advertisement
Installation Manual
Landscape Collection
Models:
LS44
LS64
LS64S
OSUB8
OSUB10
OSUB12
Table of Contents
Introduction 1
Installation Requirements and Recommendations 2
What’s Included
Required Tools/Items
Planning
Satellite Speaker Location
Subwoofer Location
Wiring Plan
Installation
Satellite Speakers
Subwoofer
Wiring
Troubleshooting
Technical Assistance
Specifications
Warranty
Limited Lifetime Warranty
Requirements and Warranty Coverage
Return Process
13
16
16
17
17
10
11
6
7
8
3
3
5
6
2
2
3
844·674·4461
LANDSCAPE INSTALLATION MANUAL
Introduction
Thank you for purchasing the Origin Seasons Landscape System. You are about to enjoy an incredible listening experience created specifically for outdoor environments. Origin engineers have invested countless hours creating loudspeakers that deliver amazing sonic performance from enclosures that can withstand the harshest elements.
The Landscape System can include multiple mid/high frequency satellites and dedicated subwoofers depending on the specific application and system design. Every speaker is designed to attach to either a 70v amplifier or a standard receiver depending on the models selected.
This instruction booklet covers the necessary information for the installation of your Landscape System, including: step-by-step instructions, troubleshooting tips for any errors that may occur, and all warranty information. If for any rea son you experience problems, or if you have installation questions, please call us at
(844) 674-4461. Hours of operation are 8:00am to 5:00pm (Pacific
Time), Monday through Friday.
WWW.ORIGINACOUSTICS.COM
1
Installation Requirements and Recommendations
What’s Included
• Silicone filled wire nuts (x2)
• Silicone filled wire nuts (x4)
(LS64S)
Required Tools/Items
• Direct burial wire
• Wire cutters
• Wire stripper
• Shovel
• Philip’s head and flat head screwdrivers
Speaker Wire Recommendations
For this setup, use a direct burial multi-stranded wiring designed for amplifier to speaker connections. The gauge of wire used can have an impact on the performance of your speakers and we would recommend that you choose the largest wire size that is practical for your installation.
Which gauge to select depends on the length of wire to be used on any particular speaker. In general the shorter the run the smaller the wire
Wire Length
(Feet)
0 - 150
Recommended
Gauge
14 size you can use, however you can never go wrong by using a thicker gauge.
100 + 12
2
844·674·4461
LANDSCAPE INSTALLATION MANUAL
Planning
The Landscape satellite speakers and subwoofers should be strategically placed to evenly distribute sound throughout the outdoor area. Fully plan out the locations of all satellite speakers, subwoofers, and buried wires before beginning the installation process.
Origin satellite speakers have been specially designed so that you can set them in the 70v configuration for large installs, or for small installs they can be set to 8ohm for use with a standard AV receiver. (For 8ohm configurations, the OSUB8 is the only subwoofer that should be used.)
Satellite Speaker Location
Evenly space the satellite speakers so that they’re facing the listening area. It’s acceptable to use both high and low locations for the satellite speakers. One satellite speaker will provide sound to about 250 ft
2
.
Use the appropriate mount for the satellite speakers depending on their location. Mounting options include tree mounts, spikes for locations on the ground, and surface mounts for walls or other flat surfaces.
Avoid placing them next to high-pressure sprinklers.
Subwoofer Location
Select a location for the subwoofer outside the listening area in about the middle of the satellite speaker arrangement. One subwoofer will provide bass to about 2000 ft
2
. If you’re using multiple subwoofers, space them out evenly and about equal-distance from the listening area. Try to position the subwoofer(s) away from standing water locations.
WWW.ORIGINACOUSTICS.COM
3
Patio
(Listening Area)
Layout Example
Satellite speakers
Subwoofer
4
Wiring Plan
When wiring, the satellite speakers and subwoofer(s) will be daisy-chained together (in parallel) using two channels: a left channel and a right channel. We recommend running the left and right channel wires next to each other in the same trench, and alternating which wire is connected to each satellite speaker
844·674·4461
LANDSCAPE INSTALLATION MANUAL for even sound dispersal. The subwoofer(s) can be connected to either channel anywhere in the chain. When using more than one subwoofer, evenly distribute them between the two channels.
Channel 1
Channel 2
Amplifier
Another option is to put the subwoofer(s) on one channel and the satellite speakers on another. If you’re doing this, you’ll want set the amplifier output to mono instead of stereo for your satellite speakers. Refer to the amplifier manual for these settings.
Channel 1
Channel 2
Amplifier
Small System Option:
For a smaller system, it’s possible to use an ordinary receiver. This option is only available if you’re using the OSUB8, and no more than two speakers per channel. All speakers and subwoofers must be set to 8ohm.
WWW.ORIGINACOUSTICS.COM
5
Installation
Satellite Speakers
Install the satellite speakers with their mounts. (Depending on the location and type of mount, you may want to connect the wires to the satellite speakers first.)
To aim the satellite speaker up and down, loosen the screw on the pole until the satellite speaker can be aimed, and then tighten it when it’s facing the appropriate direction. To prevent water damage, angle the satellite speaker less than 45 degrees up.
