I850 - SOUTHERNLINC | User's Guide | Motorola I850

SouthernLINC Wireless iDEN

Digital Multi-service Data-capable Phone

i850 Phone User’s Guide

@NNTN6255@

NNTN6255A

IMPORTANT NOTICE: PLEASE READ

PRIOR TO USING YOUR PHONE

The SIM card provided in this kit is intended for use with the phone provided in this package.

Loss of certain features will result when using a SIM card from one of the following models: i30sx, i35s,

i50sx, i55sr, i58s, i60c, i80s, i85s, i88s, i90c, i95cl

series, and the i2000 series.

For more information on SIM card compatibility, go to www.motorola.com/iden/support.

Defects or damage to your Motorola phone that result from the use of non-Motorola branded or certified

Accessories, including but not limited to replacement housings and or other peripheral accessories, are excluded from warranty coverage. Please refer to the text of Motorola's Limited One Year warranty located in this user’s guide for complete details.

Contents

Getting Started........................................... 1

Locating Your SIM Card ....................................3

Battery ...............................................................3

Activating Service..............................................6

Powering On and Off.........................................6

Enabling Over-the-Air Security..........................7

Finding Your Phone Number and LINC ID ........8

Phone Basics ....................................................8

SIM Card Security ...........................................12

Antenna ...........................................................17

Accessories .....................................................17

For More Information.......................................17

Making Calls ............................................. 18

Phone Calls .....................................................18

InstantLINC Mobile to Mobile Calls .................18

Receiving Calls................................................19

Choosing a Number to Call .............................20

Missed Phone Calls.........................................21

Using Speakerphone.......................................21

Using Mute ......................................................22

Making Emergency Phone Calls .....................22

LINCaround

SM

...........................................23

Channels and Codes.......................................24

Private LINCaround Calls................................26

Making Emergency Calls while in LINCaround

SM

Mode...........................................................27

Setup Options .................................................27

Call Alerts..................................................29

Sending Call Alerts..........................................29

Receiving Call Alerts .......................................29

Using the Call Alert Queue..............................29

Recent Calls ..............................................31

Calls and Call Alerts ........................................31

My Info From Other Phones ............................31

Contact Information From Other Phones ........32

Viewing the Recent Calls List..........................32

Storing Items to Contacts ................................33

Deleting Items .................................................33

Making Calls From the Recent Calls List ........34

i

Contacts ................................................... 36

Accessing Contacts.........................................37

Creating Entries...............................................37

Storing Numbers Faster ..................................39

Editing Entries .................................................39

Viewing Entries................................................40

Deleting Entries ...............................................42

Checking Capacity ..........................................42

Creating Pauses and Waits.............................42

International Numbers .....................................43

Making Calls From Contacts ...........................43

Accessing Contacts with GSM Phones ...........44

Call Forwarding........................................ 45

Forwarding All Calls ........................................45

Turning Off Call Forwarding ............................46

Forwarding Missed Calls .................................46

Viewing Call Forwarding Settings....................47

Advanced Calling Features..................... 48

Call Waiting .....................................................48

Switching Between Calls .................................48

Putting a Call on Hold......................................49

ii

Calling 2 People ..............................................49

Creating Pauses and Waits While Dialing.......50

Making International Calls ...............................50

One Touch PTT...............................................50

Setting Flip Actions .........................................51

Group Calls .....................................................51

Call Timers ......................................................52

Using Your Phone as a Modem ......................53

Making TTY Calls ............................................54

Memo .........................................................57

Ring Tones ................................................58

Setting Your Phone to Vibrate.........................58

Ring and Vibrate .............................................59

Assigning Ring Tones to Contacts ..................59

Viewing Ring Tone Assignments ....................59

Downloading More Ring Tones .......................60

About DRM Ring Tones ..................................60

Managing Memory ..........................................60

Deleting Custom Ring Tones ..........................60

Entering Text............................................ 62

Using Word Mode............................................62

Special Function Keys.....................................63

Messages ................................................. 65

Message Notifications .....................................65

Message Center ..............................................66

Voice Mail Messages ............................... 67

Receiving a Message ......................................67

Accessing Voice Mail from the Message Center ...................................67

Sending Unanswered Calls to Voice Mail .......67

Text Messaging........................................ 68

Setting Up........................................................68

Receiving a Message ......................................68

Reading from the Message Center .................69

Creating and Sending Messages ....................69

Sorting Messages............................................72

Managing Memory...........................................72

Camera ..................................................... 73

Accessing the Camera ....................................73

Taking Pictures ...............................................73

More Actions for Captured Pictures ................75

Accessing the Media Center ...........................76

Customizing the Camera.................................76

Managing Memory ..........................................76

Media Center .............................................78

Viewing the Media Center ...............................78

Forward Locked Items.....................................79

DRM Items ......................................................80

Pictures ...........................................................80

Audio Recordings ............................................81

Renaming Items ..............................................82

Locking Items ..................................................82

Deleting Items .................................................83

Accessing the Camera ....................................83

Managing Memory ..........................................83

Digital Rights Management .....................84

Installing Items ................................................84

Understanding DRM Status Icons ...................84

Sharing Items ..................................................84

Managing DRM Items .....................................85

iii

Using LINC View ...................................... 88

Sending a Picture ............................................88

Receiving a Picture .........................................89

Sending My Info and Contact Information .......90

My Info ...................................................... 93

Viewing My Info ...............................................93

Editing My Info.................................................93

Setting Sending Options..................................94

Datebook .................................................. 95

Viewing Datebook ...........................................95

Creating Events...............................................96

Editing Events .................................................98

Deleting Events ...............................................98

Receiving Reminders ......................................99

Making Calls From Datebook and Datebook

Reminders ..................................................99

Customizing Datebook Setup........................100

Java Applications .................................. 102

Installing Applications....................................102

Running Applications.....................................102

Suspending Applications ...............................102

iv

Resuming Applications..................................103

Ending Applications.......................................103

Downloading Applications .............................103

Deleting Applications.....................................104

Managing Memory ........................................104

Shortcuts on the Main Menu .........................104

Java Applications and GPS Enabled ............105

GPS Enabled...........................................108

IMPORTANT: Things to Keep in Mind ..........108

Making an Emergency Call ...........................110

Viewing Your Approximate Location .............111

Enhancing GPS Performance .......................112

Setting Privacy Options .................................113

Using GPS with Map Software ......................114

Voice Records ........................................117

Viewing Voice Records .................................117

Creating Voice Records ................................117

Playing Voice Records ..................................118

Labeling Voice Records ................................118

Locking Voice Records .................................118

Deleting Voice Records.................................119

Managing Memory.........................................119

Customizing Your Phone ...................... 120

Setting the Volume ........................................120

Setting Your Phone to Vibrate.......................120

Changing the Look of Your Phone ................120

Airplane Mode—Temporarily Turning Off

Calls..........................................................122

Using Settings ...............................................122

Profiles ................................................... 127

Viewing Profiles.............................................127

Switching Profiles ..........................................127

How Changing Settings Affects Profiles........127

Temporary Profiles ........................................128

Creating Profiles............................................129

Editing Profiles ..............................................129

Deleting Profiles ............................................129

Setting Call Filtering ......................................130

Shortcuts ................................................ 132

Creating a Shortcut .......................................132

Using a Shortcut............................................132

Editing a Shortcut ..........................................133

Deleting Shortcuts .........................................133

Using a Headset .....................................134

Attaching a Headset......................................134

Using a Remote PTT Button .........................134

Understanding Status Messages ..........135

Safety and General Information ............137

RF Operational Characteristics .....................137

Portable Radio Product Operation and EME

Exposure...................................................137

Electromagnetic Interference/Compatibility...140

Medical Devices ............................................140

Operational Warnings ...................................141

Operational Cautions ....................................142

Accessory Safety Information .......................143

v

Hearing Aid Compatibility ..................... 145

MOTOROLA LIMITED WARRANTY ...... 147

Patent and Trademark Information ...... 151

Index ....................................................... 152

Driving Safety Tips ................................ 158

vi

DECLARATION OF CONFORMITY

Per FCC CFR 47 Part 2 Section 2.1077(a)

Responsible Party Name: Motorola, Inc.

Address: 8000 West Sunrise Boulevard

Plantation, FL 33322 USA

Phone Number: 1 (800) 453-0920

Hereby declares that the product:

Product Name: i850

Model Number: H65XAN6RR4AN

Conforms to the following regulations:

FCC Part 15, subpart B, section 15.107(a),

15.107(d) and section 15.109(a)

Class B Digital Device

As a personal computer peripheral, this device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to part 15 of the

FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

vii

viii

Getting Started

retractable antenna camera lens volume controls

Push-To-Talk

(PTT) button audio jack mirror speaker

(in back) power button p c light sensor camera key microphone accessory connector

1

Getting Started c c

Camera key — accesses camera; captures picture.

Navigation key — press the arrows to scroll through menus and lists.

O OK key — selects highlighted item; answers calls.

m

Menu key — accesses context-sensitive menus.

A Option key — selects the option appearing above it on the display.

s

Send key — places phone calls.

e

End key — ends phone calls; returns to idle screen.

t Acts like s when the flip is closed; turns speaker on; used with voice names and voice records.

.

Acts like e

when the flip is closed; accesses recent calls; sends incoming calls to voice mail.

To start using your i850 phone:

• Make sure your SIM card is in place.

• Charge the battery.

• Activate your service.

• Enable over-the-air security if you are prompted to.

2

Locating Your SIM Card

Your SIM (Subscriber Identity Module) card is a small piece of plastic located in the SIM card holder in the back of your phone, underneath the battery.

Locating Your SIM Card

If there is no SIM card in your phone or the box, contact SouthernLINC Wireless at

1-800-406-0151.

Battery

Removing the Battery Door

1 Make sure the phone is powered off. See

“Powering On and Off” on page 6.

2 Slide the release button back until it releases the battery door.

SIM card

If your SIM card is not in the SIM card holder, it may be in the box your phone came in, attached to a piece of plastic about the size of a credit card. If this is the case, carefully detach your SIM card from the surrounding plastic and insert it as

described in “Inserting Your SIM Card” on page 14.

release button

3

Getting Started

3 Allow the battery door to pop up, slide it forward, and remove it from the back of your phone.

3 Replace the battery door and press it gently until you hear a click.

Inserting the Battery

Your phone comes with a High Performance

Lithium Ion Battery.

1 Remove the battery door.

2 Insert the battery into the battery area. Press the battery down to secure it.

Charging the Battery

Your phone comes with a rapid travel charger.

1 Plug the charger into an electrical outlet.

2 Open the connector cover.

connector cover

4

3 Plug the other end of the charger into the accessory connector.

Charger Attached or Device Attached appears on the internal display.

Tip: To remove the charger from the accessory connector: Press the buttons on the sides of the plug. Pull the plug straight out.

4 If you have purchased optional batteries or

chargers, see “Charging Times”.

Battery

Charging Times

See your battery and charger to determine the appropriate charging time.

Battery Charger

Maximum

Capacity

Rapid

High

Performance

2 hours

3.5 hours

Standard

4 hours

7.5 hours

For best results, charge the batteries within the temperature range of 50°F to 104°F (10°C to

40°C).

Prolonged charging is not recommended.

5


Removing the Battery

1 With the phone powered off, remove the battery door.

2 Remove the battery by pushing it toward the antenna and lifting it out.

Battery Use and Maintenance

• The Motorola iDEN Approved Lithium Ion chargers provide optimum performance. Other chargers may not fully charge the iDEN Lithium

Ion battery or may yield a reduced number of lifetime charge cycles.

• Extreme temperatures degrade battery performance. Do not store the battery where temperatures exceed 140°F (60°C) or fall below

4°F (-20°C).

• Lithium Ion batteries have a self discharge rate and without use, lose about 1% of their charge per day.

• The battery capacity is degraded if the battery is stored for long periods while fully charged. If long term storage is required, store at half capacity.

Activating Service

The first time you power on your phone, you must be in your local calling area. This activates your service.

Powering On and Off

The first time you power your phone on, a screen may appear asking you to update your browser information. This means you must enable security.

To power your phone on:

1 Open the flip.

2 Press p

.

Note: When powering on, if you press p

for more than 5 seconds, you will turn on

Airplane mode. See “Airplane Mode—

Temporarily Turning Off Calls” on page

122.

6

To power your phone off:

1 Open the flip.

2 Press and hold p

.

When You Power On For the First

Time

If the Enter SIM PIN Code screen appears, enter

your SIM PIN. See “Entering the PIN” on page 12.

Press

A

under Ok.

When you receive your phone, the SIM PIN is

0000. Change your PIN to prevent fraudulent use

of the SIM card (see “Changing the PIN” on page

13).

Enabling Over-the-Air Security

As your phone connects to the network, you will see a welcome message and a connecting message. When the idle screen appears, the phone is ready to use.

Enabling Over-the-Air

Security

If you are set up to receive over-the-air programming from SouthernLINC Wireless, you must enable security the first time you power on your phone or within 10 days of first activation of your phone:

1 When you power on your phone for the first time, after the idle screen appears, you will be prompted to select Ok to update your browser information.

7


Note: If you press

A

under Later, you will be prompted to enable security each time you power on your phone until you press

A

under Ok.

2 Press

A

under Ok.

3 You are prompted to enable security. Press

A under Yes. A series of screens appears. If you subscribe to the appropriate SouthernLINC

Wireless plan, your home page appears.

4 Press e

to return to the idle screen.

Finding Your Phone Number and LINC ID

My Info lets you view your phone number, LINC ID, and other phone information:

1 Press m

to access the main menu.

2 Scroll to My Info.

3 Press

O

.

4 Scroll to see your information.

Line 1 and Line 2 are your phone numbers. LINC

ID is the number that others use to contact you using InstantLINC Mobile to Mobile. These numbers appear when you receive your alert notification after enabling security on your phone.

See “My Info” on page 93 for more information

about this feature.

8

Phone Basics

Any time your phone is powered on, the display provides you with information and options.

The external display shows a shortened version of the internal display. To see more information, open the flip.

status icons text area menu icon display options

The screen shown is the idle screen. The idle screen appears when your phone is on, but not engaged in any activity.

Text Area

This area displays menus, messages, names, phone numbers, and other information.

Display Options

Two display options appear at the bottom of most screens. You select a display option by pressing the option key below it.

Menus and Lists

Your phone’s features are arranged in menus, submenus, and lists.

To access the items in a menu or list, scroll using the navigation key at the top of your keypad. This key lets you scroll up, down, left, or right. Holding down the appropriate part of the navigation key speeds up scrolling.

In this guide, this symbol > tells you to select a menu or list item. For example, Settings >

Security means:

1 Scroll to Settings on the main menu.

2 Press

O

to see the Settings screen.

3 Scroll to Security.

4 Press

O

to see the Security screen.

OK Key

Pressing

O

:

• Selects the highlighted menu item or list item

• Sets options

Phone Basics

• Confirms actions

• Places and answer calls

Menu Key

Many features provide context-sensitive menus that let you access related features and actions.

This icon

S

appears any time a context-sensitive menu is available. Press m to access the menu.

Main Menu

All your phone’s features can be accessed through the main menu. You can set the main menu to appear as a list or as large icons. a

Browser Browse the Web.

q

Java Apps Java applications on your

phone. See page 102.

b

Settings Customize your phone.

See page 120.

c

VoiceRecord Record and play audio

messages. See page 117.

d

Contacts Create, view, store, and edit Contacts. See

page 36.

9

Getting Started e

Messages Access messages. See

page 65.

f

Call Forward Set call forwarding options.

See page 45.

o

Datebook Schedule appointments.

See page 95.

g

Memo Store a number to access

later. See page 57.

h

Call Timers i

Recent Calls Lists recent calls. See

page 31.

s

Shortcuts Create shortcuts to

screens. See page 132.

j

My Info

Phone usage information.

See page 52.

View personal phone information, including phone number and LINC

ID. See page 8.

p

Profiles Groups of settings you apply together. See

page 127.

k

Call Alert Lists call alerts. See

page 29.

l m

GPS

Ring Tones

M

LINCaround

C

Camera m

Media Center

Find your approximate geographical location. See

page 108.

Assign ring tones and turn

ringer off. See page 58.

Launch/Exit LINCaround.

Access LINCaround Setup

and Help. See page 23.

Access camera and take

pictures. See page 73.

Access stored pictures and audio recordings. See

page 78.

Quick Access to Main Menu Items

Each arrow in the navigation key and

O

can be used to access a main menu item from the idle screen. Each of these keys is assigned to a main menu item when you receive your phone. To

assign different main menu items, see “Personalize

Features” on page 124.

10

Status Icons

Status icons appear at the top of the display. Some appear at all times. Others appear only when your phone is engaged in certain activities or when you have activated certain features.

abcd efgd

Battery Strength — A fuller battery indicates a greater charge.

o

A

B

C

1

M s p q

2 r

Signal Strength — More bars next to the antenna indicate a stronger signal.

Phone In Use — Your phone is active on a phone call.

InstantLINC Mobile to Mobile In

Use — Your phone is active on an

InstantLINC Mobile to Mobile call.

Talkgroup In Use — Your phone is active on a group call.

Active Phone Line — 1 indicates phone line 1 is ready to make calls;

2 indicates phone line 2 is ready to make calls.

LINCaround — Your phone is set to LINCaround mode.

Phone Basics

G J

H K

I L

Call Forward — Your phone is set

to forward calls. See page 45.

Q RM u w xT yz

Ringer Off — Your phone is set to not ring. See page 58.

Speaker Off — Sounds associated with InstantLINC Mobile to Mobile and group calls are set to come through the earpiece rather than through the speaker.

Messages — You have one or

more messages. See page 65.

DE

U

Y Z

Internet — You are ready to browse the internet.

Airplane Mode — Your phone is set to airplane mode. See

page 122.

Packet Data — You are ready to transfer packet data or are transferring packet data. See

page 53.

11


N O t

TTY — You are ready to use your phone to make calls using a

teletypewriter device. See page 54.

Roaming — You are using your phone outside of the SouthernLINC

Wireless network.

Entering Numbers From the Keypad

To enter numbers at the idle screen or any screen that requires you to enter numbers, press the numbers on the keypad.

If you make a mistake:

• To clear a digit, press

A

under Delete.

• To clear all digits, press and hold

A

under

Delete.

• To insert or delete a digit anywhere in the string of digits you have entered, scroll left or right.

• To cancel, press e

.

SIM Card Security

Your SIM card protects your personal information.

The SIM card stores all your Contacts information.

Since this information is stored on your SIM card, not in your phone, you can remove the information by removing your SIM card.

12

Note: Except for making emergency calls, your phone will not function without the SIM card.

To prevent unauthorized use of your phone, your

SIM card may be protected by a PIN that you enter each time the phone is powered on. You can change the PIN or turn off the requirement that it be entered.

Entering the PIN

You may be required to enter a SIM PIN when you first use your phone.

When you receive your phone, the SIM PIN is

0000. Change your PIN to prevent fraudulent use of the SIM card.

Important: If you enter your PIN incorrectly 3 times, your SIM card is blocked. To unblock your SIM card, you must contact

SouthernLINC Wireless at

1-800-406-0151. See “Unblocking the

PIN” on page 13.

1 When the Enter SIM PIN Code screen appears, enter your SIM PIN. An asterisk appears for each character entered.

2 Press

A

under Ok.

Changing the PIN

1 From the main menu, select Settings >

Security > Change Passwords > SIM PIN.

2 At the Enter Old SIM PIN screen, enter the current SIM PIN.

3 Press

A

under Ok.

4 At the Enter New SIM PIN screen, enter the new 4- to 8-digit SIM PIN.

5 Press

A

under Ok.

6 At the Re-enter New SIM PIN screen, re-enter the new SIM PIN to confirm.

7 Press A under Ok.

Turning the PIN Requirement On and

Off

When the SIM PIN requirement is on, you are prompted to enter your PIN each time you turn on your phone.

Note: If a SIM PIN is required, your phone will not function until the SIM PIN is entered, except for making emergency calls.

When the PIN requirement is off, your phone can be used without entering a PIN.

SIM Card Security

Important: When the SIM PIN requirement is off, the personal data on your SIM card is not protected. Anyone can use your phone and access your personal data.


Security > SIM PIN.

2 Select On or Off.

3 Enter the current SIM PIN.

4 Press

A

under Ok.

Unblocking the PIN

If you enter your PIN incorrectly 3 times, your SIM card is blocked. To unblock your SIM card, you must contact SouthernLINC Wireless at

1-800-406-0151 to get a PIN Unblock Code (PUK).

Important: If you unsuccessfully enter the PUK code 10 times, your SIM card is permanently blocked and must be replaced. If this happens, all data is lost. You will get a message to contact

SouthernLINC Wireless. Except for making emergency calls, your phone will not function with a blocked SIM card.

To unblock the PIN:

1 Press

* # m 1

.

13


2 At SouthernLINC Wireless representative’s request, provide the information needed to give you a PUK code.

3 Select Unblock PIN.

4 Enter the PUK code.

5 Enter a new 4- to 8-digit SIM PIN.

6 Re-enter your SIM PIN.

If you entered the codes properly, SIM Unlocked appears on the display.

Inserting and Removing Your SIM

Card

Important: Do not touch the gold-colored areas of your SIM card.

Switching SIM Cards

Moving your SIM card from one phone to another moves all your Contacts information, but erases other information. If you remove your SIM card and use it with another phone, or use another SIM card with your phone, the following information is erased:

• The recent calls list

• Call forwarding settings

• Net alerts

• Text Message drafts, outbox messages, and customized quick notes

• Information stored in Memo

• Pictures and audio recordings in the media center, except those that are forward locked

• 3 most recent GPS Enabled locations

• Voice records

• Voice names

• Datebook events

• Options set using the Personalize menu

Inserting Your SIM Card

1 With your phone powered off, remove the battery door and battery.

2 Slide the latch away from the SIM card holder.

latch

14

3 Open the SIM card holder.

5 Close the SIM card holder.

SIM Card Security

4 Carefully slide your SIM card into the SIM card holder.

6 Slide the latch toward the SIM card holder.

Removing Your SIM Card

Important: To avoid loss or damage, do not remove your SIM card from your phone unless absolutely necessary.

1 With your phone powered off, remove the battery door and battery.

15


2 Slide the latch away from the SIM card holder.

4 Carefully slide your SIM card out of the SIM card holder.

latch

3 Open the SIM card holder.

5 Close the SIM card holder.

6 Slide the latch toward the SIM card holder.

16

Note: Protect your SIM card as you would any delicate object. Store it carefully.

Antenna

The retractable antenna on your i850 phone is designed to be extended during calls.

To extend the antenna, pull gently on the rounded tip until the antenna is fully extended and clicks into position.

When finished with a call, retract the antenna by pushing gently on the rounded tip until the antenna clicks into place.

To optimize your phone’s performance, extend the antenna when you make or receive a call, and avoid touching the antenna with any body part.

Antenna

Important: Failure to fully extend or retract the antenna until the antenna clicks into place causes severely degraded performance, which may result in missed calls, dropped calls, or garbled audio.

Accessories

To order accessories, log on to the SouthernLINC

Wireless website at www.southernlinc.com/store or contact your SouthernLINC Wireless sales representative.

For More Information

If you have questions about your i850 phone, contact your sales representative or SouthernLINC

Wireless at 1-800-406-0151.

17

Making Calls

Your i850 phone makes two types of calls: digital cellular phone calls and InstantLINC Mobile to

Mobile calls. With InstantLINC Mobile to Mobile calls, you use your phone as a long-range, digital walkie-talkie.

