button until is highlighted and the
del/add/view/scan
menu pops up.
3.
Press the
+
UP button or
-
DOWN button to select
view
, and press the OK
4.
button to confirm.
cam 1
/
cam 2
/
cam 3
/
cam 4
will pop up, press the
+
UP button or
-
DOWN button to select desired CAM, and press the OK button to view the picture from that camera.
TIP
Quick Method to View Cameras instead of entering into the menu bar.
Directly press OK repeatedly to select
cam 1
,
cam 2
,
cam 3
,
cam 4
,
scan
.
4.6.3
View multi-cameras on screen
1.
Press the
M
button and the menu bar will pop up.
2.
Press the
<
LEFT button or
>
RIGHT button until icon is highlighted.
3.
Press the
+
UP button or
-
DOWN button to select 4-split screen On/Off.
Parent Unit Menu Options 15
4.6.4
Delete a camera
1.
Press the
M
button and the menu bar will pop up.
2.
Press the
<
LEFT button or
>
RIGHT button until is highlighted, and the
del/add/view/scan
menu will pop up.
3.
Press the
+
UP button or
-
DOWN button to select
del
, and press the OK
4.
button to confirm.
cam 1
/
cam 2
/
cam 3
/
cam 4
will pop up, press the
+
UP button or
-
DOWN button to select the desired CAM, and press the OK button to delete that registration.
Note:
You are not allowed to delete the camera if there is only one registered camera in the system.
4.6.5
Scan camera
1.
Press the
M
button and the menu bar will pop up.
2.
Press the
<
LEFT button or
>
RIGHT button until is highlighted, and the
del/add/view/scan
menu will pop up.
3.
Press the
+
UP button or
-
DOWN button to select
scan
, and press the OK button to confirm.
4.
The screen will then display images from different registered cameras in a loop of
cam 1
/
cam 2
/
cam 3
/
cam 4
, changing about every 12 seconds.
TIP
Quick Method to View Cameras instead of entering into the menu bar.
Directly press OK repeatedly to select
cam 1
,
cam 2
,
cam 3
,
cam 4
,
scan
.
4.7
Temperature
1.
Press the
2.
Press the
3.
Press the
M
button and the menu bar will pop up.
<
LEFT button or
>
RIGHT button until is highlighted.
+
UP button or
-
DOWN button to select °C or °F.
4.8
Power Saving mode
1.
Press the
2.
Press the
3.
Press the
M
button and the menu bar will pop up.
<
LEFT button or
>
RIGHT button until
V
is highlighted.
+
UP button or
-
DOWN button to select auto video off after
5 mins, 30 mins or 60 mins if not in charging.
16 Parent Unit Menu Options
5. Disposal of The Device (environment)
At the end of the product lifecycle, you should not dispose of this product with normal household waste. Take this product to a collection point for the recycling of electrical and electronic equipment. The symbol on the product, user's guide and/or box indicates this.
Some of the product materials can be reused if you take them to a recycling point. By reusing some parts or raw materials from used products you make an important contribution to the protection of the environment.
Please contact your local authorities in case you need more information on the collection points in your area.
Dispose of the battery pack in an environmentally-friendly manner according to your local regulations.
Disposal of The Device (environment) 17
18
6. Cleaning
Clean the baby monitor with a slightly damp cloth or with an anti-static cloth.
Never use cleaning agents or abrasive solvents.
Cleaning and care
• Do not clean any part of the product with thinners or other solvents and chemicals –- this may cause permanent damage to the product which is not covered by the warranty.
• Keep your baby monitor away from hot, humid areas or strong sunlight, and don't let it get wet.
• Every effort has been made to ensure high standards of reliability for your baby monitor. However, if something does go wrong, please do not try to repair it yourself –- contact Customer Service for assistance.
Cleaning
7. Help
Display
No display
• Try recharging or replacing the battery pack.
• Reset the units. Disconnect the battery pack of the parent unit and unplug both the units' electrical power, then plug them back in.
• Is the unit turned on?
Press and hold the ON/OFF button
P
on the parent unit to turn it ON.
• Is the correct camera selected?
Change the camera number, if necessary.
• Is the video display turned on?
Press the VIDEO ON/OFF button
V
to turn it on.
• When operating using batteries only, the Display will go blank after
5 minutes or 30 minutes or 60 minutes to save power (depending on video on setting). The unit is still active and will give you audio alerts. You can reactivate the screen by pressing any button.
Registration
If the Baby Unit has lost its link with the Parent Unit
• Try recharging or replacing the battery pack.