To aim the satellite speakers side to side on the tree or surface mount, the satellite speaker first should be screwed fully to the mount. Then, loosen it until it’s facing the right direction. Move the bolt just until it’s snug against the mount.
The rear cover on the satellite speaker can be removed to adjust the wattage taps when using a 70v amplifier. The wattage level is used to adjust the volume. Do not set it to 8ohm unless you’re planning on using two satellite speakers (or less) per channel.
To remove the back cover and access the wattage controls, unscrew the knob on the back. Then the back panel can be removed.
When reattaching the back panel, make sure it’s oriented properly, or it may not fit.
LANDSCAPE INSTALLATION MANUAL
Subwoofer
When you’ve decided on a subwoofer location, you’re ready to dig a hole. Refer to the following dimensions to determine the size of the hole:
OSUB8: 16” diameter, 14” deep
OSUB10: 20” diameter, 18” deep
OSUB12: 22” diameter, 18” deep
Use loose dirt to pad the area around where the subwoofer will be. The subwoofer shouldn’t be in contact with large rocks or large empty holes.
Using the pipe clamp, attach the pipe to the subwoofer.
Do not lift the subwoofer by holding the port tube as this could damage the subwoofer. We’ve provided straps on the subwoofer to help lift and lower it into hole. Arrange is so when it’s buried, the bottom of the cap is about 4” above the ground.
6
844·674·4461
WWW.ORIGINACOUSTICS.COM
7
8
Wiring
Dig a 5” trench where you plan on laying out the wire. Run the wire from the amplifier to your first satellite speaker location.
WARNING
DO NOT connect the amplifier to AC power before all the satellite speakers and subwoofer are connected. DO NOT connect the satellite speaker wire to the amplifier before all other connections have been made. Failure to do so may create a shock hazard. DO NOT let any stray (+) and (-) strands to come in contact with each other. This could damage your amplifier.
Using waterproof wire nuts (included), connect the wire to the first satellite speaker or subwoofer, using the following diagram as reference:
To Satellite
Speaker
From
Amplifier
To Remaining
Speakers
Bundle all three of the positive wires (the wire from the amplifier, the wire to the first satellite speaker, and the wire to the rest of the satellite speakers) together and connect them with the first wire nut. Then do the same for all the negative wires.
844·674·4461
LANDSCAPE INSTALLATION MANUAL
About Speaker Wire
You will need a wire that has at least two conductors; one that can be identified as the positive and the other as the negative. All two conductor wires have some means of identifying which conductor is which, but at times this identification may be subtle. It’s crucial that you keep track of which wire you use for positive (+) and negative (-). Typically if the wires are colored red and black, the red wire is used for positive and the black wire is used for negative. You can choose whichever color of wire you want to be positive and negative as long as you remain consistent throughout the install.
On both your amplifier and your satellite speaker the connectors will be identified as red for positive and black for negative. It is very important to look carefully at the speaker wires and be certain that the same wire that is attached to the positive connector in the amplifier is attached to the positive connector in the speaker.
Continue connecting the satellite speakers and subwoofer(s) together like this. The final satellite speaker or subwoofer will be at the end of the chain, so you’ll only need to bundle two wires together. Alternatively, if you want to wire satellite speakers on one channel and subwoofers on the other, you can use a Crown amplifier with Origin’s custom DSP for landscape speakers. For more information, please look at the Instructions and Datasheets section on our website.
If a satellite speaker is located far from the main wire in the trench, you may need to use an additional length of wire between the satellite speaker and trench. This situation is most likely to occur if the satellite speaker is in a tree or on a wall.
Connect the wires to the amplifier.
Connect your music playing device and test the system. If everything is working properly, fill all the holes and trenches.
WWW.ORIGINACOUSTICS.COM
9
Troubleshooting
If possible, it’s often good to try to isolate the problem first. For example, if you’re playing a DVD on a television and there’s no sound, try connecting an MP3 player to the system to see if that works. If it does work, then the problem is with the television, DVD player, or the cables connecting them. If it doesn’t work, the problem will be with the amplifier, speakers, or those cables.
Problem Possible Cause
The volume may be turned down or muted. Check the volume settings on both the amplifier and the television/computer/CD player/etc.
Make sure the proper source is selected on the amplifier or receiver.
Check the cord connecting the amplifier with the source. The cord may be damaged or plugged into the wrong input or output.
Check the wires connecting the amplifier with the satellite speakers. Make sure they’re connected properly and not damaged in any way.
Check to make sure all your satellites and amplifier are set to the appropriate setting. 70v or when using 2 satellite speakers
ONLY per channel, 8ohm
If you hear something like static, or the sound is cutting in and out, check the audio cables. If the problem increases when a cable is being moved, then the cable is most likely faulty or not connected properly.
Today’s audio systems may have several places to adjust the volume, for example your MP3 player may have a volume control, and your amplifier may also have one. Check to be certain that the volume isn’t turned up past 80% on any device.
Try changing sources to be certain that the selection you’ve chosen is a good quality recording.