Phone Calls

With the Flip Open

1 Enter the number you want to call.

2 To place the call:

Press s

. -or-

If you entered the number from the idle screen, press

O

.

3 To end the call:

Press e

. -or-

Close the flip.

To end a call by closing the flip, you must have the

Flip to End feature turned on (see “Setting Flip

Actions” on page 51).

With the Flip Closed

You can make phone calls with the flip closed using a voice name or the recent calls list to select

the number you want to call. See “Using a Voice

Name” on page 20 and “Making Calls From the

Recent Calls List” on page 34.

To end the call, press .

.

InstantLINC Mobile to Mobile

Calls

1 If the flip is open, enter the LINC ID you want to call. -or-

If the flip is closed, choose the number as you would when making a phone call.

2 Press and hold the PTT button on the side of your phone. Begin talking after your phone emits a chirping sound.

3 Release the PTT button to listen.

4 To end the call:

If the flip is closed, press .

. -or-

Press e

. -or-

Press

A

under Exit. -or-

Close the flip.

18

An InstantLINC Mobile to Mobile call ends automatically if there is no activity on the call for a few seconds.

Tip: To let someone know you want to talk to him or her on an InstantLINC Mobile to

Mobile call, send a call alert. See “Call

Alerts” on page 29.

Receiving Calls

Phone Calls

When you receive a phone call, your phone rings, vibrates, or lights up its backlight.

Answering

If the flip is closed, press t . -or-

Open the flip. -or-

Press s

. -or-

Press

O

. -or-

Press

A

under Yes. -or-

Press any number key.

Receiving Calls

To answer a call by opening the flip, you must have

the Flip to Ans feature turned on (see “Setting Flip

Actions” on page 51). To answer a call by pressing

any number key, you must have the Any Key Ans

feature turned on (see “Phone Calls Features” on page 123).

Sending to Voice Mail


. -or-

Press e

. -or-

Press

A

under No.

Ending


. -or-

Press e

. -or-

Close the flip.

InstantLINC Mobile to Mobile Calls

When you receive an InstantLINC Mobile to Mobile call, your phone emits a chirping sound or vibrates.

Answering

1 Wait for the caller to finish speaking.

2 Press and hold the PTT button on the side of your phone. Begin talking after your phone emits a chirping sound.


19

Making Calls

Ending


. -or-

Press e

. -or-

Press

A

under Exit. -or-

Close the flip.

An InstantLINC Mobile to Mobile call ends automatically if there is no activity on the call for a few seconds.

Choosing a Number to Call

You can choose the number you want to call in many ways:

• Enter the number on the keypad. See “Entering

Numbers From the Keypad” on page 12.

• Say a voice name into your phone. See “Using a

Voice Name”.

• Use Speed Dial or Turbo Dial ® to make a phone

call. See “Using Speed Dial and Turbo Dial ® ” on page 21.

• Redial the last phone number called. See

“Redialing the Last Number” on page 21.

• Select the number from the recent calls list. See

“Making Calls From the Recent Calls List” on page 34.

20

• Select the number from Contacts. See “Making

Calls From Contacts” on page 43.

• Select a number stored in Datebook. See

“Making Calls From Datebook and Datebook

Reminders” on page 99.

• Use One Touch PTT to make an InstantLINC

Mobile to Mobile call. See “One Touch PTT” on page 50.

• Use the number in Memo. See “Memo” on page

57.

• Select the number in a text message you have received. See “Receiving a Message” on page

67.

Using a Voice Name

If you have created a voice name in Contacts for the number you want to call, say the voice name

into your phone to enter the number. See page 38

for information on voice names.

You can use a voice name to enter a number with the flip open or closed.

1 Press and hold t until a prompt appears telling you to say the voice name.

2 Speaking into the microphone, say the voice name assigned to the number you want to call.

Your phone plays the name back to you.

3 If you are making a phone call, the call is placed automatically.

Tip: To stop a phone call from being completed, press .

if the flip is closed or press e .

If you are making an InstantLINC Mobile to

Mobile call, press and hold the PTT button to place the call.

Using Speed Dial and Turbo Dial

®

Each phone number stored in Contacts is assigned a Speed Dial number, which you can use to call that number.

Speed Dial

1 From the idle screen, use the keypad to enter the Speed Dial number assigned to the phone number you want to call.

2 Press # .

3 Press s .

Turbo Dial

From the idle screen, press and hold the Speed

Dial number (1 through 9) assigned to the phone number you want to call.

Redialing the Last Number

Press and hold s

to place a call to the last phone number you called.

Missed Phone Calls

Missed Phone Calls

When you miss a call, this icon

V

and the number of phone calls you have missed appear briefly.


If you want to dismiss the missed call message, press

A

under Back. -or-

If you want to view the missed call on the recent calls list, press

A

under View.


If you want to dismiss the missed call message, press

.

.

If you want to view the missed call on the recent calls list, press

.

twice.

Using Speakerphone

Turning on speakerphone makes incoming sound come out of the phone’s speaker instead of the earpiece. Speakerphone is available whenever you are on an active phone call.


To turn speakerphone on or off:

Press

A

under Speaker. -or-

Press t .

21

Making Calls


When you make a call with the flip closed, speakerphone is always on.

Opening the flip turns speakerphone off.

Using Mute

Muting calls lets you listen to incoming sound without transmitting sound. Mute is available whenever you are on an active call.

To turn mute on:

Press

A

under Mute.

While mute is on, Unmute appears as a display option.

To turn mute off:

Press A under Unmute.

Making Emergency Phone

Calls

Your phone supports emergency calling.

Emergency phone calls can be made even when your SIM card is blocked or not in your phone.

Dial 911 to be connected to an emergency response center. If you are on an active call, you must end it before calling 911.

22

When you make an emergency call, your phone’s

GPS Enabled feature can help emergency service personnel find you, if you are in a location where your phone's GPS antenna has established a clear view of the open sky and your local emergency response center has the equipment to process

location information. See “GPS Enabled” on page

108, and particularly “IMPORTANT: Things to

Keep in Mind” on page 108 and “Making an

Emergency Call” on page 110, for more

information on the limitations of this feature.

Because of the limitations of this feature, always provide your best knowledge of your location to the emergency response center when you make an emergency call.

Important: Emergency calls cannot be placed while the keypad is locked.

Important: If you have not registered on the network, emergency calls cannot be placed while your SIM card is in your phone.

LINCaround

SM

Note: This is an optional feature. Go to www.southernlinc.com/downloads or contact SouthernLINC Wireless at

1-800-406-0151 about its availability for purchase.

LINCaround allows direct two-way phone-to-phone communications between two or more phones equipped for LINCaround. You can make and receive LINCaround calls even when network service is not available. You can talk to anyone on your code and channel within your range.

LINCaround allows you to:

• Use code or private mode operation

• Use up to 10 channels

• Communicate with standalone LINCaround radios

Note: LINCaround is not compatible with older

Family Radio Services products.

The following features and main menu items will not be available while in LINCaround:

• On-network phone calls

• On-network InstantLINC Mobile to Mobile calls

• Data transmission

• Incoming message notification

• Musical ring tones

• GPS

• Call forwarding

• Messages

• Call Timers

• Call alerts

• Voice records

Using LINCaround

To set your phone to LINCaround:

1 From the main menu, scroll to LINCaround and press

O

.

2 Select Go to LINCaround.

Switching to LINCaround Please Wait displays.

After a few seconds, the LINCaround idle screen appears. The channel you are set to appears on the first line of the display. The code you are set to appears on the second line of the display. LA

Ready appears on the third line of the display.

Note: When switching from the network to

LINCaround, the last channel and code that were set appear on the LINCaround idle screen.

23

LINCaround SM

While in LINCaround, this icon

M

appears on the display, indicating that there is no network signal and LINCaround is active.

Exiting LINCaround

To set your phone to network mode when

LINCaround is active:

1 From the LINCaround idle screen, press m

.

2 Scroll to LA Options and press

O

.

3 Select Exit LINCaround.

Tip: You can also exit LINCaround from the

LINCaround idle screen by pressing e

for 3 seconds.

Switching to Network Please Wait displays. After a few seconds, the network idle screen appears.

Talk Range

Phones used in LINCaround mode should be a minimum of 6 feet apart to maximize performance and improve transmission range.

Channels and Codes

Your phone has 10 channels and 15 codes.

Channels are divided into sets of frequencies that allow you to make and receive LINCaround calls.

Other parties may also be talking on the same channel.

Codes help minimize interference from unwanted messages and other disturbances when you are on the same channel as others.

To have a conversation, all parties must be on the same channel and code. For private LINCaround calls, the person you are calling must be in

LINCaround and set to the same channel to receive your call.

Note: When making a code call, all parties that are on your code and channel can hear your conversation.

To set a channel:

1 From the LINCaround idle screen, press

A under Edit.

2 Scroll to Channel.

3 Press

A

under Edit.

4 Select a channel.

5 When you are finished, press

A

under Back to return to the LINCaround idle screen.

To set a code:


A under Edit.

24

2 Scroll to Code.

3 Press

A

under Edit.

4 Select a code.


A


Making and Receiving Code Calls in

LINCaround

To make a code call in LINCaround:

1 Press and hold the PTT button. Transmit appears on the first line of display. Begin speaking after your phone emits the LINCaround tone.


The tone emitted from your phone when using

LINCaround is 4 beeps and sounds different from the standard tone heard with on-network

InstantLINC Mobile to Mobile calls and group calls.

If you receive an error message:

• There may be no parties on your channel or code.

• You are out of range.

When you receive a code call using LINCaround,

Receive appears on the first line of the display.

Channels and Codes

Note: An incoming LINCaround call can be terminated at any time by pressing e

.

Receive All

You can set your phone to receive LINCaround transmissions from any phone that is set to the same channel, regardless of the code (1-15), by setting the code to Receive All. When you receive transmissions with the code set to Receive All, the display changes from Receive All to the code on which the transmission was received.

Tip: You can reply to an incoming call within 6 seconds after hearing the short ending beep by pressing the PTT button.

Note: You cannot initiate a code call when the code is set to Receive All. If you press the PTT button with the code set to

Receive All, you will receive an error message.

To set the code to Receive All:


A under Edit.


3 Press

A

under Edit.

4 Select Receive All.


A


25

LINCaround SM

To reply to a call when the code is set to Receive

All:

Press the PTT button.

Private LINCaround Calls

You can have a private conversation with another person using LINCaround. When on a private

LINCaround call, no other parties can hear your conversation. In order to make a private

LINCaround Call, you must use the valid 10-digit

Personal Telephone Number (PTN) of the person you are calling. The person you are calling must be in LINCaround and set to the same channel to receive your call.

If you receive an error message:

• You may not be using a valid PTN.

• The person that you are trying to reach may not be in LINCaround.

• The person that you are trying to reach is set to a different channel or is out of range.

Private Only

To limit LINCaround to private conversation only, set your code to Pvt Only. In this mode, code calls will be ignored and only private calls can be made or received.

26

Note: You will be required to enter a valid PTN before pressing the PTT button.

To set the code to Pvt Only:


A under Edit.


3 Press

A

under Edit.

4 Select Pvt Only.

Making a Private LINCaround Call

1 Enter the 10-digit PTN of the person you want to call on your channel. -or-

Scroll to a number or name in Contacts. -or-

Scroll to a number in the recent calls list.

2 Press and hold the PTT button. Begin speaking after your phone emits the LINCaround tone.


The number or name of the person you are calling will appear in the first line of the display.

Receiving a Private LINCaround Call

The number or name of the person who initiated the call will appear in the first line of the display.

Note: You can reply within 6 seconds simply by pressing the PTT button.

Ending a Private LINCaround Call

A private LINCaround call will end if there is no communication for 6 seconds.

Note: A private LINCaround call may be interrupted during the 6 second idle time by another code call or private call.

The display will return to the LINCaround idle screen.

Making Emergency Calls while in LINCaround

SM

Mode

If you attempt to make an Emergency 911 call while in LINCaround mode, your phone will automatically exit LINCaround mode and attempt to find a network signal.

If you are out of network coverage your phone will not be able to make an emergency 911 cellular call until you go back into the network coverage area.

You must wait until the phone reconnects to the network before attempting to make an emergency

911 cellular call.

Making Emergency Calls while in LINCaroundSM Mode

Setup Options

LINCaround setup options are available in the LA

Options screen in both network and LINCaround modes.

To access Setup Options in network:

1 From the main menu, select LINCaround.

2 Select Setup.

To access Setup Options in LINCaround:

1 From the main menu, select LA Options.

2 Select Setup.

You can set your phone to:

• Launch directly into LINCaround when you select LINCaround from the main menu.

• Notify you periodically with a tone that you are in

LINCaround.

Using Direct Launch

To set your phone to launch LINCaround when you select LINCaround from the main menu:

1 From the Setup screen, scroll to Direct Launch and press O .

2 Select On.

27

LINCaround SM

Note: If Direct Launch is set to On, you will not see LA Options when you select

LINCaround from the main menu. In order to have access to your setup options,

Direct Launch must be set to Off. Or you can access setup options while in

LINCaround by pressing m

and selecting

LA Options.

To turn off Direct Launch:

1 From the Setup screen, scroll to Direct Launch and press

O

.

2 Select Off.

Your phone now displays LA Options when you select LINCaround from the main menu.

Using State Tone

To set your phone to notify you with a tone that you are in LINCaround:

1 From the Setup screen, scroll to State Tone and press

O

.

2 Select the time frame during which you want to be notified that you are in LINCaround.

For example, if you select 1 hour, you will be notified every hour that you are in LINCaround.

To turn off State Tone:

3 From the Setup screen, scroll to State Tone and press

O

.

4 Select Off.

28

Call Alerts

Sending a call alert lets the recipient know you want to talk to him or her on an InstantLINC Mobile to Mobile call.

When you send a call alert, the recipient’s phone emits a series of beeps, or vibrates, and displays your name or LINC ID.

The recipient can:

• Answer — begin an InstantLINC Mobile to

Mobile call with the sender

• Queue — store the call alert to the call alert queue, which is a list of call alerts

• Clear — dismiss and delete the call alert

Sending Call Alerts

1 Enter the LINC ID you want to send to, as you would when making an InstantLINC Mobile to

Mobile call.

2 Press

A

under Alert. Ready to Alert appears on the display.

3 Press the PTT button until Alert Successful appears on the display.

Note: If the alert is not successful, the person you are trying to reach is on a call or has the phone turned off.

Receiving Call Alerts

When you receive a call alert, you must answer, queue, or clear it. You cannot receive phone calls or InstantLINC Mobile to Mobile calls until you do.

To answer a call alert:

Press the PTT button to make an InstantLINC

Mobile to Mobile call to the sender.

To queue a call alert:

Press

A

under Queue.

To clear a call alert:

Press

O

. -or-

Press

A

under Clear. -or-


.

Note: The recent calls list also stores call alerts you have received. They appear as

InstantLINC Mobile to Mobile calls. Call alerts remain in your recent calls list until you delete them or until they reach the end of the list.

Using the Call Alert Queue

When you queue a call alert, it remains in the call alert queue until you make an InstantLINC Mobile to Mobile call to the sender or delete it.

29

Call Alerts

Viewing Call Alerts

1 From the main menu, select Call Alert.

2 Scroll through the list.

Viewing Date and Time

To view the date and time a call alert was received:


2 Select the call alert you want information on.

Responding to Call Alerts in the

Queue

After you queue a call alert, you can respond to it by making an InstantLINC Mobile to Mobile call to the sender or sending a call alert to the sender.

Making an InstantLINC Mobile to Mobile Call to the Sender


2 Scroll to the call alert you want to respond to.

3 Press the PTT button to begin the call.

This removes the call alert from the queue.

Sending a Call Alert to the Sender


2 Scroll to the call alert you want to respond to.

3 Press

A

under Alert. Ready to Alert appears on the display.

4 Press the PTT button until Alert Successful appears on the display.

Deleting Call Alerts

To delete a call alert from the queue:

1 From the call alert queue, scroll to the call alert you want to delete.

2 Press m

.

3 Select Delete.

4 Press

O

or press

A

under Yes to confirm.

To delete all call alerts from the queue:

1 From the call alert queue, press m

.

2 From the call alert menu, select Delete All.

3 Press

O

or press

A


Sorting Call Alerts

Tip: You must have at least one call alert in the queue to access this feature.

To sort call alerts by the order they were received:


2 Press m

.

3 Select Sort By.

4 Select First on Top or Last on Top.

30

Recent Calls

The recent calls list displays information associated with calls you have made and received and call alerts you have received. It also displays

My Info and contact information sent to you from other phones.

The recent calls list displays up to 20 items.

Calls and Call Alerts

The recent calls list contains the numbers of up to

20 of the most recent calls you have made and received.

If the number of a recent call is stored in Contacts, the following information appears:

• The name assigned to the number

• The picture assigned to the number, if your phone is set to show pictures on the recent calls

list. See “Choosing Picture View or List View” on page 33. Pictures appear for phone calls only.

• The Contacts type icon associated with the number. If the Contacts entry containing the number has more than one number or address stored,

<>

surrounds the Contacts type icon. For

information on Contacts types, see page 36.

The LINC ID Contacts type icon appears when you receive an InstantLINC Mobile to Mobile call or call alert, even if the number is not stored in Contacts.

Call alerts you have received appear as

InstantLINC Mobile to Mobile calls. Like all items in the recent calls list, they remain listed until you delete them or until they reach the end of the list.

For phone calls, an additional icon appears giving information about the call:

X

A call you made.

W

A call you received.

V

A missed call. Missed calls appear on the recent calls list only if you have Caller ID.

When you select a call to view its details, you see information such as the name associated with the call, the number, date, time, and duration of the call.

My Info From Other Phones

The recent calls list displays My Info from other

phones. See “Sending My Info and Contact

Information” on page 90.

31

Recent Calls

This icon j

appears with My Info from other phones on the recent calls list, along with the LINC

ID of the person who sent the information.

When you select My Info from other phones to view its details, you see all the information sent.

If you receive My Info from the same phone more than once, only the most recently sent version appears in the recent calls list.

Contact Information From

Other Phones

The recent calls list displays contact information sent from other phones. This information comes from the other phone’s Contacts list or recent calls

list. See “Sending My Info and Contact Information” on page 90.

This icon d

appears with contact information on the recent calls list.

Contact information in the recent calls list displays:

• The name contained in the contact information

• The Contacts type icon associated with the number or address contained in the contact information. If the item contains more than one number or address stored,

<>

surrounds the

Contacts type icon.

32

The name or LINC ID of the person who sent the contact information appears as a separate item on the recent calls list, above the information sent. If one person sends you more than one item of contact information, all the items appear below the person’s name or LINC ID.

When you select contact information to view its details, you see the name or LINC ID of the person who sent the information and all the information in the item.

If you receive contact information with the same name from the same phone more than once, only the most recently sent version appears in the recent calls list.

Viewing the Recent Calls List


1 From the main menu, select Recent Calls.

2 Scroll through the list.

To view the details of an item o n the list:

From the recent calls list, select the item you want information on.

Tip: To view the details of more items, keep scrolling.


1 Press .

.

2 If you want to view the rest of the recent calls list, press the volume controls.

3 Press .

to dismiss the recent calls list.

Choosing Picture View or List View

You can set your phone to show the picture associated with each item as you view the recent calls list or show the list without pictures.

1 From the recent calls list, press m

.

2 Select Recent Calls View.

3 Select List View to show the recent calls list without pictures. -or-

Select Picture View to show the picture associated with each entry.

Storing Items to Contacts

1 From the recent calls list, scroll to or select the item you want to store.

2 Press

A

under Store. -or-

If Store is not one of your options: Press m

.

Select Store or Update Contacts.

Storing Items to Contacts

Tip: If the item you want to store is a call, Store does not appear if the number is already stored in Contacts.

3 To store the item as a new entry, select [New

Contact]. -or-

To store the number to an existing entry, select the entry.

Note: Storing My Info or contact information from another phone to a Contacts entry that has a name assigned to it does not change the name of the Contacts entry.

4 If the item you want to store is a call, you must assign a Contacts type to the number:

With the Contacts type field highlighted, scroll left or right to display the Contacts type you want to assign the number.

5 If you want to add more information to the entry,

follow the applicable instructions in “Creating

Entries” on page 37.

6 Press

A

under Save.

Deleting Items

To delete an item from the recent calls list:

1 From the recent calls list, scroll to or select the item you want to delete.

33

Recent Calls

2 Press

A

under Delete. -or-

If Delete is not one of your options: Press m

.

Select Delete.

3 Press

O

or press

A


To delete all items on the recent calls list:

1 From the recent calls list, press m

.

2 Select Delete All.

3 Press

O

or press

A


Making Calls From the Recent

Calls List


1 From the main menu, select Recent Calls.

2 Scroll to the item containing the number you want to call.

• If you scroll to a call, you can make a call to the number that made the call. If the number is stored in Contacts, you can make a call to any of the numbers stored with it.

• If you scroll to My Info from another phone, you can make a call to the LINC ID of the phone that sent the information.

• If you scroll to contact information from another phone, you can make a call to any of the numbers in the contact information.

34

3 To place the call now, go to step 4. -or-

Scroll left or right to display the Contacts type for the number you want to call.

4 To make a phone call, press s

. -or-

To make an InstantLINC Mobile to Mobile call, press the PTT button.

You can also make calls while viewing the details of an item on the recent calls list:

1 From the recent calls list, select the item containing the number you want to call.

• If you select a call or contact information from another phone, you can make a call to the number shown first on the details screen.



. -or-



1 Press .

to display the most recent call.

2 Press the volume controls to scroll to the name or number you want to call.

• If you scroll to a call, you can make a call to the number that made the call.


• If you scroll to contact information from another phone, you can make a call to the number currently displayed.

3 To make a phone call, press t on the top of your phone. -or-


Making Calls From the Recent Calls List

35

Contacts

Contacts stores up to 600 numbers or addresses.

Each Contacts entry can store several numbers or addresses.

Information stored in Contacts is saved on your

SIM card.

A Contacts entry contains:

• A name — A name is required if you are storing more than one number or address to the entry; otherwise, it is optional. Typically, this is the name of the person whose contact information is stored in the entry.

• A ring tone — This is the sound your phone makes when you receive phone calls or call alerts from any of the numbers stored in the entry. You can assign the ring tone from your list of ring tones. If you do not assign a ring tone, the entry is created with a default ring tone assigned.

• A picture — This picture appears on the display when you receive phone calls from any of the phone numbers stored in the entry. You can assign the picture from the pictures stored in the media center. If you do not assign a picture, the entry is created with no picture assigned.

• A Contacts type — Each number or address stored must be assigned a Contacts type:

A

Mobile

B

LINC ID

C

Work1

D

Work2

E

Home

F

Email

G

Fax

H

Pager phone number

LINC ID number phone number phone number phone number email address phone number phone number

I

Talkgroup Talkgroup number

J

IP IP address

K

Other phone number

• A number or address — Each Contacts entry must contain a number or address. This may be any type of phone number, LINC ID, Talkgroup number, email address, or IP address.

36

Note: You can store numbers up to 64 digits long, but every 20 digits must be separated by a pause or wait. See

“Creating Pauses and Waits” on page 42.

• A Speed Dial number — When you store a phone number, it is assigned a Speed Dial number. You can accept the default Speed Dial number or change it.

• A voice name — If you create a voice name for a number, you can then dial that number by saying the voice name into your phone. This icon

P appears to the left of the Contacts type icon if a voice name is assigned.

