advertisement
▼
Scroll to page 2
® HEAT RECOVERY VENTILATOR VÄNEE VIGÖR™ HRV Part no. 44200 35 to 70 CFM (0.4 in. w.g.) Controls This unit is very simple to operate: once it is installed, use its push button, located on the unit top left side, to control it. Also, up to 5 of the following auxiliary wall controls can be added: - 20-min. lighted push button no. 1806110 - 60-min. crank timer no. 00910 - Humidity Control no. 200694 Options Complete line of registers and diffusers Exclusive wall mounting bracket no. 19255 VB0142 THE VIGÖR™ HRV: PUNY PRICE TAG, LOTS TO LOVE! The Vigör™ HRV is the ideal choice for condominiums, apartments and other limited space applications that require up to 70 cfm of continuous ventilation. With its compact size and 4-inch vertical ports, it can be installed in small spaces such as a closet or mechanical room above a hot water tank. At just 30 lb (13.6 kg), it can be installed without opening the unit Features integrated hooks to simplify installation Removable terminal block to ease auxiliary wall control connections Less than 4 sones at 64 cfm REPAIRS AND MAINTENANCE Defrosting System The Vigör™ HRV defrosts on a fixed cycle of 25 minutes air exchange and 5 minutes defrost, independent of the outside temperature. Heat Recovery Core Dimensions: 10" x 10" x 5.5" (25.4 cm x 25.4 cm x 14 cm) Exchange surface: 42.3 ft² (3.9 m²) Weight: 4 lb (1.8 kg) Material: Polypropylene Type: Crossflow Warranty: Limited Lifetime All parts of the Vigör™ HRV that could need maintenance can be removed in less than five minutes, allowing direct access for easy repairs. The PSC motor is permanently lubricated. WARRANTY The Vigör™ HRV is protected by a 2-year warranty on parts only. The heat recovery core is covered by a limited lifetime warranty, with the original proof of purchase. Requirements and Standards Available at: Complies with the UL 1812 requirements regulating the installation of Heat Recovery Ventilators Complies with the CSA C22.2 no. 113 Standard applicable to ventilators Complies with CSA C444 requirements regulating the installation of Heat Recovery Ventilators Technical data was obtained from published results of tests relating to CSA C439 Standards HVI certified Dimensions: Vigör™ HRV Ventilation Performance EXT. STATIC PRESSURE PA IN. W.G. 25 0.1 50 0.2 75 0.3 100 0.4 125 0.5 150 0.6 175 0.7 200 0.8 225 0.9 1: FRESH AIR TO BUILDING PORT 2: EXHAUST AIR FROM BUILDING PORT 3: FRESH AIR FROM OUTSIDE PORT 4: EXHAUST AIR TO OUTSIDE PORT 1 2 15 7/16” 3 NET SUPPLY AIR FLOW M³/H L/S CFM 39 82 139 37 78 133 35 73 124 33 71 121 31 66 112 30 63 107 28 59 100 25 54 92 23 49 83 L/ S 39 38 35 34 32 30 28 26 24 GROSS SUPPLY CFM M³/H 83 141 80 136 74 126 72 122 67 114 64 109 60 102 55 93 50 85 AIR FLOW EXHAUST L/ S CFM M³/H 43 40 39 37 35 33 31 28 26 90 86 82 78 73 71 65 60 55 153 146 139 133 124 121 110 102 93 4 3 FT. POWER CORD Ø 4” TYP. Energy Performance 2 3 /8 ” POWER SUPPLY SENSIBLE APPARENT LATENT RECOVERY/ NET AIR FLOW CONSUMED RECOVERY SENSIBLE MOISTURE TEMPERATURE ºC ºF L /S CFM M³/H WATTS EFFICIENCY EFFECTIVENESS TRANSFER HEATING 0 32 17 36 61 40 55 70 0.01 54 48 59 0.02 0 32 31 65 110 -25 -13 18 38 65 41 53 72 0.01 COOLING TOTAL RECOVERY EFFICIENCY 35 95 - - 18 5/8” 16 5/16” 15 1/16” VK0074A 15 5/8” NOTE: All specifications are subject to change without notice. Specifications and Ratings Model: Vigör™ HRV Part Number: 44200 Total Assembled Weight (including polypropylene core): 30 lb (13.6 kg) Round 4" ducts Drain: 1/2" (1.2 cm) fittings with 10 ft (3 m) PVC drain Core filters: 2 washable Merv 6 9.2" x 14.25" x 3.8" (23.4 cm x 36.2 cm x 9.6 cm) PROJECT: LOCATION: MODEL Housing: Pre-painted steel Insulation: Expanded polystyrene Mounting: Suspension by chains and springs or optional wall bracket Supply & 1 motor Exhaust Blower Motor: - Protection type: Thermally protected - Insulation class: B Speed Control on unit: Low speed and Standby Other modes available with auxiliary wall controls Heat Recovery Core: - Heat Exchange Surface Area: 42.3 ft² (3.9 m²) - Type: Crossflow - Material: Polypropylene Unit Electrical Characteristics: Volts Frequency Ampere Watts 120 60 Hz 0.5 60 REMARKS NO.: QTY.: SUBMITTED BY: DATE: ® Residential Product Group, 550 Lemire Blvd., Drummondville, QC, Canada J2C 7W9 - Tel.: 1-800-567-3855 Fax: 1-800-567-1715 www.vanee-ventilation.com VigorHRVd110511
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement