advertisement
_______________________________________
Copyright Statement: “ © 2005 UTStarcom, Inc. All rights reserved. No part of this publication may be reproduced in any form or by any means without the prior written permission of UTStarcom, Inc.”
Warranty Language: “The contents of this manual, whether in whole or in part, do not constitute any express or implied warranty with respect to any products of UTStarcom, Inc., or its affiliates.”
Doc. Code: 8810026700.051221 i
ii
Table of Contents
SAFETY PRECAUTIONS.................................................... 1
1. GETTING STARTED ....................................................... 8
1.1 P ACKAGE C ONTENTS .....................................................................8
1.2 P HONE S PECIFICATIONS ................................................................9
...............................................................10
1.4 D ISPLAY I NDICATORS ...................................................................12
1.5 C HARGE THE B ATTERY ................................................................13
1.6 R EPLACE THE B ATTERY ...............................................................14
1.7 C ONVENTIONS U SED IN THIS M ANUAL ..........................................15
1.8 A CCESS M ENU /L IST O PTIONS ......................................................16
2. BASIC OPERATIONS ................................................... 17
2.1 S WITCH THE P HONE O N /O FF .......................................................17
2.2 M AKE A C ALL ..............................................................................17
2.3 U SE S PEED D IAL .........................................................................18
2.4 A NSWER A C ALL ..........................................................................18
2.5 R EJECT A C ALL ...........................................................................19
2.6 I N C ALL O PERATIONS ..................................................................19
2.6.3 Make a New Call............................................................................20
2.6.6 Mute the Microphone Volume ........................................................22
2.6.7 Access the Phonebook ..................................................................23
2.6.8 Adjust the Listening Volume...........................................................23
2.7 S TORE A P HONE N UMBER ............................................................24
2.8 C ALL L OG S HORTCUT ..................................................................24
2.9 C USTOM F UNCTIONS S HORTCUT .................................................25
2.10 P ROFILES S HORTCUT ................................................................25
2.11 V IBRATION S HORTCUT ...............................................................25
3. PHONEBOOK (NAMES) ............................................... 26
3.1 S EARCH ......................................................................................26
3.2 A DD E NTRY .................................................................................28
3.3 D ELETE ......................................................................................30
...............................................................................31
3.5 S PEED D IAL ................................................................................32
.....................................................................................33
4. MENU ............................................................................ 34
4.1 M ESSAGES .................................................................................34
4.2 C ALL L OG ...................................................................................51
4.3 P ROFILES ...................................................................................61
4.4 S ETTINGS ...................................................................................66
iii
4.6 G AMES .......................................................................................79
4.7.3 Network Parameter........................................................................84
4.8 N ETWORK ...................................................................................92
4.8.4 Register Interval Time ....................................................................93
4.8.6 Repeat Dial on Busy ......................................................................94
4.8.7 Reject Anonymous Incoming Call ..................................................94
4.8.9 Personal Information......................................................................94
4.9.1 Vendor Information.........................................................................95
4.9.3 Remote TFTP Update....................................................................95
4.9.4 Remote TFTP Server.....................................................................96
4.9.5 Local TFTP Update........................................................................96
4.9.7 Web Authentication ........................................................................97
5. INPUT METHOD............................................................ 98
5.1 S WITCH I NPUT M ETHOD ...............................................................98
5.2 E NGLISH .....................................................................................98
5.4 P IN Y IN AND S TROKE ..................................................................100
........................................................................................100
5.6 S YMBOLS ..................................................................................101
6. TROUBLESHOOTING..................................................102
iv
Safety Precautions
SAFETY PRECAUTIONS
CE Declaration of Conformity
For the following equipment: WiFi handset F3000
Is herewith confirmed to comply with the requirements set out in the
Council Directive on the Approximation of the Laws of the Member States relating to Electromagnetic Compatibility (89/336/EEC), Low-voltage
Directive (73/23/EEC) and the Amendment Directive (93/68/EEC), the procedures given in European Council Directive 99/5/EC and
89/3360EEC.
The equipment was passed. The test was performed according to the following European standards:
EN 300 328 V.1.6.1 (2004-11)
EN 301 489-17 V.1.2.1 (2002-08)
EN 60950: 2000
1
Safety Precautions
FCC RF Exposure Compliance
This phone has been tested and complies with the Federal
Communications Commission (FCC) RF exposure limits for the General
Population/Uncontrolled exposure environment. In addition, it complies with the following Standards and Guidelines:
FCC 96-326, Guidelines for Evaluating the Environmental Effects of
Radio-Frequency Radiation
FCC OET Bulletin 65 Edition 01-01 (2001) Supplement C, Evaluating
Compliance with FCC Guidelines for Human Exposure to Radio
Frequency Electromagnetic Fields
ANSI/IEEE C95.1-1992, IEEE Standard for Safety Levels with
Respect to Human Exposure to Radio Frequency Electromagnetic
Fields, 3 kHz to 300 GHz
ANSI/IEEE C95.3-1992, IEEE Recommended Practice for the
Measurement of Potentially Hazardous Electromagnetic Fields - RF and Microwave
Note: For body-worn operation, this phone has been tested and meets FCC RF exposure guidelines when used with an accessory that contains no metal and when the back of the phone faces your body.
Use of other accessories may not ensure compliance with FCC RF exposure guidelines.
The antenna used for this transmitter must not be co-located or must not operate in conjunction with any other antenna.
2
Safety Precautions
Handling the Phone, Battery and Charger
DANGER
Only use the battery and charger specified for the phone. Failure to do so can result in damage to the phone, electric shock or fire.
CAUTION
Do not store or operate the phone or charger in hot, damp, or dusty areas, which can damage electrical and mechanical components. Avoid prolonged exposure to temperatures below 5°C or in excess of 35°C.
DANGER
Do not drop, shake or throw the phone or charger.
Rough handling can damage internal circuit boards and the battery pack.
Do not use the phone in the vicinity of volatile gases.
Leave the area before using the phone. Failure to leave the area can result in the risk of fire or an explosion.
Do not disassemble or modify the phone, charger, or battery. Incorrect modifications, reassembly, or tampering may result in malfunction or personal injury.
3
Safety Precautions
Handling the Phone
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
This device may not cause harmful interference
This device must accept any interference received, including interference that may cause undesired operation
This device has been designed to operate with the antennas listed below, and having a maximum gain of 3.44 dB. Antennas not included in this list or having a gain greater than 3.44 dB are strictly prohibited for use with this device. The required antenna impedance is 50 ohms.
To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted for successful communication.
DANGER
This phone has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This phone generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this phone does cause harmful interference to radio or television reception, which can be determined by turning the phone off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna
4
Safety Precautions
- Increase the separation between the phone and receiver
- Connect the phone into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help
Observe local regulations for specialized areas
(hospital, aircraft, etc) when using the phone.
Do not use the phone while operating a vehicle.
CAUTION
Changes or modifications not expressly approved by
UTStarcom, Inc. could void the user’s authority to operate the phone.
Keep all storage media (magnetic cards, floppy disks, credit cards, etc.) away from the phone. Close encounters or contact can erase or damage the storage media.
Keep all sharp metal objects (pins, nails, hairpins etc.) away from the phone handset. The handset earpiece contains a strong magnet that can attract and hold metal objects. Remove any objects from the handset earpiece before using, to avoid personal injury.
In case of emergency, key in the emergency number
(911 for example in US), then press the Talk key and let the operator know your specific location. Don’t hang up until you are told to do so.
5
Safety Precautions
Handling the Battery
DANGER
Do not dispose of the battery pack in a fire. It may explode. Check with local waste management codes for disposal instructions.
Do not force the battery pack into the phone. Improper installation can cause malfunctions or damage the battery pack. This may result in fire or personal injury.
Use caution in handling batteries in order not to short the battery on conductive materials such as rings, bracelets, and keys. The battery and/or conductor may overheat and cause burns.
If the battery becomes too hot while recharging, it should be removed immediately from the charger.
When clothes or skin are exposed to battery leakage, rinse with clean water at once to prevent skin irritation.
Do not use a cracked, leaking or odor-emitting battery pack near an open flame or high temperatures.
CAUTION
If a fully discharged battery is stored for a long period of time, it may not be possible to recharge the battery.
Observe local waste management codes for proper battery disposal instructions.
6
Safety Precautions
Handling the Charger
DANGER
Only use a power source that provides the appropriate voltage (AC100~240 V) for the charger. An unsuitable power source can result in damage to the charger, fire or electric shock.
Do not use the charger if the power supply cord or plug is damaged or frayed (exposed or broken wires, etc).
This can result in the risk of fire or electric shock.
Do not short circuit the charger connector jack. This may result in fire or electric shock.
Immediately unplug the charger from the wall outlet in the event that liquid is spilled into the unit to prevent fire or electric shock.
CAUTION
Always unplug the charger from the wall outlet before cleaning to avoid the risk of electric shock.
Do not place heavy objects on the cord to avoid damage.
Always grip the power plug when removing the charger from the wall outlet. Do not pull on the power supply cord to avoid damage and the risk of electric shock.
7
Getting Started
1. GETTING STARTED
1.1 Package Contents
Please check the package contents by comparing them with the following list. If you find anything missing or if the documentation set is incomplete, contact your local phone dealer immediately.
8
Model F3000 (with one battery)
Charger (one)
User Manual (one)
Quick Start Guide (one)
Certificate of quality
Getting Started
1.2 Phone Specifications
Dimensions About 85 x 43 x 22 (L×W×H) mm
Battery
Charger
Charger Weight
Charging Time
Standby Time
Talking Time
DC 3.7V 1100mAh Li-ion battery
Input: 100~240V AC, 50~60Hz
Output: 5.2V DC, 600mA
Approximately 80g
Approximately 3-4 hours
Approximately 75 hours
Approximately 3 hours
Standby time refers to the state in which the phone is on continuously without being used for calls, or moved to different service areas
The standby time depends on the network conditions, phone usage and surrounding area. The phone consumes more battery power under the following conditions:
- In areas with weak signals, with high or low temperatures, or when used outside the service coverage area
- When the phone frequently searches for network signal due to location changes
- When you talk on the phone for long periods of time
- The Alarm, Backlight or Vibration function is active
- Ring or listening volume is set to maximum
9
Getting Started
1.3 Handset Description
1. Earpiece
2. LCD Screen
3. Left Soft Key:
This key is used to perform the function indicated on the screen above it.
10
Getting Started
4. Right Soft Key:
This key is used to perform the function indicated on the screen above it.
5. Navigation Key:
This key is used to scroll up and down through menu lists.
6. Talk Key:
This key is used to make or receive a call. It can also be used to access outgoing call logs in standby mode.
7. Power Key:
This key is used to switch the phone on and off, to end a call, or to return to standby mode.
8. ~ Number Keypad:
These keys are used to enter numbers and characters.
9. * Key/Switch Key:
This key is used to key in “*” or “+” (by pressing and holding the key), or to change the text input method.
10. # Key:
This key is used to key in “#” or pause symbol “P” (by pressing and holding the key).
11. Microphone
12. Fixed Antenna
13. Battery
14. Slot for Hand Strap
15. Battery Release Button
16. Charging Socket
11
Getting Started
17. Earphone Socket
18. Speaker
Note: This is only a brief introduction to the keypad functions.
Please refer to the contents of this user manual for detailed descriptions and operations.
1.4 Display Indicators
1. Shows the current signal strength. The higher the bar, the stronger the signal.
Strong Weak
2. Refers to the calling or connecting mode.
3. Indicates there are unread text messages.
4. Indicates the Alarm function is active.
12
Getting Started
5. (blue) Means the Ring Mode is set to Vibration; if the Ring Mode is set to Vibration And Ring or Ring After Vibration, will be displayed; if the Ring Mode is set to Mute, will be displayed. If the
No Disturb function is active, will be displayed.
If you press and hold the vibration shortcut key
(green) will be displayed
in standby mode,
6. Indicates there are unread voice mails.
7. Indicates there are unread new emails.
8. Indicates the battery charge level. The higher the bar, the greater the battery power.
High Low
9. Content Display Area: Shows phone numbers, characters, etc.
10. Soft key function display area: Shows the functions of the left soft key
and the right soft key .
1.5 Charge the Battery
When the battery power is low and needs recharging, the battery indicator
will flash continuously, and the phone will sound a low battery alarm
(if the Alert Tone is set to On and the Ring Mode is set to neither
Vibration nor Mute), reminding you that the battery is running low and the phone will be switched off automatically. To charge the battery, follow the steps below:
1. Connect the charger to an AC wall outlet (100~240V).
2. Connect the lead from the charger to the charging socket of the phone.
The battery indicator bar starts to scroll ( ).
13
Getting Started
If the phone is off, when you open the flip cover, the text “Charging…” is also displayed on the LCD screen.