Accessing Contacts

From the main menu, select Contacts. -or-

If you are on a call: Press m

. Select Contacts.

Creating Entries

A number or address and a Contacts type are required for all Contacts entries. Other information is optional. You may enter the information in any order by scrolling through the entry details.

After you have entered the number or address,

Contacts type, and any other information you want, you can press

A

under Save to save the entry to

Contacts.

Accessing Contacts

To cancel a Contacts entry at any time, press e


To create a Contacts entry:

1 To access the entry details screen:

Select Contacts > [New Contact]. -or-

From the Contacts list, press m

. Select New

Contact.

2 If you want to assign a name to the entry:

Select Name.

Enter the name. See “Entering Text” on page

62. When you are finished, press

O

.

Tip: Press

A

under Browse to select a name already in Contacts.

3 If you want to assign a ring tone or picture to the entry, select [Ring Tone/Picture]. See

“Assigning a Ring Tone or Picture” on page 38.

4 To assign a Contacts type to the number or address being stored:

Select the Contacts type field.

Select the Contacts type you want to assign.

5 To store a number or address:

Select the # field (or ID for an email address, or

IP for an IP address).

37

Contacts

Enter the number or address. For phone numbers, use the 10-digit format. For email

addresses, see “Entering Text” on page 62.

Tip: Press

A

under Browse to select a number or address from Contacts, the recent calls list, or Memo.

When you are finished, press

O

.

6 If you want to change the default Speed Dial number or a create a voice name for the entry,

select [Options]. See “Assigning a Speed Dial

Number or Voice Name”.

7 If you want to add more numbers or addresses to the entry:

Scroll past the information you already entered.

Enter the additional information for the entry using step 3 through step 6. You must assign a name to the entry, if you have not already.

8 Press

A

under Save.

Assigning a Ring Tone or Picture

Note: This feature may require a subscription to

Caller ID to function properly. Contact your sales representative or

SouthernLINC Wireless.

1 If you have not already, select [Ring

Tone/Picture].

38

2 If you want to assign a ring tone from the list of ring tones:

With Ringer highlighted, scroll left or right to choose a ring tone. -or-

Select Ringer. Select the ring tone you want to assign.

3 If you want to assign a picture from the media center:

Scroll to Picture. Scroll left or right to choose a picture. -or-

Select Picture. Select the picture you want to assign.

Only pictures that can be assigned to Contacts entries are displayed. Some large pictures cannot be assigned.

Tip: If an entry has a picture assigned and you want the entry to have no picture, select

[No Picture] or press

A

under Unassign.


A

under Back.

Assigning a Speed Dial Number or

Voice Name

1 If you have not already, select [Options].

2 The default Speed Dial number assigned to a phone number is displayed in the Speed # field.

This is always the next available Speed Dial location.

If you want to assign the phone number to a different Speed Dial location:

With the Speed # field highlighted, press

O

.

Press

A

under Delete to delete the current

Speed Dial number.

Enter the new Speed Dial number using the keypad.


O

.

3 If you want to create a voice name for a phone number, select Voice Name.

As directed by the screen prompts, say and repeat the name you want to assign to the number. Speak clearly into the microphone.


A

under Back.

Storing Numbers Faster

To store numbers to Contacts from the recent calls

list, see “Storing Items to Contacts” on page 33.

To store numbers to Contacts from Memo, see

“Memo” on page 57.

Storing Numbers Faster

To store numbers to Contacts from the idle screen:

1 Use the keypad to enter the number you want to store.

2 Press m

.

3 Select Store Number.

4 To store the number as a new entry, select [New



5 With the Contacts type field highlighted, scroll left or right to display the Contacts type you want to assign the number.

6 If you want to add more information to the entry,

follow the applicable instructions in “Creating

Entries” on page 37.

7 Press A under Done.

Editing Entries

1 From the Contacts list, scroll to or select the entry you want to edit.

2 Press

A

under Edit. -or-

If Edit is not one of your options: Press m

.

Select Edit.

The entry details screen displays.

39

Contacts

3 Follow the applicable instructions in “Creating

Entries” on page 37 to edit the various fields.

Viewing Entries

When you view Contacts entries, you can choose how much detail you want to see.

Viewing the Contacts List

In this view, each entry shows:

• The name assigned to the entry

• A small version of the picture assigned to the entry, if you have set Contacts to show pictures

in the Contacts list. See “Choosing Picture View or List View” on page 41.

• The types of numbers and addresses stored in the entry

To view entries from the Contacts list:

1 Access Contacts.

2 Scroll to view entries.

Tip: To find Contacts entries faster, use the keypad to enter the first letter of the name.

3 If an entry has more than one number or address stored,

<>

surrounds the Contacts type icon. Scroll left or right to view the icon for each number stored in the entry.

40

Selecting an Entry

In this view, each entry shows:

• The name assigned to the entry

• A small version of the picture assigned to the entry

• The name of the ring tone assigned to the entry

• The numbers and addresses stored in the entry

To select an entry:

1 From the Contacts list, select the entry you want to view.

2 Scroll to view the numbers and addresses stored in the entry.

Tip: To select other entries: Scroll left or right.

Or, press

#

or

*

.

To return to the Contacts list, press

A

under Back.

Viewing More Details

When an entry is selected, you can view more details about the entry by selecting items within the entry.

Viewing Details of a Number or Address

1 Select the entry.

2 Select the number or address you want to view details of.

If you select a phone number, you can view its

Speed Dial number and see whether it has a voice name.

To return to the entry, press

A

under Back or press

O

.

Viewing a Large Picture

To view a large version of the picture assigned to an entry:

1 Select the entry.

2 Select the first item shown on the entry screen.

This item shows the name assigned to the entry or No Name.

Note: You cannot make calls from this view.

To return to the entry, press A under Back or press

O

.

Choosing Picture View or List View

You can set Contacts to show the picture assigned to each entry as you view the Contacts list or show the Contacts list without pictures.

1 From the Contacts list, press m

.

2 Select Contacts View.

Viewing Entries

3 Select List View to show the Contacts list without pictures. -or-

Select Picture View to show the picture assigned to each entry.

Searching for a Name

To search for a name in Contacts:

1 From the Contacts list, press

A

under Search.

-or-

If Search is not one of your options: Press m

.

Select Search.

2 Enter the name you want to see. See “Entering

Text” on page 62.

3 Press

O

.

Your phone finds the name you entered or the nearest match.

Showing Only LINC IDs and

Talkgroups

To set Contacts to show only entries that contain

LINC IDs and Talkgroup entries:


.

2 Select Filter.

3 Set this option to Show Prvt/Grp.

41

Contacts

To set Contacts to show all entries:


.


3 Set this option to Show All.

Deleting Entries

Delete an Entry

1 From the Contacts list, scroll to or select the entry you want to delete.

2 Press m

.

3 To delete the entire entry, select Delete

Contact.

4 Press

O

or press

A


Delete a Number or Address

1 From the Contacts list, scroll to the entry that contains the number or address you want to delete.

2 Scroll left or right to display the Contacts type for the number you want to delete. -or-

Select the entry. Scroll to or select the number you want to delete.

3 Press m

.

4 Select Delete Number.

5 Press O or press A under Yes to confirm.

42

Note: If an entry contains only one number or address, deleting the number or address deletes the entry.

Checking Capacity

To see how many numbers are stored in Contacts:


.

2 Select Capacity.

Creating Pauses and Waits

When storing a number, you can program your phone to pause or wait between digits while dialing. A pause makes your phone pause for 3 seconds before dialing further. A wait makes your phone wait for your response before dialing further.

This feature is useful when using voice mail or other automated phone systems that require you to dial a phone number and then enter an access number.

To program a pause:

Press and hold

*

until the letter P appears. The

P represents a 3-second pause.

If you store 17035551235P1234, when you select this number and make a call, your phone dials the first 11 digits, pauses for 3 seconds, then dials the last 4 digits.

If you want a pause longer than 3 seconds, press and hold

*

more than once. Each P represents a

3-second pause.

To program a wait:

Press and hold

*

until the letter W appears. The

W means your phone waits before dialing further.

If you store 17035551235W1234, when you select this number and make a call, your phone dials the first 11 digits and then waits. A message appears asking if you want to send the rest of the digits.

Press

A

under Yes to dial the last 4 digits.

Tip: You can create pauses and waits while dialing a number from the keypad. See

“Creating Pauses and Waits While Dialing” on page 50.

International Numbers

For more information, please contact your sales representative or SouthernLINC Wireless at

1-800-406-0151.

Making Calls From Contacts

While Viewing the Contacts List

1 Access Contacts.

International Numbers

2 Scroll to the name or number you want to call.

Tip: To find Contacts entries faster, use the keypad to enter the first letter of the name.

3 To place the call now, go to step 4. -or-

Scroll left or right to display the Contacts type for the number you want to call.

4 To make a phone call, press s . -or-


If you are making an InstantLINC Mobile to Mobile call, your phone places the call to the LINC ID stored in the Contacts entry, even if the

InstantLINC Mobile to Mobile icon is not displayed.

If you are making a phone call:

• Your phone places the call to the phone number assigned to the Contacts type displayed.

• If the Contacts type displayed is not a phone number, your phone places the call to the phone number stored in the Contacts entry.

• If the Contacts type displayed is not a phone number and you have more than one phone number stored in the Contacts entry, your phone prompts you to select the phone number you want to place the call to.

43

Contacts

After Selecting an Entry

1 Access Contacts.

2 Select the Contacts entry that contains the number you want to call.

3 Scroll to or select number you want to call.

4 To make a phone call, press s . -or-


If you try to make a type of call that does not match the Contacts type of the number you chose, no call is placed.

Accessing Contacts with GSM

Phones

If you plan to use the information stored in

Contacts with an i2000, i2000plus, or any other

GSM phone, download iDEN Phonebook Manager.

Go to idenphones.motorola.com/iden/support for more information.

You can use iDEN Phonebook Manager to make the Contacts information saved to your i850 phone’s SIM card accessible in this type of phone.

44

Call Forwarding

Call forwarding sends calls to the phone numbers you specify. You can forward all calls to one number or forward missed calls to different numbers depending on the reason you missed the call.

You can forward phone lines 1 and 2 independently.

Forwarding All Calls

When you set your phone to forward all calls, an icon appears in the top row of the display:

G

Phone line 1 is active; calls to phone line 1 are being forwarded.

I


H

Phone line 1 is active; calls to phone lines 1 and 2 are being forwarded.

J


L


K

Phone line 2 is active; calls to phone lines 1 and 2 are being forwarded.

To forward all calls:

1 From the main menu, select Call Forward >

Forward > All Calls.

2 Select To.

If you specified a forwarding number for all calls before, this number displays.

To forward calls to this number, press

A

under

Back.

To delete this number, press

O

, then press and hold

A

under Delete.

3 To enter the number you want to forward calls to:

Enter the number using your keypad. -or-

Press

A

under Search. Select Contacts,

Recent Calls, or Memo. Select the number you want to enter.

4 Press

O

.

All your calls are now forwarded to the number you specified.

45

Call Forwarding

Turning Off Call Forwarding

If you do not want all your calls forwarded, turn the feature off:

1 From the main menu, select Call Forward > To.

2 Set this option to Off.

All your calls are now sent to your phone.

Calls you miss are forwarded according to the options set for missed calls. By default, missed calls are forwarded to voice mail.

Note: To receive voice mail messages, you must first set up a voice mail account with


Forwarding Missed Calls

You can specify a forwarding number for each type of missed call:

• If Busy — Your phone is on a call or transferring data.

• If No Answer — You do not answer on the first

4 rings.

• If Unreachable — Your phone is out of coverage or powered off.

Note: If you want a type of missed call sent to voice mail, the call forwarding number for that type of missed call must be your voice mail access number.

To forward missed calls:


Forward > Detailed.

2 Select If Busy to specify a forwarding number for calls received when your phone is busy.

3 If you specified a forwarding number for this type of call before, this number displays.

To forward calls to this number, press

B

under

Back and go to step 6. -or-

To delete this number, press

O

, then press and hold

A

under Delete.

4 To enter the number you want to forward this type of call to:


Press

A



5 Press

O

.

6 Repeat step 2 through step 5 for If No Answer

and If Unreachable.


A

under Back.

46

Viewing Call Forwarding

Settings


Forward > All Calls.

2 With To highlighted, press

A

under Status.

Viewing Call Forwarding Settings

47

Advanced Calling

Features

Call Waiting

Call Waiting lets you receive a second call while on an active call. Call Waiting is always available, unless you turn it off for a specific call.

If you are on a call and receive a second call, your phone emits a tone and displays a message saying you are receiving a second call.

To accept the second call and put the active call on hold:

Press A under Yes.

To accept the second call and end the active call:

1 Press e .

Your phone rings with the second call.

2 Answer the second call.

To decline the second call:

Press A under No. If you subscribe to voice mail, the call is forwarded to your voice mail box, unless you set Call Forward for If Busy to a different number.

Turn Off Call Waiting

To turn off Call Waiting during a call:

1 Press m

.

2 Select In Call Setup > Call Waiting.


Tip: To turn Call Waiting back on while still on the call, set this option to On.

To turn off Call Waiting for the next call you make or receive:

1 From the main menu, select Settings > Phone

Calls > Call Waiting.


Call Waiting is turned back on when you end the call.

Switching Between Calls

Any time you have one call active and one call on hold, to make the call on hold active and put the active call on hold:

Press

A

under Switch. -or-

If Switch is not one of your options: Press m

.

Select Switch.

48

Putting a Call on Hold

1 While on an active call, press m

.

2 Select Hold.

If you want to make the call active again, press

A under Resume.

Calling 2 People

Putting a Call on Hold, Making a

Second Call

1 Place or receive a phone call.

2 While the call is active, press m

.

3 Select 2nd Call. This puts the call on hold.

4 Enter the second phone number you want to call.

Tip: For quick ways to enter the number, press m .

5 Press s to place the call.

To end the second call and make the call on hold active again:

Press e

.

To make the call on hold active and put the active call on hold:

Press

A

under Switch.

Putting a Call on Hold

Merging 2 Calls into a 3-Way Call

After you put a call on hold and place a second call, you can combine these calls into a 3-way call:

1 Press m

.

2 Select Join.

All 3 people in the call can speak to and hear each other.

Making a 3-Way Call

1 Place or receive a phone call.

2 While the call is active, press m

.

3 Select 3 Way. This puts the call on hold.

4 Enter the second phone number you want to call.

Tip: For quick ways to enter the number, press m

.

5 Press s

to place the call.

6 Press

A

under Join.

All 3 people in the call can speak to and hear each other.

49

Advanced Calling Features

Creating Pauses and Waits

While Dialing

You can enter a pause or wait while dialing a number. For information on using pauses and

waits, see “Creating Pauses and Waits” on page

42.

To create a pause while dialing a phone number:

1 From the keypad, enter the digits you want to occur before the pause.

2 Press m

.

3 Select Insert Pause.

4 Enter the digits you want to occur after the pause.

To create a wait while dialing a phone number:

1 From the keypad, enter the digits you want to occur before the wait.

2 Press m

.

3 Select Insert Wait.

4 Enter the digits you want to occur after the wait.

Making International Calls

For more information, please contact your sales representative or SouthernLINC Wireless at

1-800-406-0151.

50

One Touch PTT

One Touch PTT sets your phone to call the most recent LINC ID on the recent calls list, or a LINC ID you choose, every time you press the PTT button.

Setting One Touch PTT

To the Most Recent LINC ID


InstantLINC > One Touch PTT.

2 Set this option to Last Call.

To A LINC ID


InstantLINC > One Touch PTT > Assigned

Number.

2 To enter the LINC ID you want your phone to call every time you press the PTT button:


Press

A



Tip: If you are entering a Talkgroup number, enter # before the number.

3 Press

O

.

Turning Off One Touch PTT


InstantLINC > One Touch PTT.


Setting Flip Actions

For Answering Calls

To set your phone to answer calls when you open the flip:


Calls > Flip Activation > Flip to Ans.

2 Set this option to On.

To set your phone not to answer calls when you open the flip:

Set Flip to Ans to Off in step 2.

For Ending Calls

To set your phone to end calls when you close the flip:


Calls > Flip Activation > Flip to End.


Setting Flip Actions

To set your phone not to end calls when you close the flip:

Set Flip to End to Off in step 2.

Note: If you are using your phone with a headset, and you have the Flip to End option set to On, closing your flip sends incoming sound to the headset and does not end the call.

Group Calls

A group call is similar to an InstantLINC Mobile to

Mobile call, but is made to all members of a

Talkgroup at once. A Talkgroup is a predetermined group of SouthernLINC Wireless customers.

Before you can make or receive group calls, a

Talkgroup must be established. After the Talkgroup is established, you must join the Talkgroup.

Joining a Talkgroup

Your sales representative or SouthernLINC

Wireless establishes Talkgroups for you and assigns each Talkgroup a Talkgroup number. You can choose a name for each of your Talkgroups when you create entries for them in Contacts.

51


To receive group calls made to any of these

Talkgroups, you must join the Talkgroup.

1 Press

A

under Contcs. -or-

From the main menu, scroll to Contacts and press

O

.

2 Scroll to the Talkgroup you want to join.

3 Press

A

under Join.

Note: You can only monitor one Talkgroup at a time.

Making Group Calls

1 Press

#

. Then enter the Talkgroup number using the keypad. -or-

Choose the Talkgroup name from Contacts or recent calls list.

2 Proceed as if making an InstantLINC Mobile to

Mobile call.

Receiving Group Calls

To answer a group call:

Proceed as if answering an InstantLINC Mobile to Mobile call. Only one person at a time may speak on a group call.

The LINC ID or name of the person who is speaking will appear on the display below the

Talkgroup number.

Turning off Group Calls

To set your phone to prevent you from hearing group calls to your Talkgroup:


InstantLINC > Tkgrp Silent.

2 Set this option On.

To set your phone to let you hear group calls to your Talkgroup:

Set Tkgrp Silent to Off in step 2.

Call Timers

Call timers measure the duration of your phone calls, InstantLINC Mobile to Mobile calls, or group calls, and circuit data use, as well as the number of

Kilobytes sent and received by your phone:

• Last Call — displays the duration of your most recent phone call.

• Phone Reset — keeps a running total of your phone call minutes, until you reset it.

• Phone Lifetime — displays the total minutes of all your phone calls.

52

• Prvt/Grp Reset — keeps a running total of all of your InstantLINC Mobile to Mobile calls and group call minutes, until you reset it.

• Prvt/Grp Lifetime — displays the total minutes of all your InstantLINC Mobile to Mobile calls and group calls.

• Circuit Reset — keeps a running total of all of your circuit data use, until you reset it.

• Circuit Lifetime — displays the total minutes of all of your circuit data use.

• Kbytes Reset — keeps a running total of the number of Kilobytes sent and received by your phone, until you reset it.

To view or reset a timer:

1 From the main menu, select Call Timers.

2 Select the feature you want to view or reset.

3 To view a feature without resetting: Press

O when you are finished viewing. -or-

To reset a feature: Press

A

under Reset. Press

O

or press

A


Note: The values displayed by Call Timers should not be used for billing. Call timers are estimates only.

Using Your Phone as a Modem

Using Your Phone as a Modem

Note: Contact your SouthernLINC Wireless sales representative for more information on this feature.

To use your phone as a modem with a laptop, handheld device, or desktop computer:


connector cover

53


2 With the phone’s display facing up, insert a data cable’s connector into the accessory connector, until you hear a click.

3 Insert the data plug into the data port of the other device.

When used as a modem, your phone has these data transfer modes:

• Circuit data — used for sending and receiving faxes and for transferring large files

• Packet data — used for small file transfers such as email

To use these services, you must install the iDEN

Wireless Data Services software (available separately). For more information on setting up your computer and your i850 phone for packet and circuit data calls, refer to the Wireless Data

Services User’s Guide or contact SouthernLINC

Wireless.

Making TTY Calls

To use your phone to make phone calls using a teletypewriter (TTY) device:

1 Connect one end of a 2.5mm cable into the audio jack on your phone. Connect the other end of the cable to your TTY device.

2 Make sure that your phone’s TTY feature is on and select the TTY mode you want to use.

3 Use your phone to enter phone numbers and make calls.

When you make a TTY call, these icons appear on the phone’s display:

N

Phone call is active.

O

Phone call is on hold.

54

TTY device features such as Turbo-Code,

High-Speed, and Interruption are not supported by your phone. These features must be turned off or disabled to use your TTY device with your phone.

Turning On the TTY Feature

Your phone’s TTY feature must be on if you want to make TTY calls, set the TTY mode, or change the TTY baud rate. To make sure the TTY feature is on:

From the main menu, select Settings > Phone

Calls > TTY > Use TTY. This field must say On.

Choosing a Mode

Your phone supports these TTY modes:

• TTY — You type and read text on your TTY device.

• VCO (Voice-Carry-Over) — You speak into your phone and read text replies on your TTY device.

• HCO (Hearing-Carry-Over) — You type text on your TTY device and listen to voice replies on your phone speaker.

To change mode while not in a call:


Calls > TTY > Type.

2 Select the TTY mode you want.

Making TTY Calls

When you make a TTY call, the call begins in the

TTY mode you last selected.

To change mode during a call using your phone:

1 Press m

.

2 Select In Call Setup > TTY > Type.

3 Select the mode you want.

To change mode during a call using your TTY device, issue one of the following commands:

• “VCO please” — to select VCO mode

• “HCO please” — to select HCO mode

• “HCO off please” — to turn off HCO mode

Important: When you are using HCO, the sound coming from your phone speaker may be uncomfortably loud. Use caution when putting the phone to your ear.

(For information on setting the volume

of your phone speaker, see “Setting the

Volume” on page 120.)

Changing the TTY Baud Rate

By default, your phone’s TTY baud rate is set to

45.45, the baud rate required for TTY calls within the U.S. To make calls outside the U.S., set your

TTY baud rate to 50.00.

55


To change the TTY baud rate:


Calls > TTY > Baud.

2 Select the baud rate for your location.

56

Memo

Memo lets you store a number, make a call to that number, and save it to Contacts.

To create a memo:

1 From the main menu, select Memo.

2 Enter the number using your keypad.

3 Press

O

.

To view the memo later:

From the main menu, select Memo.

To delete the memo:


2 Press and hold A under Delete.

3 Press

O

.

To edit the memo:


2 Enter the new number.

3 Press O .

To make a call to the memo number:



. -or-


To store the memo number to Contacts:


2 Press m

.

3 Select Store to Contacts.




5 With the Contacts type field highlighted, scroll left or right to display the Contacts type you want to assign the number.

6 Press

A

under Save.

57

Ring Tones

To set the ring tone your phone makes when you receive phone calls, call alerts, message notifications, pictures sent using LINC View, or

Datebook reminders:

1 From the main menu, select Ring Tones.

2 Make sure VibeAll is set to Off.

3 Scroll through the list of ring tones and select the one you want to assign. Vibrate sets your phone to vibrate instead of making a sound; Silent sets your phone to neither vibrate nor make a sound.

Tip: Highlighting a ring tone lets you hear it.

4 Select the features you want to assign the ring tone to.


A

under Done.

Note: This icon M appears on the display if you set your phone to neither vibrate nor make a sound for phone calls.

Setting Your Phone to Vibrate

You can set your phone to vibrate instead of making a sound when you receive all phone calls,

InstantLINC Mobile to Mobile calls, group calls, call alerts, messages notifications, pictures sent using

LINC View, and Datebook reminders.

58

1 From the main menu, select Ring Tones >

VibeAll.