• If the Baby Unit is too far away it may be going out of range, so move the
Baby Unit closer to the Parent Unit.
• Reset the units by disconnecting them from the battery and electrical power.
Wait about 15 seconds before reconnecting. Allow up to one minute for the
Baby Unit and the Parent Unit to synchronise.
• See 2.4 Registration (Pairing), if there is a need to re-register the units.
Help 19
Interference
Noise interference on your parent unit
• Your baby and parent units may be too close. Move them farther apart.
• Make sure there is at least 3 to 6 feet between the
2 units to avoid audio feedback.
• lf the baby unit is too far away it may be out of range, so move the baby unit closer to the parent unit.
• Make sure the baby and parent units are not near other electrical equipment, such as a television, computer or cordless/mobile telephone.
• Use of other 2.4 GHz products, such as wireless networks (Wi-Fi
®
routers),
Bluetooth
®
systems, or microwave ovens, may cause interference with this product, so keep the baby monitor away at least 5ft (1.5m) from these types of products, or turn them off if they appear to be causing interference.
• If the signal is weak, try moving the Parent and/or Baby Unit to different positions in the rooms.
20 Help
8. General Information
lf your product is not working properly....
1.
Read this User's Guide or the Quick Start Guide.
2.
Contact Customer Service:
US and Canada 1-888-331-3383
Email: [email protected]
To order a replacement battery pack, contact customer service.
Consumer Products and Accessories Limited Warranty
("Warranty")
Thank you for purchasing this Motorola branded product manufactured under license by Binatone Electronics International LTD ("BINATONE").
What Does this Warranty Cover?
Subject to the exclusions contained below, BINATONE warrants that this
Motorola branded product ("Product") or certified accessory ("Accessory") sold for use with this product that it manufactured to be free from defects in materials and workmanship under normal consumer usage for the period outlined below.
This Warranty is your exclusive warranty and is not transferable.
Who is covered?
This Warranty extends only to the first consumer purchaser, and is not transferable.
What will BINATONE do?
BINATONE or its authorized distributor at its option and within a commercially reasonable time, will at no charge repair or replace any Products or Accessories that does not conform to this Warranty. We may use functionally equivalent reconditioned/ refurbished/ pre-owned or new Products, Accessories or parts.
What Other Limitations Are There?
ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE
General Information 21
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF THIS
LIMITED WARRANTY, OTHERWISE THE REPAIR OR REPLACEMENT
PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE
REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED. IN NO EVENT SHALL MOTOROLA OR
BINATONE BE LIABLE, WHETHER IN CONTRACT OR TORT (INCLUDING
NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF
THE PRODUCT OR ACCESSORY, OR FOR ANY INDIRECT, INCIDENTAL,
SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF
REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR
OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE
ABILITY OR INABILITY TO USE THE PRODUCTS OR ACCESSORIES TO THE
FULL EXTENT THESE DAMAGES MAY BE DISCLAIMED BY LAW.
Some jurisdictions do not allow the limitation or exclusion of incidental or consequential damages, or limitation on the length of an implied warranty, so the above limitations or exclusions may not apply to you. This Warranty gives you specific legal rights, and you may also have other rights that vary from one jurisdiction to another.
22 General Information
Products Covered
Consumer Products
Length of Coverage
One (1) year from the date of the products original purchase by the first consumer purchaser of the product.
Consumer Accessories Ninety (90) days from the date of the accessories original purchase by the first consumer purchaser of the product.
Consumer Products and Accessories that are Repaired or Replaced
The balance of the original warranty or
for Ninety (90) days from the date returned to the consumer, whichever is longer.
Exclusions
Normal Wear and Tear. Periodic maintenance, repair and replacement of parts due to normal wear and tear are excluded from coverage.
Batteries. Only batteries whose fully charged capacity falls below 80% of their rated capacity and batteries that leak are covered by this Warranty.
Abuse & Misuse. Defects or damage that result from: (a) improper operation, storage, misuse or abuse, accident or neglect, such as physical damage (cracks, scratches, etc.) to the surface of the product resulting from misuse; (b) contact with liquid, water, rain, extreme humidity or heavy perspiration, sand, dirt or the like, extreme heat, or food; (c) use of the Products or Accessories for commercial purposes or subjecting the Product or Accessory to abnormal usage or conditions; or (d) other acts which are not the fault of MOTOROLA or
BINATONE, are excluded from coverage.
Use of Non-Motorola branded Products and Accessories. Defects or damage that result from the use of Non-Motorola branded or certified Products or
Accessories or other peripheral equipment are excluded from coverage.
