Eiki LC-XB29N Owner`s manual

MULTIMEDIA PROJECTOR

MODEL

LC-XB29N

Network Supported

❏ Wireless LAN (optionally available)

IEEE802.11b/g

❏ Wired LAN

100-Base-TX/10-Base-T

Memory Viewer

❏ USB Memory Viewer (optionally available)

Compatible with a dedicated USB memory

✽Refer to the owner's manuals below for details about network and memory viewer function.

■ Network Set-up and Operation

■ Owner's Manual USB Memory

This manual is provided with optionally supplied USB memory (Model: WL-10).

OWNER’S MANUAL

Features and Design

This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use.

This projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display

(LCD) technology.

◆

Compact Design

This projector is designed compact in size and weight.

It is easy to carry and installed anywhere you wish to use.

◆

Multilanguage Menu Display

Operation menu is available in 16 languages; English,

German, French, Italian, Spanish, Portuguese, Dutch,

Swedish, Finnish, Polish, Hungarian, Romanian,

Russian, Chinese, Korean, and Japanese (p.45).

◆

Compatibility

The projector widely accepts various video and computer input signals including; Computers, 6 Color systems (PAL, SECAM, NTSC, NTSC4.43, PAL-M,

PAL-N), Component video, S-video and RGB scart.

◆

Security Function

The Security function helps you to ensure security of the projector. With the Key lock function, you can lock the operation on the top control or remote control

(p.52). PIN code lock functions prevents unauthorized use of the projector (pp.21, 52–53).

◆

Simple Computer System Setting

The projector has the Multi-scan system to conform to almost all computer output signals quickly (p.30). Up to

UXGA resolution can be accepted.

◆

Helpful Maintenance Functions

Lamp and filter maintenance functions provide for better and proper maintenance of the projector.

◆

Useful Functions for Presentations

- The digital zoom function allows you to focus on the crucial information during a presentation (p.37).

- Blackboards* can be used as a projection screen.

*The board color is limited to Green (pp.34, 41).

◆

Power Management

The Power management function reduces power consumption and maintains the lamp life (p.50).

◆

LAN Network Function

This projector is loaded with Wired and Wireless LAN* network function. You can project an image on a computer via the network. You can also operate and manage the projector via the network. For details, refer to the owner's manual "Network Set-up and

Operation" supplied with this projector.

* Dedicated USB Wireless LAN adapter for Wireless operation is optionally available (Model : WL-30)

◆

Lamp Control

Brightness of the projection lamp can be selected

(p.51).

◆

Memory Viewer Function (Optional Function)

Insert the dedicated USB memory (optionally supplied:

Model WL-10) into the projector to project images or presentation data stored within. You do not have to carry computers or other equipment for a presentation

* For details, refer to the owner’s manual provided with optionally supplied USB memory.

◆

Logo Function

The Logo function allows you to customize the screen logo (pp.47-48). You can capture an image for the screen logo and use it for the starting-up display or between presentations.

2

✔

Notes:

•The On-Screen Menu and figures in this manual may differ slightly from the product.

•The contents of this manual are subject to change without notice.

Table of Contents

Features and Design . . . . . . . . . . . . . . . . . . .2

Table of Contents . . . . . . . . . . . . . . . . . . . . . .3

To the Owner . . . . . . . . . . . . . . . . . . . . . . . . .4

Safety Instructions . . . . . . . . . . . . . . . . . . . .5

Air Circulation 6

Moving the Projector

Installing the Projector in Proper Directions

6

7

Compliance . . . . . . . . . . . . . . . . . . . . . . . . . .8

Part Names and Functions . . . . . . . . . . . . . .9

Front

Back

9

9

Bottom

Rear Terminal / Side Terminal

Top Control

Remote Control

Laser Pointer Function

Pointer Function

Wireless Mouse Operation

Remote Control Code

Remote Control Battery Installation

Remote Control Operating Range

Adjustable Feet

13

13

14

14

9

10

11

12

15

15

15

Installation . . . . . . . . . . . . . . . . . . . . . . . . . .16

Positioning the Projector

Connecting to a Computer

16

17

Connecting to Video Equipment 18

Connecting to Component Video Equipment 19

Connecting the AC Power Cord 20

Basic Operation . . . . . . . . . . . . . . . . . . . . . .21

Turning On the Projector 21

Turning Off the Projector

How to Operate the On-Screen Menu

Menu Bar

Sound Adjustment

Zoom and Focus Adjustment

Auto Setup Function

Keystone Correction

Remote Control Operation

25

26

26

26

22

23

24

25

Computer Input . . . . . . . . . . . . . . . . . . . . .28

Input Source Selection

(RGB: Computer 1 (Analog)/Computer 2 )


28

(RGB(PC digital), RGB(AV HDCP))

Computer System Selection

Auto PC Adjustment

Manual PC Adjustment

Image Mode Selection

Image Adjustment

Screen Size Adjustment

34

35

36

29

30

31

32

Video Input . . . . . . . . . . . . . . . . . . . . . . . . . .38

Input Source Selection (Video, S-video) 38


(Component, RGB Scart 21-pin)

Video System Selection

Image Mode Selection

Image Adjustment

Screen Size Adjustment

39

40

41

42

44

Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45

Setting 45

Maintenance and Cleaning . . . . . . . . . . . . .56

Warning Indicator

Cleaning the Filter

56

57

Resetting the Filter Counter

Lamp Replacement

Resetting the Lamp Counter

Attaching the Lens Cover

Cleaning the Projection Lens

Cleaning the Projector Cabinet

57

58

59

60

60

60

Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . .61

Indicators and Projector Condition

Troubleshooting

Menu Tree

61

62

64

Compatible Computer Specifications

Technical Specifications

Optional Parts

PJ Link Notice

Configurations of Terminals

PIN Code Number Memo

66

68

69

70

71

72

Trademarks

Each name of corporations or products in this book is either a registered trademark or a trademark of its respective corporation.

3

To the Owner

Before installing and operating this projector, read this manual thoroughly.

This projector provides many convenient features and functions. Operating the projector properly enables you to manage those features and maintains it in good condition for many years to come.

Improper operation may result in not only shortening the product-life, but also malfunctions, fire hazard, or other accidents.

If your projector seems to operate improperly, read this manual again, check operations and cable connections and try the solutions in the “Troubleshooting” section in the back of this booklet. If the problem still persists, contact the dealer where you purchased the projector or the service center.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR

BACK). NO USER-SERVICEABLE PARTS

INSIDE EXCEPT LAMP REPLACEMENT.

REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

THIS SYMBOL INDICATES THAT DANGEROUS

VOLTAGE CONSTITUTING A RISK OF ELECTRIC

SHOCK IS PRESENT WITHIN THIS UNIT.

THIS SYMBOL INDICATES THAT THERE ARE

IMPORTANT OPERATING AND MAINTENANCE

INSTRUCTIONS IN THE OWNER'S MANUAL WITH

THIS UNIT.

Safety Precaution

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, DO NOT EXPOSE THIS APPLIANCE TO

RAIN OR MOISTURE.

– This projector produces intense light from the projection lens. Do not stare directly into the lens, otherwise eye damage could result. Be especially careful that children do not stare directly into the beam.

– Install the projector in a proper position. Otherwise it may result in fire hazard.

– Allowing the proper amount of space on the top, sides, and rear of the projector cabinet is critical for proper air circulation and cooling of the unit. The dimension shown here indicate the minimum space required. If the projector is to be built into a compartment or similarly enclosed, these minimum distances must be maintained.

SIDE and TOP REAR

0.7' (20 cm)

4

NOTE: This symbol and recycle system are applied only to EU countries and not applied to the countries in the other area of the world.

Your EIKI product is designed and manufactured with high quality materials and components which can be recycled and reused.

This symbol means that electrical and electronic equipment, at their end-oflife, should be disposed of separately from your household waste.

Please dispose of this equipment at your local community waste collection/recycling centre.

In the European Union there are separate collection systems for used electrical and electronic products.

Please help us to conserve the environment we live in!

READ AND KEEP THIS OWNER'S MANUAL FOR

LATER USE.

1.5' (50 cm) 3' (1 m) 1.5' (50 cm)

– Do not cover the ventilation slot on the projector. Heat build-up can reduce the service life of your projector, and can also be dangerous.

– If the projector is unused for an extended time, unplug the projector from the power outlet.

CAUTION ON HANGING FROM THE CEILING

When hanging the projector from the ceiling, clean air intake vents, filters, or top of the projector periodically with a vacuum cleaner. If you leave the projector unclean for a long time, the cooling fans can be clogged with dust, and it may cause a breakdown or a disaster.

DO NOT SET THE PROJECTOR IN GREASY, WET, OR

SMOKY CONDITIONS SUCH AS IN A KITCHEN TO PREVENT

A BREAKDOWN OR A DISASTER. IF THE PROJECTOR

COMES IN CONTACT WITH OIL OR CHEMICALS, IT MAY

BECOME DETERIORATED.

CAUTION

Not for use in a computer room as defined in the

Standard for the Protection of Electronic Computer/Data

Processing Equipment, ANSI/NFPA 75.

Ne peut être utilisé dans une salle d’ordinateurs telle que définie dans la norme ANSI/NFPA 75 Standard for

Protection of Electronic Computer/Data Processing

Equipment

Safety Instructions

All the safety and operating instructions should be read before the product is operated.

Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners.

Use a damp cloth for cleaning.

Follow all warnings and instructions marked on the projector.

For added protection to the projector during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet. This will prevent damage due to lightning and power line surges.

Do not expose this unit to rain or use near water... for example, in a wet basement, near a swimming pool, etc...

Do not use attachments not recommended by the manufacturer as they may cause hazards.

Do not place this projector on an unstable cart, stand, or table. The projector may fall, causing serious injury to a child or adult, and serious damage to the projector. Use only with a cart or stand recommended by the manufacturer, or sold with the projector. Wall or shelf mounting should follow the manufacturer’s instructions, and should use a mounting kit approved by the manufacturers.

An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.

Slots and openings in the back and bottom of the cabinet are provided for ventilation, to ensure reliable operation of the equipment and to protect it from overheating.

The openings should never be covered with cloth or other materials, and the bottom opening should not be blocked by placing the projector on a bed, sofa, rug, or other similar surface. This projector should never be placed near or over a radiator or heat register.

This projector should not be placed in a built-in installation such as a book case unless proper ventilation is provided.

Never push objects of any kind into this projector through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the projector.

Do not install the projector near the ventilation duct of airconditioning equipment.

This projector should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied, consult your authorized dealer or local power company.

Do not overload wall outlets and extension cords as this can result in fire or electric shock. Do not allow anything to rest on the power cord. Do not locate this projector where the cord may be damaged by persons walking on it.

Do not attempt to service this projector yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

Unplug this projector from wall outlet and refer servicing to qualified service personnel under the following conditions: a. When the power cord or plug is damaged or frayed.

b. If liquid has been spilled into the projector.

c. If the projector has been exposed to rain or water.

d. If the projector does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the projector to normal operation.

e. If the projector has been dropped or the cabinet has been damaged.

f. When the projector exhibits a distinct change in performance-this indicates a need for service.

When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or injury to persons.

Upon completion of any service or repairs to this projector, ask the service technician to perform routine safety checks to determine that the projector is in safe operating condition.

NL

Voor de klanten in Nederland

Bij dit produkt zijn batterijen geleverd.

Wanneer deze leeg zijn, moet u ze niet weggooien maar inleveren als KCA.

5

6


Air Circulation

Openings in the cabinet are provided for ventilation. To ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered.

CAUTION

Hot air is exhausted from the exhaust vent. When using or installing the projector, the following precautions should be taken.

– Do not put any flammable object or spray can near the projector, hot air is exhausted from the air vents.

– Keep the exhaust vent at least 3’ (1 m) away from any objects.

– Do not touch a peripheral part of the exhaust vent, especially screws and metallic parts. These areas will become hot while the projector is being used.

– Do not put anything on the cabinet. Objects put on the cabinet will not only get damaged but also may cause fire hazard by heat.

Cooling fans are provided to cool down the projector.

The fans’ running speed is changed according to the temperature inside the projector.

Moving the Projector

When moving the projector, replace the lens cover and retract adjustable feet to prevent damage to the lens and cabinet.

When the projector is not in use for an extended period, put it into the supplied carrying case with the lens side up.

CAUTION

The carrying case (supplied) is intended for protection against dust and scratches on surface of the cabinet, and it is not designed to protect an appliance from external forces. Do not transport the projector by courier or any other transport service with this case, otherwise the projector can be damaged. When handling the projector, do not drop, bump, subject it to strong forces, or put other things on the cabinet.

CAUTION IN CARRYING OR TRANSPORTING

THE PROJECTOR

– Do not drop or bump the projector, otherwise damages or malfunctions may result.

–When carrying the projector, use a suitable carrying case.

–Do not transport the projector by courier or any other transport service in an unsuitable transport case. This may cause damage to the projector. For information about transporting the projector by courier or any other transport service, consult your dealer.

–Do not put the projector in a case before the projector is cooled enough.

Exhaust Vent

Exhaust Vent

(Hot air exhaust)

Air Intake

Vent

Air Intake

Vent

20˚

20˚


Installing the Projector in Proper Directions

Use the projector properly in specified positions. Improper positioning may reduce the lamp life and result in severe accident or fire hazard.

Positioning Precautions

Avoid positioning the projector as described below when installing.

Do not tilt the projector more than 20 degrees from side to side.

Do not point the projector up to project an image.

Do not point the projector down to project an image.

Do not put the projector on either side to project an image.

7

8

Compliance

Federal Communications Commission Notice

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and receiver.

– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

– Consult the dealer or an experienced radio/TV technician for help.