Tip: Pressing the volume controls to turn down the volume as far as possible sets VibeAll to On.

Note: You must press the volume up key twice from VibeAll in order to restore ring tone.

To set your phone to vibrate instead of making a sound for some features but not others:



3 Select Vibrate from the list of ring tones.

4 Select the features you want to set to make no sound.


A

under Done.

Note: To set ring options for InstantLINC Mobile to Mobile calls and group calls, see

“Setting Your Phone to Vibrate” on page

120.

These icons indicate how the ringer is set.

Q

The phone always vibrates instead of making a sound.

R

The phone vibrates instead of making a sound for phone calls.

u

Group calls and InstantLINC Mobile to Mobile calls are heard through the earpiece, not the speaker.

These icons may appear at the same time.

Ring and Vibrate

To set your phone to ring and vibrate when you receive phone calls or call alerts:



3 Scroll through the list of ring tones and highlight the one you want to assign.

4 Press m

.

5 Select Assign w/Vibe.

6 Select the features you want to set to ring and vibrate.


A

under Done.

This icon S appears on the display.

Ring and Vibrate

Assigning Ring Tones to

Contacts

Note: This feature requires a subscription to


SouthernLINC Wireless for more information.

You can set the ring tone your phone makes when you receive phone calls or call alerts from someone you have stored in Contacts.



3 Scroll through the list of ring tones and select the one you want to assign.

4 Select A Contact.

5 Select the Contacts entry you want to assign the ring tone to.

Viewing Ring Tone

Assignments



3 Highlight any ring tone.

4 Press m

.

59

Ring Tones

5 Select Overview.

6 Scroll to view ring tones assigned to features and Contact entries.

Downloading More Ring

Tones

If you want to use other ring tones, you can download them into your phone for a fee. Go to www.southernlinc.com/downloads for a selection of custom ring tones and downloading instructions.

Note: Ring tones purchased from this web site may be downloaded only once. If you delete a ring tone from your phone, you must purchase it again to download it again.

About DRM Ring Tones

Your phone supports gifting and Tell-A-Friend services for DRM ring tones. However, these services may not be offered by SouthernLINC

Wireless. Please contact SouthernLINC Wireless for more information about these services.

For more information about DRM items, see

“Digital Rights Management” on page 84.

Managing Memory

To view the amount of memory available for custom ring tones:



3 Highlight any ring tone.

4 Press m

.

5 Select Memory Usage.

Deleting custom ring tones frees memory.

Note: Ring tones are stored in your phone using the same memory space used to store messages, voice records, Java application data, pictures, and wallpaper images. Deleting some of these other items frees memory for ring tones.

Deleting Custom Ring Tones

Deleting a ring tone from the list of ring tones deletes it from all parts of your phone, including the media center and Contacts.

60

Except for DRM ring tones, if you delete a ring tone that you purchased from your phone, you will have to purchase it again. Under certain conditions, some DRM vendors will not charge you if you download an item multiple times within a given time frame. Please contact the DRM vendor to learn more about their download regulations.

To delete a custom ring tone:



3 Scroll to the ring tone you want to delete.

4 Press m

.


6 Press

A


Deleting Custom Ring Tones

61

Entering Text

You can enter text, numbers, and symbols into your phone using Alpha, Word, Numeric, or

Symbol text input modes.

l

Alpha — Press a key several times for each character.

j

Word — Press a key once for each letter while words likely to be the one you want are chosen from a database.

i

Symbols — Enter punctuation and other symbols.

k

Numeric — Enter numbers.

When you access a screen that requires you to enter text, you start in the mode last used.

To choose a text input mode:

1 At a screen that requires you to enter text, press m .

2 Select the text input mode you want to use. A checkmark appears next to the current mode.

Using Word Mode

In Word mode, T9 Text Input analyzes the letters on the keypad button you press and arranges them to create words. As you type, T9 Text Input matches your keystrokes to words in its database and displays the most commonly used matching word. You can add your own words to this database.

Entering a Word

1 Select Word as your text input mode.

2 Type a word by pressing one key for each letter.

For example, to type “test” press

8 3 7 8

.

The displayed word may change as you type it.

Do not try to correct the word as you go. Type to the end of the word before editing.

3 If the word that appears is not the desired word, press

0

to change the word on the display to the next most likely word in the database.

Repeat until the desired word appears.

If the desired word does not appear, you can add it to the database.

62

Adding Words to the Database

1 Select Alpha as your text input mode.

2 Type the word using Alpha mode.

3 Select Word as your text input mode.

4 Press

#

.

The word you typed in Alpha text entry mode is now in the database.

Note: You cannot store alphanumeric combinations, such as Y2K.

Choosing a Language

To change the language of the database:

1 At a screen that requires you to enter text, press m

.

2 Select Languages.

3 Select the language you want for your database.

Special Function Keys

Some of the phone’s keys assume different functions while in Alpha or Word mode.

Spaces

Press

#

for a space.

Special Function Keys

Capitalization

When you press and hold the

#

key, it acts as a

3-way toggle. Press and hold

#

to make the next letter typed uppercase (shift), to make all subsequent letters typed uppercase (caps lock), or to go back to lowercase letters.

These icons appear in the top row of your display: m or X

Shift is on.

n or W

Caps lock is on.

When neither of these icons appear, letters typed are lowercase. Scrolling up after typing a letter makes that letter uppercase.

Note: When creating a text message, you cannot capitalize by scrolling up.

Your phone automatically makes the first letter of a sentence uppercase.

Punctuation

Press

1

or

0

to insert punctuation. Continue to press the key to view the list of symbols available through that key. Pause to select the symbol you want.

63

Entering Text

Note: Additional punctuation symbols are available in Symbols mode.

64

Messages

You can receive the following types of messages on your phone:

• Voice mail messages

• Text messages

• Fax mail

• Net alerts

You have 2 ways to access the messages you receive:

• Respond to the message notification that appears when the message is received.

• Dismiss the message notification and access the message later through the message center.

You can listen to or view these messages, delete them, or continue to store them in the message center.

Message Notifications

When you receive a message, your phone notifies you with text on the display and a notification tone or vibration. You can access the message or dismiss the notification.

If you dismiss the notification, the message is not deleted. It can be accessed through the message center.

If you are not on a phone call when you receive a message, your phone sounds a notification tone every 30 seconds until you access the message, you dismiss the notification, or the alert time-out expires.

Setting Notification Options

To control whether your phone sounds message notification tones while you are on phone calls:


Calls > Notifications.

2 Select the option you want:

• Receive All — Tones sound during calls for all types of messages.

• Message Mail Only — Tones sound during calls for Text messages; tones for all other types of messages are held until you end calls.

• Delay All — Tones for all types of messages are held until you end calls.

Tip: To set notification options during a call:

Press m

. Select In Call Setup >

Notifications.

65

Messages

Message Center

The message center manages your messages.

All your messages are stored in the message center. The message center shows how many messages you have of each type.

To access your messages through the message center:

1 From the main menu, select Messages.

2 Scroll to the type of message you want to access.

3 Press

O

or press

A

under the display option on the left.

66

Voice Mail Messages

Note: To receive voice mail messages, you must first set up a voice mail account with


Receiving a Message

When you receive a voice mail message, New

Voice Mail Message appears on the display.

To call the SouthernLINC Wireless voice mail system and listen to the message:

Press

A

under Call.

To dismiss the message notification:

If the flip is closed, press

.

. -or-

If the flip is open, press

O

or press

A

under

Back, or close the flip.

If the caller leaves a message, this icon y appears on the display, reminding you that you have a new message.

Accessing Voice Mail from the Message Center

From the main menu, select Messages > Voice

Mail.

Sending Unanswered Calls to

Voice Mail

To send a phone call to voice mail instead of answering it:

If the flip is closed, press

.

. -or-

Press e

. -or-

Press

A

under No.

67

Text Messaging

Your phone can send and receive short messages.

Setting Up

Before you begin using Text messaging, you may need to set up your signature, service center number, and expiration information:

1 From the main menu, select Messages.

2 Scroll to Text Inbox.

3 Press m

.

4 Select Text Msg Setup.

5 Select Signature.

Enter your signature. It may be up to 11 characters long. When you are finished, press

O

.

6 Select Srvc Cntr No.

Enter the phone number of your service center.

If you do not know this number, contact



O

.

7 Select Expire After.

This is the amount of time messages you send are saved at the service center if they cannot be delivered. After this period, they are discarded.

Scroll to select the number of days you want your messages to be saved.


O

.

8 Select Auto Clean Up. Set this option to On if you want your phone to delete sent messages.

If you set Auto Clean Up to On, select Clean

Up After to set the number of days after which sent messages are deleted or the number of messages to be kept.

9 Press

A

under Done to save the information you entered.

Receiving a Message

To view the message:

Press

A

under Read.

To dismiss the message notification:


. -or-


A

under Back or close the flip.

68

If your phone is powered off when you receive a text message, your phone notifies you the next time you power it on. If you are out of your coverage area, your phone alerts you when you return to your coverage area.

Tip: While reading a text and numeric message that contains a phone number, you can press s

to call that number.

Reading from the Message

Center

1 From the main menu, select Messages > Text

Inbox.

2 Select the message you want to read. -or-

Press the number of the message you want to read.

3 If the message fills more than one screen, scroll to read it.

Tip: Scrolling through one message lets you view the next message.

4 To save the message, press

O

. -or-

To reply to the message, press

A

under Reply.

-or-

To see all other choices, including forwarding and deleting the message, calling the sender, or

Reading from the Message Center storing the sender’s number in Contacts, press m

.

Creating and Sending

Messages

1 From the main menu, select Messages >

[Create Message]. -or-

Select [Create Message] from Text Inbox, Text

Outbox, or Drafts. -or-

Highlight Quick Notes and press

A

under

Create.

Tip: This option is available from many context-sensitive menus in the message center.

2 To address the message:

Use the keypad to enter the phone number of the person you want to send the message to.

-or-

Press

A

under Browse. Select Contacts,


When you are finished, press O .

3 Enter the text of the message. -or-

69

Text Messaging

To use a quick note: Press

A

under Browse.

Scroll to the quick note you want. For more

information on quick notes, see “Using Quick

Notes”.


O

.

4 If you want to send the message, press

A

under

Send. -or-

To edit the message, press

O

. -or-

To delete the message without sending it, press

A

under Cancel. -or-

If you want to request confirmation of delivery, save the message as a draft, or set the sending method, press m

. Select the option you want.

Beginning Messages From the Recent

Calls List

1 From the recent calls list, scroll to the name you want to send a message to.

2 If the entry has more than one phone number stored, view the phone number you want to send the message to.

3 Press m

.

4 Select Compose SMS. The message is automatically addressed to the phone number you chose.

5 Follow step 3 through step 4 of “Creating and

Sending Messages” on page 69.

Beginning Messages From the Idle

Screen

1 Using the keypad, enter the number you want to send a message to.

2 Press m .

3 Select Compose SMS. The message is automatically addressed to the phone number you chose.

4 Follow step 3 through step 4 of “Creating and

Sending Messages” on page 69.

Using Quick Notes

Quick notes are short, pre-written text messages that you can create, edit, and send. You can store up to 20 quick notes. A quick note may be up to 30 characters long.

To create a quick note:

1 From the main menu, select Messages > Quick

Notes > [New Note].

2 Press O or press A under Create. Enter text.

-or-

To choose from pre-installed notes, select the note you want.

70

Tip: For more options, including sending the quick note, press m

.

Using Drafts

When you save a message as a draft, it is saved in the drafts folder.

To edit a draft:

1 From the main menu, select Messages >

Drafts.

2 Select the draft you want to edit.

3 To edit the fields you want to change, follow

step 2 through step 4 in “Creating and Sending

Messages” on page 69.

Resending Messages

To resend a message:


Outbox.

2 Scroll to the message you want to resend. -or-

Press the number of the message you want to resend.

3 Press s

. -or-

Press m

. Select Resend.

Creating and Sending Messages

Deleting Sent Messages

To delete a sent message:


Outbox.

2 Scroll to the message you want to delete.

3 Press

A

under Delete.

4 Press

A


To delete all unlocked sent messages:


Outbox.

2 Press m

.


4 Press

A


Locking and Unlocking Sent

Messages

When you lock a message, it cannot be deleted until you unlock it.

Locking a Message


Outbox.

2 Scroll to the message you want to lock or unlock.

3 Press m

.

71

Text Messaging

4 Select Lock.

Unlocking a Message


Outbox.

2 Scroll to the message you want to lock or unlock.

3 Press

A

under Unlock.

Sorting Messages

You can sort messages in your inbox by sender, time and date, and status. You can sort messages in your outbox by recipient, time and date, and status.


Inbox or Messages > Text Outbox.

2 Highlight any messages.

3 Press m

.

4 Select Sort and Order.

5 Select Sort By to specify the sorting method.

6 Select Order By to specify the sorting order.

Managing Memory

Your text inbox, outbox, and drafts folder have a set amount of memory available for storing messages.

72

The text inbox holds 20 messages. If the text inbox is full, you cannot receive messages until you delete some existing messages.

The outbox and drafts folder share memory space.

Together they can hold 30 messages. If the outbox and drafts folder memory is full, you cannot send messages or save drafts until you delete some existing messages.

To view the amount of memory available in your text inbox:


Inbox.

2 Press

A

under Memory.

To view the amount of memory available in your outbox and drafts folder:


Outbox or Messages > Drafts.

2 Press

A

under Memory.

Camera

The camera in your i850 phone takes pictures. You can save these pictures in your phone and view them through the media center.

You can send the pictures you take in InstantLINC

Mobile to Mobile calls, assign them to Contacts entries, or set them as your phone’s wallpaper.

Accessing the Camera

From the main menu, select Camera. -or-

From the idle screen, press c

. -or-

On your keypad, press the number assigned to the Camera shortcut. -or-

Access the camera from the media center. See

“Accessing the Camera” on page 83. -or-

Access the camera during an InstantLINC

Mobile to Mobile call. See “Starting a Call by

Sending a Picture” on page 89. -or-

If you set the camera as a power up application under Settings, then press p

to power up your phone.

Taking Pictures

1 Access the camera.

2 If you want to adjust the zoom, lighting, picture quality, picture size, or a timer, set these options.

See “Setting Picture Options”.

3 Aim the camera lens on the flip. Use the internal display as the viewfinder.

4 When the image you want to capture is in view, press c

or press

O

or press

A

under Capture.

5 To save the picture, press c

or press

O

or press

A

under Store. -or-

To discard the picture without saving it, press

A under Discard. -or-

To choose another action, see “More Actions for

Captured Pictures” on page 75.

Setting Picture Options

When you take a picture, you can set the zoom, lighting, picture quality, and picture size, and set a timer to delay capturing the picture.

To set any of these options:

1 Press m

.

2 Select the option you want.

3 Select the value you want for that option.

73

Camera

Tip: You can also set zoom by scrolling up and down and set picture size by scrolling left and right.

If you either discard the picture or save it by either pressing

O

or selecting Save from the context-sensitive menu, the only picture option that changes is the timer. The timer returns to its default: Off.

If you choose any other action, all picture options return to their defaults.

Zoom

The Zoom option lets you choose a closer view.

The values are:

• 1X — no change

• 2X — twice as large

• 4X — 4 times as large

1X is the default.

Lighting

The Lighting option lets you adjust the camera settings for different lighting conditions:

• Normal. Used for normal light exposure.

• Low Light. When the light is slightly dimmer, the lens lets in more light to compensate for lack of light.

74

Normal is the default.

Picture Quality

The Picture Quality option lets you choose the sharpness the picture will have after it is captured.

The values are:

• Normal — no change

• Standard — higher resolution

When you receive your phone, Normal is the default. You can choose a new default for this

option. See “Customizing the Camera” on page 76.

Pictures taken with this option set to Fine use more memory space.

Picture Size

The Picture Size option lets you choose the size the picture will have after it is captured.

From smallest to largest, the values are: Small,

Medium, Wallpaper, Large, and XLarge.

If you plan to use the image as wallpaper, it is best to select the Wallpaper size.

When you receive your phone, Medium is the default. You can choose a new default for this

option. See “Customizing the Camera” on page 76.

Larger pictures use more memory space.

Self-Timer

The Self-Timer option lets you delay capturing the picture for the number of seconds you choose.The camera captures the picture after the amount of time you chose elapses.

To turn off the timer before the picture is captured, press

A

under Cancel.

The values are: Off, 10 seconds, 15 seconds, 20 seconds.

Off is the default.

More Actions for Captured

Pictures

After you capture a picture as described in “Taking

Pictures” on page 73, you can send it in an

InstantLINC Mobile to Mobile call, assign it to a

Contacts entry, or set it as your phone’s wallpaper.

You can also access the media center to view and perform actions on the pictures there.

Choosing any of these options automatically saves the captured picture.

More Actions for Captured Pictures

Sending in InstantLINC Mobile to

Mobile Calls

For information on sending captured pictures in

InstantLINC Mobile to Mobile calls, see “Starting a

Call by Sending a Picture” on page 89.

Assigning to Contacts




1 After you have captured a picture, press m

.

2 Select Set As Caller ID.

3 To store the picture a new entry, select [New


To store the picture to an existing entry, select the entry.

Only entries that include phone numbers are displayed. This icon g appears next to entries that have pictures assigned.

4 If you selected an entry with a picture assigned, press

O

or press

A

under Yes to overwrite the assigned picture. -or-

Press A under No to return to the list of entries without overwriting the assigned picture.

75

Camera

Setting as Wallpaper

1 After you have captured a picture, press m

.

2 Select Set As Wallpaper.

Note: If you later set your wallpaper to Auto

Cycle, the picture is included and will appear on the idle screen. See

“Wallpaper” on page 120.

Accessing the Media Center

You can access the media center from the camera at any time, except when you are using the

Camera Setup menu or viewing the memory screen.

1 Press m

.

2 Select Media Center.

Customizing the Camera

The Camera Setup menu lets you customize the camera:

• Ask for Name — If you set this option to On, you are prompted to enter a name for each picture before you save it. Otherwise, pictures are automatically saved with the date and a number as their names.

• Shutter Sound — sets the sound the camera makes as it captures a picture.

76

Note: The volume of the shutter sound is controlled by your phone’s speaker volume.To set your phone’s speaker

volume, see “Setting the Volume” on page

120.

• Default Size — sets the default value for the

Picture Size option.

• Default Quality — sets the default value for the

Picture Quality option.

To access the Camera Setup menu:


2 Press m .

3 Select Camera Setup.

Tip: This option is available from many context-sensitive menus when you are using the camera.

Managing Memory

While you are taking pictures, the percentage of free memory appears on the screen.

To view your used memory, free memory, and memory capacity:


2 Press m

.


Tip: This option is available from many context-sensitive menus when you are using the camera.

To free memory, delete items from the media

center. See “Media Center” on page 78.

Managing Memory

77

Media Center

The media center lets you access pictures and audio recordings.

All pictures saved in your phone can be accessed through the media center.

The following audio recordings can be accessed through the media center:

• Voice records created when your phone was not in a call

• Musical ring tones in the list of ring tones

• Audio recordings you downloaded to your phone

Pictures in the media center can be sent in

InstantLINC Mobile to Mobile calls using LINC

View. See “Using LINC View” on page 88.

You can transfer pictures from your phone to your computer using a data cable and iDEN Media

Downloader software. You can download a copy of the Media Downloader software from the Software

Downloads page in the Support section of idenphones.motorola.com.

Viewing the Media Center

To access the media center:

From the main menu, select Media Center. -or-

From the camera, press m

. Select Media

Center.

Scroll to view the items in the media center.

Choosing Thumbnail View or List

View

You can set the media center to show a thumbnail of each picture as you view the list of items or show the list of items without thumbnails.

To change views:

1 Access the media center.

2 Press m

.

3 Select Set View.

4 Select Plain List View or Thumbnail List View.

Filtering by Media Type

You can set the media center to show all items, only pictures or only audio recordings.

Setting Filtering


78

2 Press m

.


4 Select All, Pictures, or Audio.

Tip: You can also scroll through these options while viewing the list of items by either scrolling left or right or pressing

*

or

#

.

Keeping the Last Filter Setting

You can set the media center to show all items every time you access it or to keep the filtering setting you had when you last viewed it.


2 Press m

.

3 Select Setup.

4 Select Remember Filter to keep the filtering setting you had when you last viewed the media center.

When you receive your phone, the media center is set to show all items every time you access it.

Accessing Items Listed

To access a picture or audio recording, select it from the list of items in the media center.

With an item selected, scroll up or down to access the items that appeared before and after it in the list.

Forward Locked Items

Sorting by Time or Name

You can set the media center to sort items by the time the item was created or by the name of the item.


2 Press m

.

3 Select Setup.

4 Select Sort.

5 Select By Time or By Name.

When you receive your phone, the media center is set to sort items by time.

Forward Locked Items

Some items saved to the media center from

InstantLINC Mobile to Mobile calls or by downloading may be forward locked. Forward locked items are usually copyright protected, and you cannot share them with anyone, such as in

InstantLINC Mobile to Mobile calls, or by uploading them from your phone.

You cannot remove forward locking from an item.

79

Media Center

When you view items in the media center, one of these icons appears next to each forward locked item: f

Forward locked.

c

Forward lock and locked.

When an item is locked, it cannot be deleted from

the media center. See “Locking Items” on page 82.

Locking an item has no effect on its forward locking.

DRM Items

Except for Java applications, which download to

Java Apps, the default location for any DRM items that you download is the media center.

Depending on how a given third-party vendor has set rights for an item, the item may include the following status icons. c The item is a DRM item.

e The DRM item has expired.

All DRM items are forward locked. As with other items in media center, you can lock DRM items.

See “Locking Items” on page 82.

Note: While your phone supports gifting and

Tell-A-Friend services for DRM items, these services may not be offered by

SouthernLINC Wireless. Please contact

SouthernLINC Wireless for more information.

Pictures

The media center lets you view pictures, send them in InstantLINC Mobile to Mobile calls, assign them to Contacts entries, or set them as your phone’s wallpaper.

Viewing

To view a picture, select it from the list of items in the media center.

If your phone is set to show thumbnails, a thumbnail of each picture appears next to the picture in the list of items. If your phone is not set to show thumbnails, this icon g

appears next to the picture.

To see a larger or smaller view of the picture you are viewing:

1 Press m .

2 Select Zoom.

3 Select the zoom option you want.

80

If the picture does not fit in the display, scroll left and right and up and down to view different parts of the picture.

Sending in InstantLINC Mobile to

Mobile Calls

For information on sending stored pictures in

InstantLINC Mobile to Mobile calls, see “Starting a

Call by Sending a Picture” on page 89.





1 Scroll to or select the picture you want to assign to a Contacts entry.

2 Press m

.

3 Select Set As Caller ID.




Only entries that include phone numbers are displayed. This icon g appears next to entries that have pictures assigned.

Audio Recordings

5 If you selected an entry with a picture assigned, press

O

or press

A

under Yes to overwrite the assigned picture. -or-

Press

A

under No to return to the list of entries without overwriting the assigned picture.

Setting as Wallpaper

1 Scroll to or select the picture you want to set as wallpaper.

2 Press m .

3 Select Set As Wallpaper.

Note: If you later set your wallpaper to Auto

Cycle, the picture is included and will appear on the idle screen. See

“Wallpaper” on page 120.

Audio Recordings

The media center lets you play audio recordings and assign them to Contacts entries.

Playing

To play an audio recording, select it from the list of items in the media center.

This icon a appears next to each audio recording in the list of items.