General Information 23
Unauthorized Service or Modification. Defects or damages resulting from service, testing, adjustment, installation, maintenance, alteration, or modification in any way by someone other than MOTOROLA, BINATONE or its authorized service centres, are excluded from coverage.
Altered Products. Products or Accessories with (a) serial numbers or date tags that have been removed, altered or obliterated; (b) broken seals or that show evidence of tampering; (c) mismatched board serial numbers; or (d) nonconforming or non-Motorola branded housings, or parts, are excluded from coverage.
Communication Services. Defects, damages, or the failure of Products or
Accessories due to any communication service or signal you may subscribe to or use with the Products or Accessories is excluded from coverage.
How to Obtain Warranty Service or Other Information?
To obtain service or information, please call:
US and Canada 1-888-331-3383
Email: [email protected]
You will receive instructions on how to ship the Products or Accessories at your expense and risk, to a BINATONE Authorized Repair Centre.
To obtain service, you must include: (a) the Product or Accessory; (b) the original proof of purchase (receipt) which includes the date, place and seller of the Product; (c) if a warranty card was included in your box, a completed warranty card showing the serial number of the Product; (d) a written description of the problem; and, most importantly; (e) your address and telephone number.
These terms and conditions constitute the complete warranty agreement between you and BINATONE regarding the Products or Accessories purchased by you, and supersede any prior agreement or representations, including representations made in any literature publications or promotional materials issued by BINATONE or representations made by any agent, employee or staff of BINATONE, that may have been made in connection with the said purchase.
24 General Information
FCC and IC regulations
FCC Part l5
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the Federal Communications
Commission (FCC) rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Privacy of communications may not be ensured when using this device.
To ensure safety of users, the FCC has established criteria for the amount of radio frequency energy that can be safely absorbed by a user or bystander according to the intended usage of the product. This product has been tested and found to comply with the FCC criteria. The Baby Unit shall be installed and used such that parts of the user’s body other than the hands are maintained at a distance of approximately 8 inches (20 cm) or more.
This Class B digital apparatus complies with Canadian ICES-003.
CAN ICES-3(B)/NMB-3(B)
General Information 25
WARNING
Changes or modifications, to this equipment not expressively approved by the party responsible for compliance could void the user’s authority to operate the equipment.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
Industry Canada
This device complies with Industry Canada licence-exempt RSS standard(s):
Operation is subject to the following Two conditions:(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
The term "IC: " before the certification/registration number only signifies that the Industry Canada technical specifications were met. This product meets the applicable Industry Canada technical specifications.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
26 General Information
Technical Specifications
Baby unit (Model: MBP36SBU)
Frequency
Image sensor
Lens
IR LED
Power
2.4 GHz to 2.48 GHz color CMOS 0.3M Pixels f 2.5mm, F 2.8
8 pcs
Adapter: Ten Pao International Ltd.
S006MU0500100; Input: 100-240V,
50/60HZ 300mA; Output: 5.0V, 1000mA
OR
Adapter: Kuantech Incorporated Company
KSAS0050500100VUD; Input: 100-240V,
50/60Hz 300mA; Output: 5.0V, 1000mA
WARNING
Use only with supplied power supply.
General Information 27
Parent unit (Model: MBP36SPU)
Frequency
Display
Display colors
Brightness control
Volume control
Power
2.4 GHz to 2.48 GHz
3.5" diagonal TFT LCD
16.7M color LCD
8 steps
8 steps
Adapter: Ten Pao International Ltd.
S003IU0500060; Input: 100-240V,
50/60Hz 150mA; Output: 5.0V, 600mA
OR
Adapter: ShenZhen Frecom Electronic Co., LTD
F05W-050060SPAU
Input: 100-240V, 50/60Hz 150mA; Output: 5.0V,
600mA
WARNING
Use only with provided power supply.
Battery: GPI GPRHCH93C021 Ni-MH AAA 3.6V
900mAh rechargeable battery pack
OR
JUSTHIGH Ni-MH AAA 3.6V 900mAh rechargeable battery pack
WARNING
Do not use non-rechargeable batteries for the Parent
Unit. Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.
28 General Information
Manufactured, distributed or sold by
Binatone Electronics International LTD., official licensee for this product.
MOTOROLA and the Stylized M Logo, are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and are used under license. All other trademarks are the property of their respective owners.
© 2014 Motorola Mobility LLC.
All rights reserved.
Version 13.0
Printed in China