Use of shielded cable is required to comply with class B limits in Subpart B of Part 15 of FCC Rules.

Do not make any changes or modifications to the equipment unless otherwise specified in the instructions. If such changes or modifications should be made, you could be required to stop operation of the equipment.

Model Number

Trade Name

Responsible party

Address

Telephone No.

: LC-XB29N

: EIKI

: EIKI International, Inc.

: 30251 Esperanza Rancho Santa Margarita CA 92688-2132

: 800-242-3454 (949-457-0200)

AC Power Cord Requirement

The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it.

AC Power Cord for the United States and Canada:

AC Power Cord used in the United States and Canada is listed by the Underwriters Laboratories

(UL) and certified by the Canadian Standard Association (CSA).

AC Power Cord has a grounding-type AC line plug. This is a safety feature to be sure that the plug will fit into the power outlet. Do not try to defeat this safety feature. Should you be unable to insert the plug into the outlet, contact your electrician.

GROUND

THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND EASILY ACCESSIBLE.

Part Names and Functions

Front

q w e r t y u !7

Back

!7

i o !0

!1

!2

Bottom

!3

!4

!5

✽ q USB Terminal w LAN Connection Terminal e Zoom Lever r Projection Lens t Focus Ring y Lens Cover

(See page 60 for attaching.) u Infrared Remote Receiver i Top Controls and Indicators o Speaker

!0 Air Intake Vent

!1 Power Cord Connector

!2 Terminals and Connectors

!3 Lamp Cover

!4 Air Intake Vents (back and bottom)

!5 Filters

!6 Adjustable Feet

!7 Exhaust Vent

CAUTION

Hot air is exhausted from the exhaust vents. Do not put heat-sensitive objects near this side.

✔

Note: q USB Terminal and w LAN Connection

Terminal are for the Network function. Refer to the owner’s manual “Network Set-up and

Operation” and owner's manual of Memory viewer (optionally available).

✽ Kensington Security Slot

This slot is for a Kensington lock used to deter theft of the projector.

* Kensington is a registered trademark of ACCO Brands

Corporation.

!6

9


Rear Terminal / Side Terminal

q w e r t y u !0

!1

USB SERVICE PORT COMPUTER IN 1

DVI-I

(VARIABLE)

R AUDIO OUT

COMPUTER IN 2

/ COMPONENT IN

MONITOR OUT

VIDEO IN

S-VIDEO IN

L

(MONO)

COMPUTER /

COMPONENT

AUDIO IN

Rear Terminal Side Terminal o i q USB (Series B)

In order to operate the computer with the remote control and use the PAGE ed buttons on the remote control during a presentation, connect the

USB port of the computer to the USB terminal with a USB cable. (pp.14, 17) w SERVICE PORT

This jack is used to service the projector. e COMPUTER IN 1 / DVI-I

Connect computer output (Digital / Analog DVI-I type) to this terminal. (p.17) y u

AUDIO IN

Connect the audio output from video equipment connected to t or o to this jack. (When the audio output is monaural, connect it to L (MONO) jack.)

(p.18)

AUDIO OUT(VARIABLE)

Connect an external audio amplifier to this jack.

(pp.17- 19)

This terminal outputs sound from AUDIO IN terminal (y or i).

r COMPUTER IN 2 /COMPONENT IN /

MONITOR OUT

This terminal is switchable and can be used for input from a computer, video equipment

(Component or RGB Scart) or output to the other monitor. Optional cables are required when using this terminal as component input or RGB Scart 21-

Pin Video input. (p.69)

Set the terminal up as either Computer input or

Monitor output properly. (Used for Monitor out, this terminal outputs only incoming RGB analog signals from COMPUTER IN 1 / DVI-I terminal.)

(pp.17, 19, 49) t S-VIDEO IN

Connect the S-VIDEO output from video equipment to this jack. (p.18) i COMPUTER/ COMPONENT AUDIO IN

Connect the audio output (stereo) from a computer o or video equipment connected to e or r to this jack. (pp.17, 19)

VIDEO IN

Connect the composite video output from video equipment to VIDEO jack. (p.18)

!0 USB (Series A)

Connect supplied USB Wireless LAN Adapter or optionally supplied USB memory for Memory viewer operation. (Refer to the owner's manual supplied with optionally available USB memory.)

!1 LAN connection

Connect the LAN cable. (Refer to the Owner's manual “Network Set-up and Operation”.)

10


Top Control

q w e r t y u i

ON

-

OFF

POWER

MENU

WARNING LAMP REPLACE

INPUT

AUT

O SET

UP

SELECT

+ VOLUME

- VOLUME o q SELECT button

– Execute the selected item. (p.23)

– Expand or compress the image in Digital zoom mode. (p.37) w POWER ON–OFF button

Turn the projector on or off. (pp.21, 22) e MENU button

Open or close the On-Screen Menu. (p.23) y WARNING indicator

Emit a red light when the projector detects abnormal condition. This also blinks red when the internal temperature of the projector exceeds the operating range. (pp.56, 61) u LAMP REPLACE indicator

Turn yellow when the life of the projection lamp draws to an end. (pp.58, 61) r POWER indicator

Emit a red light until the projector gets ready to be turned on. It turns red when the projector is in the stand-by mode. It remains green while the projector is under operation. (pp.21, 22, 61) t INPUT button

Select input source. (pp.28, 29, 38, 39) i AUTO SETUP button

Correct vertical keystone distortion and adjust computer display parameters including Fine sync.,

Total dots and Picture position. (pp.26, 45) o POINT (ed7 8 ) buttons

– Select an item or adjust the value in the On-

Screen Menu. (p.23)

– Pan the image in Digital zoom + mode. (p.37)

– Adjust the volume level. (Point 7 8 buttons)

(p.25)

11


Remote Control

o

!0

!1

!2

!3

!4

q r t y u i e

!5

w

@4

@3

@2

@1

To ensure safe operation, please observe the following precautions:

– Do not bend, drop, or expose the remote control to moisture or heat.

– For cleaning, use a soft dry cloth. Do not apply benzene, thinner, splay, or any chemical material.

@0

!9

!8

!7

!6

q

L-CLICK button

Act as the left mouse button for wireless mouse operation. (p.14) w

POWER ON-OFF button

Turn the projector on or off. (pp.21, 22) e

SIGNAL EMISSION indicator

Lights red while the laser beam is being emitted from the laser light window or a signal is being sent from the remote control to the projector.

r

VIDEO button

Select the VIDEO input source. (p.38) t

COMPUTER button

Select the COMPUTER input source. (pp.28, 29, 39) y

AUTO PC button

Automatically adjust the computer image to its optimum setting. (pp.27, 31, 45) u

KEYSTONE button

Correct keystone distortion. (pp.26, 46) i

Point ed 7 8 ( VOLUME + / – ) buttons

– Select an item or adjust the value in the On-Screen Menu. (p.23)

– Pan the image in the Digital zoom + mode. (p.37)

– Adjust the volume level. (Point 7 8 buttons) (p.25) o

MENU button

Open or close the On-Screen Menu. (p.23)

!0

FREEZE button

Freeze the picture on the screen. (p.27)

!1

LASER button

– Operate the Laser pointer function. Laser beam is emitted while pressing this button within 1 minute. When using this laser pointer for more than 1 minute, release the LASER button and press it again. (p.13)

– Display the Pointer on the screen. (p.13)

!2

PAGE ed buttons

Scroll back and forth the pages on the screen when giving a presentation. To use these buttons, connect the projector and your computer with a USB cable. (pp.10, 17)

!3

LAMP CONTROL button

Select a lamp mode. (pp.27, 51)

!4

D.ZOOM ed buttons

Zoom in and out the images. (pp.27, 37)

!5

RESET/ON/ALL-OFF switch

When using the remote control, set this switch to “ON.” Set it to “ALL OFF” for power saving when it is not used. Slide this switch to "RESET" to initialize the remote control code or switch Spotlight and Pointer to the Laser pointer function.

(pp.13, 14)

!6

IMAGE button

Select the image mode. (pp.27, 34, 41)

!7

MUTE button

Mute the sound. (p.25)

!8

P-TIMER button

Operate the P-timer function. (p.27)

!9

NO SHOW button

Temporarily turn off the image on the screen. (p.27)

@0

R-CLICK button

Act as the right mouse button for wireless mouse operation. (p.14)

@1

SELECT button

– Execute the selected item. (p.23)

– Expand or compress the image in Digital zoom mode. (p.37)

@2

PRESENTATION POINTER button

Move a pointer of the projector or a pointer for wireless mouse operation. (pp.13.14)

@3

AUTO SET button

Correct vertical keystone distortion and adjust the PC display parameters. (pp.26, 45)

@4

NETWORK button

Select the Network input or Memory viewer input. See owner's manual “Network

Set-up and Operation” and owner's manual of Memory viewer (optionally available).

12


Laser Pointer Function

This remote control emits a laser beam from the laser light window. Press the LASER button to activate the laser pointer. The signal emission indicator lights red and the red laser beam is emitted. If the LASER button is pressed for more than one minute or if it is released, the laser light goes off.

The laser emitted is a Class II laser. Do not look into the laser light window or point the laser beam at yourself or other people. The following is the caution label for the laser beam.

CAUTION: Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Never look directly into the laser light window while a laser is emitted, otherwise eye damage may result.

The caution label is put on the remote control.

Signal Emission Indicator

Laser Light Window

Pointer Function

You can move the Spotlight or Pointer of the projector with the remote control to emphasize a part of the projected image.

1

2

3

Press and hold the MENU and NO SHOW buttons for more than 10 seconds to activate the Pointer function.

(The Laser pointer has switched to the Pointer function.)

Press the LASER button on the remote control pointing toward the projector. The Spotlight or Pointer is displayed on the screen with the LASER button lighting green. Then move the Spotlight or Pointer with the

PRESENTATION POINTER button. If the LASER button does not light green and continues to emit a laser beam, try the abovementioned procedure until the

LASER button lights green.

To clear the Spotlight or Pointer out the screen, press the LASER button pointing toward the projector and see if the LASER button lighting is turned off.

To switch to the Laser pointer again, press and hold the

NO SHOW and MENU buttons for more than 10 seconds or slide the RESET/ON/ALL-OFF switch to

“RESET” and then to “ON”.

When you reset the Pointer function, the remote control code will be reset, as well.

Spotlight Pointer


MENU button

NO SHOW button

Press and hold the MENU and NO SHOW buttons for more than 10 seconds.


LASER button

After the Laser pointer has switched to the Pointer, use the LASER button as the

Pointer function ON-OFF switch. Press the LASER button pointing toward the projector and see if it lights green.

✔

Note:

•You can choose the size of Spotlight (Large/Middle/Small) and the pattern of Pointer (Arrow/Finger/Dot) in the Setting Menu. See

“Pointer” on page 51.

13


Wireless Mouse Operation

The remote control can be used as a wireless mouse for your computer. Before operating the wireless mouse, connect your computer and the projector with the supplied USB cable. See “Connecting to a Computer” on page 17. When the Pointer function is used, the wireless mouse is not available.

L-CLICK button

Acts as left (click) mouse button while the projector and a computer are connected with a USB cable.


Move the pointer on the screen with this button.

R-CLICK button

Acts as right (click) mouse button while the projector and a computer are connected with a

USB cable.

Remote Control Code

The eight different remote control codes (Code 1–Code 8) are assigned to this projector. Switching the remote control codes prevents interference from other remote controls when several projectors or video equipment next to each other are operated at the same time. Change the remote control code for the projector first before changing that for the remote control. See “Remote control” in the Setting Menu on page 51.

1

2

Press and hold the MENU and IMAGE buttons for more than five seconds to switch between the codes.

The code switches sequentially for one pressing the

IMAGE button. See the list below.

To initialize the remote control code, slide the RESET/

ON/ALL-OFF switch to “RESET,” and then to “ON.”

The initial code is set to Code 1.

While pressing the MENU button, press the IMAGE button number of times corresponding to the remote control code.

Remote Control Code

Code 1

Code 2

Code 3

Code 4

Code 5

Code 6

Code 7

Code 8

Number of Times

Pressing IMAGE

Button

1

2

3

4

5

6

7

8

MENU button

IMAGE button

RESET/ON/ALL-OFF switch

14


Remote Control Battery Installation

1

Open the battery compartment lid.

2

Install new batteries into the compartment.

Press the lid downward and slide it.

Two AAA size batteries

For correct polarity (+ and –), be sure battery terminals are in contact with pins in compartment.

3

Replace the compartment lid.

To insure safe operation, please observe the following precautions :

● Use two (2) AAA or LR03 type alkaline batteries.

● Always replace batteries in sets.

● Do not use a new battery with a used battery.

● Avoid contact with water or liquid.

● Do not expose the remote control to moisture or heat.

● Do not drop the remote control.

● If the battery has leaked on the remote control, carefully wipe the case clean and install new batteries.

● Risk of an explosion if battery is replaced by an incorrect type.

● Dispose of used batteries according to the instructions.

Remote Control Operating Range

Point the remote control toward the projector (Infrared

Remote Receiver) when pressing the buttons. Maximum operating range for the remote control is about 16.4’ (5 m) and 60 degrees in front of the projector.

16.4’

(5 m)

60°

Remote control

Adjustable Feet

Projection angle can be adjusted up to 10.0 degrees with the adjustable feet.

Lift the front of the projector and pull the feet lock latches on both side of the projector upward.

Release the feet lock latches to lock the adjustable feet and rotate the adjustable feet to a proper height, and tilt.

Keystone distortion can be adjusted automatically with the

Auto setup function or manually by using the remote control or the menu operation (see pages 26, 45, 46).