81

Media Center

Tip: When viewing the list of items in the media center, you can scroll left or right, or press

*

or

#

, to change the type of media that is displayed in the list.

To stop the audio recording before it has finished playing:

Press

O

. -or-

Scroll left.

To restart the audio recording, scroll right.

When you play an audio recording, an animated image appears on the display.


To assign an audio recording in the media center as the ring tone for a Contacts entry:

1 Scroll to or select the audio recording you want to assign.

2 Press m

.

3 Select Assign As Ringer.

4 Select the Contacts entry you want to assign the ring tone to.

Note: You cannot assign a voice record as the ring tone for a Contacts entry.

Renaming Items


2 Scroll to or select the item you want to rename.

3 Press m

.

4 Select Rename.

5 Delete the item’s name and enter a new name.

6 Press

O

.

Locking Items

When you lock an item in the media center, it cannot be deleted until you unlock it.


2 Scroll to or select the item you want to lock or unlock.

3 Press m

.

4 Select Lock to lock the item. -or-

Select Unlock to unlock the item.

When you view items in the media center, one of these icons appears next to each locked item:

R

Locked.

c

Forward lock and locked.

82

Deleting Items

Deleting items from the media center deletes them from all parts of your phone, including the list of ring tones, the list of voice records, and Contacts.

Under certain conditions, some DRM vendors will not charge you if you download an item multiple times within a given time frame. Please contact the

DRM vendor to learn more about their download regulations.

Deleting an Item

1 Scroll to or select the item you want to delete.

2 Press m

.


4 Press

O

or

A


Deleting All Items

You can delete all unlocked items currently in view, depending on how media center filtering is set. See

“Filtering by Media Type” on page 78. If filtering is

set to show all types of media center items, all unlocked items are deleted.


2 Press m

.


4 Press

O

or

A


Deleting Items

Accessing the Camera

You can access the camera from the media center at any time, except when you are viewing a list of audio recordings, playing an audio recording, or using the Setup menu.

Select [Camera] from the list of items. -or-

Press c

. -or-

Press

A

under Camera.

Managing Memory

To view your used memory, free memory, and memory capacity:

1 Access the media center. -or-

Scroll to or select any item in the media center.

2 Press m

.


To free memory, delete items in the media center.

Note: Items in the media center are stored in your phone using the same memory space used to store messages, Java application data, and voice records created when your phone is in a call.

Deleting some of these other items frees memory for media.

83

Digital Rights Management

Digital Rights

Management

When you download multimedia content available online, such as audio, images, or Java applications, these items may be subject to DRM restrictions. DRM, or digital rights management, is a system that defines how copyrighted multimedia content can be distributed and used.

DRM sets items to time-based or count-based usage settings. Time-based settings let you use the given item for a specified interval. Examples of time-based settings include being able to use an item for a specified number of days from the date of purchase, a specified number of days from the date that the item is first used, or a specified number of minutes. Count-based settings let you use an item for a specified number of times after you download it or for unlimited use.

Installing Items

Except for DRM Java applications, DRM items will automatically install once they have finished downloading.

To install DRM Java applications, see “Installing

Applications” on page 102.

To send the DRM installation to the background, press e

.

Understanding DRM Status

Icons

Depending on how a given third-party vendor has set rights for an item, the item may include the following status icons: c The item is a DRM item.

e The DRM item has expired.

As with other items in media center, you can lock

DRM items. See “Locking Items” on page 82.

Note: All DRM items are forward locked. See

“Forward Locked Items” on page 79.

Sharing Items

Note: These features may not be offered by


You can gift a DRM item to a friend’s phone. Gifting is when you purchase a copy of a DRM item and send it to someone. If you do not want to gift an item, you can send a message to a friend’s phone

84

that contains the link for purchasing the item. The friend can then purchase the item quickly and easily. Sending this type of message is called

Tell-A-Friend.

Gifting

To check if a DRM item is giftable:

1 Go to the location on your phone that contains the item you want.

2 Highlight the DRM item you want to gift.

3 Press m

. If Gift is an option, the item is giftable.

To gift a DRM item:


2 Highlight the DRM item you want to gift.

3 Press m

.

4 Select Gift.

5 Select the contact you want to send the item to.

-or-

If the person you want to send the item to is not in Contacts, select [New Number]. Enter the number.

6 Press

O

.

7 Follow the vendor’s instructions for purchasing an additional license.

Managing DRM Items

Tell-A-Friend


2 Highlight the DRM item you want to tell your friend about.

3 Press m

.

4 Select Tell-A-Friend.

The Create Message screen opens.

5 Complete and send the message. See “Creating and Sending Messages” on page 68.

Managing DRM Items

Note: Depending on how the third-party vendor has set rights for the given DRM item, you may be unable to perform some of the following tasks.

Viewing License Information

You can check a DRM item’s license to view the following information:

• For time-based items, either the date and time the item is scheduled to expire, or the number of days left

• For count-based items, the number of credits

(uses) left or an unlimited use notice

85

Digital Rights Management

• The name of the item’s vendor

To view the license of a DRM item:


2 Highlight the DRM item you want to view license information for.

3 Press m

.

4 Select License Info.

Renewing DRM Licenses

Note: You can only renew DRM licenses if the license contains a link to the page where you purchased the item.


2 Highlight the DRM item you want to renew.

3 Press A under Renew or press m . Select

Renew.

4 Select the link to the page where you purchased the item.

5 Follow the vendor’s instructions for purchasing an additional license.

Deleting Items

If you delete a DRM item that you purchased from

SouthernLINC Wireless from your phone, you will have to purchase it again to download it.

Under certain conditions, third-party vendors will let you download an item multiple times within a given time frame, even if you deleted the item. Please contact the third-party vendor of an item to learn more about the vendor’s download regulations.

To delete an item:


2 Highlight the DRM item you want to delete.

3 Press m

.


5 If prompted, press

A

under Yes.

About Expired Items

If you are using an item when it expires, once you finish your session with the item, you will be unable to use the item.

86

When ring tones and wallpapers expire, they are automatically removed from their respective lists.

For expired items that continue to display in their respective lists, you can either choose to renew the license for the item or else manually delete the item.

Note: You cannot delete locked items.

Managing DRM Items

87

Using LINC View

Note: LINC View requires a subscription. Please contact your sales representative or

SouthernLINC Wireless at

1-800-406-0151 for more information.

LINC View lets you exchange pictures, My Info, and contact information with other phones that have this capability. You do this through

InstantLINC Mobile to Mobile calls.

LINC View cannot be used during group calls.

Sending a Picture

When you send a picture using LINC View, the picture you sent appears on the display of the phone you are engaged in the InstantLINC Mobile to Mobile call with and is saved to that phone’s media center.

Sending a Picture During a Call

You can send a picture at any time during an

InstantLINC Mobile to Mobile call, whether you made or received the call*.

* Additional charges may apply.

You cannot talk or listen on an InstantLINC Mobile to Mobile call while a picture is being transmitted.

Other activities, such as taking or searching for a picture, do not prevent you from talking or listening.

Taking a Picture to Send

Note: For more information on taking pictures,

see “Taking Pictures” on page 73.

1 While in an InstantLINC Mobile to Mobile call, press c

or press

A

under Camera.

2 When the picture you want to capture is in view, press c

or press

O

or press

A

under Capture.

3 To save the picture so you can send it, press c or press

O

or press m

and select Save [OK].

-or-

To discard the picture without sending it, press

A

under Discard. Repeat step 2 until you

capture a picture you want to send.

4 Press the PTT button to send the picture.

5 Wait while the picture is transmitted. The

InstantLINC Mobile to Mobile call is temporarily interrupted while a picture is transmitted.

6 When prompted, press the PTT button to resume the InstantLINC Mobile to Mobile call.

Sending a Stored Picture

1 While in an InstantLINC Mobile to Mobile call:

Press m

. Select Browse Pictures.

88

A list of pictures that can be included in an

InstantLINC Mobile to Mobile call appears.

2 Select the picture you want to send.





Starting a Call by Sending a Picture

You can start an InstantLINC Mobile to Mobile call after you capture a picture with the camera or by choosing a stored picture from the media center.

To do this, you must have the LINC ID and IP address of the person you want to send to stored in your Contacts.

1 Capture a picture with the camera. See “Taking

Pictures” on page 73. -or-

From the media center, scroll to or select the picture you want to send in an InstantLINC

Mobile to Mobile call.

2 Press m

and select LINC View Picture.

A list of names from Contacts appears. These names have LINC IDs and IP addresses stored.

Receiving a Picture

3 Select the name of the person you want to send the picture to.





Receiving a Picture

When someone sends you a picture using LINC

View, your phone emits tone or vibrates and a message appears on the display asking you if you want to accept the picture.

When you receive a picture, it appears every time you are in an InstantLINC Mobile to Mobile call with the person who sent it unless you delete the picture from the media center. This occurs for the last 20 people who sent you pictures.

Accepting a Picture

1 When you see the message asking you if you want to accept the picture, press

A

under Yes.



89

Using LINC View


Tip: If you want to stop the transmission before it is finished, press A under Cancel.

Declining a Picture

When you see the message asking you if you want to accept the picture, press A under No.

The picture is not transmitted.

Setting Picture Capability

To turn your phone’s ability to send and receive pictures in InstantLINC Mobile to Mobile calls on or off:


InstantLINC > LINC View Picture.


This setting does not affect your phone’s ability to send and receive My Info or contact information.

Sending My Info and Contact

Information

When you send My Info or contact information using LINC View, the information you sent appears on the display of the phone you are engaged in the

InstantLINC Mobile to Mobile call with. After the call, the information appears on the recent call list of that phone.

Sending My Info

You can control what portion of the information in

My Info is sent and whether it is sent automatically in every InstantLINC Mobile to Mobile call or only

when you choose to send it. See “Setting Sending

Options” on page 94.

Tip: When you send My Info, certain information, such as your email address or fax number, cannot be included. To send complete contact information, create an entry for yourself in Contacts and send it.

Sending Information During a Call

1 While in an InstantLINC Mobile to Mobile call, press m

.

2 With LINC View My Info highlighted, press

O

.

3 When Ready to Send appears on the display, press the PTT button to send the information.

90

Starting a Call by Sending Information

1 From the main menu, select My Info.

2 Press m

.

3 With LINC View My Info highlighted, press

O

.

4 Use the keypad to enter the LINC ID you want to send the information to. -or-

Press

A




Sending Contact Information

You can send contact information by selecting a

Contacts entry or an item from the recent calls list.

Contacts entries that contain only addresses cannot be sent. When Contacts entries are received, they do not include ring tones or pictures.

These items from the recent calls list can be sent:

• Contact information sent from other phones

• Calls to or from numbers stored in your Contacts list

Sending Information During a Call

1 While in an InstantLINC Mobile to Mobile call, press m .

Sending My Info and Contact Information

2 Select Contacts or Recent Calls.

3 Scroll to the Contacts entry or item in the recent calls list you want to send.

4 Press m

.

5 Select LINC View Contact.

6 Press the PTT button to send the information.

Starting a Call by Sending Information

1 From Contacts or the recent calls list, scroll to or select the entry you want to send.

2 Press m

.

3 Select LINC View Contact.

4 Use the keypad to enter the LINC ID you want to send. -or-

Press

A




91

Using LINC View

Receiving My Info or Contact

Information

When you receive My Info or contact information from another phone, an icon appears on the display: j

My Info.

d

Contact information.

To view the information while still in the

InstantLINC Mobile to Mobile call:

1 Press m

.

2 Select View Contact.

You can also view My Info from other phones on

the recent calls list. See “Recent Calls” on page 31.

92

My Info

My Info lets you view information about your phone. Depending on SouthernLINC Wireless, you may also be able to send this information to other phones.

Viewing My Info


2 Scroll to see the entire screen.

The My Info screen contains:

• My Name — You can enter your name here.

• Line 1 and Line 2 — your phone numbers for phone lines 1 and 2. Each number appears when you receive your first call on that line.

• LINC ID — Your LINC ID is the number that others use to contact you using InstantLINC

Mobile to Mobile calls. This number appears when you receive your first InstantLINC Mobile to Mobile call.

• Group ID — the number of the Talkgroup you have joined.

• Carrier IP — the IP address assigned to

SouthernLINC Wireless. This number appears when you register for packet data services.

• IP1 Address and IP2 Address — the IP addresses you use to access the Internet with your phone.

• Circuit Data — the number you use if you want to use your phone to transfer circuit data. See

“Using Your Phone as a Modem” on page 53.

You receive this number from SouthernLINC

Wireless.

Note: If you request equipment-related transactions on your account,

SouthernLINC Wireless may require you to provide specific information about your phone. By pressing m

anytime while in My

Info, a submenu will appear that includes your phone's service status, unit information, and phone identification numbers including IMEI, SIM ID, and

Serial Number (SN). Please be prepared to supply the representative with this information when requesting these types of transactions.

Editing My Info

To edit My Info to enter or change the text that appears in My Name:


2 Press

A

under Edit.

3 Select Name.

93

My Info

4 Enter the name you want to appear. See

“Entering Text” on page 62. When you are

finished, press

O

.

You can also edit the information in Line 1, Line 2, and Circuit Data, but your changes are only temporary. The next time your phone registers on the network, your actual phone numbers and circuit data number appear again in My Info.

Setting Sending Options

Note: This feature requires a subscription.

Check with your SouthernLINC Wireless sales representative.

Your phone can send information in My Info to other phones that have this capability.

You can control what portion of the information in

My Info is sent and whether it is sent automatically in every InstantLINC Mobile to Mobile call or only when you choose to send it.

Information Sent

The information your phone sends always includes

My Name and LINC ID.

Line 1, Line 2, Carrier IP, and Circuit Data may also be sent, depending on the options provided by

SouthernLINC Wireless and how you set your sending options.

94

To change which fields are sent:


2 Press m

.

3 Select LINC View Setup > Info to Send.

4 A checkmark appears next to the fields that will be sent. To add or remove the checkmark, select the field.


A

under Done.

Automatic Sending

To control whether your information is sent automatically:


2 Press m

.

3 Select LINC View Setup > Auto Send.

4 To set your information to be sent automatically, set this option to On. -or-

To set your information to be sent only when you choose to send it, set this option to Off.

Datebook

Datebook stores up to 250 events. You can store events over a 13 month period — 12 months after and 1 month before the current date.

A Datebook event contains:

• A subject — A name you assign to the event.

You can also enter a phone number, LINC ID, or

Talkgroup number here. After the event is stored, you can call this number from Datebook or when you get a reminder of this event.

• A location — The location of the event. You can also enter a phone number, LINC ID, or

Talkgroup number here. After the event is stored, you can call this number from Datebook or when you get a reminder of this event.

• A start time — The start time automatically assigned to an event is the beginning of the day.

You can change the start time, or assign no start time, before storing the event.

• A duration — The length of time the event lasts.

• A date — The date automatically assigned to an event is the date that was highlighted or selected when you began creating the event.

You can change this date before storing the event.

• A repeat — lets you store the event as a recurring event.

• A reminder — If an event has a start time, you can set Datebook to remind you that the event is going to start.

• a ring tone for the reminder

• a profile that your phone is switched to while the event is occurring

• a Java application that starts when the event starts

Only the subject and date are required.

Viewing Datebook

To access Datebook:

From the main menu, select Datebook.

You can view Datebook by the day, by the week, or by the month. You can also view the details of any event.

In day view, brief information about each event for that day appears.

In week view, events appear as markers corresponding to their times.

In month view, days with events appear with a marker in the corner.

95

Datebook

To view an event:

1 Select the day the event occurs.

2 Select the event.

To change the current view:

1 While viewing Datebook, press m

.

2 Select the view you want.

Navigating Datebook

To scroll through Datebook:

Scroll left and right using the navigation key. -or-

In week view and month view, press

*

or

#

.

To see more in day view:

Scroll up and down using the navigation key.

To highlight a day in month view:

Enter the date using the keypad.

To go to today’s date:


.

2 Select Go To Today.

To go to any date in Datebook:


.

2 Select Go To Date.

3 Select the date you want.

96

Creating Events

Every Datebook event must have a subject and be stored to a date. Other information is optional.

You may enter the information in any order by scrolling through the event details.

After you have entered the information you want, you can press

A

under Done to store the event to

Datebook.

If you decide you do not want to store the event:

Press

A

under Cancel.

To create a Datebook event:

1 While viewing Datebook, press

A

under New.

-or-

In day view, select [New Event].

2 To assign a subject to the event:

Select Subject.

Enter the name. -or-

Press

A

under Browse to choose from common event names. -or-

Enter a phone number, LINC ID, or Talkgroup number. After the event is stored, you can call this number.


O

.

3 If you want to assign a location to the event:

Select Location.

Enter the location. -or-

Enter a phone number, LINC ID, or Talkgroup number. After the event is stored, you can call this number.


O

.

4 The start time automatically assigned to an event is the beginning of the day. If you want to change the start time or assign no start time:

Select Start.

Enter the start time you want. -or-

Press

A

under No Time to assign no start time.

5 If you want to assign a duration to the event:

Select Duration.

Select the duration you want. -or-

Select Custom to enter a duration.

6 The date automatically assigned to an event is the date that was highlighted or selected when you began creating the event.

To change the date of the event:

Select Date.

Creating Events

Enter the date you want.

7 If you want to make the event a recurring event:

Select Repeat.

Select the repeat cycle you want.

If the event occurs more than once a week:

Select Multiple Day. Select the days you want.

Press

A

under Done.

Select End. Select the date you want this event to stop recurring.

8 If you want to create a reminder for this event:

Select Reminder.

Select the reminder time you want. -or-

Select Custom to enter a reminder time.

Note: If an event has no start time, you cannot create a reminder for it.

9 If you have entered all the information you want for this event, press

A

under Done. -or-

If you want to assign a ring tone, a profile, or a

Java application to the event, see “Assigning

More Options” on page 98.

97

Datebook

Assigning More Options

To assign more options before storing an event:

1 If you have created a reminder for the event and want to set the ring tone for that reminder:

Select Ring Tone.

Select the ring tone you want from the ring tones stored in your phone.

2 If you want to assign a profile that your phone is switched to while the event is occurring:

Select Profile.

Select the profile you want from the profiles stored in your phone.

Your phone switches to this profile when the event starts and switches back to the previous profile when the event ends.

3 If you want to assign a Java application to start when the event starts:

Select App.

Select the application you want from the Java applications stored in your phone.

If you created a reminder for this event, your phone prompts you to start the Java application when you get the reminder.

Editing Events

To change the details of an event:


2 Select the event.

3 Press

A

under Edit.

4 Follow the applicable instructions in “Creating

Events” on page 96 to edit the various fields.

To copy an event to another date:


2 Select the event.

3 Press m

.

4 Select Copy.

5 Press

A


6 Enter the date you want.

7 Press

O

.

8 If you want to change more information, follow

the applicable instructions in “Creating Events” on page 96 to edit the various fields.

Deleting Events


2 Select the event.

3 Press m

.


98

5 If the event is not a recurring event, press

O

or press

A

under Yes to confirm. -or-

If the event is a recurring event:

Select This Event Only to delete only the event

selected in step 2.

Select Repeat Event to delete all occurrences of the event.

Receiving Reminders

If you created a reminder for a Datebook event, when the reminder time occurs, your phone notifies you with text on the display and a reminder tone.

To view more details about the event:

Open the flip. -or-

Press

A

under View.

To dismiss the reminder:


. -or-


O

, press

A

under

Dismiss, or close the flip.

Receiving Reminders

For Events with Java Applications

If you assigned a Java application to start when the event starts, you can start the application when you get the reminder.

1 Press m

.

2 Select Launch.

Making Calls From Datebook and Datebook Reminders

If you stored a phone number, LINC ID, or

Talkgroup number in the Subject or Location field of a Datebook event, you can call or send a call alert to that number from Datebook or from the reminder of that event.

If you store numbers in both the Subject and

Location fields, you can call or send a call alert to the number stored in Subject and the number stored in Location as long as the number stored in

Subject is a LINC ID or Talkgroup number and the number stored in Location is a phone number.

If both are the same type of number, the number in

Subject is called or sent a call alert. To call or send a call alert to the number stored in Location, you must delete the number stored in Subject.

99

Datebook

Making Calls from Datebook

To make a phone call:

1 Highlight or select the event containing the number you want to call.

2 Press s

. -or-

Press m

. Select Call # in Event.

To make an InstantLINC Mobile to Mobile or

Talkgroup call:

1 Highlight or select the event containing the number you want to call.

2 Press and hold the PTT button on the side of your phone. -or-

If you did not include a # before the Talkgroup you want to call: Press m

. Select Talkgroup.


To send a call alert:

1 Highlight or select the event containing the number you want to call or send a call alert to.

2 Press m

. Select Alert # in Event. Press the PTT button.

Making Calls from Datebook

Reminders

To call a number:

100

Press s

. -or-

Press m

. Select Call # in Event.

To make InstantLINC Mobile to Mobile calls or

Talkgroup calls:

Press the PTT button. -or-

If you did not include a # before the Talkgroup you want to call: Press m

. Select Talkgroup.


To send a call alert:

Press m

. Select Alert # in Event. Press the PTT button.

Customizing Datebook Setup

To access Datebook set up options:

1 From the main menu, select Datebook.

2 Press m

.

3 Select Setup.

You can view or change these options:

• Start View — sets Datebook to start in day view, week view, or month view when you access

Datebook.

• Daily Begin — sets the beginning of your day.

This is the earliest time of day displayed in week view, if you have a 12-hour day view.

• Delete After — sets the amount of time

Datebook waits to delete an event after it occurs.

• Time Shift — lets you shift the times of all

Datebook events. This is useful if you are traveling to a different time zone.

• Alert Timeout — sets the amount of time a tone continues to sound when you receive a message notification, call alert, or Datebook reminder.

• Clock — controls whether the time and date appear on the idle screen; sets time and date format; sets year.

Customizing Datebook Setup

101

Java Applications

Your phone arrives with Java applications preloaded. These preloaded applications autoinstall the first time you open them.

You can download and install more Java applications.

Note: Using Java applications may cause your phone to use up more battery power than other uses of your phone.

Installing Applications

1 From the main menu, select Java Apps.

2 Select the application or suite of applications you want to install.

Installation messages appear as the application installs.

3 If you want to create a shortcut to the Java application on the main menu: Press

A

under

Next. Press

A

under Yes. Press

O

.

4 Press

A

under Done.

Running Applications

To run an application that has a shortcut on the main menu:

1 From the main menu, select the application or suite of applications you want to run.

2 If you have selected a suite of applications, select the application you want to run.

To run an application that does not have a shortcut on the main menu:


2 Select the application or suite of applications you want to run.

3 If you have selected a suite of applications, select the application you want to run.

Tip: If you do not hear the sounds associated with the Java application, select Settings >

Volume and check the volumes of Java

Speaker and Java Earpiece.

Suspending Applications

When you suspend an application, it does not stop running. It goes to the background so that you can run another application in the foreground.

To suspend an application:

Press e

or close the flip.

102

To view your suspended applications:

From the Java menu, select Suspended Apps.

You can have up to 3 applications running at one time — 1 running in the foreground and 2 in the background.

Resuming Applications

You can resume a suspended application at any time. This brings it to the foreground.

1 From the Java menu, select Suspended Apps.

2 Select the application you want to resume.

Ending Applications

To end an application:


2 If the application you want to end is part of a suite of applications, select the suite.

3 Scroll to the application you want to end.

Press

A

under End. -or-

If End is not one of your options: Press m

.

Select End.

Tip: You can also end applications from the

Suspended Apps screen.

Resuming Applications

To end all applications:


2 Scroll to Suspended Apps.

3 Press m

.

4 Select End All.

5 Press

O

or press

A


6 If you want to end all applications without letting them exit, press

A

under EndNow.

Downloading Applications

If you want to run more Java applications, you can download them into your phone.

Go to www.southernlinc.com/downloads for a selection of Java applications and downloading instructions.

About DRM Java Applications

Your phone supports gifting and Tell-A-Friend services for DRM Java applications. However, these services may not be offered by

SouthernLINC Wireless. Please contact

SouthernLINC Wireless for more information about these services.

For more information about DRM items, see

“Digital Rights Management” on page 84.

103

Java Applications

Deleting Applications

Note: Under certain conditions, some DRM vendors will not charge you if you download an item multiple times within a given time frame. Please contact the DRM vendor to learn more about their download regulations.

To delete an application:


2 Scroll to the application you want to delete.

3 Press m

.

4 Select Deinstall.

5 Press

O

or press

A


6 When your phone has finished deleting the application, press

A

under Done.

To delete all Java applications:


2 Scroll to Java System.

3 Press m

.


5 Press

O

or press

A


Managing Memory

To view the amount of memory available for Java applications:

1 From the main menu, select Java Apps > Java

System.

2 Press

A

under Next.

3 To see more memory information, press

A under Next again.

Deleting Java applications frees memory.

Note: Java application data is stored in your phone using the same memory space used to store messages, voice records, pictures, ring tones, and wallpaper images. Deleting some of these other items frees memory for Java applications.

Shortcuts on the Main Menu

When you install an application, you can create a shortcut to the application on the main menu.

To create a shortcut to an application that is already installed:


Personalize > Menu Options > Add/Remove

Apps. -or-

104

From the main menu: Press m

. Select Main

Menu Setup > Add/Remove Apps.

2 Scroll to view the list of Java applications. Any application that has a shortcut on the main menu has a checkmark next to it.

3 Scroll to the application you want to create a shortcut for.

4 Press

O

.

5 Press

A

under Done.

To remove a shortcut:


Personalize > Menu Options > Add/Remove

Apps. -or-


. Select Main

Menu Setup > Add/Remove Apps.

2 Scroll to view the list of Java applications. Any application that has a shortcut on the main menu has a checkmark next to it.

3 Scroll to the application you want to remove the shortcut for.

4 Press

O

.

5 Press

A

under Done.

Java Applications and GPS Enabled

Java Applications and GPS

Enabled

Some Java applications can make use of your phone’s GPS feature to determine the approximate

geographical location of your phone. (See “GPS

Enabled” on page 108 for more information on the

GPS feature.) However, for privacy reasons, you may not always want Java applications to access the location of your phone. Your phone protects your privacy by giving you the option to block all or some Java applications from accessing the location of your phone.

Setting Privacy for All Java

Applications

These options control the privacy of all Java applications on your phone:

• Restricted — No Java or similar software applications may access the location of your phone. However, location information may still be available to the phone’s owner, fleet manager, or account administrator.

• Unrestricted — All Java applications may access the location of your phone, without notifying you.

105

Java Applications

• By Permission — When a Java application attempts to access the location of your phone, you are prompted to give permission. However, location information may still be available to the phone’s owner, fleet manager, or account administrator.

See “Setting Privacy Options” on page 113 for

information on choosing these options.

Granting or Denying Permission

If you choose By Permission, you must grant or deny each Java application access to the location of your phone when the application requests access for the first time. You may be required to grant or deny subsequent requests from the same application, depending on the privacy setting you choose for the individual Java application (see

“Setting Privacy for Each Java Application” on page 107).

When a Java application requests access to the location of your phone, a screen appears informing you.

To deny this request:

1 Press

A

under Deny. The application does not access the location of your phone.

2 Select the denying option you want:

• Always — If the application requests access to the location of your phone again, the request is denied without notifying you.

• For this session — If the application requests access to the location of your phone again before you power off your phone, the request is denied without notifying you.

• Only Once — If the application requests access to the location of your phone again, you are prompted to grant or deny permission.

To grant this request:

1 Press

A

under Grant. The application accesses your phone’s location.

2 Select the granting option you want:

• Always — If the application requests access to the location of your phone again, the request is granted without notifying you.

• For this session — If the application requests access to the location of your phone again before you power off your phone, the request is granted without notifying you.

• Only Once — If the application requests access to the location of your phone again, you are prompted to grant or deny permission.

106

Setting Privacy for Each Java

Application

After a given Java application requests access to the location of your phone for the first time, you have the opportunity to set the GPS privacy options for that Java application.


2 Scroll to the application or suite of applications you want to set the privacy options for.

3 Press m

.

4 Select Permissions.

5 Select the privacy options you want for this application:

• Always — The application always has permission to access the location of your phone, without notifying you.

• Ask — When the application requests access to the location of your phone, you are prompted to grant or deny permission (see

“Granting or Denying Permission” on page

106).

• Never — When the application requests access to the location of your phone, the request is denied without notifying you.

Java Applications and GPS Enabled

107

GPS Enabled

Your phone’s GPS Enabled feature uses information from Global Positioning System (GPS) satellites orbiting the Earth to determine the approximate geographical location of your phone, expressed as latitude and longitude. The availability and accuracy of this location information (and the amount of time that it takes to calculate it) will vary depending on the environment in which you are using the GPS feature. For example, GPS location fixes are often difficult to obtain indoors, in covered locations, between high buildings, or in other situations where you have not established a clear broad view of the sky. Also, nearby radio and electronic equipment may block or interfere with reception from these distant

satellites. SEE: “IMPORTANT: Things to Keep in

Mind”.

When you make a 911 emergency call, the GPS feature of your phone can help emergency personnel locate you if your phone has adequate access to GPS satellite signals and your emergency response center is equipped to process such information.

You can also use the GPS feature to view your approximate location. Location information appears on the phone’s display.

108

Java applications loaded on your phone can also request your location. If your phone is connected to a laptop computer or similar device, software running on that device can request your location.

To protect your privacy, you can control whether these requests are granted.

IMPORTANT: Things to Keep in Mind

If you are using the GPS feature of your phone while driving, please give full attention to driving and to the road.

Where adequate signals from multiple satellites

are not available (usually because your GPS antenna cannot establish a view of a wide area of open sky), the GPS feature of your phone WILL

NOT WORK. Such situations include but are not limited to:

• In underground locations

• Inside of buildings, trains, or other covered vehicles

• Under any other metal or concrete roof or structure

• Between tall buildings or under dense tree-cover

• Near a powerful radio or television tower

• Some radios, entertainment equipment and other electronic devices may generate signals that can block or interfere with the

GPS receiver ability to receive the distant satellite signals, particularly when such devices are operating in close proximity to the GPS receiver. Therefore, in a 911 call, or when otherwise using the GPS location function, always move your phone away from any such devices.

• When your GPS antenna is covered (for example, by your hand or other object) or facing the ground

• In temperature extremes outside the operating limits of your phone

Walking or driving very slowly may also substantially reduce GPS performance.

Even where location information can be calculated in such situations, it may take much longer to do so, and your location estimate may not be as accurate. Therefore, in any 911 call, always report the location to the emergency response center if you can and if you cannot, remain on your phone for as long as the emergency response center instructs you.

IMPORTANT: Things to Keep in Mind

Even where adequate signals from multiple satellites are available, your GPS feature will only provide an approximate location, often within 150 feet (45 meters) but sometimes much further from your actual location. Advice on how to improve GPS performance is

provided in “Enhancing GPS Performance” on page 112.

While the GPS feature of your phone can be a valuable navigational aid, it does not replace the need for careful navigating and good judgment.

Never rely solely on one device for navigation.

Remember that the accuracy of the location information and the time needed to obtain it will vary depending on circumstances, particularly the ability to receive signals from adequate numbers of satellites.

On emergency calls, your phone uses assistance information from the phone network to improve the speed and accuracy of your phone’s location calculation: if such assistance information becomes unavailable, it may reduce the speed and accuracy of the location calculation.

109

GPS Enabled

The satellites used by the GPS feature of your phone are controlled by the U.S. government and are subject to changes implemented in accordance with the Department of Defense GPS user policy and the Federal Radionavigation Plan. These changes may affect the performance of the GPS feature of your phone.

Making an Emergency Call

Dial 911 to be connected to an emergency response center. If you are on an active call, you must end it before calling 911.

When you make an emergency 911 call, the GPS feature of your phone begins to seek information to calculate your approximate location. It will take the GPS feature of your phone some time to

determine your approximate location. Even where your phone has good access to sufficient

GPS satellite signals and network assist data, it may take 30 seconds or more to determine the approximate location. This time will increase where there is reduced access to satellite signals. When your approximate location is determined, it is made available to the appropriate emergency response center.

In some cases, your local 911 emergency response center may not be equipped to

receive GPS location information. For this reason, and because the GPS location information reported is only approximate or may not be

available in your location (see “IMPORTANT:

Things to Keep in Mind” on page 108), always

report your location to the 911 operator you speak to when making an emergency call, if able, just as you would when using a phone without GPS capabilities.

Note: If you are concerned about whether your local 911 emergency response center is equipped to receive GPS location information, contact your local authorities.

In general, if your phone has access to signals from more GPS satellites, your location will be determined faster and more accurately than if your phone has access to signals from fewer GPS satellites.

If your phone does not have adequate access to

GPS satellites signals, the location of the nearest cell tower in contact with your phone is automatically made available to the emergency response center, if the center has the capability to receive such information.

110

See “Enhancing GPS Performance” on page 112

for information on how to help your phone determine your location.

Viewing Your Approximate

Location

1 From the main menu, select GPS > Position.

2 Scroll to view the entire screen.

This displays the following information about the last time your location was calculated:

• The time (as Greenwich Mean Time) and date that the location was last calculated

• The approximate location, expressed as latitude and longitude

• The estimated accuracy of the calculated location. This estimate of accuracy is only a very rough estimate and may vary substantially from the actual accuracy of the approximate location information reported.

• The number of satellites used to calculate the location. In general, more satellites make for better accuracy.

To calculate your location again:

Press

A

under Refresh.

Viewing Your Approximate Location

It may take your phone several minutes to complete the process of determining your location.

During this time, a message usually appears on your phone’s display saying your phone is scanning for satellites. For tips on getting the best

location calculation, see “Enhancing GPS

Performance” on page 112.

The Position screen displays the updated information.

To cancel a location calculation before it is completed:

Press

A

under Cancel to return to the Position screen. -or-

Press e


Each time approximate location of your phone is calculated, the latest location information is stored in your phone and remains there even when your phone is powered off. You will see this information the next time you view the Position screen.

If you received a phone call or alert while attempting to determine your location, the Position screen will disappear, but your phone will continue attempting to determine its location. If it is successful, the new location information will be displayed the next time you view the Position screen.

111

GPS Enabled

Enhancing GPS Performance

Sometimes the GPS feature of your phone may be unable to complete a location calculation successfully. If this happens when you are making an emergency call, the location of the nearest cell tower in contact with your phone is made available to the appropriate emergency response center if the center has the capability to receive such information. If this happens when you are trying to view your location on the phone’s display, you will see a message indicating that your phone cannot access satellites.

To improve accuracy and increase your chances of a successful calculation, do the following while your phone is determining your approximate location:

• Stay in the open. The GPS feature works best where there is nothing between your phone and a large amount of open sky. If possible, go outside, away from tall buildings and foliage.

While performance in a building is improved by moving closer to windows, glass with certain sun shielding films may block satellite signals.

• Extend your phone antenna.

• Hold your phone to enhance reception. Signals from GPS satellites are transmitted to your GPS antenna, which is in your phone antenna. Hold your phone away from your body, giving the antenna clear access to satellite signals. Do not cover the antenna area with your fingers or anything else.

p c

GPS antenna

112

• Move away from electronic devices. Radios, entertainment devices, and other electronic devices may generate interfering signals that may prevent GPS receiver operation if they are in close proximity to the phone. Move your phone away from such devices when using the

GPS-Enabled feature.

• Stand still. If possible, stand still until your phone is finished determining your location. Moving your phone at a walking pace while your phone is calculating your approximate location may substantially decrease GPS performance.

• In a car. When using the GPS Enabled feature in a car, position your phone so that the GPS antenna has good access to GPS signals through the car’s windows. Typically, the GPS antenna has best access to GPS signals in a car when placed near a window.

Note: Although moving your phone at a walking pace decreases GPS performance, moving it at the speed of a moving car does not.

• Stay in SouthernLINC Wireless network coverage. The SouthernLINC Wireless network will provide your phone with information that helps determine your location more quickly and accurately.

Setting Privacy Options

Setting Privacy Options

Your phone’s GPS privacy options control whether

Java applications on your phone or other software applications may view the location of your phone.You may set your phone to one of these

GPS privacy options.

Note: Privacy options do not apply to the transmission of location information during emergency 911 calls.

To set your GPS privacy options:

1 From the main menu, select GPS > Privacy.

2 If your GPS PIN security feature is enabled,

enter your GPS PIN. (See “Setting the GPS PIN

Security Feature” on page 114 for more

information.)

3 Select the privacy option you want:

• Restricted — No Java or similar software applications may view the location of your phone. However, location information may still be available to the phone’s owner, fleet manager, or account administrator.

• Unrestricted — All applications may view the location of your phone, without notifying you.

113

GPS Enabled

• By Permission — When an application attempts to view the location of your phone, you will be prompted to give permission.

However, location information may still be available to the phone’s owner, fleet manager, or account administrator.

Setting the GPS PIN Security Feature

To prevent your GPS privacy settings from being altered without your knowledge, your GPS privacy option can be protected by a PIN.

When you receive your phone, the GPS security feature is turned off, so you do not have to enter a

GPS PIN to access your GPS privacy options. If you turn this feature on, you will be required to enter a GPS PIN to access your GPS privacy options.

To turn the GPS Enabled security feature on or off:


Security > GPS PIN.


3 Enter the current GPS PIN.

Note: When you receive your phone, your GPS

PIN is 0000.

4 Press A under Ok.

To change your GPS PIN:


Security > Change Passwords > GPS PIN.

2 Enter the current GPS PIN.

Note: When you receive your phone, your GPS

PIN is 0000.

3 Press

A

under Ok.

4 Enter the new 4- to 8-digit GPS PIN.

5 Press A under Ok.

6 Enter the new 4- to 8-digit GPS PIN to confirm.

7 Press

A

under Ok.

Using GPS with Map Software

You can use the GPS feature of your phone to provide approximate location data to a laptop computer or similar device that is running interactive map software such as that made by

DeLorme or Microsoft. This way, if your phone has good access to GPS signals, your approximate position on a map can be made available as you travel in a vehicle.

To do this, connect your phone to your laptop (or other device) with a data cable and set your phone

to transmit data (see “Getting Started” on page

115). Your phone then provides your approximate

location to the device running the map software,

114

which displays your location on a map. Your phone provides an updated location every second and the map software displays your changing location on its map.

See “Enhancing GPS Performance” on page 112

for more details on obtaining good location information.

Note: Because your phone is continuously determining your location, using the GPS feature of your phone with map software uses the phone’s battery power quickly.

Software Compatibility

Your phone sends location information to your laptop or other device using the standard National

Marine Electronics Association (NMEA) format.

Your phone supports output messages in

NMEA-0183 format and supports the following

NMEA-0183 sentences: GGA, GLL, GSA, GSV,

RMC, and VTG.

The map software running on your laptop or other device must support NMEA 3.0.

Using GPS with Map Software

Getting Started

To connect your phone to your laptop or other device:


connector cover

115

GPS Enabled

2 With the phone’s display facing up, insert the data cable’s connector into the accessory connector, until you hear a click.

• Stop bits: 1

• Flow control: Hardware

To set your phone to send location information to your laptop or other device:

1 From the main menu, select GPS > Interface.

2 Set NMEA OUT to On.

Your phone is now sending location data to your laptop or other device.

To stop your phone from sending location data to your laptop or other device:

Set NMEA OUT to Off.

Each time you power your phone on, NMEA OUT is automatically set to Off.

3 Insert the data plug into the COM port of your laptop or other device.

Make sure no other application is using the COM port selected.

Make sure the COM port settings of your laptop or other device are set to the following:

• Bits per second: 4800

• Data bits: 8

• Parity: None

116

Voice Records

A voice record is a recording you make with your phone and can play back. You can record notes to yourself when your phone is not in a call or record phone calls when your phone is in a call.

Voice records created when your phone is not in a call can be accessed through the media center.

Viewing Voice Records

To view your list of voice records:

1 From the main menu, select VoiceRecord.

2 Scroll to view more voice records.

Voice Records Icons

One of these icons appears next to each voice record: c

A voice record made while your phone was not in a call.

v

A voice record made while your phone was in a call.

Filtering by Voice Record Type

You can set your phone to show all voice records, only voice records created when your phone was in a call, or only voice records created when your phone was not in a call.


2 Press m

.



• All — show all voice records.

• In Call — show only voice records created when your phone was in a call.

• Standard — show only voice records created when your phone was not in a call.

Tip: You can also press

*

or

#

to scroll through these options while viewing the list of voice records.

Creating Voice Records

Phone Not in a Call

To record a note to yourself:

1 From the main menu, select VoiceRecord >

[New VoiceRec].

117

Voice Records

2 Say the message you want to record into the microphone.

3 When you are finished recording, press

O

.

Phone in a Call

To record a phone call:

1 While on an active call, press m

.

2 Select Record.

3 To stop recording and discard the voice record at any time, press

A

under Cancel.

4 When you are finished recording, press

O

.

Note: Recording of phone calls is subject to applicable laws regarding privacy and recording of phone conversations.

Playing Voice Records


2 Select the voice record you want to play.

3 To stop the voice record while it is playing, press

O

.

Labeling Voice Records

When you create a voice record, it is labeled with the time and date it was recorded. You can then rename it with a custom label.


2 Scroll to the voice record you want to label.

3 Press

A

under Label.

4 Enter the label you want to assign. See

“Entering Text” on page 62.

5 Press

O

.

Locking Voice Records

When you lock a voice record, it cannot be deleted until you unlock it.


2 Scroll to the voice record you want to lock or unlock.

3 Press m .

4 Select Lock to lock the message. -or-

Select Unlock to unlock the message.

When a voice record is locked, this icon

R

appears next to it.

118

Deleting Voice Records

Deleting a voice record from the voice record list deletes it from all parts of your phone, including the media center.

Deleting a Voice Record


2 Scroll to the unlocked voice record you want to delete.

3 Press m .


5 Press

O

or

A


Deleting All Voice Records


2 Scroll to any voice record.

3 Press m

.


5 Press

O

or

A


Managing Memory

To view the amount of memory available for voice records:


Deleting Voice Records

2 With [New VoiceRec] highlighted, press

A under Memory. -or-

With any voice record highlighted, press m

.

Select Memory.

To free memory by deleting all unlocked voice records:

1 From the voice records memory screen, press

A

under Delete.

2 Press

O

or

A


Note: Voice records are stored in your phone using the same memory space used to store messages, Java application data, and all items accessible through the media center. Deleting some of these other items frees memory for voice records.

119

Customizing Your Phone

Setting the Volume

Of the Earpiece and Speaker

1 From the main menu, select Settings > Volume.

2 Scroll to Earpiece to set the earpiece volume.

-or-

Scroll to Speaker to set the speaker volume.

3 To set the volume:

Scroll left or right. -or-

Press the volume controls.

Of the Ringer

Press the volume controls.

Setting Your Phone to Vibrate

To set your phone to vibrate instead of making a sound when you receive phone calls, InstantLINC

Mobile to Mobile calls, group calls, call alerts, message notifications, pictures sent using LINC

View, and Datebook reminders, see “Setting Your

Phone to Vibrate” on page 58.

To set your phone to vibrate instead of making a sound when you receive InstantLINC Mobile to

Mobile calls and group calls, even if you want your phone to ring for other features:


InstantLINC > Alert Type.

Tip: If Alert Type does not appear: From the main menu, select Ring Tones. Make sure

VibeAll is set to Off. Repeat step 1.

2 Select Vibrate to set your phone to vibrate.

Tip: Select Silent in step 2 to set your phone to

neither vibrate nor make a sound.

Changing the Look of Your

Phone

Wallpaper

A wallpaper is an image that appears on the idle screen.

Choosing a Wallpaper


Display/Info > Wallpaper > Wallpaper.

Note: If you do not see Wallpaper as an option, make sure Auto Cycle is set to Off.

2 Select the wallpaper you want.

120

Tip: If you want to see what the wallpaper looks like, scroll to the wallpaper you want to view and press

A

under View.

Setting Wallpaper to Change Automatically


Display/Info > Wallpaper > Auto Cycle.

2 Select how often you want the wallpaper to change.

3 Select Select Pictures.

4 Select the pictures you want to appear as wallpaper.

5 Press

A

under Done.

Setting Text Size

To set the size of the text on the internal display:


Display/Info > Text Size.


• Zoom — 11 characters per line

• Standard — 14 characters per line

• Compressed — 18 characters per line

To set your phone to briefly display very large digits when you enter numbers at the idle screen:


Display/Info > Large Dialing.

Changing the Look of Your Phone

2 Set this option to Large Digits.

Setting the Menu View

You can set the items on your main menu and Java applications menu to appear as large icons or a list:


Display/Info > Menu View. -or-


. Select Main

Menu Setup > Menu View.

2 To choose a list, select List View. -or-

To choose large icons, select Icon View.

Setting the Backlight

A backlight lights the display and keypad when you make or receive a call, open or close the flip, or press keys or buttons.

To control how long the backlight stays on:


Display/Info > Backlight > Timer.

2 Select the number of seconds you want the backlight to stay on.

121

Customizing Your Phone

To control how long the backlight stays on for Java applications:


Display/Info > Backlight > Java Timer.

2 Select the number of seconds you want the backlight to stay on for Java applications.

To set the keypad backlight to light up only in low light conditions:


Display/Info > Backlight > Sensor.


Airplane Mode—Temporarily

Turning Off Calls

Sometimes you may want to have your phone on, but turn off its ability to make and receive calls, such as when you are on an airplane.

To set your phone so that it cannot make or receive phone calls, InstantLINC Mobile to Mobile calls, or group calls; or transfer data:


Advanced > Airplane Mode.


This icon U appears.

Note: While powering on your phone, you can turn on Airplane mode by pressing p

for more than 5 seconds.

To restore your phone’s ability to do all these things:

Set this option to Off.

Using Settings

Settings contains many submenus that let you customize your phone.

For information on applying groups of settings to

your phone together, see “Profiles” on page 127.

Display/Info Features

The Display/Info menu controls how the keypad and display appear:

• Wallpaper — changes the wallpaper that appears on the idle screen.

• Text Size — sets the size of text on the display.

• Theme — changes the look of the display.

• Home Icons — controls whether main menu icons appear on the idle screen.

• Backlight — controls backlight illumination.

122

• Clock — controls whether the time and date appear on the idle screen; sets time and date format; sets year.

• Menu View — controls whether the items on your main menu and Java applications menu appear as large icons or a list.

• Large Dialing — sets large digits to appear on the idle screen when you enter a number.

• Language — sets the language that your phone displays.

Phone Calls Features

The Phone Calls menu controls how your phone handles phone calls:

• Set Line — sets phone line 1 or phone line 2 as the active line for outgoing calls.

• Any Key Ans — If this feature is on, you can answer calls by pressing any key on the keypad.

• Auto Redial — sets your phone to automatically redial calls you make when the system is busy.

• Call Waiting — See “Call Waiting” on page 48.