3. When the battery indicator bar stops scrolling, charging is complete.
The text “Fully Charged!” is also displayed on the LCD screen, if the phone is off.
With your phone turned off, charge your new battery for 4 hours before its first use
When the battery is being charged, it is normal that your charger and phone become warm to the touch
If the phone is turned on while charging, you can still make and receive calls as usual, but this will consume battery power, thus extending the charging time
1.6 Replace the Battery
Since battery power is easily consumed, if you find the battery power diminishes quickly after full charging, please replace your battery. After replacing the battery, you will need to reset the date and time.
1. In standby mode, switch the phone off by pressing and holding
(Otherwise, some user settings will be lost.)
.
14
Getting Started
2. Remove the battery.
With the back of the phone facing you, press the release button and lift the battery off.
3. Install the new battery.
Slide the new battery as illustrated until it locks into place.
1.7 Conventions Used in this Manual
In this manual, “press the key” means to release the key after you press it; “press a nd hold the key” means to press the key for over 2 seconds before releasing it
The text displayed on the screen is indicated in bold in this example Menu
manual, for
Most operations ne ed to be performed in standby mode. When the left soft key function is Menu, the phone is in standby mode
15
Getting Started
Navigation key operations follow:
Press the “Up”, “Down”, “Left”, and “Right” directions on the
Navigation key to execute operations such as browsing, selecting,
1.8 Access Menu/List Options
A variety of options are available for the menus and lists, such as: Men and Names.
u
For example, to access Menu Tools Alar m, follow the s teps below:
(Menu).
2. Press to reach Tools, and then press the left soft key ( Ok) .
3. Press to highlight Alarm, and then press the left soft key
(Ok).
If there is a number in front of the intended option, you can access the option by directly pressing the corresponding number key.
Note: To return to the previous menu level, press the right soft key
(Back). To return to standby mode without changing the menu settings, press .
16
Basic Operations
2. BASIC OPERATIONS
2.1 Switch the Phone On/Off
Press and hold the power key power-on/off animation.
. The phone will display the
If the PowerOn Code function is active, after switching on the phone, enter the security code (with each input displayed as *) and press the left soft key (Ok). If correct, the power-on animation will be displayed; otherwise Code Error will be displayed.
2.2 Make a Call
Note: Prior to making or receiving calls, the phone must be connected to a wireless Access Point (AP) and registered with the network. See “WiFi” on page 81 for detailed instructions.
1. Key in the phone number.
Press to move the cursor. Press the right soft key (Clear) to delete the character or digit to the left of the cursor. To delete all the numbers or characters, press and hold the right soft key
(Clear).
2. Press to call the number. “Connect...” will be displayed.
To cancel the call attempt, press the right soft key time display of 00:00:00 will appear. You can also press the to cancel the call; the phone will return to standby mode.
(Cancel); a
key
3. When the call is connected, the call timer is displayed.
4. To end the call, press the right soft key key, or close the flip cover.
(Hangup) or the
17
Basic Operations
Note: If the Repeat Dial on Busy function is active, the phone will enable you to automatically redial the last busy number that you tried to dial. After you dial a busy number, “Unconnected! Redial?” will be displayed. Press the left soft key (Ok); the phone will make automatic attempts to dial this number until it can be reached.
2.3 Use Speed Dial
If you have assigned a phone number to one of the speed dial keys
~ , you can quickly call that phone number:
1. In standby mode, press and hold the corresponding speed dial key to automatically display the phone number.
2. Press to call the number.
For details of speed dial settings, refer to “Speed Dial” on page 32
Note: Pressing and holding in standby mode will call the voice mail access number. (Refer to “Voice Mail” on page 91.)
2.4 Answer a Call
In the case of Answer Mode set to Flip Key, if the flip cover is closed, you may answer an incoming call by opening the flip cover; if the flip cover is opened, press the left soft key key to answer the call
(Answer) or the
If the Answer Mode is set to Talk Key, press the left soft key
(Answer) or the key to answer an incoming call
If the Answer Mode is set to Any Key, press any key to answer an incoming call except the right soft key
key
, the key or the
When there is an incoming call, you may press vibration or ring alert without picking up the call
to stop the
18
Basic Operations
To end an ongoing call, press the right soft key
key, or close the flip cover
(Hangup) or the
2.5 Reject a Call
When there is an incoming call, press the right soft key
(Hangup) or the key, or close the flip cover to reject the call
If you press the right soft key (Hangup) to reject an incoming call, the call duration 00:00:00 will be displayed
When there are missed calls (excluding rejected calls), the phone will prompt you. In this case, press the left soft key the missed call log (Missed Log)
(View) to enter
2.6 In Call Operations
While on a call, you can perform the following operations:
2.6.1 Hold a Call
You can place an ongoing call temporarily on hold.
During a call, press the left soft key left soft key (Ok) to select Hold.
(Option), and then press the
To take the call off hold, press the left soft key then press the left soft key
(Option), and
(Ok) to select Unhold
To end the held call, press the right soft key
key, or close the flip cover
(Hangup) or the
19
Basic Operations
2.6.2 Call Waiting
If the Call Waiting function is activated (refer to “Call Waiting” on page 92), when another call comes in during a call, the earpiece will sound a waiting tone.
To reject the incoming third party call and continue the current call, press the right soft key (Hangup)
To hold the current call and answer the incoming third party call, press the left soft key (Answer) or the key
After answering the third party call, you can perform the following operations:
Press the left soft key and press the left soft key call and the held call
(Option). Press to highlight Swap
(Ok) to switch between the current
Press the left soft key and press the left soft key
(Option). Press to highlight Mute
(Ok) to mute the microphone volume
Press the right soft key
Phonebook and press the left soft key phonebook entry list
(Hangup). Press to highlight
(Ok) to access the
Press key
Press the
to highlight the desired call, and then press the right soft
(Hangup) to end the selected call
key or close the flip cover to end both calls
2.6.3 Make a New Call
While on a call, if you need to connect to a third party, press the left soft key (Option). Press to highlight New Call and press the left
20
Basic Operations soft key (Ok). Key in the third party’s phone number or find the number from the phonebook, and then press the left soft key (Call) or the key. When the connection succeeds, you can start the call with the third party. The original call will be placed on hold.
The following operations are available:
Press the left soft key (Option). Press to highlight
Conference and press the left soft key (Ok) to initiate the conference call (Refer to “Conference Call” on page 21)
Press the left soft key and press the left soft key
(Option). Press to highlight Mute
(Ok) to mute the microphone volume
Press the right soft key
Phonebook and press the left soft key phonebook entry list
(Hangup). Press to highlight
(Ok) to access the
Press key
Press the
to highlight the desired call, and then press the right soft
(Hangup) to end the selected call
key or close the flip cover to end both calls
2.6.4 Conference Call
If the Three Way Call function is active, after making a new call with the original call on hold (refer to “Make a New Call” on page 20), you can make a conference call with both parties. Press the left soft key
(Option). Press to highlight Conference and press the left soft key
(Ok) to initiate the conference call.
Press key
to highlight the desired call, and then press the right soft
(Hangup) to end the selected call
21
Basic Operations
Press the key or close the flip cover to end both calls
2.6.5 Transfer a Call
If the Call Transfer function is activated (refer to “Call Transfer” on page
92), you can transfer an ongoing call to another phone number:
During a call, press the left soft key (Option). Press to highlight Call Transfer and press the left soft key (Ok). Press to highlight Blind or Consult and press the left soft key (Ok). Key in the transfer number and press the left soft key (Ok).
If Blind is selected, the call will be directly transferred to the dialed phone number after the connection succeeds
If Consult is selected, after the transferred-to party answers the call, announce the transfer. Then, press the left soft key to transfer the intended call
(Transfer)
The Blind option is selectable only when the Call Transfer function is set to Blind or Blind & Consult; the Consult option is selectable only when the Call Transfer function is set to Consult or Blind & Consult
2.6.6 Mute the Microphone Volume
During a call, press the left soft key highlight Mute and press the left soft key volume will be set to mute.
(Option). Press to
(Ok). The microphone
To resume the volume, press the left soft key
to highlight Unmute and press the left soft key
(Option). Press
(Ok)
22
Basic Operations
2.6.7 Access the Phonebook
While on a call, press the left soft key highlight Phonebook and press the left soft key phonebook entry list will be displayed.
(Option). Press to
(Ok). The
After entering the phonebook, press to scroll through the entries.
Press the left soft key (Detail) to check the details (name, phone numbers, group category and email address) for the highlighted entry
In the phonebook entry list, Press ~ to enter the first letter(s)/digit(s) of the desired entry (name). All names starting with these letter(s)/digit(s) will be displayed (refer to “Search” under the
Phonebook menu on page 26 for details)
Note: If there are no entries in the phonebook, when you press , the error tone will sound.
2.6.8 Adjust the Listening Volume
1. During a call, press screen.
to access the listening volume adjustment
2. There are five volume levels. Press decrease the volume.
to increase or to
If the volume is at the highest level, the volume level will not change when is pressed; if the volume is at the lowest level, the volume level will not change when is pressed.
3. After completing the volume selection, press the right soft key
(Back) or wait for one second to return to the call timer mode. The phone will save the adjusted volume level.
23
Basic Operations
2.7 Store a Phone Number
In standby mode, a phone number added to the phonebook.
1. Enter the desired phone number and press the left soft key
(Option).
2. Select Save.
3. Select New Contact or Update Contact.
- New Contact: Select this option to add a new entry with the entered phone number. Follow the prompts to edit phone numbers, the name, group category or email address
- Update Contact: Select this option to modify an existing entry with the entered phone number. The phonebook entry list will be displayed. Enter the first letter(s)/digit(s) of the intended entry
(name). Press soft key
to highlight the entry, and then press the left
(Ok). Follow the prompts to modify the entry
Note: For details of operations, see “Add Entry” on page 28.
2.8 Call Log Shortcut
In standby mode, you can quickly view the call logs: outgoing call log
(Dialed Log), received call log (Received Log) and missed call log (Missed
Log).
Press to display the outgoing call list. Press through other outgoing call records
to scroll
Press to display the received call list. Press through other received call records
to scroll
Press to display the missed call list. Press missed call records
For detailed operations, refer to “Call Log” on page 51.
to scroll through
24
Basic Operations
2.9 Custom Functions Shortcut
1. In standby mode, press to access the custom functions menu.
2. Press to highlight the desired option: Scheme (1), Inbox (2),
WiFi (3), Games (4), Edit Message (5), Network (6), Calculator (7),
Calendar (8) or Misc (9), and then press the left soft key access the option.
(Ok) to
You can also access an option by pressing its corresponding number key.
2.10 Profiles Shortcut
In standby mode, press highlight the desired option, and then press the left soft key access the option.
to access the Profiles menu. Press to
(Ok) to
For details of profile setup, refer to “Profiles” on page 61.
2.11 Vibration Shortcut
In standby mode, press and hold to set the ring mode for incoming calls, messages, memos and alarms to vibration, and set the keypad tone and flip tone to “Off”. (green) will be displayed.
Press and hold again to resume ring mode, keypad tone and alert tone in the current profile
For detailed operations, refer to “Ring Mode” on page 62
25
Phonebook (Names)
3. PHONEBOOK (NAMES)
You can store frequently used phone numbers and names in the phone memory (phonebook). The phonebook can store up to 200 entries. Each entry may contain a name, a group category, three phone numbers and an email address.
You can enter the phonebook in either of the following ways:
In standby mode, press the right soft key (Names)
In standby mode, press the left soft key (Menu), press scroll to Phonebook and press the left soft key (Ok)
From the phonebook menu, you can select from the following options:
to
3.1 Search
Names Search
After you access this option, the phonebook entry list will be displayed.
Key in the first letter(s) or digit(s) of the name you are searching for. A maximum of six letters/digits can be entered. All names starting with these letter(s)/digit(s) will be displayed, including Chinese names starting with corresponding PinYin letters.
Enter letters or digits as follows:
1. Press ~ to enter the corresponding letter or digit labeled on the respective key. For keys ~ , press the corresponding key repeatedly until the intended letter/digit appears. For example: if you press repeatedly, the following letters and digit appear in turn: a → b → c → 2
26
Phonebook (Names)
2. The letter/digit just entered will be underlined. After you have entered the intended letter/digit, press the appropriate number key to input the next letter/digit. If the next letter/digit and current letter/digit share the same key, wait for one second to input the letter/digit again.
To delete the last entered letter/digit, press the right soft key
(Clear); to delete all letters/digits, press and hold the right soft key
(Clear).