Adjustable Feet

Feet Lock Latches

15

Installation

Positioning the Projector

For projector positioning, see the figures below. The projector should be set perpendicularly to the plane of the screen.

✔

Notes:

•The brightness in the room has a great influence on picture quality. It is recommended to limit ambient lighting in order to obtain the best image.

•All measurements are approximate and may vary from the actual sizes.

A : B = 9 : 1

43.0' (13.1m)

27.5' (8.4m)

18.4' (5.6m)

13.8' (4.2m)

9.2' (2.8m)

3.6' (1.1m)

100 "

150 "

96 "

40 " 64 "

200

128

"

"

300 "(wide)

Max. Zoom

192 "

(Inch Diagonal)

300 "(tele)

Min. Zoom

A

(Center)

B

USB

Screen Size

(W x H) mm

4 : 3 aspect ratio

Zoom (min)

Zoom (max)

40”

813 x 610

5.6' (1.7m)

3.6' (1.1m)

100”

2032 x 1524

14.4' (4.4m)

9.2' (2.8m)

150”

3048 x 2286

21.6' (6.6m)

13.8' (4.2m)

200”

4064 x 3048

28.9' (8.8m)

18.4' (5.6m)

300”

6096 x 4572

43.0' (13.1m)

27.5' (8.4m)

16

Installation

Connecting to a Computer

Cables used for connection

• VGA Cable (Mini D-sub 15 pin)

✽

• DVI Cable ✽

• DVI-VGA Cable

• USB Cable

• Audio Cables

✽

( ✽ = Not supplied with this projector.)

Audio Output USB port Monitor Output

Monitor Output or

Monitor Input

External Audio Equipment

Audio Input

USB cable DVI cable ✽

DVI-VGA cable

VGA cable

✽

Audio cable

(stereo) ✽

USB

COMPUTER IN 1/

DVI-I

Audio cable

✽

(stereo)

COMPUTER IN 2

/COMPONENT IN

/MONITOR OUT

This terminal is switchable. Set up the terminal as either Computer input or

Monitor output. (See Page 49.)


DVI-I

C O M P U T E R /

COMPONENT

AUDIO IN

✔

Notes:

•Input sound to the COMPUTER / COMPONENT AUDIO IN terminal when using the COMPUTER IN 1 / DVI-I and the

COMPUTER IN 2 / COMPONENT IN / MONITOR OUT terminal as input.

• When connecting the AUDIO OUT to external audio equipment, the projector's built-in speaker is disconnected.

• When the cable is of the longer variety, it is advisable to use the

COMPUTER IN 1 / DVI-I and not the COMPUTER IN 2 /

COMPONENT IN / MONITOR OUT.

ON ON

• USB cable connection is needed when operating the computer with

the remote control or using the PAGE ed buttons on the remote control.

(VARIABLE)

R AUDIO OUT

COMPUTER IN 2

/ COMPONENT IN

MONITOR OUT

VIDEO IN

S-VIDEO IN

L

(MONO)

COMPUTER /

COMPONENT

AUDIO IN

AUDIO OUT

(stereo)

Unplug the power cords of both the projector and external equipment from the AC outlet before connecting cables.

17

Installation

Connecting to Video Equipment


• Video and Audio Cable (RCA x 3)

✽

• S-VIDEO Cable ✽

• Audio Cable ✽

(

✽ = Not supplied with this projector.)

S-video Output Composite Video and Audio Output

(R) (L) (Video)

S-video cable

✽

Video and audio cable

✽


Audio Input

S-VIDEO

(R) (L)

AUDIO IN

(Video)

VIDEO IN


DVI-I

(VARIABLE)

R

AUDIO OUT

COMPUTER IN 2

/ COMPONENT IN

MONITOR OUT

VIDEO IN

S-VIDEO IN

L

(MONO)

COMPUTER /

COMPONENT

AUDIO IN

Audio cable ✽

(stereo)

AUDIO OUT

(stereo)

18

✔

Notes:

•When connecting AUDIO OUT to external audio equipment, the projector's built-in speaker is disconnected.

•The S-VIDEO jack connection overrides the VIDEO jack connection when selecting AUTO in the Input Menu (p.38).


Installation

Connecting to Component Video Equipment


• Audio Cables

✽

• Scart-VGA Cable ✽

• Component Cable ✽

• Component-VGA Cable

✽

(

✽ = Not supplied with this projector.)

Audio Output

Audio cable

(stereo)

✽

RGB Scart 21pin Output

Component Video Output

(Y, Pb/Cb, Pr/Cr)

Component cable ✽

Scart-VGA cable ✽

Component-VGA cable

✽


Audio Input


DVI-I

COMPUTER IN 2

/COMPONENT IN /MONITOR OUT

This terminal is switchable. Set up the terminal as either Computer input or

Monitor output. (See Page 49.)

Audio cable

✽

(stereo)

(VARIABLE)

R AUDIO OUT

COMPUTER IN 2

/ COMPONENT IN

MONITOR OUT

VIDEO IN

S-VIDEO IN

L

(MONO)

COMPUTER /

COMPONENT

AUDIO IN

AUDIO OUT

(stereo)

COMPUTER/

COMPONENT

AUDIO IN

✔Notes:

•When connecting the AUDIO OUT to external audio equipment, the projector’s built-in speaker is disconnected.

•See page 69 for ordering optional cables.


19

Installation

Connecting the AC Power Cord

This projector uses nominal input voltages of 100–120 V or

200–240 V AC and it automatically selects the correct input voltage. It is designed to work with single-phase power systems having a grounded neutral conductor. To reduce the risk of electrical shock, do not plug into any other type of power system.

If you are not sure of the type of power being supplied, consult your authorized dealer or service station.

Connect the projector with all peripheral equipment before turning the projector on.

CAUTION

For safety, unplug the AC power cord when the projector is not in use. When the projector is connected to an outlet with the AC power cord, it is in stand-by mode and consumes a little electric power.

Connect the AC power cord (supplied) to the projector.

The AC outlet must be near this equipment and must be easily accessible.

NOTE ON THE POWER CORD

AC power cord must meet the requirements of the country where you use the projector.

Confirm the AC plug type with the chart below and proper AC power cord must be used.

If supplied the AC power cord does not match your AC outlet, contact your sales dealer.

Projector side AC outlet side

For the U.S.A. and Canada

Ground

For Continental Europe

To power cord connector on your projector.

To the AC outlet.

(120 V AC)

To the AC outlet.

(200 - 240 V AC)

20

Basic Operation

Turning On the Projector

1

2

3

Complete peripheral connections (with a computer,

VCR, etc.) before turning on the projector.

Connect the projector’s AC power cord into an AC outlet. The POWER indicator lights red.

Press the POWER ON-OFF button on the top control or on the remote control. The POWER indicator lights green and the cooling fans start to operate. The preparation display appears on the screen and the count down starts.

4 After the countdown, the input source that was selected the last time and the lamp control status icon

(see page 51) appear on the screen.

If the projector is locked with a PIN code, PIN code input dialog box will appear. Enter the PIN code as instructed below.

Enter a PIN code

Use the Point ed buttons to enter a number. Press the Point

8 button to fix the number and move the red frame pointer to the next box. The number changes to “ ✳.” If you fixed an incorrect number, use the Point 7 button to move the pointer to the number you want to correct, and then enter the correct number.

Repeat this step to complete entering a four-digit number.

After entering the four-digit number, move the pointer to

“Set.” Press the SELECT button so that you can start to operate the projector.

If you entered an incorrect PIN code, “PIN code” and the number ( ✳✳✳✳) will turn red for a moment. Enter the correct

PIN code all over again.

What is PIN code?

PIN (Personal Identification Number) code is a security code that allows the person who knows it to operate the projector. Setting a PIN code prevents unauthorized use of the projector.

A PIN code consists of a four-digit number. Refer to the PIN code lock function in the Setting Menu on pages 52–53 for locking operation of the projector with your PIN code.

CAUTION ON HANDLING PIN CODE

If you forget your PIN code, the projector can no longer be started. Take a special care in setting a new PIN code; write down the number in a column on page 72 of this manual and keep it at hand. Should the PIN code be missing or forgotten, consult your dealer or service center.

16

The preparation display will disappear after 30 seconds.

Selected Input Source and Lamp Control

Lamp control status

(See page 51 for Lamp control status.)

✔

Note:

•The Filter warning and Lamp replacement icons may appear on the screen depending on the usage state of the projector.

PIN Code Input Dialog Box

After the OK icon disappears, you can operate the projector.

✔

Notes:

•When the Logo select function is set to “Off,” the logo will not be shown on the screen (p.47).

•When the “Countdown off” or “Off” is selected in the Display function, the countdown will not be shown on the screen (p.46).

•During the countdown period, all operations are invalid.

•If the correct PIN code number is not entered within three minutes after the PIN code dialog box appeared, the projector will be turned off automatically.

•The “1234” is set as the initial PIN code at the factory.

•When the Input Search function is set to “On2”, the input signal will be searched automatically

(p.49)

21


Turning Off the Projector

1

2

Press the POWER ON-OFF button on the top control or on the remote control, and “Power off?” appears on the screen.

Press the POWER ON-OFF button again to turn off the projector. The POWER indicator starts to blink red, and the cooling fans keep running. (You can select the level of fans’ quietness and speed. See “Fan” on page 54.)

At this time, you can unplug the AC power cord even if the fans are still running.

3 When the projector has cooled down enough, the

POWER indicator stops blinking and you can turn on the projector. After it is cooled down completely, unplug the AC power cord.

“Power off?” disappears after 4 seconds.

TO MAINTAIN THE LIFE OF THE LAMP, ONCE

YOU TURN THE PROJECTOR ON, WAIT AT

LEAST FIVE MINUTES BEFORE TURNING IT OFF.

✔

Notes:

•When the On start function is set to “On,” the projector will be turned on automatically by connecting the AC power cord to an AC outlet (p.51).

•Do not operate the projector continuously without rest. Continuous use may result in shortening the lamp life. Turn off the projector and let stand for about an hour in every 24 hours.

•The running speed of cooling fans is changed according to the temperature inside the projector.

•Do not put the projector in a case before the projector is cooled enough.

•If the WARNING indicator blinks or lights red, see “Warning

Indicators” on page 56.

•While the POWER indicator is blinking, the lamp is being cooled down and the projector cannot be turned on. Wait until the

POWER indicator stops blinking to turn on the projector again.

22


How to Operate the On-Screen Menu

The projector can be adjusted or set via the On-Screen

Menu. For each adjustment and setting procedure, refer to the respective sections in this manual.

1

2

3

Press the MENU button on the top control or the remote control to display the On-Screen Menu.

Use the Point 7 8 buttons to select a Menu icon. Use the Point ed buttons to select an item in the selected menu.

Press the SELECT button to show the item data. Use the Point 7 8 buttons to adjust the values.

To close the On-Screen Menu, press the MENU button again.

✔

Note:

•The selected item is not active until the SELECT button is pressed.

Top Control

ON

-

OFF

POWER

MENU

WARNING LAMP REP

INPUT

AUT

O SET

U

SELECT

MENU button

POINT buttons

- VOLUME

+ V

OLU

SELECT button

Remote Control

POINT buttons

SELECT button

MENU button

On-Screen Menu

Menu icon

Menu bar

Pointer (red frame)

Press the Point ed buttons to move the pointer.

Item

SELECT button

Pointer

(red frame)

Quit

Exit this menu.

Item data

Press the Point 7 8 buttons to adjust the value.

23


Menu Bar

For detailed functions of each menu, see “Menu Tree” on pages 64–65.

For computer source

Guide Window

Show the selected

Menu of the On-

Screen Menu.

PC System Menu

Used to select computer system (p.30).

Image Select Menu

Used to select an image mode among Dynamic,

Standard, Real,

Blackboard(Green), and

Image 1–4 (p.34).

Screen Menu

Used to adjust size of the image [Normal/

True/Wide/Full screen/Digital zoom

+/–] (pp.36–37).

Setting Menu

Used to set the projector’s operating configurations (pp.45-

55).

Input Menu

Used to select an input source either

Computer or Video.

(pp.28-29).

PC Adjust Menu Image Adjust Menu

Used to adjust parameters to match with input signal format (pp.31–33).

Used to adjust computer image [Contrast/Brightness/

Color temp./White balance

(R/G/B)/Sharpness/Gamma]

(pp.35–36).

Sound Menu Wired Menu

Used to adjust the volume or mute the sound

(p.25).

See owner’s manual

“Network Set-up and Operation”.

For video source

Input Menu

Used to select an input source either

Video or Computer

(pp.38, 39).


Used to select an image mode among Dynamic, Standard,

Cinema, Blackboard(Green) and Image 1–4 (p.41).

Screen Menu

Used to set size of image to Normal or

Wide (p.44).

24

Same function as menu for computer source.

AV System Menu

Used to select system of selected video source (p.40).

Image Adjust Menu

Used to adjust picture image

[Contrast/Brightness/Color/Tint/

Color temp./White balance

(R/G/B)/Sharpness/Gamma/

Noise reduction/Progressive]

(pp.42–43).

Same function as computer menu.


Sound Adjustment

Direct Operation

Volume

Press the VOLUME+/– buttons on the top control or on the remote control to adjust the volume. The volume dialog box appears on the screen for a few seconds.

Mute

Press the MUTE button on the remote control to temporarily turn off the sound. To turn the sound back on, press the

MUTE button again or press the VOLUME +/– buttons. The

Mute function is also effective for the AUDIO OUT jack.

Top Control

SELECT

- VOLUME

+ VOLUME

VOLUME+/buttons

Remote Control

VOL- button

VOL+ button

Menu Operation

1 Press the MENU button to display the On-Screen

Menu. Use the Point 7 8 buttons to move the red frame pointer to the Sound Menu icon.

2 Use the Point ed buttons to move the red frame pointer to the desired item, and then press the SELECT button.

Volume

Press the Point 8 button to turn up the volume; press the

Point 7 button to turn down the volume.

Mute

Press the Point 7 8 buttons to switch the mute function

On/Off. When the sound is turned off, “On” is displayed.

Press the Point 7 8 buttons again to turn the sound back on.

Volume Dialog Box

MUTE button

Approximate level of the volume.

Press the MUTE button to set the Mute function On or Off. The dialog box disappears after 4 seconds.

Sound Menu

Sound Menu icon

Approximate level of the volume.

Exit the Sound Menu.

Zoom and Focus Adjustment

Rotate the Zoom Lever to zoom in and out.

Rotate the Focus Ring to adjust the focus of the image.

Zoom Lever

Focus Ring

25


Auto Setup Function

Auto setup function is provided to automatically correct

Keystone distortion according to the projector’s tilt and adjust the computer display parameters (Fine sync, Total dots, and

Picture position) by just pressing the AUTO SET UP button on the top control or the AUTO SET button on the remote control. The operational setup for the Auto setup can be changed in the Setting menu. Refer to page 45 for the setting of the Auto setup function.

✔Notes:

•Auto Keystone corrects vertical distortion only; it does not correct horizontal distortion.

•Auto Keystone cannot work when Ceiling feature is set to “On” in the Setting menu (p.49).

•Perfect correction of the image distortion cannot be ensured with the

Auto setup function. If the distortion cannot be corrected properly by pressing the AUTO SETUP/AUTO SET button, adjust manually by pressing the KEYSTONE button on the remote control or selecting

Keystone in the Setting menu (p.46).

•Fine sync, Total dots, Horizontal and Vertical position of some computers cannot be fully adjusted with the Auto PC Adjustment function. When the image is not provided properly with this operation, manual adjustments are required (pp.32–33).

Keystone Correction

If a projected picture still has keystone distortion after pressing the AUTO SET UP button on the top control or the

AUTO SET button on the remote control, correct the image manually as follows:

Press the KEYSTONE button on the remote control. The

Keystone dialog box appears. Use the Point ed buttons to correct keystone distortion. The keystone adjustment can be stored (see page 46).

Reduce the upper width with the Point e button.

Reduce the lower width with the Point d button.

Top Control

AUTO SET UP button

O

N

-

OFF

POWER

MENU


INPUT

AUT

O SET

UP

SELECT

+ VOLUME

- VOLUME

POINT ed buttons

Remote Control

KEYSTONE button

AUTO SET button


• The white arrows indicate that there is no correction.

• A red arrow indicates the direction of correction.

• An arrow disappears at the maximum correction.

• If you press the KEYSTONE button on the remote control once more while the keystone dialog box is being displayed, the keystone adjustment will be canceled.

26

Remote Control Operation

Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons enables you to make the desired operation quickly without calling up the On-Screen Menu.

Remote Control

COMPUTER/VIDEO/NETWORK button

Press the COMPUTER, VIDEO, or NETWORK button on the remote control to select the input source. See pages 28-29,

38-39 for details.

Refer to the owner’s manual “Network Set-up and

Operation” for details about the network input.

COMPUTER/VIDEO

/NETWORK button


FREEZE button

Press the FREEZE button on the remote control to freeze the picture on the screen. To cancel the Freeze function, press the FREEZE button again or press any other button.

Remote Control

AUTO PC button

Press the AUTO PC button on the remote control to operate the Auto PC Adj. function. The computer screen adjustment can be done easily by pressing this button. See page 31 for details.

AUTO PC button

D.ZOOM buttons

Press the D.ZOOM buttons on the remote control to enter to the Digital zoom +/– mode. See page 37 for details.

D.ZOOM

buttons

LAMP CONTROL button

Press the LAMP CONTROL button on the remote control to select the lamp mode for changing the brightness on the screen.

Normal ....Normal brightness

Auto ........The brightness according to the input signal

Eco ..........Lower brightness reduces the lamp power consumption and extends the lamp life.

LAMP

CONTROL button

NO SHOW button

Press the NO SHOW button on the remote control to black out the image. To restore to normal, press the NO SHOW button again or press any other button. When a projected image is captured and set as “User” in the Logo selection

(see page 47), the screen changes each time you press the

NO SHOW button as follows.

black out

➜ the captured image ➜ normal ➜

• • • • •


FREEZE button

NO SHOW button

P-TIMER button

IMAGE button

“No show” disappears after 4 seconds.

P-TIMER button

Press the P-TIMER button on the remote control. The P-Timer display “00:00” appears on the screen and the countdown starts (00:00–59:59).

To stop the countdown, press the P-TIMER button. To cancel the P-Timer function, press the P-TIMER button again.

P-Timer display

IMAGE button

Press the IMAGE button on the remote control to select a desired image mode of the screen. See pages 34, 41 for details.

✔

Note:

• See the previous page for the description of other buttons.

27

Computer Input

Input Source Selection (RGB: Computer 1 (Analog)/Computer 2 )


Choose either Computer 1 (Analog) or Computer 2 by pressing the INPUT button on the top control or press the

COMPUTER button on the remote control.

Before using these buttons, correct input source should be selected through Menu operation as described below.

Top Control

ON

-

OFF

POWER

MENU

WARNING

INPUT

SELECT

INPUT button

Computer 1 (Analog)

Computer 1 (Digital)

Computer 2

Video

Wired

Remote Control

COMPUTER button



Computer 2

Input Menu icon

Menu Operation


Menu. Use the Point 7 8 buttons to move the red frame pointer to the Input Menu icon.

2 Use the Point ed buttons to move the red arrow pointer to either Computer 1 (Analog) or Computer 2, and then press the SELECT button.

3 When selecting Computer 1 (Analog), RGB input source will be selected directly.

When selecting Computer 2, the Source Select Menu appears. Move the pointer to RGB and then press the

SELECT button.

Input Menu

Input Menu

Move the pointer (red arrow) to Computer 1

(Analog) and press the

SELECT button.

Input Menu icon

Computer

2

Move the pointer (red arrow) to Computer 2 and press the SELECT button.

Move the pointer

(red arrow) to RGB.

28

✔

Notes:

•Computer 2 is not displayed when the COMPUTER IN 2 /

COMPONENT IN / MONITOR OUT terminal is set as Monitor out.

(p.49)

•Computer 2 can accept only RGB signal.

•Wired, Wireless, and Memory Viewer are for the Network function.

See owner’s manual “Network Set-up and Operation” and owner’s manual of Memory viewer (optionally available).

•When the Input Search function is set to “On1” or “On2”, the input signal will be searched automatically (p.49).


Input Source Selection (RGB(PC digital), RGB(AV HDCP))


Choose Computer 1(Digital) by pressing the INPUT button on the top control or press the COMPUTER button on the remote control.


Top Control

ON

-

OFF

POWER

MENU

WARNING

INPUT

SELECT

INPUT button



Computer 2

Video

Wired

Remote Control

COMPUTER button



Computer 2

Input Menu icon

Input Menu

Menu Operation



2 Use the Point ed buttons to move the red arrow pointer to Computer 1 (Digital), and then press the

SELECT button.

3 After the Source Select Menu appeared for Computer

1 (Digital), move the pointer to RGB (PC digital) or RGB

(AV HDCP), and then press the SELECT button.

Move the pointer

(red arrow) to

Computer 1 (Digital) and press the

SELECT button.

Computer

1

Move the pointer to the source that you want to select and press the SELECT button.

✔

Notes:



(p.49)

•Computer 2 can accept only RGB signal.

•HDCP (High-bandwidth Digital Content Protection) is a system for protecting digital entertainment content delivered by DVI (Digital

Visual Interface) from being copied. The specification of HDCP is decided and controlled by Digital Content Protection, LLC. Should the specification be changed, this projector may not display the digital content protected by HDCP.

•Wired, Wireless, Memory viewer are for the Network function.

See owner’s manual “Network Set-up and Operation” and owner’s manual of Memory viewer (optionally available).


29


Computer System Selection

This projector automatically tunes to various types of computers based on VGA, SVGA, XGA, SXGA, WXGA, or

UXGA with its Multi-scan system and Auto PC Adjustment. If a computer is selected as a signal source, this projector automatically detects the signal format and tunes to project a proper image without any additional settings. (Signal formats provided in this projector are shown on pages 66-67.)

One of the following messages may appear when:

Auto

-----

Mode 1

SVGA 1

The projector cannot recognize the connected signal conforming to the provided PC Systems.

The “Auto” is displayed on the System Menu box and the Auto PC Adjustment function works to display proper images. If the image is not projected properly, a manual adjustment is required (pp.32-33).

There is no signal input from the computer.

Check the connection between your computer and the projector. (See “Troubleshooting” on page 62.)

The preset system is manually adjusted in the

PC Adjust Menu. The adjusted data can be stored in Mode 1–5 (pp.32-33).

PC Systems provided in this projector is chosen.

The projector chooses a proper system provided in the projector and displays it.

*Mode 1 and SVGA 1 are examples.

PC System Menu

The Auto PC Adjustment function operates to adjust the projector.

Selecting Computer System Manually

PC system can also be selected manually.

1

2

Press the MENU button to display the On-Screen

Menu. Use the Point 7 8 buttons to move the red frame pointer to the PC System Menu icon.

Use the Point ed buttons to move the red arrow pointer to the desired system and then press the

SELECT button.

PC System Menu

The PC System Menu icon

Selected system is displayed.

Systems in this dialog box can be selected.

Customized Mode (1–5) set in the PC Adjust Menu (pp.32–33).

30


Auto PC Adjustment

Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal and Vertical positions to conform to your computer.

Remote Control Direct Operation

The Auto PC adjustment function can be operated directly by pressing the AUTO PC button on the remote control.

AUTO PC button

Menu Operation

1

Auto PC Adj.


Menu. Use the Point 7 8 buttons to move the red frame pointer to the PC Adjust Menu icon.

2 Use the Point ed buttons to move the red frame pointer to Auto PC Adj. and then press the SELECT button twice.

To store adjustment parameters

The adjusted parameters from the Auto PC Adjustment can be stored in the projector. Once the parameters are stored, the setting can be done just by selecting a Mode (1–5) in the PC System Menu (see page 30). See also “Store” on page 33.

✔

Notes:


•The Auto PC Adjustment cannot be operated when 480i, 575i,

480p, 575p, 720p,1035i, or 1080i is selected in the PC System

Menu (p.30), or when the signal is coming from the DVI-terminal.

PC Adjust Menu

PC Adjust Menu icon

Move the red frame pointer to Auto PC Adj. and press the SELECT button.

“Please wait...” appears while the Auto PC adjustment is in process.

31


Manual PC Adjustment

Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector.

Manual PC Adjustment enables you to precisely adjust several parameters to match those signal formats. The projector has five independent memory areas to store those parameters manually adjusted. It allows you to recall the setting for a specific computer.

PC Adjust Menu


Menu. Use the Point 7 8 buttons to move the red frame pointer to the PC Adjust Menu icon.

2 Use the Point ed buttons to move the red frame pointer to the desired item and then press the SELECT button to display the adjustment dialog box. Use the

Point 7 8 buttons to adjust the setting value.

PC Adjust Menu icon

Move the red frame pointer to the desired item and press the SELECT button.

Fine sync

Use the Point 7 8 buttons to adjust the value, eliminating a flicker from the image displayed (from 0 to 31).

Status (Stored/Free) of the selected Mode.

Selected Mode

Total dots

Use the Point 7 8 buttons to adjust the number of total dots in one horizontal period to match your PC image.

Use the Point 7 8 buttons to adjust the value.

Horizontal

Use the Point 7 8 buttons to adjust the horizontal picture position.

Press the SELECT button here to adjust other items.

Vertical

Use the Point 7 8 buttons to adjust the vertical picture position.

Current mode

Press the SELECT button to show H-sync freq. and V-sync freq. of the connected computer.

Clamp

Use the Point 7 8 buttons to adjust the clamp level. When the image has dark bars, try this adjustment.

Press the SELECT button at

Current mode to show the information of the connected computer.

32


Display area H

Use the Point 7 8 buttons to adjust the horizontal area displayed by this projector.

Display area V

Use the Point 7 8 buttons to adjust the vertical area displayed by this projector.

Reset

To reset the adjusted data, select Reset and press the

SELECT button. A confirmation box appears and then select

[Yes]. All adjustments will return to their previous figures.

Mode free

To clear the stored data, select Mode free and then press the SELECT button. Move the red arrow pointer to the

Mode that you want to clear and then press the SELECT button.

Store

To store the adjusted data, select Store and then press the

SELECT button. Move the red arrow pointer to one of the

Modes 1 to 5 in which you want to store, and then press the SELECT button.

Quit

Exit the PC Adjust Menu.

Move the red frame pointer to the desired item and press the SELECT button.

To clear adjusted data

This Mode has stored parameters.

Vacant

Values of “Total dots”,

“Horizontal”, “Vertical”,

“Display area H”, and

“Display area V”.

To store adjusted data

Close this dialog box.

✔

Notes:

•Display area (H/V) cannot be selected when 480i, 575i, 480p,

575p, 720p, 1035i, or 1080i is selected in the PC System Menu

(p.30).

•PC Adjust Menu cannot be selected when Computer 1(Digital) is selected in the Input Menu (p.29).

33


Image Mode Selection


Select the desired image mode from among Dynamic,

Standard, Real, Blackboard (Green), Image 1, Image 2,

Image 3, and Image 4 by pressing the IMAGE button on the remote control.

Dynamic

For viewing pictures in a bright room.

Standard

Normal picture mode preset on the projector.

Real

Picture mode with improved halftone for graphics.

Blackboard (Green)

For the image projected on a blackboard.

This mode help enhance the image projected on a blackboard.

This is mainly effective on a green colored board, not truly effective on a black colored board.

Image 1–4

For viewing with the user preset image mode in the Image

Adjust Menu (see pages 35-36). This Image memory is provided in each computer, component, and video input source.

Menu Operation


Menu. Use the Point 7 8 buttons to move the red frame pointer to the Image Select Menu icon.

2 Use the Point ed buttons to move the red frame pointer to the desired image mode and then press the

SELECT button.

Dynamic


Standard


Real

Picture mode with improved halftone for graphics.

Blackboard(Green)

For the image projected on a blackboard. See above for further description.

Image 1~4


Adjust Menu (see pages 35-36).

Remote Control

IMAGE button

IMAGE button

Dynamic

Standard

Real


Image 1

Image 2

Image 3

Image 4


Image Select Menu icon

Move the red frame pointer to the desired image mode and press the SELECT button.

The selected image mode is check marked.

34


Image Adjustment


Menu. Use the Point 7 8 buttons to move the red frame pointer to the Image Adjust Menu icon.



Contrast

Press the Point 7 button to decrease the contrast; press the Point 8 button to increase the contrast (from 0 to 63).

Brightness

Press the Point 7 button to decrease the brightness; press the Point 8 button to increase the brightness (from 0 to 63).

Color temp.

Use the Point 7 8 buttons to select the desired Color temp.

level (High, Mid, Low, or XLow).

White balance (Red)

Press the Point 7 button to lighten red tone; press the

Point 8 button to deepen red tone (from 0 to 63).

White balance (Green)

Press the Point 7 button to lighten green tone; press the

Point 8 button to deepen green tone (from 0 to 63).

White balance (Blue)

Press the Point 7 button to lighten blue tone; press the

Point 8 button to deepen blue tone (from 0 to 63).

Sharpness

Press the Point 7 button to decrease the sharpness of the image; press the Point 8 button to increase the sharpness of the image (from 0 to 15).

Gamma

Use the Point 7 8 buttons to adjust the gamma value to obtain a better balance of contrast (from 0 to 15).

Reset





Image Adjust Menu icon

Move the red frame pointer to the desired item and then press the SELECT button.

Selected Image mode

Use the Point 7 8 buttons to adjust the setting value.

✔

Note:

•When the White balance Red, Green, or Blue is adjusted, the Color temp. level will change to “Adj.”.

35


Store

To store the adjusted data, select Store and press the

SELECT button. Use the Point ed buttons to select one from Image 1 to 4 and press the SELECT button.

A confirmation box appears and then select [Yes]. Stored data can be called up by selecting an “Image (1–4)” in the

Image Mode Selection on page 34.

Quit

Exit the Image Adjust Menu.

Image Mode Menu

Move the red frame pointer to an image item to be set and then press the

SELECT button.

Store icon

A confirmation box appears and then select

[Yes]

Screen Size Adjustment

This projector has the picture screen resize function, which enables you to customize the image size.

1

2


Menu. Use the Point 7 8 buttons to move the red frame pointer to the Screen Menu icon.

Use the Point ed buttons to move the red frame pointer to the desired function and then press the

SELECT button.

Normal

Provide the image to fit the screen size.

True

Provide the image in its original size. When the original image size is larger than the screen size (1024 x 768), the projector enters to the panning mode automatically. Use the

Point ed7 8 buttons to pan the image. When adjusted, the arrows will turn red. When reached to the correction limits, the arrows will disappear.

Wide

Provide the image to fit the wide video aspect ratio (16:9) by expanding the image width uniformly. This function can be used for providing a squeezed video signal at 16:9.

Full screen

Provide the full screen image.

Screen Menu

Screen Menu icon

Move the red frame pointer to the function and press the SELECT button.

✔

Notes:

•This Screen Menu cannot be operated when

720p(HDTV), 1035i (HDTV), or 1080i (HDTV) is selected in the PC System Menu (p.30).

•This projector cannot display any resolution higher than 1600 x 1200. If your computer’s screen resolution is higher than it, reset the resolution to the lower before connecting to the projector.

•The image data in other than 1024 x 768 is modified to fit the screen size in initial mode.

•True, Full screen, and Digital zoom +/– cannot be selected when 480i, 575i, 480p, or 575p is selected in the PC System Menu (p.30).

36


For zooming in and out the images

Digital zoom +

Select Digital zoom +. The On-Screen Menu disappears and

“D. zoom +” appears. Press the SELECT button to expand the image size. Use the Point ed7 8 buttons to pan the image. The Panning function can work only when the image is larger than the screen size.

A projected image can be also expanded by pressing the

D.ZOOM e button on the remote control.

Digital zoom –

Select Digital zoom –. The On-Screen Menu disappears and

“D. zoom –” appears. Press the SELECT button to compress image size.

The projected image can be also compressed by pressing the

D.ZOOM d button on the remote control.

To exit the Digital zoom +/– mode, press any button except the D.ZOOM ed buttons, SELECT, and Point buttons.

To return to the previous screen size, select a screen size from the Screen Size Adjustment Menu or select an input source from the Input Source Selection Menu (see pages

28-29) again, or adjust the screen size with the D.ZOOM

ed buttons.

Remote Control

✔

Notes:

POINT buttons

SELECT button

D.ZOOM + button

D.ZOOM - button

•The panning function may not operate properly if the stored Mode in the PC Adjust Menu is used

(p.33).

•Minimum compression ratio can be limited depending on the input signal or when the

Keystone function is working.

• True, Full screen, and Digital zoom +/– cannot be selected when 480i, 575i, 480p, or 575p is selected in the PC System Menu (p.30).

•Digital zoom +/- cannot be selected when Full screen or True is selected.

37

Video Input

Input Source Selection (Video, S-video)


Choose Video by pressing the INPUT button on the top control or the VIDEO button on the remote control.

Before using these buttons, correct input source should be selected through menu operation as described below.

Top Control

ON

-

OFF

POWER

MENU

WARNING

INPUT

SELECT

INPUT button

INPUT button



Computer 2

Video

Wired

Remote Control

VIDEO button

38

Menu Operation



2

3

Use the Point ed buttons to move the red arrow pointer to Video and then press the SELECT button to display the Source Select Menu.

Move the pointer to the desired source and then press the SELECT button.

Auto

When selecting Auto, the projector automatically detects incoming video signal, and adjusts itself to optimize its performance. The projector selects connection in the following order:

1. S-video

2. Video

Video

When video input signal is connected to the

VIDEO jack, select Video.

S-video

When video input signal is connected to the S-

VIDEO jack, select S-video.

✔

Notes:



(p.49)

•Wired, Wireless, and Memory viewer are for the Network function.

See the owner’s manual “Network Set-up and Operation” and owner’s manual of Memory viewer (optionally available).


Input Menu

VIDEO

Input Menu icon

Move the pointer to

Video and press the

SELECT button.

Source Select Menu (VIDEO)

Move the pointer to the source that you want to select and press the SELECT button.

Video Input

Input Source Selection (Component, RGB Scart 21-pin)


Choose Computer 2 by pressing the INPUT button on the top control or press the COMPUTER button on the remote control.


Top Control

ON

-

OFF

POWER

MENU

WARNING

INPUT

SELECT

INPUT button



Computer 2

Video

Wired

Remote Control

Menu Operation

1

2

3



Use the Point ed buttons to move the red arrow pointer to Computer 2 and then press the SELECT button.

After the Source Select Menu appeared for Computer

2, move the pointer to Component or RGB(Scart) and then press the SELECT button.

Input Menu

COMPUTER button



Computer 2

Input Menu icon

Component

When the input source is coming from video equipment connected to the COMPUTER IN

2/COMPONENT IN/MONITOR OUT terminal with a Component-VGA Cable, select

Component.

Move the pointer (red arrow) to Computer 2 and press the SELECT button.

Computer

2

RGB (Scart)

When the input source is coming from video equipment connected to the COMPUTER IN

2/COMPONENT IN/MONITOR OUT terminal with a Scart-VGA Cable, select RGB (Scart).

Source Select Menu

Move the pointer to

Component or RGB(Scart) and press the SELECT button.

✔

Note:



(p.49)

•Wired, Wireless, Memory viewer are for the Network function. See owner’s manual “Network Set-up and Operation” and owner’s manual of Memory viewer (optionally available).


39

Video Input

Video System Selection

1

2


Menu. Use the Point 7 8 buttons to move the red frame pointer to the AV System Menu icon.

Use the Point ed buttons to move the red arrow pointer to the desired system and then press the

SELECT button.

Video or S-Video

Auto

The projector automatically detects an incoming video system, and adjusts itself to optimize its performance.

When Video System is PAL-M or PAL-N, select the system manually.

PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N

If the projector cannot reproduce proper video image, select a specific broadcast signal format from among PAL,

SECAM, NTSC, NTSC 4.43, PAL-M, and PAL-N.

AV System Menu (Video or S-Video)

AV System Menu icon

The selected system is displayed.

Move the pointer to the desired system and press the SELECT button.

Component

Auto

The projector automatically detects an incoming video signal, and adjusts itself to optimize its performance.

COMPONENT VIDEO SIGNAL FORMAT

If the projector cannot reproduce proper video image, select a specific component video signal format from among 480i,

575i, 480p, 575p, 720p, 1035i, and 1080i.

AV System Menu (Component)

AV System Menu icon

The selected system is displayed.

Move the pointer to the desired system and press the SELECT button.

40

✔

Note:

•The AV System Menu cannot be selected when selecting RGB

(Scart).

Video Input

Image Mode Selection


Select the desired image mode from among Dynamic,

Standard, Cinema, Blackboard (Green), Image 1, Image 2,

Image 3, and Image 4 by pressing the IMAGE button on the remote control.

Dynamic


Standard


Cinema

Picture mode adjusted with fine tone.


For the image projected on a blackboard.

This mode help enhance the image projected on a blackboard.

This is mainly effective on a green colored board, not truly effective on a black colored board.

Image 1–4


Adjust Menu (see pages 42–43). This Image memory is provided in each computer, component, and video input source.

Menu Operation


Menu. Use the Point 7 8 buttons to move the red frame pointer to the Image Select Menu icon.

2 Use the Point ed buttons to move the red frame pointer to the desired image mode and then press the

SELECT button.

Dynamic


Standard


Cinema

Picture mode adjusted with fine tone.


For the image projected on a blackboard. See above for further description.

Image1–4


Adjust Menu (see pages 42–43).

Remote Control

IMAGE button

IMAGE button

Dynamic

Standard

Cinema


Image 1

Image 2

Image 3

Image 4


Image Select Menu icon

Move the red frame pointer to the desired image mode and press the SELECT button.

The selected image mode is check marked.

41

Video Input

Image Adjustment


Menu. Use the Point 7 8 buttons to move the red frame pointer to the Image Adjust Menu icon.



Contrast

Press the Point 7 button to decrease the contrast; press the Point 8 button to increase the contrast (from 0 to 63).

Brightness

Press the Point 7 button to decrease the brightness; press the Point 8 button to increase the brightness (from 0 to 63).

Color

Press the Point 7 button decrease the intensity of the color; press the Point 8 button increase the intensity of the color (from 0 to 63).

Tint

Press the Point 7 8 buttons to adjust the tint value to get a proper color balance (from 0 to 63).

Color temp.

Use the Point 7 8 buttons to select the desired Color temp.

level (High, Mid, Low, or XLow).

White balance (Red)

Press the Point 7 button to lighten red tone; press the

Point 8 button to deepen red tone (from 0 to 63).

White balance (Green)

Press the Point 7 button to lighten green tone; press the

Point 8 button to deepen green tone (from 0 to 63).

White balance (Blue)

Press the Point 7 button to lighten blue tone; press the

Point 8 button to deepen blue tone (from 0 to 63).

✔

Notes:

•When the White balance Red, Green, or Blue is adjusted, the Color temp. level will change to “Adj.”.

•Tint cannot be selected when the video system is PAL, SECAM,

PAL-M, or PAL-N (p.40).


Image Adjust Menu icon

Move the red frame pointer to the desired item and then press the SELECT button.

Use the Point 7 8 buttons to adjust the setting value.

Press the SELECT button at this item to display other items.

Press the SELECT button here to display the previous items.

42

Video Input

Sharpness

Press the Point 7 button to decrease the sharpness of the image; press the Point 8 button to increase the sharpness of the image (from 0 to 15).

Gamma

Use the Point 7 8 buttons to adjust the gamma value to obtain a better balance of contrast (from 0 to 15).

Noise reduction

Noise interference on the screen can be reduced. Select one of the following options to get smoother images.

Off.......... Disabled.

L1........... Lower reduction

L2........... Higher reduction

Progressive

An interlaced video signal can be displayed in progressive mode. Select one of the following options.

Off.......... Disabled.

L1........... For an active picture.

L2........... For a still picture.

Film ........ For watching a film. With this function, the projector reproduces pictures faithful to the original film quality.

Reset




Store

To store the adjusted data, select Store and press the

SELECT button. Use the Point ed buttons to select one from Image 1 to 4 and press the SELECT button.

A confirmation box appears and then select [Yes]. Stored data can be called up by selecting an “Image (1–4)” in the

Image Select Menu on page 41.

Quit

Exit the Image Adjust Menu.

✔

Notes:

•Noise reduction and Progressive cannot be selected when 480p,

575p, 720p, 1035i, or 1080i is selected (p.40).

•Reset and Store icons will be displayed when any adjustment is made.

Store icon

Image Mode Menu

Move the red frame pointer to an image item to be set and then press the

SELECT button.