10
844·674·4461
LANDSCAPE INSTALLATION MANUAL
Technical Assistance
If you have any questions or concerns about installing or using this product, you can reach us through one of the following methods:
Phone: (844) 674-4461
Hours of operation: 8:00am - 5:00pm (Pacific Time), Mon - Fri
Email: [email protected]
If you are having technical trouble, please include the model number and briefly explain what steps you took to resolve the problem in your email or be prepared to answer these questions over the phone. If you are considering returning the product, it’s required that you contact Origin Acoustics prior to any return attempts. This way we can determine if the issue can be resolved without returning the product or, if needed, we can provide instructions and support for the return process.
WWW.ORIGINACOUSTICS.COM
11
Model Number
Part Number
Transformer
Wattage Taps
Enclosure
Size (WxHxD)
LS44
OLS4400
LS64
OLS6600
LS64S
OLS6600S
OSUB8
OSUB8000
Tweeter Dome
Titanium
Tweeter Diameter
0.75” (20mm)
Woofer Cone
Injection molded polypropylene
Woofer Diameter
4.5” (114mm)
Titanium
1” (25mm)
Injection molded polypropylene
6” (152mm)
Titanium
1” (25mm)
Injection molded polypropylene
6” (152mm)
N/A
N/A
Polypropylene
8” (203mm)
Frequency Response 80Hz - 20KHz ±3dB 60Hz - 20KHz ±3dB 60Hz - 20KHz ±3dB 39Hz - 100Hz ± 3dB
70v or 8ohm
30w, 15w, 7.5w,
3.75w, 8ohm
70v or 8ohm
50w, 25w, 12.5w,
6.75w, 8ohm
70v or 8ohm
50w, 25w, 12.5w,
6.75w, 8ohm
PolyComposite, weather and UV resistant enclosure
5.25x8.75x8.25”
(134x221x210mm)
7x10x11”
(179x255x280mm)
7x10x11”
(179x255x280mm)
70v or 8ohm
N/A
12.5x21.25x12.5”
(315x538x315mm)
OSUB10
OSUB10000
N/A
N/A
Polypropylene
10” (254mm)
32Hz – 100Hz ±3dB
70v
N/A
LANDSCAPE INSTALLATION MANUAL
Specifications
OSUB12
OSUB12000
N/A
N/A
Polypropylene
12” (305mm)
23Hz – 100Hz ±3dB
70v
N/A
15.75x21.5x15.75”
(400x543x400mm)
17.75x23.5x17.75”
(450x598x450mm)
12
844·674·4461
WWW.ORIGINACOUSTICS.COM
13
8.27
210
LS44
8.71 221.2
5.29 134.4
LS64
LS64S
10.06 255.4
7.04 178.8
11.02
280
14
844·674·4461
OSUB8
OSUB10
LANDSCAPE INSTALLATION MANUAL
4.3in
110mm
8.0in
203mm
21.2in
538mm
8.9in
225mm
9.8in
250mm
12.4in
315mm
4.3in
110mm
8.0in
203mm
21.4in
543mm
9.1in
230mm
9.8in
250mm
15.7in
400mm
OSUB12
4.3in
110mm
7.4in
189mm
23.5in
598mm
11.8in
299mm
WWW.ORIGINACOUSTICS.COM
9.8in
250mm
17.7in
450mm
15
Warranty
Limited Lifetime Warranty
Origin Acoustics warrants to the original retail purchaser only that this Origin Acoustics product will be free from defects in materials and workmanship, provided the speaker was purchased from an
Origin Acoustics authorized dealer.
If the product is determined to be defective, it will be repaired or replaced at Origin Acoustics’ discretion. If the product must be replaced yet it is no longer manufactured, it will be replaced with a model of equal to or greater value that is the most similar to the original. If this is the case, installing the replacement model may require mounting modifications; Origin Acoustics will not be responsible for any such related costs.
16
844·674·4461
LANDSCAPE INSTALLATION MANUAL
Requirements and Warranty Coverage
This warranty may not be valid if the product was purchased through an unauthorized dealer. This warranty only applies to the individual that made the original purchase, and it cannot be applied to other purchases. The purchaser must be prepared to provide proof of purchase (receipt). This warranty will not be valid if the identifying number or serial number has been removed, defaced, or altered.
This warranty does not cover the following:
• Accidental damage
• Damage caused by abuse or misuse
• Damage caused by attempted repairs/modifications by anyone other than Origin Acoustics or an authorized dealer
• Damage caused by improper installation
• Normal wear, maintenance, and environmental issues
• Damage inflicted during the return shipment
Return Process
Before making any return attempts, it is required that you first contact Origin Acoustics. Return product to Origin Acoustics or your dealer, either in person or by mail. It’s preferable if the product is returned in the original packaging. If this isn’t possible, the customer is responsible for insuring the shipment for the full value of the product.
This warranty is in lieu of all other expressed or implied warranties.
Some states do not allow limitations on implied warranties, so this may not apply depending on the customer’s location. (For more information, see
Magnuson-Moss Warranty Act.)
WWW.ORIGINACOUSTICS.COM
17
©2014 Origin Acoustics. All copyrighted, trademarked and patented elements mentioned herein are the sole property of
Origin Acoustics.
advertisement