When a matched name (entry) is highlighted, you can press call this entry’s phone number
to
- If the entry contains only one phone number, the phone number will be dialed immediately
- If the entry contains more than one phone number, phone numbers will be listed. Press the left soft key
to highlight the desired number and press
(Call) to call the number
- If the entry contains no phone number, pressing response
will have no
When an entry is highlighted, press the left soft key (Detail) to see the detailed information: name, group category, phone number(s) and email address. Press to select the desired item
When entry details are displayed, you can press phone number and then press to call the number
to highlight a
After selecting the desired item, you can press the left soft key
(Option) to select from some of following options:
3.1.1 Edit
Change the name, group category, phone numbers and email address by following the screen prompts.
27
Phonebook (Names)
3.1.2 Del Contact
After this option is selected, “Delete?” will be displayed. Press the left soft key (Ok) to confirm the deletion.
3.1.3 Group Members
This option is available only when the selected item is the group category.
Select this option to view the list of entries in this group category.
3.1.4 Call
This option is available only when the selected item is a phone number.
Select this option to call the selected phone number.
3.1.5 Send Message
This option is available only when the selected item is a phone number.
Select this option to send a message to the selected phone number.
3.1.6 Send Email
This option is available only when the selected item is the email address.
Select this option to send an email to the selected email address.
3.2 Add Entry
Names Add Entry
Select this option to add new entries into the phonebook.
If the most recently edited record was not saved, this unsaved record will be displayed after you access this option.
1. Edit Name: With the item highlighted, press the left soft key
(Ok). Key in the name and press the left soft key (Ok).
28
Phonebook (Names)
You can enter a maximum of 20 alphanumeric characters or 10
Chinese characters (refer to “Input Method” on page 98).
2. Select group category: Press to highlight the item next to the name, and then press the left soft key (Ok). Press to highlight the desired group category: Common, Business, Family,
Friend, Others or Blacklist, and press the left soft key (Ok).
3. Edit phone number(s): Press to highlight the or or item, and then press the left soft key (Ok). Enter the phone number (40 digits maximum), and press the left soft key add more phone number(s), repeat this step.
(Ok). To
- : Indicates mobile phone number
-
-
: Indicates home phone number
: Indicates office phone number
4. Edit email address: Press press the left soft key
to highlight the letters/digits maximum) and press the left soft key
icon, and then
(Ok). Enter the email address (50
(Ok).
5. Press to highlight the Save item, and then press the left soft key
(Ok) to complete the operation.
Either one phone number or the email address needs to be filled in.
Otherwise Save Error will be displayed when you press the left soft key (Ok) in step 5
If the name is not filled in, the phone will use the first 20 digits/letters of the first phone number or the email address (when all phone numbers are left blank) as the name
29
Phonebook (Names)
Details of the newly added record cannot be identical to those of an existing record. Otherwise, the text Exists will be displayed when you press the left soft key (Ok) in step 5
The phone will automatically reject any incoming caller whose number is on the Blacklist. No response will be displayed.
No more entries can be added if the phonebook memory is full. When
Add Entry is selected, the phone will remind you that the phonebook memory is full
3.3 Delete
Names Delete
You can select from the following options to delete entries one by one or all at once.
3.3.1 One by One
Names Delete One by one
When you access this option, the phonebook entry list will be displayed.
Enter the first letter(s)/digit(s) of the intended entry (name). Press highlight the entry, and then press the left soft key
to
(Delete). When
“Delete?” is displayed, press the left soft key deletion.
(Ok) to confirm the
3.3.2 All
Names Delete All
When you access this option, “Delete?” will be displayed, press the left soft key (Ok). The prompt Enter Code will be displayed. Enter the security code, and press the left soft key (Ok). If the code is correct, all phonebook entries will be deleted; otherwise Code Error will be displayed.
30
Phonebook (Names)
3.4 Group Info
Names Group Info
After accessing this option, press to highlight the desired group category: Common, Business, Family, Friend, Others or Blacklist, and press the left soft key options:
(Ok). Then, you can select from the following
3.4.1 Ring Tone
Select this option to specify a ring tone for the particular group category.
After accessing this option, you can select:
Local Rings: To select from built-in melodies. Press to scroll through the melodies and listen to a sample of each. After highlighting the desired melody, press the left soft key operation
(Ok) to complete the
Downloading Rings: To select from downloaded melodies. (If there are no downloaded melodies, No Ring will be displayed when you select this option.) Press to scroll through the melodies and listen to a sample of each. After highlighting the desired melody, press the left soft key (Option). Select Set as Ring Tone to select the downloaded melody for the group category; select Delete to delete the downloaded melody
Note: The Blacklist only has a Browse function because the phone will automatically reject any call from this group. Thus, it is not necessary to set a ring tone for the Blacklist group.
3.4.2 Browse
When you access this option, the list of entries in the selected group category will be displayed.
31
Phonebook (Names)
Enter the first letter(s)/digit(s) of the desired entry (name). Press to highlight the entry, and press the left soft key (Detail) to view the details for the entry. For detailed operations, see “Search”. The only difference is that, when you select the group category and press the left soft key (Option), the Group Members option will not be available.
3.5 Speed Dial
Names Speed Dial
Select this option to assign a phone number in the phonebook to one of the speed dial keys ~ for greater convenience when dialing
(refer to “Use Speed Dial” on page 18).
After you access this option, the setting status for each key will be listed.
Press to browse through the speed dial key settings.
If no phone number is assigned to the key, Unset will be displayed.
Press soft key
to highlight the entry for the key and then press the left
(Ok); the phonebook entry list will be displayed. Enter the first letter(s)/digit(s) of the desired entry (name). Press highlight the entry, and press the left soft key entry’s phone number to the key
to
(Ok) to assign the
- If the entry contains only one phone number, the phone number will be assigned to the key immediately
- If the entry contains more than one phone number, phone numbers will be listed. Press the left soft key
to highlight the desired number and press
(Ok) to assign the number to the key
- If the entry contains no phone number, No Record will be displayed
If a phone number has been assigned to the key, the corresponding name or phone number (if the name contains more than one phone
32
Phonebook (Names) number) will be displayed. To change or cancel the setting for this key, press the left soft key (Ok), and then select Edit or Cancel
Note: If the record for a speed dial key is modified in the phonebook, it will automatically be updated for the speed dial key function.
If the record for a speed dial key is deleted from the phonebook, it will also be cancelled for the speed dial key function.
3.6 Memory
Names Memory
Select this option to view the phonebook capacity, including the number of stored records.
33
Menu -> Messages
4. MENU
In standby mode, press the left soft key (Menu) to access the menu.
Press to reach the desired submenu, and press the left soft key
(Ok) to access the submenu.
4.1 Messages
Menu Message
From this submenu, you can read, edit, save and send text messages and emails.
4.1.1 Text Message
Menu Messages Text Message
Select this option to read, edit, save and send text messages.
4.1.1.1 Edit Message
Menu Messages Text Message Edit Message
After you access this option, the last edited message will be displayed
(blank message will be displayed if the phone has been restarted). You can modify that message or delete it by pressing and holding the right soft key (Clear) and re-enter a new message (up to 140 alphanumeric characters or 70 Chinese characters, refer to “Input Method” on page 98).
Then, press the left soft key
Contact or Save.
(Option), and select Send, Insert
The message cannot be empty; otherwise Empty will be displayed when you press the left soft key (Option)
34
Menu -> Messages
Send
After selecting this option, you can send the message in either of the following ways:
Key in the receiver’s phone number, and press the left soft key
(Send) to send the message
Press the left soft key (Contact) to access the phonebook entry list. Enter the first letter(s)/digit(s) of the intended entry (name). Press
to highlight the entry and press the left soft key (Detail). If the entry contains only one phone number, the corresponding phone number will be displayed. Otherwise the entry details will be displayed.
Press to highlight the desired number and press the left soft key
(Ok). When the desired phone number is displayed, press the left soft key (Send) to send the message
Insert Contact
Select this option to insert a phonebook entry’s phone number or email address into the message contents.
After you access this option, the phonebook entry list will be displayed.
Enter the first letter(s)/digit(s) of the intended entry (name). Press highlight the entry and press the left soft key
to
(Detail) to display entry details. Press to highlight the desired phone number or email address, and then press the left soft key phone number or email address.
(Ok) to insert the selected
Save
After you access this option, the message will be saved in Draft.
Draft can store a maximum of 10 messages. If it is full, when you select
Save to store a newly edited message, “Drafts full! Update?” will be
35
Menu -> Messages displayed. You can press the left soft key oldest message
(Ok) to overwrite the
Note: In standby mode, you can send a text message by entering the phone number, pressing the left soft key (Option) and selecting Send Message. Then, follow the prompts to edit the message.
4.1.1.2 Inbox
Menu Messages Text Message Inbox
When a new message is received, the message tone will sound, and the
indicator will be displayed. After a new message is received, in standby mode, press the left soft key message list.
(Read) to access the Inbox
The Inbox can store up to 100 messages. If the Inbox is full, when a new message is received, the phone will replace the oldest message with the newly received message. To avoid losing important messages in the Inbox, periodically erase some existing messages
After you access this option, the message list will be displayed, which shows the message senders’ phone numbers or names (if stored in the phonebook). There is an icon in front of each message: indicates the message has not yet been read; indicates the message has been read
If there are no messages in the Inbox, when you select Inbox, Empty will be displayed
Press soft key
to scroll to the intended message, and then press the left
(Read). Press to view the message contents and details (the sender and received time). Press messages. Press the left soft key following options:
to view other
(Option) to select from the
36
Menu -> Messages
Reply
Select this option to reply to the message. The steps to reply to a text message are similar to those for “Edit Message” on page 34.
The only difference is that, when you select Send, the sender’s phone number will be displayed automatically. You can edit the phone number, and press the left soft key (Send) to send the reply.
Forward
After accessing this option, you can edit and forward the message. The steps to forward a message are the same to those for “Edit Message” on page 34.
Delete
Select this option to delete the message.
When you access this option, “Delete?” will be displayed. Press the left soft key (Ok) to complete the deletion.
Delete All From The Sender
Select this option to delete all text messages from the sender.
When you access this option, “Delete All From The Sender?” will be displayed. Press the left soft key (Ok) to complete the deletion.
Delete All
Select this option to delete all text messages in the Inbox.
When you access this option, “Delete All?” will be displayed. Press the left soft key (Ok) to complete the deletion.
37
Menu -> Messages
Call Back
Select this option to call the sender’s phone number.
Pick Up
This option is available only when the message contains numbers or email addresses.
After you access this option, the numbers and/or email addresses will be extracted from the message contents and listed.
Press to highlight the desired phone number or email address, and then press the left soft key (Ok). You can edit the phone number or email address. (While editing a phone number, you can press call the number.) Then, press the left soft key
to
(Option) and select:
Call: To call the phone number. This option is available only when the edited item is a phone number
Update Contact: To modify an existing phonebook entry with the phone number or email address. The phonebook entry list will be displayed. Enter the first letter(s)/digit(s) of the intended entry (name).
Press to highlight the entry, and then press the left soft key
(Ok). Follow the prompts to modify the entry
New Contact: To add a new phonebook entry with the phone number or email address. Follow the prompts to edit the entry
4.1.1.3 Outbox
Menu Messages Text Message Outbox
The last 100 messages you have sent are stored in the Outbox.
When Outbox is selected, the sent message list will be displayed (if there are no messages in the Outbox, Empty will be displayed). The list shows the receivers’ phone numbers or names (if stored in the phonebook).
38
Menu -> Messages
Messages are listed chronologically; the most recent message sent is highlighted at the top of the list.
Press to reach the desired message and press the left soft key
(Read). Press to view the message contents and details (the receiver and sending time). Press the left soft key
to view other messages. Press
(Option) to select from the following options:
Delete
Select this option to delete the message.
When you access this option, “Delete?” will be displayed. Press the left soft key (Ok) to complete the deletion.
Forward
After accessing this option, you can edit and forward the message. The steps to forward a message are the same as those for “Edit Message” on page 34.
Delete All
Select this option to delete all text messages in the Outbox.
When you access this option, “Delete All?” will be displayed. Press the left soft key (Ok) to complete the deletion.
4.1.1.4 Draft
Menu Messages Text Message Draft
Up to 10 edited messages can be stored in Draft.
When you access the Draft option, the draft message list will be displayed
(if there are no messages in Draft, Empty will be displayed). Press to highlight the desired draft message and press the left soft key
39
Menu -> Messages
(Read) to read it. Press to view other draft messages.
to view the message contents. Press
While reading the message, you can press the left soft key and select from the following options:
(Option)
Edit
Select this option to edit the draft message. Refer to “Edit Message” on page 34 for details.
Send
Select this option to send the draft message. Refer to “Send” under the
Edit Message option on page 35 for details.
Delete
Select this option to delete the draft message.
When you access this option, “Delete?” will be displayed. Press the left soft key (Ok) to complete the deletion.