• Auto Ans — sets your phone to automatically answer an incoming call after a specified number of rings. When this feature is on, the phone answers by connecting you to the caller; it does not send the call to voice mail, unless you are out of coverage or on the line.

Using Settings

• Flip Activation — See “Setting Flip Actions” on page 51.

• Minute Beep — causes a beep to sound every minute of an active call.

• Call Duration — causes the duration of a call to appear on the display when the call ends.

• TTY — See “Making TTY Calls” on page 54.

• Notifications — See “Message Notifications” on page 65.

InstantLINC Mobile to Mobile

Features

The InstantLINC Mobile to Mobile menu controls how your phone handles InstantLINC Mobile to

Mobile calls and group calls:

• Tkgrp Silent — controls whether you hear group calls to your Talkgroup. See “Group Calls” on page 59.

• Tkgrp Area — lets you define your Talkgroup area.

• One Touch PTT — See “Setting Flip Actions” on page 51.

• Alert Type — controls how your phone notifies you when you receive InstantLINC Mobile to

Mobile calls and group calls.

123


• LINC View Picture— sets your phone’s ability to send and receive pictures in InstantLINC Mobile

to Mobile calls. See “Using LINC View” on page

88.

Personalize Features

The Personalize menu makes main menu items easier to access.

• Menu Options — Reorder Menu lets you change the order of the items on the main menu by grabbing and moving them; Add/Remove

Apps lets you create a shortcut to a Java application on the main menu.

• Up Key — sets the main menu item you access when you scroll up from the idle screen.

• Down Key — sets the main menu item you access when you scroll down from the idle screen.

• Left Key — sets the main menu item you access when you scroll left from the idle screen.

• Right Key — sets the main menu item you access when you scroll right from the idle screen.

• Center Key — sets the main menu item you access when you press

O

from the idle screen.

• Left Softkey — sets the main menu item you access when you press the left option key from the idle screen.

• Right Softkey — sets the main menu item you access when you press the right option key from the idle screen.

• Power Up — sets the main menu item you see when you power on your phone. To set the idle screen to be the first thing you see when you power on your phone, select Default Ready.

Volume Features

The Volume menu sets the volume of sounds your phone makes:

• Line 1 — sets ringer volume for phone line 1.

• Line 2 — sets ringer volume for phone line 2.

• Messages — sets the volume of message notifications and Datebook reminders.

• Earpiece — sets the volume of sound coming out of the earpiece.

• Speaker — sets the volume of sound coming out of the speaker.

• Keypad — sets the volume of sound associated with pressing keys and buttons.

124

• Java Earpiece — sets the volume of sound associated with Java applications coming out of the earpiece.

• Java Speaker —sets the volume of sound associated with Java applications coming out of the speaker.

• Data — sets the volume of sounds that notify you that you are receiving a circuit data call.

Security Features

The Security menu lets you turn security features on and off and change passwords:

• Phone Lock — turns on a feature that locks your phone: Lock Now takes effect immediately;

Auto Lock takes effect when your phone is powered off and then on. An unlock code is required to enable this feature, to unlock the phone, and to set a new unlock code. Contact

SouthernLINC Wireless for your default unlock code.

• Keypad Lock — locks the phone’s keypad, either immediately or automatically after a set period of inactivity.

• SIM PIN — enables and disables your phone’s

SIM PIN security feature. See “Turning the PIN

Requirement On and Off” on page 13.

Using Settings

• GPS PIN — enables and disables your phone’s

GPS PIN security feature. See “Setting the GPS

PIN Security Feature” on page 114.

• Change Passwords — changes your phone unlock code, security code, SIM PIN, and GPS

PIN.

Advanced Features

The Advanced menu contains advanced and rarely used Settings features.

• Alert Timeout — sets the amount of time a tone continues to sound when you receive a message notification, call alert, or Datebook reminder.

• Headset/Spkr — sets headset option. See

“Using a Headset” on page 134.

• Disco Lights — sets the lights in the external display to light up when a musical ring tone sounds.

Note: Some musical ring tones you download to your phone may not activate disco lights.

• Connectivity — Network ID sets the phone’s network IDs and their roaming options under the direction of SouthernLINC Wireless; Master

Reset lets SouthernLINC Wireless reset your service in the event of a security or provisioning problem.

125


• Reset Defaults — Reset Settings returns all settings to their original defaults; Reset All returns all settings to their original defaults and erases all stored lists. Use only under the direction of SouthernLINC Wireless.

• Return to Home — After Phone controls how long the recent calls list displays after phone calls; After Prvt controls how long the recent calls list displays after InstantLINC Mobile to

Mobile calls.

• Airplane Mode — prevents your phone from making or receiving phone calls, InstantLINC

Mobile to Mobile calls, or group calls; or transferring data.

• Phone Only — prevents your phone from making or receiving InstantLINC Mobile to

Mobile calls or group calls; or transferring data.

Note: This feature may not be offered by


• Baud Rate — sets the baud rate at which your phone communicates with a laptop computer,

PC, or similar device.

126

Profiles

A profile is a group of settings saved together so that you can apply them to your phone easily.

A profile contains these settings:

• Ring Tones — sets all options described in

“Ring Tones” on page 58, except assigning ring

tones to Contacts.

• Display/Info — sets Wallpaper, Theme, Text

Size, and Backlight options. See “Display/Info


• Phone Calls — sets Set Line and Auto

Answer options. See “Phone Calls Features” on page 123.

• Volume — sets all options described in “Volume


• Call Filter — controls which calls, call alerts, and message notifications your phone responds

to. See “Setting Call Filtering” on page 130.

• Advanced — sets headset option. See “Using a

Headset” on page 134.

Your phone arrives with preset profiles. You can also create your own profiles.

Viewing Profiles

To view the profiles stored in your phone:

1 From the main menu, select Profiles.

2 Scroll to the profile you want to view.

Tip: The profile that is currently in effect on your phone has a checkmark next to it.

3 Press A under View.

4 Scroll to view settings.

Switching Profiles

To apply a profile to your phone:


2 Scroll to the profile you want to apply.

3 Press

O

.

The profile you selected is now in effect.

How Changing Settings

Affects Profiles

Many of the settings contained in profiles can be set without switching or editing profiles — for example, by selecting Settings or Ring Tones to set options, or by setting the volume of the phone’s ring using the volume controls.

127

Profiles

When you do this, your phone either:

• Updates the profile in effect to reflect these changes, without notifying you -or-

• Creates a temporary profile that contains these changes

Note: This feature may not be offered by


To set your phone to create a temporary profile that contains changes you make to settings:


2 Press m

.

3 Select Setup > Temp Profile.


To set your phone to update the profile in effect to reflect any changes you make to settings:

Set Temp Profile to Off in step 4.

Temporary Profiles

If your phone is set to create temporary profiles, a temporary profile is created when you make changes to settings without switching or editing profiles.

A temporary profile is based on the profile in effect when you made the changes, but reflects the changed settings. Making more changes further updates the temporary profile, for as long as it is in effect.

A temporary profile stays in effect until you switch profiles, power off your phone, or delete it (or the profile it is based on) from the list of profiles.

If you do not store a temporary profile, it is deleted when you switch profiles, switch between

LINCaround and network mode, or power off your phone.

A temporary profile is automatically given the same name as the profile it is based on, but with an asterisk (*) in front of it.

When you view a temporary profile’s settings, the options that differ from the profile it is based on have an asterisk in front of them.

Storing a Temporary Profile

To store a temporary profile as a new profile:


2 Scroll to the temporary profile.

3 Press m

.

4 Select Store As New.

5 Enter the name you want to give the profile.

128


O

.

To overwrite the profile the temporary profile is based on:


2 Scroll to the temporary profile.

3 Press m

.

4 Select Store Changes.

The temporary profile is stored with the name of the profile it is based on. The profile it is based on, as it existed before you made changes to settings, is gone.

Creating Profiles


2 Select [New Profile]. -or-

Scroll to any profile. Press m

. Select New.

3 Enter the name you want to give the profile.


O

.

4 If you want to base this profile on an existing profile: Select Copy from. Select the profile you want to base this profile on. If you do not choose a profile to copy from, the new profile is based on a default profile.

5 Press

A

under Create.

Creating Profiles

6 Scroll through the list of options and set their values.

7 Press

A

under Done.

Editing Profiles


2 Scroll to the profile you want to edit.

3 Press m .

4 Select Edit.

5 Scroll through the list of options and set their values.

Deleting Profiles

To delete a profile:


2 Select the profile you want to delete.

Note: A temporary profile is automatically deleted when the profile it is based on is deleted.

3 Press m .


5 Press

O

or press

A


To delete all profiles:


129

Profiles

2 Press m

.


4 Press

O

or press

A


Setting Call Filtering

The call filtering setting in each profile lets you control which calls, call alerts, and message notifications your phone notifies you of, and which it ignores.

To set call filtering:

1 While setting options for a profile, select Call

Filter.

2 To set filtering options for phone calls, select

Phone.

• Off sets your phone to notify you of all phone calls.

• All sets your phone to ignore all phone calls.

• All Contacts sets your phone to notify you only of phone calls from numbers stored in

Contacts.

• Some Contacts sets your phone to notify you only of phone calls from numbers you select from Contacts.

3 If you set the Phone option to Some Contacts, select up to 5 Contacts entries that contain phone numbers you want to be notified of calls from.


A

under Done.

4 To set filtering options for InstantLINC Mobile to

Mobile calls and group calls, select Prvt/Grp.

• Off sets your phone to notify you of all

InstantLINC Mobile to Mobile calls and group calls.

• On sets your phone to ignore all InstantLINC

Mobile to Mobile calls and group calls.

5 To set filtering options for call alerts, select

Alerts.

• Off sets your phone to notify you of all call alerts.

• On sets your phone to ignore all call alerts.

6 To set filtering options for message notifications, select Notifications.

• Off sets your phone to notify you of all messages.

• Voice Messages sets your phone not to sound a tone or vibrate when you receive voice messages.

• Text Messages sets your phone not to sound a tone or vibrate when you receive text messages.

• All sets your phone not to sound a tone or vibrate when you receive any message.

130

Note: When you receive a type of message you have set not to sound a tone or vibrate, the message notification screen appears as usual.

7 Press

A

under Done.

Setting Call Filtering

131

Shortcuts

Shortcuts lets you access most menu options by pressing a number on your keypad (1 through 9) or saying the voice name of the shortcut. You create the shortcut and then use it to take you to that screen any time.

Creating a Shortcut

Note: When you receive your phone, all number keys may already be assigned to shortcuts. If this is the case, you can create new shortcuts by deleting or replacing existing shortcuts.

1 Go to the menu item you want to create a shortcut for.

For example, if you want to create a shortcut to the screen for creating a new Contacts entry:

From the main menu, select Contacts, then highlight [New Contact].

2 Press and hold m

until a confirmation screen appears.

3 Press

O

or press

A

under Yes.

4 Select Key.

5 Press the number key you want to assign to the shortcut.

132

6 Press

O

.

7 If you want to record a voice name for the shortcut: Select Voice. As directed by the screen prompts, say and repeat the name you want to assign to the number. Speak clearly into the microphone.

8 Press

A

under Done.

9 If the number key you chose is already assigned to a shortcut, a prompt appears asking if you want to replace the existing shortcut.

Press

A

under Yes to replace the existing shortcut. -or-

Press

A

under No if you want to keep the existing shortcut and assign another number key to the shortcut.

Using a Shortcut

If you know the shortcut number:

1 From the idle screen, press m

.

2 On your keypad, press the number assigned to the shortcut.

If you do not know the shortcut number:

1 From the main menu, select Shortcuts.

2 Scroll to the shortcut you want to use. -or-

If you assigned a voice name to the shortcut:

Press and hold t

. Say the voice name into your phone. The shortcut with that voice name is then highlighted.

3 Press

O

.

Editing a Shortcut

To change the number assigned to a shortcut:


2 With any shortcut highlighted, press m

.

3 Select Reorder.

4 Scroll to the shortcut you want to move.

5 Press

A

under Grab.

6 Scroll to the place where you want the shortcut to appear.

7 Press A under Insert.

8 Repeat step 4 through step 7 for all the items you want to move.

9 Press

A

under Done.

To change the number or voice name assigned to a shortcut:


2 Highlight any shortcut.

3 Press

A

under Edit.

Editing a Shortcut

4 With Key or Voice highlighted, press

O

to change assignments.

Deleting Shortcuts

To delete a shortcut:


2 Scroll to the shortcut you want to delete.

3 Press m

.


5 Press

O

or press

A


To delete all shortcuts:


2 With any shortcut highlighted, press m

.


4 Press

O

or press

A


133

Using a Headset

If you use a headset or similar device with your phone, you can set your phone to send incoming sound to the headset only, or to the headset and the speaker at the same time:


Advanced > Headset/Spkr.

2 Select HdsetOnly to send incoming sound to the headset only. -or-

Select Hdset&Spkr to send incoming sound to the headset and ring tones to the speaker.

Note: If you are using your phone with a headset, and you have the Flip to End option set to On, closing your flip sends incoming sound to the headset and does

not end the call. See “Setting Flip Actions” on page 51.

Attaching a Headset

1 Lift the audio jack cover.

2 Insert the headset connector firmly into the audio jack. You may have to rotate the headset connector until it fits securely into the audio jack.

Using a Remote PTT Button

If you are using a headset or other accessory with a remote PTT button, you can use the remote PTT button for phone calls, InstantLINC Mobile to

Mobile calls, and group calls.

For phone calls, use the remote PTT button to answer calls, switch between calls, and end calls.

Hold the remote PTT button for less than 2 seconds to answer calls and switch between calls.

Hold the remote PTT button for more than 2 seconds to end calls.

For InstantLINC Mobile to Mobile calls and group calls, use the remote PTT button as you would the

PTT button on your phone.

Note: When using a headset, the PTT button on your phone works the same way as when you are not using a headset. Sounds associated with InstantLINC Mobile to

Mobile calls and group calls are heard through the headset.

134

Understanding Status

Messages

You may receive status messages under certain conditions. Before contacting SouthernLINC

Wireless Customer Care, note the message, numeric code, and the conditions under which it appeared. The following table lists and describes the status messages.

Status

Messages

Message Description

Number Not in

Service

The number that you entered is not valid.

User Not

Available

User Not

Authorized

The phone that you called is either busy, out of coverage, or turned off.

Please try again later.

The person that you called has not purchased this service.

Please Try Later This service is temporarily not available. Please try again later.

Service

Restricted

This service was restricted by

SouthernLINC Wireless, or this service was not purchased.

Status

Messages


Service Not

Available

You are either out of coverage or having problems with provisioning.

System Busy

The system is experiencing heavy traffic. Please try again later.

Service Conflict This service cannot be enabled because an incompatible service has already been turned on.

Please Try

Again

An error occurred. Please try again.

SIM PIN incorrect. Try again.

You have entered an incorrect PIN number.

Please Enter

Special Code

You have inserted a SIM card that will not work with your SouthernLINC

Wireless phone. Contact

SouthernLINC Wireless Customer

Care if you believe this is a valid SIM card.

Self Check Error

+ Number Code

A fault was detected with your phone.

If this error recurs, note the error code and contact SouthernLINC Wireless

Customer Care.

135

Understanding Status Messages

Status

Messages


Self Check Fail

+ Number Code

PIN Blocked

Call Your

Provider

Insert SIM

Enter SIM PIN

Enter Unlock

Code

An operational fault was detected with your phone. Note the numeric code, turn your phone off, and contact

SouthernLINC Wireless Customer

Care.

The incorrect PIN was entered 3 consecutive times. You will be unable to place or receive calls on your phone. Contact SouthernLINC

Wireless Customer Care to have them obtain the PIN Unblocking Key (PUK) code.

Your SIM card is not being detected.

Please check to ensure that you have inserted the SIM card correctly into your phone.

Please enter your 4- to 8- digit SIM

PIN code.

Auto Phone Lock is activated. Enter your unlock code.

Warns of low memory for Net Alerts.

New Browser

Message

Memory Full!

Hardware

Failure

A problem occurred in your phone’s camera. If this error occurs, contact


136

Status

Messages

Resource Not

Available


Your phone’s camera is temporarily unavailable for use. Please try again later.

Searching for GPS satellites.

Scanning for

Satellites

Unable to

Locate Sats

Could not find GPS satellites.

Technical Error

A problem occurred in your phone’s

GPS circuitry. If this error occurs, contact SouthernLINC Wireless

Customer Care.

Safety and General

Information

IMPORTANT INFORMATION ON SAFE AND

EFFICIENT OPERATION.

READ THIS INFORMATION BEFORE USING

YOUR INTEGRATED MULTI-SERVICE

PORTABLE RADIO.

RF Operational

Characteristics

Your radio product contains a radio frequency transmitter to convey the information you wish to send as well as occasional automatic signals used to sustain connection to the wireless network, and a receiver which enables you to receive communication and connection information from the network.

Portable Radio Product

Operation and EME Exposure

Your Motorola radio product is designed to comply with the following national and international standards and guidelines regarding exposure of human beings to radio frequency electromagnetic energy (EME):

• United States Federal Communications

Commission, Code of Federal Regulations; 47

CFR part 2 sub-part J.

• American National Standards Institute (ANSI) /

Institute of Electrical and Electronics Engineers

(IEEE). C95. 1-1992.

• Institute of Electrical and Electronics Engineers

(IEEE). C95. 1-1999 Edition.

• International Commission on Non-Ionizing

Radiation Protection (ICNIRP) 1998.

• Ministry of Health (Canada). Safety Code 6.

Limits of Human Exposure to Radiofrequency

Electromagnetic Fields in the Frequency Range from 3 kHz to 300 GHz, 1999.

• Australian Communications Authority

Radiocommunications (Electromagnetic

Radiation - Human Exposure) Standard 2003.

• ANATEL, Brasil Regulatory Authority, Resolution

303 (July 2, 2002) "Regulation of the limitation of exposure to electrical, magnetic, and electromagnetic fields in the radio frequency range between 9 kHz and 300 GHz."

"Attachment to Resolution 303 from July 2,

2002."

137

Safety and General Information

To assure optimal radio product performance and make sure human exposure to radio frequency electromagnetic energy is within the guidelines set forth in the above standards, always adhere to the following procedures:

Phone Operation

When placing or receiving a phone call, hold your radio product as you would a wireline telephone.

Speak directly into the microphone.

Two-way radio operation

Your radio product has been designed and tested to comply with national and international standards and guidelines regarding human exposure to RF electromagnetic energy, when operated in the two-way mode (at the face, or at the abdomen when using an audio accessory) at usage factors of up to 50% talk/50% listen.

Transmit no more than the rated duty factor of 50% of the time. To transmit (talk), push the

Push-To-Talk (PTT) button. To receive calls, release the PTT button. Transmitting 50% of the time or less, is important because this radio generates measurable RF energy only when transmitting (in terms of measuring for standards compliance).

When using your radio product as a traditional two-way radio, hold the radio product in a vertical position with the microphone one to two inches (2.5 to 5 cm) away from the

lips.

Body-worn operation

To maintain compliance with FCC RF exposure guidelines, if you wear a radio product on your body when transmitting, always place the radio product in a Motorola approved clip, holder,

holster, case or body harness for this product.

Use of non-Motorola-approved accessories may exceed FCC RF exposure guidelines. If you do not use a Motorola approved body-worn accessory and are not using the radio product in the intended use positions along side the head in the phone mode or in front of the face in the two-way radio mode, then ensure the antenna and the radio product are kept the following minimum distances from the body when transmitting

• Phone or Two-way radio mode: one inch (2.5 cm)

• Data operation using any data feature with or without an accessory cable: one inch (2.5 cm)

138

Portable Radio Product Operation and EME Exposure

ALL MODELS WITH FCC ID AZ489FT5844 MEET THE

GOVERNMENT’S REQUIREMENTS FOR EXPOSURE

TO RADIO WAVES.

Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S.

Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health.

The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific

Absorption Rate, or SAR. The SAR limit set by the FCC is

1.6W/kg.

1 Tests for SAR are conducted using standard operating positions reviewed by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output.

Before a phone model is available for sale to the public, it must be tested and certified to the FCC that is does not exceed the limit established by the government-adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. The highest

SAR value for this model phone when tested for use at the ear is 1.05 W/kg and when tested on the body, as described in this user guide, is 1.15 W/kg during packet data transmission. (Body-worn measurements differ among phone models, depending upon available accessories and FCC requirements.) 2

While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement for safe exposure.

The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID

AZ489FT5844.

Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications Industry

Association (CTIA) web-site at http://www.wow-com.com.

1 In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements.

2 The SAR information reported to the FCC includes the

FCC-accepted Motorola testing protocol, assessment procedure, and measurement uncertainty range for this product.

139


Antenna Care

Use only the supplied or an approved

replacement antenna. Unauthorized antennas, modifications, or attachments could damage the radio product and may violate FCC regulations.

DO NOT hold the antenna when the radio

product is “IN USE”. Holding the antenna affects call quality and may cause the radio product to operate at a higher power level than needed.

Approved Accessories

For a list of approved Motorola accessories call

1-800-453-0920, or visit our website at www.motorola.com/iden.

Electromagnetic

Interference/Compatibility

Note: Nearly every electronic device is susceptible to electromagnetic interference (EMI) if inadequately shielded, designed or otherwise configured for electromagnetic compatibility.

Facilities

To avoid electromagnetic interference and/or compatibility conflicts, turn off your radio product in any facility where posted notices instruct you to do so. Hospitals or health care facilities may be using equipment that is sensitive to external RF energy.

Aircraft

When instructed to do so, turn off your radio product when on board an aircraft. Any use of a radio product must be in accordance with applicable regulations per airline crew instructions.

Medical Devices

Pacemakers

The Advanced Medical Technology Association

(AdvaMed) recommends that a minimum separation of 6 inches (15 cm) be maintained between a handheld wireless radio product and a pacemaker. These recommendations are consistent with those of the U.S. Food and Drug

Administration.

Persons with pacemakers should:

• ALWAYS keep the radio product more than 6 inches (15 cm) from their pacemaker when the radio product is turned ON.

140

• Not carry the radio product in a breast pocket.

• Use the ear opposite the pacemaker to minimize the potential for interference.

• Turn the radio product OFF immediately if you have any reason to suspect that interference is taking place.

Hearing Aids

Some digital wireless radio products may interfere with some hearing aids. In the event of such interference, you may want to consult your hearing aid manufacturer to discuss alternatives. For more information about hearing aid compatibility, see

“Hearing Aid Compatibility” on page 145.

Other Medical Devices

If you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from RF energy. Your physician may be able to assist you in obtaining this information.

Use While Driving

Check the laws and regulations on the use of radio products in the area where you drive. Always obey them.

When using the radio product while driving, please:

Operational Warnings

• Give full attention to driving and to the road

.

• Use hands-free operation, if available.

• Pull off the road and park before making or answering a call if driving conditions so require.

Operational Warnings

For Vehicles with an Air

Bag

!

!

Do not place a portable radio product in the area over the air bag or in the air bag deployment area.

Air bags inflate with great force. If a portable radio is placed in the air bag deployment area and the air bag inflates, the radio product may be propelled with great force and cause serious injury to occupants of the vehicle.

Potentially Explosive Atmospheres

Turn off your radio product prior to entering any area with a potentially explosive atmosphere, unless it is a radio product type especially qualified for use in such areas as “Intrinsically Safe” (for example, Factory Mutual, CSA, or UL approved).