A confirmation box appears and then select [Yes].

43

Video Input

Screen Size Adjustment

This projector has the picture screen resize function, which enables you to customize the image size.

Screen Menu

1

2


Menu. Use the Point 7 8 buttons to move the red frame pointer to the Screen Menu icon.

Use the Point ed buttons to move the red frame pointer to the desired function and then press the

SELECT button.

Normal

Provide the image at the 4:3 normal video aspect ratio.

Wide

Provide the image at the 16:9 wide screen ratio.

Screen Menu icon

Move the red frame pointer to the desired function and press the

SELECT button.

✔

Note:

•Screen Menu cannot be operated when 720p, 1035i, or 1080i is selected in the AV System Menu (p40).

44

Setting

Setting

This projector has a Setting menu that allows you to set up the other various functions described below.


Menu. Use the Point 7 8 buttons to move the red frame pointer to the Setting Menu icon.

2 Use the Point ed buttons to move the red frame pointer to the desired item and then press the SELECT button. The Setting dialog box appears.

Language

The language used in the On-Screen Menu is available in

English, German, French, Italian, Spanish, Portuguese,

Dutch, Swedish, Finnish, Polish, Hungarian, Romanian,

Russian, Chinese, Korean, and Japanese.

Auto setup

This function enables Auto Keystone correction and Auto

PC adjustment by pressing the AUTO SETUP button on the top control or the AUTO SET button on the remote control.

Settings for those functions can be altered as follows:

Auto PC Adj.

On . . . . . .Enables Auto PC Adjustment when pressing the AUTO SET button on the remote control or the AUTO SETUP button on the top control.

Off . . . . . .Disables Auto PC Adjustment.

Auto Keystone

Auto . . . . . Always works and corrects keystone distortion according to the projector's tilt.

Manual . . .Works only when pressing the AUTO SET button on the remote control or the AUTO

SETUP button on the top control.

Off . . . . . .Disables Auto Keystone.

✔

Notes:

•Auto PC Adj. and Auto Keystone cannot be set "Off" at the same time.

•Auto Keystone corrects vertical distortion only, not correct horizontal distortion.

•The Auto Keystone cannot work when Ceiling feature is On in the

Setting menu (p.49).

•Perfect correction of the image distortion cannot be ensured with the Auto setup function. If the distortion is not corrected properly by pressing the AUTO SETUP/AUTO SET button, adjust manually by pressing the KEYSTONE button on the remote control or selecting Keystone in the Setting menu (pp.26, 46).


Setting Menu (Language)

Set the red frame pointer to the item and press the

SELECT button.

Setting Menu icon


Language, then the

Language Menu appears.

Auto setup

Press the SELECT button here to display the other languages.

Select Auto setup and this box appears. Choose the desired setting for Auto keystone and Auto PC adj.

with the Point 7 8 buttons.

45

Setting

Keystone

This function is used to store or reset the keystone correction when the AC power cord is unplugged. Use the

Point 7 8 buttons to switch between each option.

Store ........ Keep the keystone correction even when the

AC power cord is unplugged.

Reset ....... Release the keystone correction when the AC power cord is unplugged.

To correct keystone distortion, press the SELECT button.

The “Keystone” appears on the screen. Use the Point ed buttons to correct keystone distortion (p.26).

Blue back

When this function is “On,” a blue image is displayed while the input signal is not detected.

Keystone

Display

This function decides whether to display On-Screen Displays.

On ............................ Show all the On-Screen displays. Use this function when you want to project images after the lamp becomes bright enough. The factory default setting is in this option.

Countdown Off ........ Show the input image instead of the countdown when turning on the projector. Use this function when you want to project the image as early as possible even when the lamp is not bright enough.

Off ............................ Hide the On-Screen Displays except;

●On-Screen Menu

●“Power off?” (p.22)

●“No signal” for Power management

(p.50)

●“Please wait ...”

●White arrows for the True function in the Screen Menu (p.36)

Use the Point 7 8 buttons to switch between the options.

46

Logo (Logo and Logo PIN code lock settings)

This function allows you to customize the screen logo with

Logo select, Capture, and Logo PIN code lock functions.

✔

Note:

•When “On” is selected in the Logo PIN code lock function, Logo select and Capture functions cannot be selected.

Logo select

Logo select

This function decides on the starting-up display from among following options.

User ......... Show the image you captured

Default ..... Show the factory-set logo

Off............ Show the countdown display only

Capture

This function enables you to capture an image being projected to use it for a starting-up display or interval of presentations.

Select Capture and press the SELECT button.

A confirmation box appears and select [Yes] to capture the projected image.

After capturing the projected image, go to the Logo select function and set it to “User”. Then the captured image will be displayed the next time you turn on the projector or when you press the NO SHOW button (see page 27).

To cancel the Capture function, select [No].

✔

Notes:

•Before capturing an image, select “Standard” in the Image

Select Menu to capture a proper image (pp.34, 41).

•A signal from a computer can be captured up to XGA (1024 x

768). A signal from video equipment can be captured except for 720p, 1035i, and 1080i.

•When capturing the image that has been adjusted by the

Keystone function, the adjusted data is automatically reset and the projector captures an image without keystone correction.

•When the Logo PIN code lock function is set to “On,” the

Capture function cannot be selected.

•When starting to capture a new image, the previously stored image is cleared even if you cancel the capturing.

Capture

Select [Yes] to capture the projected image.

Select [Yes] to stop capturing.

Setting

47

Setting

48

Logo PIN code lock

This function prevents an unauthorized person from changing the screen logo.

Off............ The screen logo can be changed freely from the Logo Menu (p.47).

On ............ The screen logo cannot be changed without a Logo PIN code.

If you want to change the Logo PIN code lock setting, press the SELECT button and the Logo PIN code dialog box appears. Enter a Logo PIN code by following the steps below. The initial Logo PIN code is set to “4321” at the factory.

Enter a Logo PIN code

Use the Point ed buttons to enter a number. Press the

Point 8 button to fix the number and move the red frame pointer to the next box. The number changes to “

✳.” If you fixed an incorrect number, use the Point 7 button to move the pointer to the number you want to correct, and then enter the correct number.




If you entered an incorrect Logo PIN code, “Logo PIN code” and the number (

✳✳✳✳) will turn red for a moment.

Enter the correct Logo PIN code all over again.

Change the Logo PIN code lock setting

Use the Point 7 8 buttons to switch On/Off, and then press the Point d button to move the pointer to “Quit.”

Press the SELECT button to close the dialog box.

Change the Logo PIN code

Logo PIN code can be changed to your desired four-digit number. Press the Point d button to select “Logo PIN code change” and then press the SELECT button. The

New Logo PIN code input dialog box appears. Set a new

Logo PIN code.

Be sure to note the new Logo PIN code and keep it at hand. If you lost the number, you could no longer change the Logo PIN code setting. For details on PIN code setting, refer to “PIN code lock” on pages 52–53.

Logo PIN code lock

Enter a Logo PIN code

After a correct Logo PIN code is entered, the following dialog box appears.

Change the Logo PIN code lock setting

Use the Point 7 8 buttons to switch On/Off.

Change the Logo PIN code

CAUTION:

WHEN YOU HAVE CHANGED THE LOGO PIN

CODE, WRITE DOWN THE NEW PIN CODE IN

COLUMN OF THE LOGO PIN CODE NO.

MEMO ON PAGE 72, AND KEEP IT

SECURELY. SHOULD THE LOGO PIN CODE

BE LOST OR FORGOTTEN, THE LOGO PIN

CODE SETTING CAN NO LONGER BE

CHANGED.

Setting

Ceiling

When this function is set to “On,” the picture will be top/bottom and left/right reversed. This function is used to project the image from a ceiling-mounted projector.

Ceiling

Rear

When this function is set to “On,” the picture will be left/right reversed. This function is used to project the image from rear of the screen.

Terminal

The COMPUTER IN 2 / COMPONENT IN / MONITOR OUT terminal on the back of the projector is switchable for computer input or monitor output. (See page 10) Select

Computer 2 or Monitor Out with the Point 78 buttons.

Computer 2 ........computer input

Monitor Out .......monitor out

Terminal function is not available when selecting Computer

2 to the input source. Change the input source to the others (Computer1 or Video) so that the Terminal function will be available. (pp.28, 29, 38, 39)

Rear

Input search

This function detects the input signal automatically. When a signal is found, the search will stop. Use the Point 7 8 buttons to select one of the following options.

Off.......... Input search will not work.

On1 ........ Input search works under the following situation.

– When pressing the INPUT button on the top control.

– When pressing the COMPUTER button or

VIDEO button on the remote control.

On2 ........ Input search works under the following situation.

– When turning on the projector by pressing the

POWER ON-OFF button on the top control or the remote control.

– When pressing the COMPUTER button or

VIDEO button on the remote control.

– When pressing the INPUT button on the top control.

– When the current input signal is cut off.*

*If the No show or Freeze function is active, cancel it to activate the Input search. It is also unavailable when On-

Screen menu is displayed.

✔

Notes:

•While Input search is set to “On1” or “On2,” the status of Input and Lamp are displayed every time the signal is switched.

•Only the last selected input source can be detected.

•If the INPUT button on the top control or COMPUTER or VIDEO buttons on the remote control is pressed during Input search is in progress, Input search will stop and go back to the previous input signal.

49

Setting

Standby mode

This function is available when operating the projector via network.

Normal ....... Supply the power to the network function even after turning off the projector. You can turn on/off the projector via network, modify network environment, and receive an e-mail about projector status while the projector is powered off.

Eco ............. Select “Eco” when you do not use the projector via network. The projector’s network function will stop when turning off the projector.

Refer to the owner’s manual “Network Set-up and

Operation”.

✔

Note:

•When selecting Normal, the cooling fans may be running depending on the temperature inside the projector even if the projector is turned off.

Power management

For reducing power consumption as well as maintaining the lamp life, the Power management function turns off the projection lamp when the projector is not operated for a certain period.

If the input signal is interrupted and no button is pressed for more than 30 seconds, the timer display with “No signal” appears. It starts the countdown until the lamp is turned off.

Use the Point 7 8 buttons to set the countdown timer.

Select one of the following options:

Ready ................... When the lamp has been fully cooled down, the POWER indicator changes to green blinking. In this condition, the projection lamp will be turned on if the input signal is reconnected or any button on the top control or remote control is pressed.

Shut down............ When the lamp has been fully cooled down, the power will be turned off.

Off ........................ Power management function is off.

Power management

Time left before Lamp is off.


Power management and this dialog box appears. Use the

Point 7 8 buttons to choose one of the three options.

Press the Point d button to select the timer, and then use the Point 7 8 buttons to set timer.

50

Setting

On start

When this function is set to “On,” the projector will be automatically turned on just by connecting the AC power cord to a wall outlet.

✔

Note:

•Be sure to turn off the projector properly (see “Turning Off the

Projector” on page 22). If the projector is turned off in the incorrect sequence, the On start function does not work properly.

Lamp control

This function allows you to change brightness of the screen.

Normal ....Normal brightness

Auto ........The brightness according to the input signal

Eco ..........Lower brightness reduces the lamp power consumption and extends the lamp life.

Pointer

Pointer

You can emphasize a part of the projected image with this function. Use the Point ed buttons to choose either

Spotlight or Pointer and press the SELECT button. Then use the Point 7 8 buttons to select a size of the Spotlight

(Large, Middle, or Small) or a pattern of the Pointer (Arrow,

Finger, or Dot). See “Pointer Function” on page 13.

Remote control

The eight different remote control codes (Code 1–Code 8) are assigned to the projector; the factory-set, initial code

(Code 1) and the other seven codes (Code 2 to Code 8).

The same code should set on both the projector and the remote control. For example, operating the projector in

“Code 7”, the remote control code also must be switched to “Code 7”.

To change the code for the projector

Select a remote control code in this Setting Menu.

To change the code for the remote control:

While holing down the MENU button, press the IMAGE button the number of times corresponding to the remote control code for the projector. See “Remote Control

Code” on page 14.

Remote control

Use the Point ed buttons to choose either Spotlight or Pointer, and then use the Point 7 8 buttons to switch between the options.

51

Setting

Security (Key lock and PIN code lock settings)

This function allows you to use the Key lock and PIN code lock function to set the security for the projector operation.

Key lock

Key lock

This function locks the top control and remote control buttons to prevent operation by unauthorized persons.

...... Unlocked.

...... Lock the operation of the top control. To unlock, use the remote control.

...... lock the operation of the remote control.

To unlock, use the top control.

If the top control accidentally becomes locked and you do not have the remote control nearby or there is something wrong with your remote control, contact the dealer where you purchased the projector or the service center.

Select Key lock. Use the Point ed buttons to choose one of the options and select [Yes] to activate it.

PIN code lock

This function prevents the projector from being operated by unauthorized persons and provides the following setting options for security.

Off............ Unlocked.

On1 .......... Enter the PIN code every time turning on the projector.

On2 .......... Enter the PIN code to operate the projector once the power cord is disconnected; as long as the AC power cord is connected, the projector can be operated without a PIN code.

Whenever you change the PIN code lock setting or the

PIN code (the four-digit number), you are required to enter the PIN code. The “1234” is set as the initial PIN code at the factory.

If you want to change the PIN code lock setting, Press the SELECT button and the PIN code dialog box appears.

PIN code lock

When the projector is locked with a PIN code, the PIN code lock symbol appears on the menu bar.

52

Setting

Enter a PIN code

Use the Point ed buttons to enter a number. Press the

Point 8 button to fix the number and move the red frame pointer to the next box. The number changes to “

✳.” If you fixed an incorrect number, use the Point 7 button to move the pointer to the number you want to correct, and then enter the correct number.