Delete All
Select this option to delete all text messages in the Draft.
When you access this option, “Delete All?” will be displayed. Press the left soft key (Ok) to complete the deletion.
4.1.1.5 Config
Menu Messages Text Message Config
This option enables you to perform the following text message settings:
Valid Period
If the message service center cannot send a text message temporarily,
40
Menu -> Messages the message service center will store the message. You can set the duration of time that sent text messages can be stored in the message service center.
After accessing this option, select 12 Hours, One Day, One Week or Max
Period.
SMS Report
If the SMS Report function is active, when a text message has been successfully sent, the phone will receive a notification.
After accessing this option, select On or Off to activate or deactivate this function.
4.1.1.6 Status
Menu Messages Text Message Status
Select this option to view the Inbox/Outbox/Draft capacity, including the number of stored text messages.
4.1.2 Email
Menu Messages Email
Select this option to read, edit, save and send emails.
4.1.2.1 Edit Email
Menu Messages Email Edit Email
Select this option to edit and send an email by observing the following operations:
1. Edit receivers: Press to highlight the desired receiver type:
Receivers, Cc (Carbon Copy) or Bcc (Blind Carbon Copy), and then press the left soft key (Edit). Enter the receiver’s email address in either of the following ways:
- Key in the receiver’s email address
41
Menu -> Messages
- Press the left soft key (Contact) to access the phonebook entry list. Enter the first letter(s)/digit(s) of the intended entry (name).
Press to highlight the entry and press the left soft key
(Detail) to display the entry details, with the email address highlighted. Press the left soft key address
(Ok) to confirm the email
When the desired email address is entered, press the left soft key
(Ok) and select
- Add New: To add another email address
- Finish: To complete email addresses editing for the receiver type.
Each receiver type can contain a maximum of 10 email addresses
- To delete an email address, press address and press the left soft key displayed. Press the left soft key deletion
to highlight the email
(Delete). “Delete?” will be
(Ok) to complete the
Repeat this step until all intended receivers for each receiver type are entered.
2. Edit subject: Press to highlight the Subject item and press the left soft key (Edit). Enter the email subject (50 alphanumeric characters or 25 Chinese characters maximum, refer to “Input
Method” on page 98), and then press the left soft key (Ok).
3. Add attachment (50Kb maximum): Pres to highlight the
Attachment item and press the left soft key (Edit). Select
Picture or Ring Tone to display the downloaded picture or melody list
- Picture: Press to highlight the desired picture option, and then press the left soft key (Ok) to view the picture. Press
42
Menu -> Messages
to view other pictures. When the desired picture is displayed, press the left soft key (Ok) to confirm
- Ring Tone: Press to scroll through the melodies and listen to a sample of each. After highlighting the desired melody, press the left soft key (Ok) to confirm
4. Edit contents: Press to highlight the Content item and press the left soft key (Edit). Enter the email contents (9000 alphanumeric characters or 4500 Chinese characters maximum, refer to “Input Method” on page 98), and then press the left soft key
(Ok).
5. Press the left soft key (Option), and then select Send to send the email.
To save the edited email in Draft, press the left soft key (Option), and then select Save
Emails’ attachments cannot be saved. When you select Save to store an email containing an attachment, “The Attachment Cannot Be
Saved” will be displayed. You can press the left soft key save the email except for the attachment
(Ok) to
To modify an already edited item: press to highlight the item; press the left soft key (Option), and then select Edit
4.1.2.2 Inbox
Menu Messages Email Inbox
The Inbox can store up to 30 received emails. After you access this option, the email list will be displayed, which shows the email senders’ email addresses or names (if stored in the phonebook). There is an icon in front of each email: indicates the email has not yet been read; indicates the email has been read
43
Menu -> Messages
If there are no emails in the Inbox, when you select Inbox, Empty will be displayed
Press to scroll to the intended email, and then press the left soft key
Press
(Read). Press to view the email contents and details.
to view other emails. Press the left soft key to select from the following options:
(Option)
Reply
Select this option to reply to the email to the sender. The operations are similar to those for “Edit Email” on page 41.
The only difference is that, the sender’s email address will be automatically added to the Receivers item.
Reply All
Select this option to reply to the email to the sender and all receivers. The operations are similar to those for “Edit Email” on page 41.
The only difference is that, email addresses of the sender and receivers will be automatically added for the corresponding receiver type.
Forward
After accessing this option, you can edit and forward the email. The steps to forward an email are the same to those for “Edit Email” on page 41.
The attachment of the email cannot be forwarded
Delete
Select this option to delete the email.
When you access this option, “Delete?” will be displayed. Press the left soft key (Ok) to complete the deletion.
44
Menu -> Messages
Delete All
Select this option to delete all email in the Inbox.
When you access this option, “Delete All?” will be displayed. Press the left soft key (Ok) to complete the deletion.
View Receivers
After you access this option, all receivers’ email addresses or names (if stored in the phonebook) will be listed. Press to hig hlight the desired email address or name, and then press the left soft key select:
(Option ) to
Send Email: To send an email to the email address. Refer to “Edit
Email” on page 41 for detailed operations
Update Contact: To modify an existing phonebook entry with the email address. The phonebook entry list will be displayed. Enter the first letter(s)/digit(s) of the intended entry (name). Press highlight the entry, and then press the left soft key the prompts to modify the entry
to
(Ok). Follow
New Contact: To add a new phonebook entry with the email address.
Follow the prompts to edit the entry
View Attachment
This option is available only when the email contains an attachment.
After you select this option, the phone will start to acquire the attachment.
When the reception is complete, you can press the left soft key
(Save) to store the attachment.
45
Menu -> Messages
4.1.2.3 Outbox
Menu Messages Email Outbox
The last 10 emails you have sent are stored in the Outbox.
When Outbox is selected, the sent email list will be displayed (if there are no emails in the Outbox, Empty will be displayed). The list shows the receivers’ email addresses or names (if stored in the phonebook).
Press to reach the desired email and press the left soft key
(Read). Press view other emails. Press the left soft key following options:
to view the email contents and details. Press to
(Option) to select from the
Delete
Select this option to delete the email.
When you access this option, “Delete?” will be displayed. Press the left soft key (Ok) to complete the deletion.
Forward
After accessing this option, you can edit and forward the email. The steps to forward an email are the same to those for “Edit Email” on page 41.
Delete All
Select this option to delete all emails in the Outbox.
When you access this option, “Delete All?” will be displayed. Press the left soft key (Ok) to complete the deletion.
View Receivers
After you access this option, all receivers’ email addresses or names (if
46
Menu -> Messages stored in the phonebook) will be listed. Press to hig hlight the desired email address or name, and then press the left soft key select:
(Option ) to
Send Email: To send an email to the email address. Refer to “Edit
Email” on page 41 for detailed operations
Update Contact: To modify an existing phonebook entry with the email address. The phonebook entry list will be displayed. Enter the first letter(s)/digit(s) of the intended entry (name). Press highlight the entry, and then press the left soft key the prompts to modify the entry
to
(Ok). Follow
New Contact: To add a new phonebook entry with the email address.
Follow the prompts to edit the entry
4.1.2.4 Receive New
Menu Messages Email Receive New
Select this option to initiate the reception of new emails.
When the operation is complete, the phone will prompt you and display the Inbox email list.
4.1.2.5 Draft
Menu Messages Email Draft
Up to five edited emails can be stored in Draft.
When you access the Draft option, the draft email list will be displayed (if there are no emails in Draft, Empty will be displayed). Press to highlight the desired draft email and press the left soft key (Edit).
Then, you can edit the draft email. Refer to “Edit Email” on page 41.
While highlighting an already edited item, press the left soft key (Option), and then you can select:
47
Menu -> Messages
Send
Select this option to send the email.
Edit
Select this option to edit the selected item.
Delete
Select this option to delete the draft email.
When you access this option, “Delete?” will be displayed. Press the left soft key (Ok) to complete the deletion.
Delete All
Select this option to delete all emails in the Draft.
When you access this option, “Delete All?” will be displayed. Press the left soft key (Ok) to complete the deletion.
Save
Select this option save the email.
4.1.2.6 Config
Menu Messages Email Config
This option enables you to configure up to four email boxes.
After you access this option, the email box list will be displayed. Press
to highlight the desired email box and press the left soft key
(Ok). The following will be available:
Box Name
Select this option to set the name for the email box.
48
Menu -> Messages
After accessing this option, press the left soft key box name and press the left soft key operation.
(Edit). Edit the
(Ok) to complete the
Email Address
Select this option to set the email address for the email box.
If no email address has been specified for the email box, the email address editing screen will be displayed after you select this option.
Otherwise, the original email address will be displayed. You need to press the left soft key (Edit) to access the email address editing screen.
(Ok) to complete Edit the email address and press the left soft key the operation.
Server Account
Select this option to store the email account’s username and password:
1. After accessing this option, follow the prompts to edit the username and press the left soft key (Ok).
2. If no password has been stored, the password editing screen will be displayed. Otherwise, the original password will be displayed (with each letter/digit displayed as *). You need to press the left soft key
(Edit) to access the password editing screen.
3. Edit the password and press the left soft key the operation.
Outgoing Server
(Ok) to complete
Select this option to set the outgoing mail server (SMTP) for the email box.
After accessing this option, follow the prompts to edit the SMTP server address and press the left soft key (Ok). Edit the SMTP server port
49
Menu -> Messages number and press the left soft key (Ok) to complete the operation.
Incoming Server
Select this option to set the incoming mail server (POP3) for the email box.
After accessing this option, follow the prompts to edit the POP3 server address and press the left soft key number and press the left soft key
(Ok). Edit the POP3 server port
(Ok) to complete the operation.
Enable/Stop
Select Enable or Stop to activate or deactivate the email box.
Only one of the four email boxes can be activated. Prior to activating an email box, you need to deactivate the email box in use.
4.1.2.7 Status
Menu Messages Email Status
Select this option to view the Inbox/Outbox/Draft capacity, including the number of stored emails.
50
Menu -> Call Log
4.2 Call Log
Menu Call Log
Your phone records missed, received and dialed calls as well as their call durations.
In standby mode, you can press , or to quickly access
Missed Log, Received Log or Dialed Log (refer to page 24 “Call Log
Shortcut”).
4.2.1 Missed Log
Menu Call Log Missed Log
This option enables you to view the last 20 missed calls.
After you access this option, the phone will display the missed call list, with each log displaying the caller’s phone number or name (if the number is stored in the phonebook). If a caller has called your phone repeatedly, the corresponding log will also display the number of times the caller has called. Press to browse through the missed call logs.
Note: This function only works in networks that support the Caller
ID service; otherwise No Caller ID will be displayed in the missed log. If the caller’s phone is set to block the caller’s number, No
Caller ID will also be displayed.
If there are missed calls from phone numbers stored under the same phonebook name, these calls will be recorded in one missed call log.
When highlighting the desired log, you can dial the caller’s phone number by pressing :
If the call log contains only one phone number, the phone number will be dialed immediately
51
Menu -> Call Log
If the call log contains more than one phone number, phone numbers will be listed. Press the left soft key
to highlight the desired number and press
(Call) or the key to call the number
After reaching the desired log, press the left soft key following options will be available:
(Option). The
4.2.1.1 View
Select this option to view details of the selected call log, including the caller’s number and calling date/time of each missed call from this caller.
If the call log contains only one phone number, details of the call log will be displayed immediately
If the call log contains more than one phone number, phone numbers will be listed. Press the left soft key number.
to highlight the desired number and press
(Ok) to view details of missed call(s) from this
When a call log’s details are displayed, you can press missed call logs.
to view other
When a call log’s details are displayed, you can press the left soft key
(Option) and then select Pick Up Number, Send Message, Delete or Call (call the number).
4.2.1.2 Pick Up Number
After you access this option, the caller’s phone number(s) will be displayed:
If the call log contains only one phone number, the phone will access this phone number’s editing mode
If the call log contains more than one phone number, phone numbers will be listed. Press to highlight the desired number and press
52
Menu -> Call Log the left soft key mode
(Ok) to access the selected number’s editing
You can edit the phone number, and then save or dial the edited number:
Save Number
After editing the number, press the left soft key
Contact or Update Contact.
(Save). Select New
New Contact: Select this option to add a new phonebook entry with the phone number. Follow the prompts to edit phone numbers, the name, group category or email address
Update Contact: Select this option to modify an existing phonebook entry with the phone number. The phonebook entry list will be displayed. Enter the first letter(s)/digit(s) of the intended entry (name).
Press to highlight the entry, and then press the left soft key
(Ok). Follow the prompts to modify the entry
Dial Number
After editing the number, press to call the displayed number.