Do not remove, install, or charge batteries in such areas. Sparks in a potentially explosive atmosphere can cause an explosion or fire resulting in bodily injury or even death.

141


Note: The areas with potentially explosive atmospheres referred to above include fueling areas such as below decks on boats, fuel or chemical transfer or storage facilities, areas where the air contains chemicals or particles, such as grain, dust or metal powders, and any other area where you would normally be advised to turn off your vehicle engine. Areas with potentially explosive atmospheres are often but not always posted.

Blasting Caps and Areas

To avoid possible interference with blasting operations, turn off your radio product when you are near electrical blasting caps, in a blasting area, or in areas posted: “Turn off two-way radio”. Obey all signs and instructions.

Operational Cautions

Batteries

!

All batteries can cause property damage and/or bodily injury, such as burns if a conductive material such as jewelry, keys, or beaded chains touches exposed terminals. The conductive material may complete an electrical circuit (short circuit) and become quite hot. Exercise care in handling any

142 charged battery, particularly when placing it inside a pocket, purse, or other container with metal objects. To reduce the risk of injury, batteries should not be exposed to fire, disassembled, or crushed.

Cleaning and Drying Considerations

Using a leather carry case may help protect the surfaces and help prevent liquids (e.g., rain) from entering into the interior of the radio product. This product is not water proof, and exposing the unit to liquids may result in permanent damage to the unit.

If your radio product interior gets wet, then do not try to accelerate drying with the use of an oven or a dryer as this will damage the radio product and void the warranty. Instead, do the following:

1 Immediately power off the radio product.

2 Remove Battery and SIM card (if so equipped) from radio product.

3 Shake excess liquid from radio product.

4 Place the radio product and battery in an area that is at room temperature and has good air flow.

5 Let the radio product, battery, and SIM card dry for 72 hours before reconnecting the battery and/or powering on the radio product.

If the radio product does not work after following the steps listed above, contact your dealer for servicing information.

Clean the external surfaces of the radio product with a damp cloth, using a mild solution of dishwashing detergent and water. Some household cleaners may contain chemicals that could seriously damage the radio product. Avoid the use of any petroleum-based solvent cleaners.

Also, avoid applying liquids directly on the radio product.

Accessory Safety Information

Important: Save these accessory safety instructions.

• Before using any battery or battery charger, read all the instructions for and cautionary markings on (1) the battery, (2) the battery charger, which may include a separate wall-mounted power supply or transformer, and (3) the radio product using the battery.

Accessory Safety Information

• Do not expose any battery charger to water, rain, or snow as they are designed for indoor or in-vehicle use only.

!

!

Warning: To reduce the risk of injury, charge only the rechargeable

batteries described in “Battery” on page 3. Other types of batteries may

burst, causing personal injury and damage.

• To reduce the risk of damage to the cord or plug, pull by the plug rather than the cord when you disconnect the battery charger from the power source outlet.

• Do not operate any battery charger with a damaged cord or plug — replace them immediately.

• Battery chargers may become warm during operation, but not hot. If it becomes hot to the touch, unplug it from the power outlet immediately and discontinue its use.

• Use of a non-recommended attachment to a battery charger may result in a risk of fire, electric shock, or injury to persons.

• Make sure the battery charger power cord is located so that it will not be stepped on, tripped over, or subjected to damage or stress.

143


• An extension cord should not be used with any battery charger unless absolutely necessary.

Use of an improper extension cord could result in a risk of fire and electric shock. If an extension cord must be used, make sure that:

• The pins on the plug of the extension cord are the same number, size, and shape as those on the plug of the charger.

• The extension cord is properly wired and in good electrical condition.

• The cord size is 18AWG for lengths up to 100 feet and 16AWG for lengths up to 150 feet.

• Do not operate any battery charger if it has received a sharp blow, has been dropped, or has been damaged in any way; take it to a qualified service technician.

• Do not disassemble a battery charger; take it to a qualified service technician when service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire.

• Maximum ambient temperature around the power supply or transformer of any battery charger should not exceed 40°C (104°F).

• The output power from the power supply or transformer must not exceed the rating given on the Desktop Dual-Pocket Charger.

• The disconnection from the line voltage is made by unplugging the power supply from the AC receptacle.

• To reduce risk of electric shock, unplug any battery charger from the outlet before attempting any maintenance or cleaning.

For optimum charging performance, turn off the radio product while charging it in any battery charger.

144

Hearing Aid

Compatibility

When some mobile phones are used with certain hearing devices (including hearing aids andcochlear implants), users may detect a noise which can interfere with the effectiveness of the hearing device.

Some hearing devices are more “immune” than others to this interference noise, and mobile phones can also vary in the amount of interference noise they may generate at any given time. ANSI standard C63.19 was developed to provide a standardized means of measuring both mobile phone and hearing devices to determine usability rating categories for both.

Ratings have been developed for mobile phones to assist hearing device users find phones that may be compatible with their particular hearing device.

Not all mobile phones are rated for compatibility with hearing devices, but mobile phones that are rated should have the rating available. This rating may depend on the position of a retractable antenna.

Results will vary depending on the user’s hearing device and individual type and degree of hearing loss. If a hearing device is particularly vulnerable to interference noise, even a mobile phone with a higher rating may still cause unacceptable noise levels in the hearing device. Evaluate your personal needs by trying out the mobile phone with your hearing device.

“M” Rating: Mobile phones rated M3 or M4 meet

FCC requirements for hearing aid compatibility and are likely to generate less interference to hearing devices than phones that are not labeled. (M4 is the “better” or higher of the two ratings.)

"T" Rating: Mobile phones rated T3 or T4 meet

FCC requirements for compatibility with telecoil-type ("T Switch" or "Telephone Switch") hearing devices and are likely to be more usable with such hearing devices than unrated phones.

(T4 is the "better" or higher of the two ratings.)

Hearing devices may also be measured for immunity to interference noise from mobile phones.

In some cases, hearing devices can be modified or

“hardened” to improve operation with a mobile phone. Your hearing device manufacturer or hearing health professional may help you improve the interaction of your mobile phone and hearing device. Not all hearing devices are rated for compatibility with mobile phones, but hearing devices that are rated should have the rating

145

Hearing Aid Compatibility available. Be sure to evaluate your personal needs by trying out this mobile phone with your specific hearing device, using both antenna positions if equipped with a retractable antenna.

More information about hearing aid compatibility may be found at: http://commerce.motorola.com/consumer/QWhtml/ accessibility/default.html, www.fcc.gov, www.fda.gov, and www.accesswireless.org.

146

MOTOROLA LIMITED

WARRANTY

Note: FOR IDEN SUBSCRIBER PRODUCTS,

ACCESSORIES AND SOFTWARE

PURCHASED IN THE UNITED STATES

OR CANADA

What Does this Warranty Cover?

Subject to the exclusions contained below,

Motorola, Inc. warrants its Motorola iDEN Digital

Mobile and Portable Handsets ("Products"),

Motorola-branded or certified accessories sold for use with these Products ("Accessories") and

Motorola software contained on CD-Roms or other tangible media and sold for use with these

Products ("Software") to be free from defects in materials and workmanship under normal consumer usage for the period(s) outlined below.

This limited warranty is a consumer's exclusive remedy, and applies as follows to new

Products, Accessories and Software purchased by consumers in the United States or Canada, which are accompanied by this written warranty:

PRODUCTS

COVERED

Products as defined above.

Accessories as defined above.

LENGTH OF

COVERAGE

One (1) year from the date of purchase by the first consumer purchaser of the product.

One (1) year from the date of purchase by the first consumer purchaser of the product.

Products or

Accessories that are

Repaired or Replaced.

The balance of the original warranty or

for ninety (90) days from the date returned to the consumer, whichever is longer.

Software as defined above. Applies only to physical defects in the media that embodies the copy of the software

(e.g. CD-ROM, or floppy disk).

Ninety (90) days from the date of purchase.

147

MOTOROLA LIMITED WARRANTY

What is not covered? (Exclusions)

Normal Wear and Tear. Periodic maintenance, repair and replacement of parts due to normal wear and tear are excluded from coverage.

Ornamental Decorations. Ornamental decorations such as emblems, graphics, rhinestones, jewels, gemstones and their settings, and other decorative elements, are excluded from coverage.

Batteries. Only batteries whose fully charged capacity falls below 80% of their rated capacity and batteries that leak are covered by this limited warranty.

Abuse & Misuse. Defects or damage that result from: (a) improper operation, storage, misuse or abuse, accident or neglect, such as physical damage (cracks, scratches, etc.) to the surface of the product resulting from misuse; (b) contact with liquid, water, rain, extreme humidity or heavy perspiration, sand, dirt or the like, extreme heat, or food; (c) use of the Products or Accessories for commercial purposes or subjecting the Product or

Accessory to abnormal usage or conditions; or (d) other acts which are not the fault of Motorola, are excluded from coverage.

Use of Non-Motorola Products and

Accessories. Defects or damage that result from the use of Non-Motorola branded or certified

Products, Accessories, Software or other peripheral equipment are excluded from coverage.

Unauthorized Service or Modification. Defects or damages resulting from service, testing, adjustment, installation, maintenance, alteration, including without limitation, software changes, or modification in any way by someone other than

Motorola, or its authorized service centers, are excluded from coverage.

Altered Products. Products or Accessories with

(a) serial numbers or date tags that have been removed, altered or obliterated; (b) broken seals or that show evidence of tampering; (c) mismatched board serial numbers; or (d) nonconforming or non-Motorola housings, antennas, or parts, are excluded from coverage.

Communication Services. Defects, damages, or the failure of Products, Accessories or Software due to any communication service or signal you may subscribe to or use with the Products,

Accessories or Software is excluded from coverage.

148

Software Embodied in Physical Media. No warranty is made that the software will meet your requirements or will work in combination with any hardware or software applications provided by third parties, that the operation of the software products will be uninterrupted or error free, or that all defects in the software products will be corrected.

Software NOT Embodied in Physical Media.

Software that is not embodied in physical media

(e.g. software that is downloaded from the internet), is provided "as is" and without warranty.

Who is covered? This warranty extends only to the first consumer purchaser, and is not transferable.

What will Motorola Do? Motorola, at its option, will at no charge repair, replace or refund the purchase price of any Products, Accessories or

Software that does not conform to this warranty.

We may use functionally equivalent reconditioned/refurbished/pre-owned or new

Products, Accessories or parts. No data, software or applications added to your Product, Accessory or Software, including but not limited to personal contacts, games and ringer tones, will be reinstalled. To avoid losing such data, software and applications please create a back up prior to requesting service.

How to Obtain Warranty Service or Other

Information? To obtain service or information, please call:

Motorola iDEN Customer Services

1-800-453-0920 or 954-723-4910

TTY-877-483-2840

Or visit us online at http://www.motorola.com/iden/support

You will receive instructions on how to ship the

Products, Accessories or Software, at your expense, to a Motorola Authorized Repair Center.

To obtain service, you must include: (a) a copy of your receipt, bill of sale or other comparable proof of purchase; (b) a written description of the problem; (c) the name of your service provider, if applicable; (d) the name and location of the installation facility (if applicable) and, most importantly; (e) your address and telephone number.

What Other Limitations Are There? ANY

IMPLIED WARRANTIES, INCLUDING WITHOUT

LIMITATION THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE, SHALL BE LIMITED

TO THE DURATION OF THIS LIMITED

WARRANTY, OTHERWISE THE REPAIR,

REPLACEMENT, OR REFUND AS PROVIDED

UNDER THIS EXPRESS LIMITED WARRANTY IS

149

MOTOROLA LIMITED WARRANTY

THE EXCLUSIVE REMEDY OF THE

CONSUMER, AND IS PROVIDED IN LIEU OF

ALL OTHER WARRANTIES, EXPRESS OF

IMPLIED. IN NO EVENT SHALL MOTOROLA BE

LIABLE, WHETHER IN CONTRACT OR TORT

(INCLUDING NEGLIGENCE) FOR DAMAGES IN

EXCESS OF THE PURCHASE PRICE OF THE

PRODUCT, ACCESSORY OR SOFTWARE, OR

FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR

CONSEQUENTIAL DAMAGES OF ANY KIND, OR

LOSS OF REVENUE OR PROFITS, LOSS OF

BUSINESS, LOSS OF INFORMATION OR DATA,

SOFTWARE OR APPLICATIONS OR OTHER

FINANCIAL LOSS ARISING OUT OF OR IN

CONNECTION WITH THE ABILITY OR INABILITY

TO USE THE PRODUCTS, ACCESSORIES OR

SOFTWARE TO THE FULL EXTENT THESE

DAMAGES MAY BE DISCLAIMED BY LAW.

Some states and jurisdictions do not allow the limitation or exclusion of incidental or consequential damages, or limitation on the length of an implied warranty, so the above limitations or exclusions may not apply to you.

This warranty gives you specific legal rights, and you may also have other rights that vary from state to state or from one jurisdiction to another.

Laws in the United States and other countries preserve for Motorola certain exclusive rights for copyrighted Motorola software such as the exclusive rights to reproduce and distribute copies of the Motorola software. Motorola software may only be copied into, used in, and redistributed with, the Products associated with such Motorola software. No other use, including without limitation disassembly of such Motorola software or exercise of the exclusive rights reserved for Motorola, is permitted.

150

Patent and Trademark

Information

MOTOROLA, the Stylized M Logo and all other trademarks indicated as such herein are trademarks of Motorola, Inc. ® Reg. U.S. Pat. &

Tm. Off. © 2005 Motorola, Inc. All rights reserved.

Microsoft and Microsoft Internet Explorer are registered trademarks of Microsoft Corporation.

T9 is a trademark owned by Tegic

Communications.

T9 ® Text Input Patent and Trademark Information

This product is covered by U.S. Pat. 5,818,437,

U.S. Pat. 5,953,541, U.S. Pat. 6,011,554 and other patents pending.

Java and all other Java-based marks are trademarks or registered trademarks of Sun

Microsystems, Inc. in the U.S. and other countries.

All other product names or services mentioned in this manual are the property of their respective trademark owners.

Software Copyright Notice

The Motorola products described in this manual may include copyrighted Motorola and third party software stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola and third party software providers certain exclusive rights for copyrighted software, such as the exclusive rights to distribute or reproduce the copyrighted software.

Accordingly, any copyrighted software contained in the Motorola products may not be modified, reverse-engineered, distributed, or reproduced in any manner to the extent allowed by law.

Furthermore, the purchase of the Motorola products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents, or patent applications of Motorola or any third party software provider, except for the normal, non-exclusive, royalty-free license to use that arises by operation of law in the sale of a product.

151

Index

Index

Numerics

3-way calling 49

A

Accessories 17

safety 143

Airplane mode 122 power button 6, 122

settings 126

status icon 11

turning on and off 122

Antenna 17

Audio recordings 81 playing 81

B

Backlight 122

Battery

care 6

charging 4, 5

door 3

inserting 4

safety 142

152

Baud rate 126

C

Call alerts 29

deleting 30

queue 29 receiving 29

responding 29, 30

sending 29

sorting 30 viewing 30

Call filtering 130

Call forwarding 45 all calls 45

missed calls 46 off 46

Call Timers 52

Call Waiting 48 off 48

Calls

3-way 49

answering automatically 123

answering with any key 19,

123

emergency 22

ending 19, 20 entering number 20

from memo 57

from recent calls 34

group, see Group calls

InstantLINC Mobile to Mobile

18, 123

international 50

making 18

on hold 49

phone calls 18

receiving 19

redialing 21, 123

remote PTT 134

settings 123

Speed Dial 21

TTY, see TTY calls

Turbo Dial 21

voice name 20

Camera 73 see also pictures accessing 73

accessing during

InstantLINC Mobile to

Mobile calls 88

accessing from media center

83

picture options 73

setting up 76

taking pictures 73

Circuit data 54

Clock 123

Contact information

LINC View 90

receiving 32, 92

sending 90

Contacts 36

accessing 37

capacity 42

creating entries 37

deleting 42

editing entries 39

icons 36

iDEN Phonebook Manager

44

international numbers 43

pictures 36, 37, 38, 41, 75, 81

ring tones 36, 37, 38

searching 41

showing all entries 42

showing only LINC IDs 41

SIM card 36

storing fast 39 storing from idle screen 39

storing from Memo 39, 57

storing from recent calls 33,

39

type 36

voice name 39

with non-i850 phones 44

D

Datebook

profiles 98

Digital rights management, see

DRM

Direct Launch 27

Display

backlight 122

options 9

screen 8

Drafts 71 see also Text messages, drafts

DRM count-based usage 84

default location 80

definition 84

deleting items 61, 83, 86, 104

expired items 86

gifting 80, 85

installing items 84

java applications 103

managing items 85

media center 80

renewing license 86

ring tones 60

sharing items 84 status icons 80, 84

Tell-A-Friend 80, 85

time-based usage 84

viewing license information

85

E

Email 36, 38, 54

Emergency calls 22

End key 2

153

Index

F

Faxes

receiving 54 sending 54

Flip action 18, 19, 51

G

GPS Enabled 108

best results 112

emergency calls 22, 110

map software 114

privacy options 113

security 114

viewing location 111

GPS PIN 125

GPS, see GPS Enabled

Group calls 51, 123

making 52 off 52 receiving 52

H

Handset, see phone

Headset 134

Hearing Aid Compatibility 145

154

I

Icons

Contacts 36

DRM 84

status 11

text entry 62

voice records 117

iDEN Phonebook Manager 44

Idle screen 8

creating Text messages 70

storing to Contacts 39

InstantLINC Mobile to Mobile calls

making 18

receiving 19

setting One Touch PTT 50

settings 123

turning off One Touch PTT 51

International numbers 50

storing 43

J

Java applications

deleting 104

DRM 103

memory 104

K

Keypad 2

locking 125

L

Language 123

LINC View 88

contact information 90

My Info 90

pictures 88

setting for pictures 90

LINCaround 23

channels 24

Codes 24

emergency calls 27

private LINCaround calls 26

setup options 27

talk range 24

Lists, see menus

M

Media center 78

audio recordings 81

deleting 83

DRM items 80

forward locked 79

locking 82

memory 83

pictures 80

renaming 82

viewing 78

Memo 57 calling from 57 creating 57 editing 57 storing to Contacts 39, 57 viewing 57

Memory

Java applications 104

media center 83

ring tones 60

text messages 72

voice records 119

Menu key 2, 9

Menus 9

context-sensitive 2, 9

main menu 9

Message center 65, 67

see also messages

text messages 69

Message notifications 65 setting options 65

Messages 65 see also voice mail, Text messages receiving 65

Mute 22

My Info 93 editing 93

LINC View 90

receiving 31, 92

sending 90, 94

viewing 93

N

Navigation key 2

O

One Touch PTT 50 setting 50

turning off 51

Over-the-air programming 7

P

Packet data 54

Passwords 125

Patent information 151

Pauses

dialing 50

storing 42

Phone 1, 8

active line 123

flip action 18, 19, 51

locking 125

modem 53

off 7

on 6

only 126

setting up 2

Pictures 80

accessing the camera 73

Contacts 36, 37, 38, 41, 75,

81 inserting in messages 75, 81

LINC View 88

receiving 89

recent calls 33

155

Index

sending 81, 88

taking 73

Profiles 127

call filtering 130

changing settings 127

creating 129

Datebook 98

deleting 129 editing 129

switching 127

temporary 128

viewing 127

Programming, over-the-air 7

PTT

One Touch 50

One Touch, setting 50

One Touch, turning off 51

PUK code 13

Q

Quick notes 70 see also Text messages, quick notes

R

Radio frequency 137

156

Recent calls 31 call alerts 31

calling from 34

contact information 32

creating text messages 70

deleting 33

display time 126

My Info 31

pictures 33

storing to Contacts 33, 39

viewing 32

Redialing 21, 123

Ring tones 58

deleting 61

downloading 60

DRM 60

in Contacts 36, 37, 38

memory 60

off 58 setting 58

setting in Contacts 59

vibrate 58

viewing assigned 59

Ringer 120 see also Ring tones off 120

S

Safety 137

accessory 143

battery 142

driving 158

electromagnetic interference

140 medical devices 140

radio frequency 137

Security 125

LINC View

see Pictures, sending

Service, activating 6

Settings 122

resetting 126

Shortcuts

creating 132

deleting 133 editing 133

using 132

SIM card 3, 12, 14

Contacts 36

inserting 14

removing 15

with non-i850 phones 44

SIM PIN 12, 125

changing 13

default 12 entering 12

requirement 13 unblocking 13

Speakerphone 21

Speed Dial 21, 37, 39

State Tone 28

Status messages 135

T

T9 Text Input, see text entry

Talkgroups 51, 123

joining 51

Text display area 8

Text entry 62

database 62, 63

icons 62 mode 62

Word mode 62

Text messages 65

creating 69

deleting 71, 72

drafts 71

memory 72

message center 69

quick notes 70

receiving 68

sending 69

sent messages 71

setting up 68

sorting 72

Text messaging, see Text messages

Trademark information 151

TTY calls 54

baud rate 55

making 54

mode 55 on 55

Turbo Dial 21

V

Voice mail 65, 67 receiving 67 sending calls to 19, 67 setting up 46, 67

Voice name 20, 37

creating 39

Voice records 117 creating 117

deleting 119

icons 117

labelling 118 locking 118

memory 119

playing 118

viewing 117

Volume, setting 120, 124

W

Waits

dialing 50

storing 42

Wallpaper 76, 81

Warranty 150

Word mode 62

157

Driving Safety Tips

“Safety is your most important call!”

Your Motorola wireless telephone gives you the powerful ability to communicate by voice — almost anywhere, anytime, wherever wireless phone service is available and safe conditions allow. But an important responsibility accompanies that benefits of wireless phones, one that every user must uphold.

When driving a car, driving is your first responsibility. If you find it necessary to use your wireless phone while behind the wheel of a car, practice good common sense and remember the following tips:

• Get to know your Motorola wireless phone and its features such as speed dial and redial. If available, these features help you to place your call without taking your attention off the road.

• When available, use a hands-free device. If possible, add an additional layer of convenience to your wireless phone with one of the many

Motorola Original hands-free accessories available today.

• Position your wireless phone within easy reach.

Be able to access your wireless phone without removing your eyes from the road. If you receive an incoming call at an inconvenient time, if possible, let your voice mail answer it for you.

• Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions.

Rain, sleet, snow, ice, and even heavy traffic can be hazardous.

• If you receive an incoming call at an inconvenient time do not take notes or look up phone numbers while driving. Jotting down a “to do” list or going through your address book takes attention away from your primary responsibility — driving safely.

• Dial sensibly and assess the traffic; if possible, place calls when you are not moving or before pulling into traffic. Try to plan calls when your car will be stationary. If you need to make a call while moving, dial only a few numbers, check the road and your mirrors, then continue.

• Do not engage in stressful or emotional conversations that may be distracting. Make people you are talking with aware you are driving and suspend conversations which have the potential to divert your attention away from the road.

158

• Your phone can perform many other functions besides allowing you to make and receive calls.

Do not let these features distract you from driving. Use them only when it is safe to do so.

• Use your wireless phone to call for help. Dial

9-1-1 or other local emergency number in the case of fire, traffic accident or medical emergencies.

• Use your wireless phone to help others in emergencies. If you see an auto accident, crime in progress or other serious emergency where lives are in danger, call 9-1-1 or other local emergency number, as you would want others to do for you.

• Call roadside assistance or a special non-emergency wireless assistance number when necessary. If you see a broken-down vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident where no one appears injured, or a vehicle you know to be stolen, call roadside assistance or other special non-emergency wireless number.

159

No results