If you entered an incorrect PIN code, “PIN code” and the number (

✳✳✳✳) will turn red for a moment. Enter the correct PIN code all over again.

Change the PIN code lock setting

Use the Point 7 8 buttons to select Off, On1, or On2 and then move the pointer to “Quit” with the Point d button.

Press the SELECT button to close the dialog box.

Enter a PIN code

After a correct PIN code is entered, the following dialog box appears.

Change the PIN code lock setting

Use the Point 7 8 buttons to switch between the options.

Change the PIN code

The PIN code can be changed to your desired four-digit number. Press the Point d button to select “PIN code change” and press the SELECT button. The New PIN code input dialog box appears. Set a new PIN code.

CAUTION:

WHEN YOU HAVE CHANGED THE PIN CODE, WRITE

DOWN THE NEW PIN CODE IN COLUMN OF THE PIN

CODE NO. MEMO ON PAGE 72, AND KEEP IT

SECURELY. IF YOU FORGET YOUR PIN CODE, THE

PROJECTOR CAN NO LONGER BE STARTED.

Change the PIN code

53

Setting

54

Fan

This function provides the following options in the cooling fans’ operation when the projector is turned off (p.22).

L1....... Normal operation

L2....... Slower and lower-sound than the normal operation

(L1), but it takes more time to cool the projector down.

Fan control

Choose the running speed of cooling fans from the following options.

Normal ..... Normal speed

Max .......... Faster than the normal speed.

Warning log

This function records anomalous operations while the projector is in operation and use it when diagnosing faults.

Up to 10 warning logs are displayed with the latest warning message at the top of the list, followed by previous warning messages in chronological order.

✔

Note:

•When the Factory default function is executed, all the warning log records will be deleted.

Lamp counter

This function is used to reset the lamp counter.

When the lamp life is left less than 100 hours, the Lamp replacement icon (Fig.1) will appear on the screen, indicating that the end of lamp life is approaching.

When the lamp life is left 0 hour, the Lamp replacement icon (Fig.2) will appear on the screen, indicating that the end of lamp life is reached.

When replacing the projection lamp, reset the lamp counter.

See "Resetting the Lamp Counter" on page 59.

✔

Note:

•The Lamp replacement icons (Fig.1 and Fig.2) will not appear when the Display function is set to “Off” (p.46), during “Freeze”

(p.27), or “No show” (p.27).

Fan

Fig.1 Lamp replacement icon

This icon appears on the screen when the end of lamp life is approaching.

✔

Note:

•This icon also appears at turning on and selecting input source.

Fig.2 Lamp replacement icon

This icon appears on the screen when the end of lamp life is reached.

✔

Note:

•At turning on, the icon (Fig.2) will appear.

At selecting input source, the icon (Fig.1) will appear.

Setting

Filter counter

This function is used to set a frequency for the filter cleaning.

When the projector reached a specified time between cleanings, a Filter warning icon appears on the screen, notifying the cleaning is necessary. After cleaning the filter, be sure to select RESET and set the timer. The Filter warning icon will not turn off until the filter counter is reset.

For details about resetting the timer, refer to “Resetting the

Filter Counter” on page 57.

Filter counter

Use the Point 7 8 buttons to set the timer. Select from (Off/100H/ 200H/

300H) depending on the use environment.

Fig.3 Filter warning icon

Factory default

This function returns all setting values except for the user logo, PIN code lock, Logo PIN code lock, lamp counter, and filter counter to the factory default settings.

Quit

Exit the Setting Menu.

Filter warning icon appears on the screen at a set time.

✔

Note:

•This icon also appears at turning on..

Fig.4 Filter warning icon

✔

Notes:

•At selecting input source, the icon (Fig.4) will appear..

•The Filter warning icons (Fig.3 and Fig.4) will not appear when the Display function is set to “Off”

(p.46), during “Freeze”(p.27), or "No show"

(p.27).

Factory default

Select Factory default and this box appears. Select [Yes], and the next box appears.

Select [Yes] to activate it.

55

Maintenance and Cleaning

Warning Indicator

The WARNING indicator shows the state of the function which protects the projector. Check the state of the

WARNING indicator and the POWER indicator to take proper maintenance.

The projector is shut down and the WARNING indicator is blinking red.

When the temperature inside the projector reaches a certain level, the projector will be automatically shut down to protect the inside of the projector. The POWER indicator is blinking while the projector is being cooled down. When the projector has cooled down enough (to its normal operating temperature), it can be turned on again by pressing the POWER ON-OFF button.

✔

Note:

•The WARNING indicator continues to blink even after the temperature inside the projector returns to normal. When the projector is turned on again, the WARNING indicator stops blinking.

Top Control

ON

-

OFF

POWER

MENU


INPUT

AUT

O SET

UP

SELECT

- VOLU

ME

+ VOLUME

WARNING blinking red

Then check the matters below:

– Did you provide appropriate space for the projector to be ventilated? Check the installing condition to see if the air vents of the projector are not blocked.

– Has the projector been installed near an Air-Conditioning/

Heating Duct or Vent? Move the installation of the projector away from the duct or vent.

– Is the filter clean? Clean the filter periodically.

The projector is shut down and the WARNING indicator lights red.

When the projector detects an abnormal condition, it is automatically shut down to protect the inside of the projector and the WARNING indicator lights red. In this case, unplug the AC power cord and reconnect it, and then turn the projector on once again to verify operation. If the projector cannot be turned on and the WARNING indicator still lights red, unplug the AC power cord and contact the service station.

CAUTION

DO NOT LEAVE THE PROJECTOR WITH THE AC

POWER CORD CONNECTED UNDER AN

ABNORMAL CONDITION. IT MAY RESULT IN

FIRE OR ELECTRIC SHOCK.

Top Control

ON

-

OFF

POWER

MENU


INPUT

AUT

O SET

UP

SELECT

+ VOLUME

- VOLU

ME

WARNING emit a red light

56


Cleaning the Filter

Filters prevent dust from accumulating on the optical elements inside the projector. Should the filters become clogged with dust particles, it will reduce cooling fans’ effectiveness and may result in internal heat buildup and adversely affect the life of the projector. If a “Filter warning” icon appears on the screen, clean the filters immediately. Clean the filters by following the steps below.

1

2

3

4

Turn off the projector, and unplug the AC power cord from the AC outlet.

Turn the projector over and remove the filters by pulling the latches upward.

Gently clean the filters by using a brush or rinse them softly.

When rinsing the filters, dry them well. Replace the filters properly. Make sure that the filters are fully inserted to the projector.

CAUTION

Do not operate the projector with the filters removed. Dust may accumulate on the optical elements degrading picture quality.

Do not put anything into the air vents. Doing so may result in malfunction of the projector.

RECOMMENDATION

We recommend avoiding dusty/smoky environments when you operate the projector. Usage in these environments may cause poor image quality.

When using the projector under dusty or smoky conditions, dust may accumulate on a lens, LCD panels, or optical elements inside the projector degrading the quality of a projected image. When the symptoms above are noticed, contact your authorized dealer or service station for proper cleaning.

Resetting the Filter Counter

Filters

Pull up and remove.

✔

Note:

•When reinserting these filters, be sure that the slit part is facing the outer side.

Be sure to reset the Filter counter after cleaning or replacing the filters.

Filter counter

1

2

3



Use the Point ed buttons to move the red frame pointer to Filter counter and then press the SELECT button. A dialog box appears showing the total accumulated time of the filter use, a timer setting option, and the reset option. Select Reset and the

“Filter counter Reset?” appears. Select [Yes] to continue.

Another confirmation dialog box appears, select [Yes] to reset the Filter counter.

Select Reset and the “Filter counter Reset?” appears.

Select [Yes], then another confirmation box appears.

Select [Yes] again to reset the Filter counter.

57


Lamp Replacement

When the projection lamp of the projector reaches its end of life, the Lamp replacement icon appears on the screen and

LAMP REPLACE indicator lights yellow. Replace the lamp with a new one promptly. The timing when the LAMP REPLACE indicator should light is depending on the lamp mode.

Top Control

ON

-

OFF

POWER

MENU


INPUT

AUT

O SET

UP

SELECT

WARNING:

TURN OFF THE UV LAMP BEFORE

OPENING THE LAMP COVER

Lamp replacement icon

LAMP REPLACE indicator

CAUTION

Allow a projector to cool for at least 45 minutes before you open the Lamp cover. The inside of the projector can become very hot.

Follow these steps to replace the lamp.

1

2

Turn off the projector and unplug the AC power cord.

Let the projector cool for at least 45 minutes.

Remove the screw with a screwdriver, and remove the lamp cover.

3

4

5

Remove the two (2) screws that secure the lamp. Lift the lamp out of the projector by using the handle.

Replace the lamp with a new one and secure the two

(2) screws. Make sure that the lamp is set properly.

Close the lamp cover.

Connect the AC power cord to the projector and turn on the projector.

6 Reset the lamp counter.

See “Resetting the Lamp Counter” on the next page.

CAUTION

For continued safety, replace with a lamp of the same type. Do not drop a lamp or touch a glass bulb! The glass can shatter and may cause injury.

Screw Lamp Cover

Screw

Handle Screw

Lamp

ORDER REPLACEMENT LAMP

Replacement lamp can be ordered through your dealer. When ordering a projection lamp, give the following information to the dealer.

●

●

Model No. of your projector

Replacement Lamp Type No.

: LC-XB29N

: POA-LMP106

(Service Parts No. 610 332 3855)

58


Resetting the Lamp Counter

Be sure to reset the Lamp counter after the lamp is replaced. When the Lamp counter is reset, the LAMP

REPLACE indicator stops lighting and the Lamp replacement icon disappears.

1

2

3



Use the Point ed buttons to move the red frame pointer to Lamp counter and then press the SELECT button. A dialog box appears showing the total accumulated time of the lamp usage and the reset option. Select Reset and the “Lamp replacement counter Reset?” appears. Select [Yes] to continue.

Another confirmation dialog box appears, select [Yes] to reset the Lamp counter.

Select Reset and the “Lamp replacement counter

Reset?” appears.

✔

Note:

•Do not reset the Lamp counter without implementing lamp replacement. Be sure to reset the Lamp counter only after replacing the lamp.

Select [Yes], then another confirmation box appears.

Select [Yes] again to reset the

Lamp counter.

LAMP HANDLING PRECAUTIONS

This projector uses a high-pressure lamp which must be handled carefully and properly.

Improper handling may result in accidents, injury, or create a fire hazard.

● Lamp life may differ from lamp to lamp and according to the environment of use. There is no guarantee of the same life for each lamp. Some lamps may fail or terminate their life in a shorter period of time than other similar lamps.

● If the projector indicates that the lamp should be replaced, i.e., if the LAMP REPLACE indicator lights up, replace the lamp with a new one IMMEDIATELY after the projector has cooled down.

(Follow carefully the instructions in the Lamp Replacement section of this manual.) Continuous use of the lamp with the LAMP REPLACE indicator lighted may increase the risk of lamp explosion.

● A Lamp may explode as a result of vibration, shock or degradation as a result of hours of use as its lifetime draws to an end. Risk of explosion may differ according to the environment or conditions in which the projector and lamp are being used.

IF A LAMP EXPLODES, THE FOLLOWING SAFETY PRECAUTIONS SHOULD BE TAKEN.

If a lamp explodes, disconnect the projector’s AC plug from the AC outlet immediately. Contact an authorized service station for a checkup of the unit and replacement of the lamp. Additionally, check carefully to ensure that there are no broken shards or pieces of glass around the projector or coming out from the cooling air circulation holes. Any broken shards found should be cleaned up carefully. No one should check the inside of the projector except those who are authorized trained technicians and who are familiar with projector service. Inappropriate attempts to service the unit by anyone, especially those who are not appropriately trained to do so, may result in an accident or injury caused by pieces of broken glass.

59


Attaching the Lens Cover

When moving this projector or while not using it over an extended period of time, replace the lens cover.

Attach the lens cover according to the following procedures.

1 Pass the string through a hole of the lens cover.

2 Turn over the projector and remove the screw with a screwdriver.

3 Attach the string with lens cover to a hole at the bottom of the projector and secure it with a screw.

Cleaning the Projection Lens

Unplug the AC power cord before cleaning.

Gently wipe the projection lens with a cleaning cloth that contains a small amount of non-abrasive camera lens cleaner, or use a lens cleaning paper or commercially available air blower to clean the lens.

Avoid using an excessive amount of cleaner. Abrasive cleaners, solvents, or other harsh chemicals might scratch the surface of the lens.

60

Cleaning the Projector Cabinet

Unplug the AC power cord before cleaning.

Gently wipe the projector body with a soft dry cleaning cloth. When the cabinet is heavily soiled, use a small amount of mild detergent and finish with a soft dry cleaning cloth. Avoid using an excessive amount of cleaner. Abrasive cleaners, solvents, or other harsh chemicals might scratch the surface of the cabinet.

When the projector is not in use, put the projector in an appropriate carrying case to protect it from dust and scratches.

Hole

Lens Cover

String for the lens cover

Secure it to the hole with a screw.

Appendix

Indicators and Projector Condition

Check the indicators for projector condition.

Indicators

POWER red/green

WARNING red

LAMP

REPLACE yellow

Projector Condition

The projector is off. (The AC power cord is unplugged.)

✽

The projector is in stand-by mode. Press the POWER ON-OFF button to turn on the projector.

✽

✽

✽

✽

✽

The projector is operating normally.

The temperature inside the projector is abnormally high. The projector cannot be turned on. When the projector is cooled down enough and the temperature returns to normal, the POWER indicator stops blinking and the projector can be turned on. (The

WARNING indicator keeps blinking.) Check and clean the filter.