4.2.1.3 Send Message
Select this option to send a text message to the caller. For detailed operations, refer to “Edit Message” on page 34.
If the call log contains only one phone number, the phone will access message content editing mode
If the call log contains more than one phone number, phone numbers will be listed. Press the left soft key
to highlight the desired number and press
(Ok) to access message content editing mode
53
Menu -> Call Log
4.2.1.4 Delete
Select this option to delete the selected call log. When you access this option, “Delete?” will be displayed. Press the left soft key complete the deletion.
(Ok) to
4.2.1.5 Delete All
Select this option to delete all missed call logs. Follow the prompts to enter the security code and press the left soft key the deletion.
(Ok) to complete
4.2.2 Received Log
Menu Call Log Received Log
This option enables you to view the last 20 received calls.
After you access this option, the phone will display the received call list, with each log displaying the caller’s phone number or name (if the number is stored in the phonebook). Press call logs.
to browse through the received
Note: This function only works in networks that support the Caller
ID service; otherwise No Caller ID will be displayed in the received log. If the caller’s phone is set to block the caller’s number, No
Caller ID will also be displayed.
If there are received calls from phone numbers stored under the same phonebook name, these calls will be recorded in one received call log.
When highlighting the desired log, you can dial the caller’s phone number by pressing :
If the call log contains only one phone number, the phone number will be dialed immediately
54
Menu -> Call Log
If the call log contains more than one phone number, phone numbers will be listed. Press the left soft key
to highlight the desired number and press
(Call) or the key to call the number
After reaching the desired log, press the left soft key following options will be available:
(Option). The
4.2.2.1 View
Select this option to view details of the selected call log, including the caller’s number, calling date/time of each received call from this caller and duration of each call.
If the call log contains only one phone number, details of the call log will be displayed immediately
If the call log contains more than one phone number, phone numbers will be listed. Press the left soft key number.
to highlight the desired number and press
(Ok) to view details of received call(s) from this
When a call log’s details are displayed, you can press received call logs.
to view other
When a call log’s details are displayed, you can press the left soft key
(Option) and then select Pick Up Number, Send Message, Delete or Call (call the number).
4.2.2.2 Pick Up Number
After selecting this option, the caller’s phone number(s) will be displayed.
If the call log contains only one phone number, the phone will access this phone number’s editing mode
If the call log contains more than one phone number, phone numbers will be listed. Press to highlight the desired number and press
55
Menu -> Call Log the left soft key mode
(Ok) to access the selected number’s editing
You can edit the phone number, and then save or dial the edited number:
Save Number
After editing the number, press the left soft key
Contact or Update Contact.
(Save). Select New
New Contact: Select this option to add a new phonebook entry with the phone number. Follow the prompts to edit phone numbers, the name, group category or email address
Update Contact: Select this option to modify an existing phonebook entry with the phone number. The phonebook entry list will be displayed. Enter the first letter(s)/digit(s) of the intended entry (name).
Press to highlight the entry, and then press the left soft key
(Ok). Follow the prompts to modify the entry
Dial Number
After editing the number, press to call the displayed number.
4.2.2.3 Send Message
Select this option to send a text message to the caller. For detailed operations, refer to “Edit Message” on page 34.
If the call log contains only one phone number, the phone will access message content-editing mode
If the call log contains more than one phone number, phone numbers will be listed. Press the left soft key
to highlight the desired number and press
(Ok) to access message content editing mode
56
Menu -> Call Log
4.2.2.4 Delete
Select this option to delete the selected call log. When you access this option, “Delete?” will be displayed. Press the left soft key complete the deletion.
(Ok) to
4.2.2.5 Delete All
Select this option to delete all received call logs. Follow the prompts to enter the security code and press the left soft key the deletion.
(Ok) to complete
4.2.3 Dialed log
Menu Call Log Dialed Log
This option enables you to view the last 20 dialed calls.
After you access this option, the phone will display the dialed call list, with each log displaying the caller’s phone number or name (if the number is stored in the phonebook). Press logs.
to browse through the dialed call
Note: If you dialed phone numbers stored under the same phonebook name, these calls will be recorded in one dialed call log.
When highlighting the desired log, you can dial the caller’s phone number by pressing :
If the call log contains only one phone number, the phone number will be dialed immediately
If the call log contains more than one phone number, phone numbers will be listed. Press the left soft key
to highlight the desired number and press
(Call) or the key to call the number
After reaching the desired log, press the left soft key (Option). The
57
Menu -> Call Log following options will be available:
4.2.3.1 View
Select this option to view details of the selected call log, including the dialed number, calling date/time of each call and duration of each call.
If the call log contains only one phone number, details of the call log will be displayed immediately
If the call log contains more than one phone number, phone numbers will be listed. Press the left soft key number
to highlight the desired number and press
(Ok) to view details of dialed call(s) for this
When a call log’s details are displayed, you can press dialed call logs.
to view other
When a call log’s details are displayed, you can press the left soft key
(Option) and then select Pick Up Number, Send Message, Delete or Call (call the number).
4.2.3.2 Pick Up Number
After selecting this option, the caller’s phone number will be displayed.
If the call log contains only one phone number, the phone will access this phone number’s editing mode
If the call log contains more than one phone number, phone numbers will be listed. Press the left soft key mode
to highlight the desired number and press
(Ok) to access the selected number’s editing
You can edit the phone number, and then save or dial the edited number:
58
Menu -> Call Log
Save Number
After editing the number, press the left soft key
Contact or Update Contact.
(Save). Select New
New Contact: Select this option to add a new phonebook entry with the phone number. Follow the prompts to edit phone numbers, the name, group category or email address
Update Contact: Select this option to modify an existing phonebook entry with the phone number. The phonebook entry list will be displayed. Enter the first letter(s)/digit(s) of the intended entry (name).
Press to highlight the entry, and then press the left soft key
(Ok). Follow the prompts to modify the entry
Dial Number
After editing the number, press to call the displayed number.
4.2.3.3 Send Message
Select this option to send a text message to the caller. For detailed operations, refer to “Edit Message” on page 34.
If the call log contains only one phone number, the phone will access message content editing mode
If the call log contains more than one phone number, phone numbers will be listed. Press the left soft key
to highlight the desired number and press
(Ok) to access message content editing mode
4.2.3.4 Delete
Select this option to delete the selected call log. When you access this option, “Delete?” will be displayed. Press the left soft key complete the deletion.
(Ok) to
59
Menu -> Call Log
4.2.3.5 Delete All
Select this option to delete all dialed call logs. Follow the prompts to enter the security code and press the left soft key deletion.
(Ok) to complete the
4.2.4 Duration
Menu Call Log Duration
This option enables you to view the approximate duration of the last call, all received calls, all dialed calls, or the duration of all calls.
After accessing this option, press to view the duration of the last call
(Last Call), received calls (Received), dialed calls (Dialed), as well as the duration of all calls (Total Time). The time will be displayed in
“hh:mm:ss” format.
To clear the timer, press the left soft key prompts to enter the security code and then press the left soft key
(Ok) to complete the operation.
(Clear). Follow the
60
Menu -> Profiles
4.3 Profiles
Menu Profiles
This submenu enables you to customize the phone alert settings to suit a variety of environments.
When you access this submenu, the profile list will be displayed; the current profile will be highlighted. You can customize each profile, and activate the one that suits your environment. The phone will utilize all the current profile’s settings.
In standby mode, you can press submenu.
Standard is the factory-preset profile.
to quickly access the Profiles
4.3.1 Standard
Menu Profiles Standard
4.3.1.1 Enable
Menu Profiles Standard Enable
Select this option to activate the selected profile.
4.3.1.2 Set
Menu Profiles Standard Set
This option enables you to change the selected profile’s settings, including:
Ring Volume
Select this option to adjust the ring volume level for incoming calls, new messages, memo alert and the alarm clock.
61
Menu -> Profiles
Press or to increase the volume; press or to decrease the volume. As you scroll through the volume levels, a sample of each will sound. After reaching the desired volume level, press the left soft key (Ok) to complete the operation.
Ring Mode
This function enables you to define how the phone will notify you of incoming calls, new messages, memo alert and the alarm clock. The available options include: Ascending, Ringing, Ring Once, Vibration,
Vibration And Ring, Ring After Vibration and Mute.
If the Ring Mode is set to Vibration or Mute, the keypad tone, alert tone and flip tone will be deactivated. If the Ring Mode is set to any other option, the Keypad Tone, Alert Tone and Flip Tone settings will take effect
Ring Tone
This option enables you to select a special ring tone for incoming calls.
After accessing this option, you can select:
Local Rings: To set a built-in melody as incoming call ring tone. Press
to scroll through the melodies and listen to a sample of each.
After highlighting the desired melody, press the left soft key to complete the operation
(Ok)
Downloading Rings: To set a downloaded melody as incoming call ring tone. (If there are no downloaded melodies, No Ring will be displayed when you select this option.) Press to scroll through the melodies and listen to a sample of each. After highlighting the desired melody, press the left soft key (Option). Select Set as
Ring Tone to specify the downloaded melody for incoming calls; select Delete to delete the downloaded melody
62
Menu -> Profiles
Message Tone
Select this option to specify the incoming message alert tone. Press to scroll through the message tones and listen to a sample of each. After highlighting the desired message tone, press the left soft key to complete the operation.
(Ok)
Alarm Tone
This option enables you to select an alarm tone for the alarm clock.
After accessing this option, you can select:
Local Rings: To set a built-in melody as alarm tone. Press to scroll through the melodies and listen to a sample of each. After highlighting the desired melody, press the left soft key complete the operation
(Ok) to
Downloading Rings: To set a downloaded melody as alarm tone.
Press to scroll through the melodies and listen to a sample of each. After highlighting the desired melody, press the left soft key
(Option). Select Set as Ring Tone to specify the downloaded melody; select Delete to delete the downloaded melody
Memo Alert
This option enables you to specify the memo alert tone.
After accessing this option, you can select:
Local Rings: To set a built-in melody as memo alert tone. Press to scroll through the melodies and listen to a sample of each. After highlighting the desired melody, press the left soft key complete the operation
(Ok) to
63
Menu -> Profiles
Downloading Rings: To set a downloaded melody as memo alert tone. Press to scroll through the melodies and listen to a sample of each. After highlighting the desired melody, press the left soft key
(Option). Select Set as Ring Tone to specify the downloaded melody; select Delete to delete the downloaded melody
Keypad Tone
Select this option to set the tone the phone sounds when you press the phone’s keys. Three options are available: Standard Keytone, Key
Music and Off.
If the Keypad Tone is not set to Off, when the phone is switched on/off, the power-on/off melody will sound; when an operation on the phone is completed or fails, the success/failure tone will sound
If the Ring Mode is set to Vibration or Mute, the keypad tone will be deactivated regardless of the Keypad Tone settings
Alert Tone
If this function is activated, a warning tone will sound when the battery power is low; a tone will sound when the phone is registered with the service network for the first time.
Select On or Off to activate or deactivate this function.
Flip Tone
If this function is activated, a tone will sound when the flip cover is opened or closed. Select On or Off to activate or deactivate this function.
If the Ring Mode is set to Vibration or Mute, the flip tone will be deactivated regardless of the Flip Tone settings
64
Menu -> Profiles
4.3.2 Meeting
Menu Profiles Meeting
This profile is suitable for meeting environments. You can preset this option to meet your needs by following the same steps specified in
“Standard”.
4.3.3 Outdoor
Menu Profiles Outdoor
This profile is suitable for outdoor environments. You can preset this option to meet your needs by following the same steps specified in
“Standard”.
4.3.4 User Define
Menu Profiles User Define
This profile can be tailored for other environments. You can preset this option to meet your needs by following the same steps specified in
“Standard”.
65
Menu -> Settings
4.4 Settings
Menu Settings
From this submenu, you can perform various phone settings.
4.4.1 Date/Time
Menu Settings Date/Time
This option enables you to perform date and time settings for the phone.
4.4.1.1 Date/Time
Menu Settings Date/Time Date/Time
Select this option to set the phone’s date and time.
After accessing the option, enter a date from 2004-01-01 to 2019-12-31, and then enter the time in the corresponding time format. If the time format is set to 12 Hour, press selection zone. Press the left soft key operation.
to select AM or PM at the AM/PM
(Ok) to complete the
When you key in the date or time, you can press cursor and modify the number
to move the
The cursor will advance if the number entered is valid; otherwise, the phone will sound an error tone (if the Keypad Tone is not set to Off)
4.4.1.2 Time Format
Menu Settings Date/Time Time Format
This option enables you to set the time format.
After accessing this option, select 12 Hour or 24 Hour.
66
Menu -> Settings
4.4.1.3 Date Format
Menu Settings Date/Time Date Format
This option enables you to set the date format.
After accessing this option, select Day/Month/Year, Month/Day/Year or
Year/Month/Day.
4.4.2 Display
Menu Settings Display
You may set the display for the LCD screen as follows:
4.4.2.1 Scheme
Menu Settings Display Scheme
This option enables you to select the picture display in standby mode.
After accessing this option, you can select:
Local Pictures: To set a built-in picture as standby display. Press
(Ok) to preview the highlighted picture. When viewing a picture, you can press to browse through other pictures. When the desired picture is displayed, press the left soft key complete the operation
(Ok) to
Download Pictures: To set a downloaded picture as standby display.
(If there are no downloaded pictures, No Pictures will be displayed when you select this option.) Press (Ok) to preview the highlighted picture. When viewing a picture, you can press to browse through other pictures. When the desired picture is displayed, press the left soft key (Option). Select Set as Wallpaper to set this downloaded picture as standby display; select Delete to delete this downloaded picture
67
Menu -> Settings
4.4.2.2 Greetings
Menu Settings Display Greetings
This option enables you to set the phone’s greetings, which will be briefly displayed each time the phone is switched on.
After accessing this option, edit the greetings (16 alphanumeric characters or 8 Chinese characters) and then press the left soft key
(Ok) to complete the operation.
4.4.2.3 Backlight
Menu Settings Display Backlight
The LCD screen and keypad will light when you press keys or the phone receives a call or message. This option enables you to define how long the backlight will last after the last keystroke.
Available options include: 10 seconds, 30 seconds, 60 seconds and
Always Light.
4.4.2.4 Contrast
Menu Settings Display Contrast
This option enables you to specify the contrast level for the LCD screen.
There are six contrast levels. Press or to increase the contrast; press or to decrease the contrast. The screen display will reflect the contrast setting. After reaching the desired contrast level, press the left soft key (Ok) to complete the operation.
4.4.3 Set Handset
Menu Settings Set Handset
You can set the phone as follows:
68
Menu -> Settings
4.4.3.1 Answer Mode
Menu Settings Set Handset Answer Mode
This option enables you to select how to answer an incoming call.
After you access this option, the following will be available:
Talk Key
Press the left soft key incoming call.
Any Key
(Answer) or the key to answer an
Press any key to answer an incoming call except the right soft key the key and the key.
,
Flip Key
Flip open the phone to answer an incoming call.
If the flip cover is open when there is an incoming call, press the left soft key (Answer) or the key to answer the call
4.4.3.2 Language
Menu Settings Set Handset Language
This option enables you to select the language of the phone’s text display.
You can select English or 简体ä¸æ–‡ (Simplified Chinese).
4.4.3.3 Earphone Auto Answer
Menu Settings Set Handset Earphone Auto Answer
If the Earphone Auto Answer function is active and an earphone is connected to the phone, the phone will automatically answer incoming
69
Menu -> Settings calls.
After accessing this option, select Enable or Disable to activate or deactivate.
4.4.4 Set Security
Menu Settings Set Security
This option enables you to set the security level to protect your phone.
After accessing this option, you will be prompted to enter the user definable security code (i.e. password). Key in the security code and press the left soft key (Ok). If correct, the following options will be available (otherwise Failed will be displayed).
Note: The initial default security code is “888888”.
4.4.4.1 PowerOn Code
If this function is active, the security code will need to be entered each time you switch on the phone.
After accessing this option, select Disable or Enable to deactivate or activate.
4.4.4.2 Change Code
Select this option to change the security code. Observe the following steps:
1. At the New Code column, enter a new security code (0~8 digits long, using numbers 0~9).
2. Press to move the cursor to the Confirm Code column.
3. Enter the new security code again and press the left soft key to complete the operation.
The security code is “888888” by default
(Ok)
70
Menu -> Settings
If the new security code entered in step 3 is different from that entered in step 1, when you press the left soft key will be displayed
(Ok), Not Matched
To avoid any inconvenience, please remember the new security code
4.4.4.3 Reset All
Select this option to restore your phone’s default settings.
When you access this option, “Reset All?” will be displayed. Press the left soft key (Ok) to complete the operation.
This operation will not delete the phonebook entries or call logs. It cannot change the phone’s date and time either.
Phone Default Settings
Functions Default Settings
Profiles Standard
Listening Volume
Call Log (Duration)
Speed Dial Setting
3
00:00:00
Unset
Phonebook Group (Ring Tone)
Time Format
Date Format
Ring Tone 5
12 Hour
Year/Month/Day
Greetings (Blank)
Contrast 3
Answer Mode Talk Key
Language English
71
Menu -> Settings
Functions
Earphone Auto Answer
Security Code
PowerOn Code
Alarm (On/Off)
Alarm (Set Time)
Alarm (Snooze)
Alarm (Set Cycle)
Sand Volleyball (Game Level)
Gobang (Game Mode)
Default Settings
Disable
888888
Disable
Off
08:00
Off
Once
Beginner
White Chess
Profiles Default Settings
Profile
Options
Standard Meeting Outdoor
User
Define
Ring Volume 4 0 4 4
Ring Mode Ringing Vibration Ringing Ringing
Ring Tone
Message
Tone
Alarm Tone
Memo Alert
Keypad Tone
Alert Tone
Flip Tone
Ring Tone
6
Ring Tone
6
Ring Tone
6
Ring Tone
6
Ring Tone
1
Ring Tone
3
Ring Tone
3
Ring Tone
1
Ring Tone
3
Ring Tone
3
Ring Tone
1
Ring Tone
3
Ring Tone
3
Ring Tone
1
Ring Tone
3
Ring Tone
3
Standard
Keytone
Off
Standard
Keytone
Standard
Keytone
On On Off On
On On Off On
72
Menu -> Tools
4.5 Tools
Menu Tools
From this submenu, you can set the Alarm, view the Calendar, set memos, use the Calculator or change the current Time Zone.
4.5.1 Alarm
Menu Tools Alarm
This function enables you to set the alarm for a specified time. Once activated, the alarm indicator will be displayed.
When the preset alarm time expires, the phone will sound the alarm; an alarm icon and the current time will be displayed. The alarm will sound for 30 seconds unless dismissed
To dismiss the alarm and return to standby mode, press any key or close or open the flip cover
If the alarm time expires during a call, the alarm will not sound
Set the alarm function by observing the following operations:
4.5.1.1 On/Off
Menu Tools Alarm On/Off
After accessing this option, select On or Off to activate or deactivate the alarm function.
4.5.1.2 Set Time
Menu Tools Alarm Set Time
Select this option to set the alarm time. Enter the time in 24-hour format, and then press the left soft key (Ok) to complete the operation.
When you key in the time, you can press modify the number
to move the cursor and
73
Menu -> Tools
The cursor will advance if the number entered is valid; otherwise, the phone will sound an error tone (if the Keypad Tone is not set to Off)
4.5.1.3 Snooze
Menu Tools Alarm Snooze
If this function is activated, the alarm will repeat 3 times at 5-minute intervals after the original alarm time expires.
You can select On or Off to activate or deactivate this function.
4.5.1.4 Set Cycle
Menu Tools Alarm Set Cycle
This option enables you to set the alarm cycle period.
Once
The alarm sounds only once. The setting will only be valid for 24 hours after the alarm function has been activated and the alarm time has been set.
After the alarm stops, the alarm function will be deactivated; the indicator will disappear.
Everyday
The alarm sounds every day at the preset time.
Mon. ~ Fri.
The alarm sounds at the preset time on weekdays.
Mon. ~ Sat.
The alarm sounds at the preset time from Monday to Saturday.
74
Menu -> Tools
4.5.2 Calendar
Menu Tools Calendar
This function enables you to view the calendar and set up to 10 memos.
In standby mode, if the memo time expires, the memo details will be displayed; the memo alert will sound (if the memo alert tone is activated).
Press any key to return to standby mode.
After you access this option, the calendar will be displayed with the current date highlighted. The dates marked red indicates there are memos specified for these days.
You can press to select the desired date. Press the left soft key
(Option); the following options will be available:
4.5.2.1 Choose Date
When you access this option, you can enter a date from 1900-01-01 to
2099-12-31, and then press the left soft key calendar with the specified date highlighted.
(Ok) to view the
4.5.2.2 Edit Memo
Select this option to set a memo.
Note: If the memo memory is full, when you select this option,
Memo Full will be displayed.
Observe the following steps to set a memo:
1. Enter the memo contents (up to 32 alphanumeric characters or 16
Chinese characters), and then press the left soft key (Ok).
Awake Time will be displayed. The default date is the selected date; the default time is “08:00”.
- The memo content cannot be empty; otherwise Empty will be displayed when you press the left soft key (Ok)
75
Menu -> Tools
2. Enter a date from 2004-01-01 to 2019-12-31, and then enter the time in
24-hour format. Press the left soft key (Ok).
- The date and time of the newly added memo cannot be identical to those of an existing memo. Otherwise, Time Overlap will be displayed when you press the left soft key (Ok)
- If the entered date and time is earlier than the phone’s current date and time, Time Passed will be displayed when you press the left soft key (Ok). You can press the left soft key confirm and complete the memo edition
(Ok) to
3. Select Enable or Disable to activate or deactivate the memo alert tone
(awake sound).
4.5.2.3 View Memo
This option enables you to view the memos for the currently highlighted date (Today’s Memo) or all memos (All Memos).
After you select Today’s Memo or All Memos, press through the memos.
to browse
To modify or delete the currently displayed memo, press the left soft key
(Option), and then select Modify or Delete.
4.5.2.4 Delete Memo
You can select from the following options to delete memos one by one or all at once.
One By One
After accessing this function, press and then press the left soft key
to display the intended memo,
(Delete). “Delete?” will be displayed; press the left soft key (Ok) to complete the deletion.
76
Menu -> Tools
All
When you access this option, the prompt Enter Code will be displayed.
Enter the security code, and press the left soft key (Ok). If the code is correct, all memos will be deleted; otherwise Code Error will be displayed.
4.5.3 Calculator
Menu Tools Calculator
This function enables you to add, subtract, multiply and divide.
1. The screen will initially display the number “0”. Enter the first number to be calculated.
- To enter a minus sign, press (only the first number can be made negative); to enter a decimal point, press
2. Press , , or to enter the plus, minus, multiplication or division signs respectively.
3. Enter the second number.
- To enter “0”, press and ; “0.0” will be displayed
4. Press to display the calculation result.
- To conduct further calculations from this result, repeat steps 2~4
5. When starting a new calculation, if the result from the last calculation is not “0”, press the right soft key (Clear) to initialize.
To delete the character you just entered, press the right soft key
(Clear); to erase all entered characters, press and hold the right soft key (Clear)
A maximum of 9 digits (including minus sign and decimal point) can be entered at one time
77
Menu -> Tools
If the formula violates mathematical principles (for example, 5/0),
Error will be displayed
If the absolute value of the calculation result exceeds 999,999,999,
Overflow will be displayed
4.5.4 Time Zone
Menu Tools Time Zone
This option enables you to view the time of some cities in different time zones in the world.
After you access this option, the phone’s current time zone and city will be displayed, as well as the current date and time. Press to view other time zones; press displayed time zone.
to browse through the cities in the currently
When viewing a time zone, you can press the left soft key and then perform the following operations:
4.5.4.1 Set to Local Time
(Option),
Select this option to set this time zone as the phone’s current time zone.
The phone’s time will change accordingly.
4.5.4.2 Enable/Disable DST
Select this option to change the phone’s Daylight Saving Time (DST) setting. The phone’s time will change accordingly.
78
Menu -> Games
4.6 Games
Menu Games
There are two games available: Sand Volleyball and Gobang.
4.6.1 Sand Volleyball
Menu Games Sand Volleyball
Every time the ball drops into the opponent’s side, one point is won. The player with seven points wins one bout. The player who wins three bouts is the winner.
To jump, press press or
, ,
,
or
, , or . To move leftwards,
. To move rightwards, press
. To pause or continue, press the left soft key key. To quit the game, press the right soft key (Exit).
, ,
or the
4.6.1.1 Begin Game
If you exited the last game before it was over, Continue Play or New
Game will be displayed when you select this option. Otherwise, a new game will start.
Continue Play
Select this option to continue the unfinished game.
New Game
Select this option to start a new game.
4.6.1.2 Game Level
Select Beginner or Expert to set the play level of the game.
79
Menu -> Games
4.6.1.3 Game Rule
Select this option to view the rules of the game. Press to scroll though the rules.
4.6.2 Gobang
Menu Games Gobang
The object of the game is to line up five of your chess pieces horizontally, vertically or diagonally, and to block your opponent. The player lining up five pieces first is the winner.
To move upwards, downwards, leftwards or rightwards, press
or . To place a piece, press the left soft key
, ,
. To retract your last move, press the left soft key the right soft key (Exit).
(Clear). To quit the game, press
4.6.2.1 Begin Game
Select this option to start a new game.
4.6.2.2 Continue Play
Select this option to continue the last game.
If the last game was over, No Record will be displayed after you select this option.
4.6.2.3 Game Mode
Select White Chess or Black Chess to determine who goes first with black pieces.
80
Menu -> WiFi
4.7 WiFi
Menu WiFi
From this submenu, you can perform the following WiFi settings.
Note: After completing WiFi settings, switch the phone off and then on, to apply the changed WiFi settings.
4.7.1 Net Search
Menu WiFi Net Search
This option enables you to search available APs (10 maximum) for the phone. APs can be defined and saved using the Net Search feature if APs have broadcast turned on and the phone is within their ranges.
After selecting this option, the phone will start to search for APs. Available
APs will be listed according to the signal strength. The strongest AP’s
SSID will be highlighted at the top of the list.
Those with the icon in front of the name are open APs; those with the
icon are APs protected with WEP keys; those with the icon are
APs protected with WPA-PSKs. You will need to supply protected APs’
WEP keys or WPA-PSKs to access them.
Press to highlight the desired SSID, and press the left soft key
(Save). Press to highlight the desired AP profile, and press the left soft key (Save) to save the SSID to the AP profile.
You can then follow the prompt to set the security mode and/or the encryption code (WEP key or WPA-PSK) and activate the AP profile. For detailed operations, refer to “AP Profile” on page 82.
Note: When the phone is connecting to an AP, you can press the right soft key (Search) to start the search for available APs.
If the desired AP has broadcast turned off, the AP can be entered directly through a series of keystrokes on your handset. (Refer to
81
Menu -> WiFi
“AP Profile” on page 82)
4.7.2 WiFi Config
Menu WiFi WiFi Config
From this option, you can perform the following WiFi configuration:
4.7.2.1 AP Profile
Menu WiFi WiFi Config AP Profile
This option enables you to set up to four AP (Access Point) profiles. Each time you switch on the phone, the phone will try to connect to one of these
APs according to their respective profile settings.
After you select this option, the AP profile list will be displayed. If the security mode of an AP profile is set to Open AP, the icon will be displayed in front of the AP profile. If the security mode is set to WPA-PSK, the icon will be displayed in front of the AP profile. If the security mode is set to WEP KEY, the icon will be displayed in front of the AP profile.
Press key
SSID
to highlight the desired AP profile, and then press the left soft
(Ok). The following options will be available:
This option enables you to save an AP’s SSID to the AP profile.
After accessing this option, enter the SSID (32 alphanumeric characters maximum), and then press the left soft key operation.
(Ok) to complete the
Security Mode
This option enables you to set the security mode for the AP profile.
82
Menu -> WiFi
After accessing this option, select Open AP, WEP KEY or WPA-PSK:
If WEP KEY is selected, the phone will then display the options of
WEP Key Info (refer to “WEP Key Info”)
If WPA-PSK is selected, the phone will then display the PSK-editing screen (refer to “WPA-PSK Info”)
WEP Key Info
If the AP profile’s security mode is set to WEP Key, select this option to set the WEP key. After accessing this option, observe the following operations:
1. Select Auth. Method, and then select the authentication method:
Open Key or Shared Key.
2. Select 64bit or 128bit according to the AP’s WEP key setting. Enter the WEP key that the AP used, and press the left soft key (Ok).
- If 64bit is selected, ensure that the WEP key consists of five ASCII characters or ten hexadecimal characters
- If 128bit is selected, ensure that the WEP key consists of 13 ASCII characters or 26 hexadecimal characters
3. Select WEP Key Index. Enter the WEP key index (1-4), and then press the left soft key (Ok).
Note: The WEP key setting may be different due to AP settings.
If an AP supports only a fixed hexadecimal WEP key, you should enter the same WEP key in the phone.
If an AP supports both ASCII and hexadecimal WEP keys, you can enter either the ACSII WEP key or the hexadecimal WEP key in the phone.
WPA-PSK Info
If the AP profile’s security mode is set to WPA-PSK, select this option to set the WPA-PSK key.
83
Menu -> WiFi
After accessing this option, enter the WPA-PSK key and press the left soft key (Ok) to complete the operation.
Ensure that the WPA-PSK key consists of 8-63 ASCII characters or 64 hexadecimal characters
Activate
Select this option to connect to the AP according to the AP profile setting.
If the connection fails, the phone will try to connect to other AP profiles’
APs. If the phone fails to connect to all these APs and the Auto Scan function is active, the phone will try to search and connect to another available open AP. (Refer to “Auto Scan” on page 84)
4.7.2.2 Auto Scan
Menu WiFi WiFi Config Auto Scan
If the Auto Scan function is active, when the phone is switched on and fails to connect to the APs specified in “AP Profile”, the phone will do a scan for available APs and try to connect to one open AP of these scanned APs.
After accessing this option, select Enable or Disable to activate or deactivate the Auto Scan function.
Note: If the phone fails to connect to all the specified and scanned
APs, the phone will periodically retry AP connections.
If the phone fails to register with the service network after the AP connection, the phone will prompt you to try another AP.
4.7.3 Network Parameter
Menu WiFi Network Parameter
This option enables you to set network parameters:
84
Menu -> WiFi
4.7.3.1 DHCP
Menu WiFi Network Parameter DHCP
If the DHCP function is active, the phone will obtain an IP address automatically from the DHCP server.
After accessing this option, select Disable or Enable to disable or enable
DHCP.
4.7.3.2 IP
Menu WiFi Network Parameter IP
This option enables you to perform IP settings.
Note: Only when DHCP is disabled, can the IP option be available.
Otherwise, when you select this option, Please Disable DHCP will be displayed.
IP Address
Select this option to set the phone’s IP address.
After accessing this option, key in the IP address, and press the left soft key (Ok) to complete the operation.
Subnet Mask
Select this option to set the subnet mask.
After accessing this option, key in the subnet mask, and press the left soft key (Ok) to complete the operation.
Gateway IP Address
Select this option to set the gateway IP address.
After accessing this option, key in the gateway IP address, and press the
85
Menu -> WiFi left soft key (Ok) to complete the operation.
4.7.3.3 DNS
Menu WiFi Network Parameter DNS
This option enables you to perform DNS settings.
Primary DNS Server IP Address
Select this option to set the IP address of the local primary DNS server.
After accessing this option, key in the IP address, and press the left soft key (Ok) to complete the operation.
Secondary DNS Server IP Address
Select this option to set the IP address of the local secondary DNS server.
After accessing this option, key in the IP address, and press the left soft key (Ok) to complete the operation.
Priority
Select this option to set the priority.
You can select DHCP First or Local First
4.7.3.4 Network Information
Menu WiFi Network Parameter Network Information
Select this option to view the phone’s network information. Press to browse through the phone’s IP Address, Subnet Mask, Gateway IP
Address, MAC Address, Connected SSID and DNS Address.
86
Menu -> WiFi
4.7.4 Signal Protocol
Menu WiFi Signal Protocol
From this option, you can set signal protocols:
4.7.4.1 SIP
Menu WiFi Signal Protocol SIP
This option enables you to configure up to three sets of SIP protocol settings.
After accessing the desired SIP protocol: I-SIP Protocol, II-SIP Protocol or III-SIP Protocol, you can select Enable to active the SIP protocol, or select Set to configure the following settings for the SIP protocol:
SIP Register Server Mode
Select this option to set the SIP register server mode.
After accessing this option, you can select IP or DNS.
SIP Register Server Domain Name
Select this option to set the SIP register server domain name.
After accessing this option, enter the domain name, and press the left soft key (Ok) to complete the operation.
SIP Register Server IP Address
Select this option to set the SIP register server IP address.
After accessing this option, key in the IP address, and press the left soft key (Ok) to complete the operation.
87
Menu -> WiFi
SIP Register Server Port
Select this option to set the SIP register server port.
After accessing this option, key in the port number, and press the left soft key (Ok) to complete the operation.
SIP Outbound Proxy
Select this option to set the SIP outbound proxy.
After accessing this option, you can select IP or DNS.
SIP Outbound Server Domain Name
Select this option to set the SIP outbound server domain name.
After accessing this option, enter the domain name, and press the left soft key (Ok) to complete the operation.
SIP Outbound Server IP Address
Select this option to set the SIP outbound server IP address.
After accessing this option, key in the IP address, and press the left soft key (Ok) to complete the operation.
SIP Outbound Server Port
Select this option to set the SIP outbound server port.
After accessing this option, key in the port number, and press the left soft key (Ok) to complete the operation.
SIP User Name
Select this option to set the SIP user name.
88
Menu -> WiFi
After accessing this option, enter the user name (1~32 alphanumeric characters), and press the left soft key operation.
(Ok) to complete the
SIP Authentication String
Select this option to set the SIP authentication string.
After accessing this option, enter the authentication string, and press the left soft key (Ok) to complete the operation.
SIP Password
Select this option to set the SIP password.
After accessing this option, follow the prompt to enter the security code and press the left soft key (Ok). Enter the SIP password (0~32 alphanumeric characters), and press the left soft key complete the operation.
(Ok) to
SIP Vendor Name
Select this option to set the SIP SIP vendor name. When the phone is connected to an AP and registered with the network, the preset vendor name will be displayed in standby mode.
After accessing this option, enter the SIP vendor name, and press the left soft key (Ok) to complete the operation.
4.7.4.2 RTP
Menu WiFi Signal Protocol RTP
Select this option to set the RTP protocol.
After you access this option, the RTP Port option will be displayed:
89
Menu -> WiFi
RTP Port
This option enables you to set the RTP port.
After accessing this option, key in the RTP port number (10000~20000), and press the left soft key (Ok) to complete the operation.
The port number should range from 10000 to 20000; otherwise Failed will be displayed
4.7.4.3 NAT
Menu WiFi Signal Protocol NAT
Select this option to set the NAT protocol.
After you access this option, the STUN Mode option will be displayed:
STUN Mode
This option enables you to set the STUN protocol:
Server Name
Select this option to set the STUN server name.
After accessing this option, key in the STUN server name, and press the left soft key (Ok) to complete the operation.
Server Port
Select this option to set the STUN server port.
After accessing this option, key in the STUN server port number, and press the left soft key (Ok) to complete the operation.
On/Off
Select Disable or Enable to deactivate or activate the STUN function.
90
Menu -> WiFi
4.7.4.4 Voice Mail
Menu WiFi Signal Protocol Voice Mail
This option enables you to perform voice mail settings.
After you access this option, the Voice Mail Access Number option will be displayed:
Voice Mail Access Number
Select this option to set the voice mail access number.
After accessing this option, key in the access number, and press the left soft key (Ok) to complete the operation.
Note: Pressing and holding in standby mode will call the voice mail access number.
91
Menu -> Network
4.8 Network
Menu Network
From this submenu, you can set the following network services:
4.8.1 Call Waiting
Menu Network Call Waiting
This option enables you to set the Call Waiting function.
4.8.1.1 Per Call Basis
Menu Network Call Waiting Per Call Basis
Select Enable or Disable to activate or deactivate the per call basis Call
Waiting function.
4.8.2 Call Transfer
Menu Network Call Transfer
If the call transfer function is active, you can transfer an ongoing call to another phone number. (Refer to “Transfer a Call” on page 22.)
After you access this option, the following will be available:
4.8.2.1 Disable
Menu Network Call Transfer Disable
Select this option to disable the call transfer function.
4.8.2.2 Blind
Menu Network Call Transfer Blind
If this option is selected, you can directly transfer an ongoing call to another phone number after the connection succeeds.
92
Menu -> Network
4.8.2.3 Consult
Menu Network Call Transfer Consult
If this option is selected, you need to announce the transfer after the transferred-to party answers your call. Then, press the left soft key
(Transfer) to transfer the intended call.
4.8.2.4 Blind & Consult
Menu Network Call Transfer Blind & Consult
Select this option to activate both Blind and Consult Call Transfer functions.
4.8.3 Three Way Call
Menu Network Three Way Call
If the Three Way Call function is active, you can make a conference call with two parties (refer to page 21 “Conference Call”).
After accessing this option, select Enable or Disable to activate or deactivate the Three Way Call function.
4.8.4 Register Interval Time
Menu Network Register Interval Time
This option enables you to set the register interval time.
After accessing this option, enter the interval time (0~86400 seconds), and then press the left soft key (Ok) to complete the operation.
4.8.5 Caller-ID Block
Menu Network Caller-ID Block
If this function is active, when you dial a call, your phone number will not be displayed on the called party’s phone.
93
Menu -> Network
After accessing this option, select On or Off to activate or deactivate this function.
4.8.6 Repeat Dial on Busy
Menu Network Repeat Dial on Busy
If this function is active, the phone will enable you to automatically redial the last busy number that you tried to dial.
After accessing this option, select On or Off to activate or deactivate this function.
4.8.7 Reject Anonymous Incoming Call
Menu Network Reject Anonymous Incoming Call
If this function is active, the phone will automatically reject anonymous incoming calls.
After accessing this option, elect On or Off to activate or deactivate this function.
4.8.8 No Disturb
Menu Network No Disturb
If this function is active, the phone will automatically reject all incoming calls.
After accessing this option, elect Enable or Disable to activate or deactivate this function.
4.8.9 Personal Information
Menu Network Personal Information
To set a caller ID name for the phone. After accessing this option, enter the caller ID and press the left soft key operation.
(Ok) to complete the
94
Menu -> Misc
4.9 Misc
Menu Misc
From this submenu, you can perform the following operations:
4.9.1 Vendor Information
Menu Misc Vendor Information
Select this option to view the vendor information. Press to browse through the information: Vendor Name, Enterprise Code, Model Name and Version.
4.9.2 PC Config
Menu Misc PC Config
This option enables you to download WiFi setting parameters from a PC to the phone.
When the operation is complete, restart the phone
4.9.3 Remote TFTP Update
Menu Misc Remote TFTP Update
This option enables you to perform remote TFTP update.
After you select this option, the phone will display a notice for the remote
TFTP update. Press left soft key
to browse through the information. Press the
(Update) to initiate the remote TFTP update process.
Note: The phone will spend a long time completing the remote
TFTP update. Please do not unplug the battery. When the update operation is complete, restart the phone.
95
Menu -> Misc
4.9.4 Remote TFTP Server
Menu Misc Remote TFTP Server
This option enables you to set the remote TFTP server.
After accessing this option, key in the domain name of the remote TFTP server, and press the left soft key (Ok) to complete the operation.
4.9.5 Local TFTP Update
Menu Misc Local TFTP Update
This option enables you to perform local TFTP update.
After accessing this option, follow the prompt to enter the security code and press the left soft key (Ok). The phone will display a notice for the local TFTP update. Press
Press the left soft key process.
to browse through the information.
(Update) to initiate the local TFTP update
Note: The phone will spend a long time completing the local TFTP update. Please do not unplug the battery. When the update operation is complete, restart the phone.
4.9.6 Local Log
Menu Misc Local Log
Select this option to view the phone’s status information (for example, network connection, SIP messages). Press the left soft key (Next) to browse through items. This information will be useful when troubleshooting a problem.
96
Menu -> Misc
4.9.7 Web Authentication
Menu Misc Web Authentication
Set this option when you use the phone in an area that requires web authentication.
After you access this option, the following will be available:
4.9.7.1 Set Address
Select this option to set the effective URL for script download
After accessing this option, key in the URL, and press the left soft key
(Ok) to complete the operation
4.9.7.2 Download Script
Select this option to initiate script download.
Script files may be different due to authentication methods. You may need to download script files each time you perform web authentication for a different area
For detailed information, contact the area’s network administrator
4.9.7.3 Log In
Select this option to log in and follow the prompt to enter the corresponding user name and password.
97
Input Method
5. INPUT METHOD
This phone supports five input methods, including English, Letter, PinYin,
Stroke and Digit in order to provide easy input for letters and digits in text editing mode.
5.1 Switch Input Method
In text-editing mode, press to switch between the input methods.
The current input method indicator will be displayed at the upper right side of the screen and include:
Indicator Input Method
English
Letter
PinYin
Stroke
Digit
5.2 English
The phone supports intelligent English input and word association, speeding up the input process.
Switch the input method to English; right corner of the screen.
will be displayed at the upper
1. To enter letters, press ~ one time for the letters labeled on the respective key; a word matching the input letters will be displayed automatically.
98
Input Method
- When you enter the first letter of any English word, “*” will be displayed (except and ). As you input letters, the phone will automatically associate the matched English words
- If the letter input does not correspond with any English word in the phone’s dictionary, this key press will have no response
- Press the right soft key from right to left
(Clear) repeatedly to delete letters
2. Select a word and change upper/lower case: If the word displayed is not desired, press to scroll through other word alternatives. Press
to switch between upper and lower cases; press once to capitalize the initial letter; press twice to capitalize all letters; press three times to return letters to lower case.
3. Enter the selected word: Press the left soft key or confirm the selected word and to remove the underline; or press to confirm the word and to add a space.
to
- When no word is underlined, press to enter a space; press
to switch input methods; press the right soft key
to move the cursor; press
(Clear) to delete the character to the left of the cursor; press and hold the right soft key all characters
(Clear) to delete
5.3 Letter
Switch to Letter input method; will be displayed at the upper right corner of the screen.
1. Press ~ to enter the corresponding letter labeled on the respective key. To input a letter, press the corresponding key repeatedly until the letter appears.
99
Input Method
For example: if you press appear in turn:
repeatedly, the following letters
- The letter just entered will be underlined. When the letter is underlined, press to switch between upper and lower cases; press the right soft key (Clear) to delete the letter
2. After you have entered the intended letter, press any other key on the keypad to input the next letter. If the next letter and current letter share the same key, press the left soft key or to remove the underline, and then enter the next letter; or simply wait for one second to input again. Press a space.
to confirm the current letter input and enter
3. When no letter is underlined, press to enter a space; press to move the cursor; press the right soft key (Clear) to delete the character to the left of the cursor; press and hold the right soft key
(Clear) to delete all characters; press to switch input methods.
5.4 PinYin and Stroke
These two input methods are only used for inputting Chinese characters.
5.5 Digit
Switch to digit input method; will be displayed in the upper right corner of the screen.
To enter digits, press the corresponding number keys
to switch input methods.
~ . Press
100
Input Method
5.6 Symbols
In text-editing mode, if the current input method is not Digit, you can enter symbols by observing the following steps:
1. When the word selection column is empty or when no letter is underlined, press to display the symbol list.
2. Press to display the intended symbol. Press the corresponding number key to enter the desired symbol.
Note: If the current input method is neither Stroke nor Digit, when the word selection column is empty, you can also press repeatedly to enter the desired symbol.
101
Troubleshooting
6. TROUBLESHOOTING
When using this phone, if you run into malfunctions, please refer to the following troubleshooting techniques before requesting help:
Symptom
The phone cannot be switched on
Cannot make calls
No ring
Strong interference noise during call;
Diagnosis Solution
Have you pressed and held it for more than
2 seconds?
Is the battery low?
Is the phone connected to an AP and registered with the service network?
Press and hold for more than 2 seconds.
Charge the battery.
Ensure the phone’s
WiFi settings are correct.
Is the phone outside of the AP’s range? Is there sufficient signal strength?
Is the phone number correct?
Move closer to the
AP for better signal strength.
Enter the correct number to make the call.
Is the ring mode of the current profile set to
Vibration or Mute?
Select different ring mode or different profile.
Have you pressed and held mode, displaying
(green)?
in standby
In standby mode, press and hold again.
Is there an obstacle nearby that is preventing signals from passing?
Move to another area.
102
Troubleshooting
Symptom or call interrupted
The battery cannot be charged (The battery indicator bar does not scroll)
How to know the
F3000 phone’s
IP address and
MAC Address?
Net Search didn't find my AP
Diagnosis Solution
Is there data download via the AP, which affects your phone’s signal quality?
Connect to another
AP or stop the data download.
Is the charger properly connected to the phone?
Connect the charger and phone correctly.
Is the charger connected to a 100-240V AC wall outlet?
Have you accessed the
Network Information option?
Connect the charger to a 100-240V AC wall outlet correctly.
Information” on page
86.
Is SSID broadcasting disabled on your AP?
Enable your AP’s
SSID broadcasting.
Is the phone within range of your AP?
Move to your AP’s range.
If the malfunction symptoms are not listed in the above table, or the corresponding solution is invalid, please contact your local service provider.
For Technical Support and Assistance please visit the website at: http://www.utstar.com
103
advertisement
Related manuals
advertisement
Table of contents
- 2 Table of Contents
- 5 SAFETY PRECAUTIONS
- 5 CE Declaration of Conformity
- 6 FCC RF Exposure Compliance
- 7 Handling the Phone, Battery and Charger
- 8 Handling the Phone
- 10 Handling the Battery
- 11 Handling the Charger
- 12 GETTING STARTED
- 12 Package Contents
- 13 Phone Specifications
- 14 Handset Description
- 16 Display Indicators
- 17 Charge the Battery
- 18 Replace the Battery
- 19 Conventions Used in this Manual
- 20 Access Menu/List Options
- 21 BASIC OPERATIONS
- 21 Switch the Phone On/Off
- 21 Make a Call
- 22 Use Speed Dial
- 22 Answer a Call
- 23 Reject a Call
- 23 In Call Operations
- 23 Hold a Call
- 24 Call Waiting
- 24 Make a New Call
- 25 Conference Call
- 26 Transfer a Call
- 26 Mute the Microphone Volume
- 27 Access the Phonebook
- 27 Adjust the Listening Volume
- 28 Store a Phone Number
- 28 Call Log Shortcut
- 29 Custom Functions Shortcut
- 29 Profiles Shortcut
- 29 Vibration Shortcut
- 30 PHONEBOOK (NAMES)
- 30 Search
- 31 Edit
- 32 Del Contact
- 32 Group Members
- 32 Call
- 32 Send Message
- 32 Send Email
- 32 Add Entry
- 34 Delete
- 34 One by One
- 34 All
- 35 Group Info
- 35 Ring Tone
- 35 Browse
- 36 Speed Dial
- 37 Memory
- 38 MENU
- 38 Messages
- 38 Text Message
- 38 Edit Message
- 40 Inbox
- 42 Outbox
- 43 Draft
- 44 Config
- 45 Status
- 45 Email
- 45 Edit Email
- 47 Inbox
- 50 Outbox
- 51 Receive New
- 51 Draft
- 52 Config
- 54 Status
- 55 Call Log
- 55 Missed Log
- 56 View
- 56 Pick Up Number
- 57 Send Message
- 58 Delete
- 58 Delete All
- 58 Received Log
- 59 View
- 59 Pick Up Number
- 60 Send Message
- 61 Delete
- 61 Delete All
- 61 Dialed log
- 62 View
- 62 Pick Up Number
- 63 Send Message
- 63 Delete
- 64 Delete All
- 64 Duration
- 65 Profiles
- 65 Standard
- 65 Enable
- 65 Set
- 69 Meeting
- 69 Outdoor
- 69 User Define
- 70 Settings
- 70 Date/Time
- 70 Date/Time
- 70 Time Format
- 71 Date Format
- 71 Display
- 71 Scheme
- 72 Greetings
- 72 Backlight
- 72 Contrast
- 72 Set Handset
- 73 Answer Mode
- 73 Language
- 73 Earphone Auto Answer
- 74 Set Security
- 74 PowerOn Code
- 74 Change Code
- 75 Reset All
- 77 Tools
- 77 Alarm
- 77 On/Off
- 77 Set Time
- 78 Snooze
- 78 Set Cycle
- 79 Calendar
- 79 Choose Date
- 79 Edit Memo
- 80 View Memo
- 80 Delete Memo
- 81 Calculator
- 82 Time Zone
- 82 Set to Local Time
- 82 Enable/Disable DST
- 83 Games
- 83 Sand Volleyball
- 83 Begin Game
- 83 Game Level
- 84 Game Rule
- 84 Gobang
- 84 Begin Game
- 84 Continue Play
- 84 Game Mode
- 85 WiFi
- 85 Net Search
- 86 WiFi Config
- 86 AP Profile
- 88 Auto Scan
- 88 Network Parameter
- 89 DHCP
- 89 IP
- 90 DNS
- 90 Network Information
- 91 Signal Protocol
- 91 SIP
- 93 RTP
- 94 NAT
- 95 Voice Mail
- 96 Network
- 96 Call Waiting
- 96 Per Call Basis
- 96 Call Transfer
- 96 Disable
- 96 Blind
- 97 Consult
- 97 Blind & Consult
- 97 Three Way Call
- 97 Register Interval Time
- 97 Caller-ID Block
- 98 Repeat Dial on Busy
- 98 Reject Anonymous Incoming Call
- 98 No Disturb
- 98 Personal Information
- 99 Misc
- 99 Vendor Information
- 99 PC Config
- 99 Remote TFTP Update
- 100 Remote TFTP Server
- 100 Local TFTP Update
- 100 Local Log
- 101 Web Authentication
- 101 Set Address
- 101 Download Script
- 101 Log In
- 102 INPUT METHOD
- 102 Switch Input Method
- 102 English
- 103 Letter
- 104 PinYin and Stroke
- 104 Digit
- 105 Symbols
- 106 TROUBLESHOOTING