The projector has been cooled down enough and the temperature returns to normal. When turning on the projector, the WARNING indicator stops blinking. Check and clean the air filter.

The projector is preparing for stand-by or the projection lamp is being cooled down. The projector cannot be turned on until cooling is completed and the POWER indicator stops blinking.

The projector detects an abnormal condition and cannot be turned on. Unplug the AC power cord and plug it again to turn on the projector. If the projector is turned off again, unplug the AC power cord and contact the dealer or the service center for service and checkup. Do not leave the projector on. It may cause an electric shock or a fire hazard.

✽

The projector is in the Power management mode.

✽

The projector’s Network or Memory viewer function is in an abnormal condition.

• • • green.

• • • red • • • off

• • • blinks green.

• • • blinks red.

When the projection lamp reaches its end of life, the LAMP REPLACE indicator lights yellow. When this indicator lights yellow, replace the projection lamp with a new one promptly. Reset the lamp replacement counter after replacing the lamp. See pages 58-59.

61

Appendix

Troubleshooting

Before calling your dealer or service center for assistance, check the items below once again.

–Make sure you have properly connected the projector to peripheral equipment as described on pages 17–19.

–Make sure all equipment is connected to AC outlet and the power is turned on.

–When the projector does not project an image from the connected computer, restart the computer.

Problem:

No power

Image is out of focus.

No image

Image is Left/Right reversed.

Image is Top/Bottom reversed.

No sound

– Solutions

– Plug the power cord of the projector into the AC outlet.

– See if the POWER indicator lights red.

– Wait until the POWER indicator stops blinking to turn on the projector again. The projector can be turned on after the POWER indicator turns red. See page 21.

– Check the WARNING indicator. If the WARNING indicator lights red, projector cannot be turned on. See page 56.

– Check the projection lamp. See page 58.

– Unlock the Key lock function for the projector. See page 52.

– Adjust focus of the projector. See page 25.

– Provide proper distance between the projector and the projection screen. See page 16.

– Check the projection lens to see if it needs cleaning. See page 60.

– Moving the projector from a cool to warm place may result in moisture condensation on the projection lens. In such cases, leave the projector off and wait until condensation evaporates.

– Check the connection between your computer or video equipment and the projector. See pages 17-19.

– See if the input signal is correctly output from your computer. Some laptop computers may need to change the setting for monitor output when connecting to a projector. See your computer’s instruction manual for the setting.

– It takes about 30 seconds to display an image after turning on the projector. See page 21.

– See if the selected system is corresponding with your computer or video equipment. See pages 30, 40.

– Select correct input source once again through menu operation. See pages 28-29, 38-39.

– Make sure the temperature is not out of the specified Operating

Temperature ( 41˚F–95˚F [5˚C–35˚C]) .

– Check the Ceiling/Rear function. See page 49.

– Check the Ceiling function. See page 49.

– Check the audio cable connection from audio input source.

– Adjust the audio source.

– Press the Volume + button. See page 25.

– Press the Mute button. See page 25.

62

Appendix

Some displays are not seen during the operation.

PIN code dialog box appears at start-up.

Computer 2 cannot be selected.

The Terminal function cannot be selected.

The Remote Control does not work.

– Check the Display function. See page 46.

– PIN code lock is being set. Enter a PIN code (the “1234” or numbers you have set). See pages 21, 52–53.

– Select Computer 2 at the Terminal function. (See page 49.)

– The Terminal function cannot be selected after Computer 2 is selected. Select other input source such as Computer 1 or

Video with the INPUT button on the top control, the

COMPUTER button or the VIDEO button on the remote control so that the Terminal function can be selected.

– Check the batteries.

– Make sure no obstruction is between the projector and remote control.

– Make sure you are not too far from the projector when using the remote control. Maximum operating range is 16.4’ (5 m).

– Make sure the code of the remote control is conformed to the projector’s code. See page 51.

– Unlock the Key lock function for the remote control function. See page 52.

– Check RESET/ON/ALL-OFF switch on the remote control is set to

“ON”. See page 12.

WARNING :

High voltages are used to operate this projector. Do not attempt to open the cabinet.

If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the service center. Specify the model number and explain about the problem. We will advise you how to obtain service.

The CE Mark is a Directive conformity mark of the European

Community (EC).

This symbol on the nameplate means the product is Listed by Underwriters Laboratories Inc. It is designed and manufactured to meet rigid U.L.

safety standards against risk of fire, casualty and electrical hazards.

63

Appendix

Menu Tree

Computer Input/Video Input

Input Computer 1 (Analog)

Computer 1 (Digital)

Computer 2

Video

Wired

Wireless*

Memory Viewer*

Sound

Sound Volume

Mute

Quit

Computer Input

System

(1)

SVGA 1

Mode 1

Mode 2

- - - -

✽Systems displayed in the System Menu vary depending on an input signal.

0–63

On/Off

RGB (PC digital)

RGB (AV HDCP)

Quit

RGB

Component

RGB (Scart)

Quit

Auto

Video

S-video

Quit

PC Adjust Auto PC Adj.

Fine sync

Total dots

Horizontal

Vertical

Current mode

Clamp

Display area H

Display area V

Reset

Mode free

Store

Quit

0–31

H-sync freq.

V-sync freq.

Quit

Yes/No

Mode 1

Mode 2

Mode 3

Mode 4

Mode 5

Quit

Mode 1

Mode 2

Mode 3

Mode 4

Mode 5

Quit

Go to System

(1)

N/A

N/A

Go to System

(1)

Go to System

(2)

N/A

Go to System

(3)

Go to System

(3)

Go to System

(3)

See owner’s manual “Network Set-up and Operation”

See owner’s manual “Network Set-up and Operation”

See owner’s manual of Memory viewer (optionally available)

N/A ........not applicable

*

............The menu will be displayed when connecting device for the input source.

Image Select

Image Adjust

Screen

Dynamic

Standard

Real

Blackboard (Green)

Image 1

Image 2

Image 3

Image 4

Contrast

Brightness

Color temp.

Red

Green

Blue

Sharpness

Gamma

Reset

Store

Quit

0–63

0–63

High

Mid

Low

XLow

Adj.

0–63

0–63

0–63

0–15

0–15

Yes/No

Image 1

Image 2

Image 3

Image 4

Quit

Normal

True

Wide

Full screen

Digital zoom +

Digital zoom –

64

Video Input

System

(2)

Screen

System

(3)

Image Select

Image Adjust

Dynamic

Standard

Cinema

Blackboard (Green)

Image 1

Image 2

Image 3

Image 4

Contrast

Brightness

Color

Tint

Color temp.

Red

Green

Blue

Sharpness

Gamma

Noise reduction

Progressive

Reset

Store

Quit

Auto

1080i

1035i

720p

575p

480p

575i

480i

Auto

PAL

SECAM

NTSC

NTSC 4.43

PAL-M

PAL-N

0–63

0–63

0–63

0–15

0–15

Off

L1

L2

Off

L1

L2

Film

Yes/No

Image 1

Image 2

Image 3

Image 4

Quit

0–63

0–63

0–63

0–63

High

Mid

Low

XLow

Adj.

Setting

Setting Language

Auto setup

16 languages provided.

Quit

Auto PC adj.

On/Off

Auto keystone

Auto

Manual

Store/Reset

Off

Keystone

Blue back

Display

Logo

On/Off

On/Countdown off/Off

Logo select

Off

Default

User

Capture

Yes/No

Logo PIN code lock

Logo PIN code entry

Off/On

Logo PIN code change

Quit

Ceiling

Rear

Terminal

Input search

On start

Lamp control

Pointer

Remote control

Security

Quit

On/Off

On/Off

Computer 2/Monitor Out

Off/On1/On2

Standby mode

Power management

Eco/Normal

Off

Ready

Shut down

Timer (1–30 Min.)

Quit

On/Off

Normal/Auto/Eco

Spotlight/Pointer

Quit

Code 1–Code 8

Key lock

Fan

Fan control

Warning log

Lamp counter

Off

Projector

Remote control

Quit

PIN code lock

PIN code lock entry

Quit

L1/L2

Normal/Max

Off/On1/On2

PIN code change

Quit

Filter counter

Factory default

Quit

Hour(s)

Reset Yes/No

Quit

Hour(s)

Off/100H/200H/300H

Reset Yes/No

Quit

Yes/No

Normal

Wide

Appendix

65

Appendix

Compatible Computer Specifications

Basically this projector can accept the signal from all computers with the V-, H-Frequency mentioned below and less than 140 MHz of Dot Clock for analog signal and 110 MHz of Dot Clock for digital signal.

When selecting these modes, PC adjustment can be limited.

RESOLUTION

640 x 480

720 x 400

640 x 400

640 x 480

640 x 480

640 x 480

640 x 480

640 x 480

640 x 480

640 x 480

768 x 575

––––––––

––––––––

1024 x 768

1024 x 768

1024 x 768

1024 x 768

1024 x 768

1024 x 768

1024 x 768

1024 x 768

1024 x 768

1024 x 768

1024 x 768

1024 x 768

1024 x 768

1024 x 768

1024 x 768

1024 x 768

800 x 600

800 x 600

800 x 600

800 x 600

800 x 600

800 x 600

800 x 600

800 x 600

800 x 600

800 x 600

800 x 600

832 x 624

ON-SCREEN

DISPLAY

VGA 1

VGA 2

VGA 3

VGA 4

VGA 5

VGA 6

VGA 7

MAC LC13

MAC 13

480p

575p

480i

575i

SVGA 1

SVGA 2

SVGA 3

SVGA 4

SVGA 5

SVGA 6

SVGA 7

SVGA 8

SVGA 9

SVGA 10

SVGA 11

MAC 16

XGA 1

XGA 2

XGA 3

XGA 4

XGA 5

XGA 6

XGA 7

XGA 8

XGA 9

XGA 10

XGA 11

XGA 12

XGA 13

XGA 14

XGA 15

MAC 19

31.47

31.25

15.734

15.625

35.156

37.88

46.875

53.674

48.08

37.90

34.50

38.00

38.60

32.70

38.00

49.72

H-Freq.

(KHz)

31.47

31.47

31.47

37.86

37.86

37.50

43.269

34.97

35.00

48.36

68.677

60.023

56.476

60.31

48.50

44.00

63.48

36.00

62.04

61.00

35.522

46.90

47.00

58.03

60.24

60.00

84.997

75.03

70.07

74.92

60.02

54.58

79.35

87.17

(Interlace)

77.07

75.70

86.96

(Interlace)

58.20

58.30

72.00

75.08

72.19

61.03

55.38

60.51

60.31

51.09

60.51

74.55

V-Freq.

(Hz)

59.88

70.09

70.09

74.38

72.81

75.00

85.00

66.60

66.67

59.88

50.00

60.00

(Interlace)

50.00

(Interlace)

56.25

60.32

75.00

85.06

RESOLUTION

1400 x 1050

1400 x 1050

1400 x 1050

1152 x 870

1280 x 960

1280 x 1024

1366 x 768

1360 x 768

1376 x 768

1360 x 768

1366 x 768

1360 x 768

1376 x 768

1360 x 768

1600 x 1200

1600 x 1200

1600 x 1200

1600 x 1200

1280 x 720

1920 x 1035

1920 x 1080

1920 x 1080

1152 x 864

1280 x 1024

1280 x 1024

1280 x 1024

1280 x 1024

1280 x 1024

1280 x 1024

1280 x 1024

1280 x 1024

1280 x 960

1152 x 900

1152 x 900

1280 x 1024

1280 x 1024

1280 x 1024

1280 x 1024

1152 x 900

1280 x 1024

1280 x 1024

1280 x 1024

SXGA 13

SXGA 14

SXGA 15

SXGA 16

SXGA 17

SXGA 18

SXGA 19

SXGA 20

SXGA+ 1

SXGA+ 2

SXGA+ 3

MAC21

MAC

MAC

WXGA 1

ON-SCREEN

DISPLAY

SXGA 1

SXGA 2

SXGA 3

SXGA 4

SXGA 5

SXGA 6

SXGA 7

SXGA 8

SXGA 9

SXGA 10

SXGA 11

SXGA 12

WXGA 2

WXGA 3

WXGA 4

WXGA 6

WXGA 7

WXGA 8

WXGA 9

UXGA 1

UXGA 2

UXGA 3

UXGA 4

720p

1035i

1080i

1080i

60.01

72.00

66.00

86.70

(Interlace)

60.18

85.024

60.19

60.12

59.90

75.06

75.08

75.08

60.00

V-Freq.

(Hz)

70.40

58.60

60.00

59.98

60.01

67.19

76.107

60.02

75.025

60.00

65.20

75.60

86.00

(Interlace)

94.00

(Interlace)

60.00

60.00

72.00

60.00

60.00

60.00

72.00

60.00

65.00

70.00

75.00

60.00

60.00

(Interlace)

60.00

(Interlace)

50.00

(Interlace)

50.00

50.00

63.37

76.97

61.85

46.43

63.79

91.146

63.97

65.35

65.12

68.68

75.00

80.00

48.36

H-Freq.

(KHz)

64.20

62.50

63.90

63.34

63.74

71.69

81.13

63.98

79.976

60.00

61.20

71.40

47.70

48.36

56.16

48.36

47.70

48.36

56.16

75.00

81.25

87.5

93.75

45.00

33.75

33.75

28.125

66

Appendix

When the input signal is digital from DVI terminal, refer to the chart below.

ON-SCREEN

DISPLAY

D-VGA

D-480p

D-575p

D-SVGA

D-XGA

D-WXGA 1

D-WXGA 2

D-WXGA 3

D-WXGA 4

D-WXGA 5

D-WXGA 6

D-WXGA 7

D-WXGA 9

RESOLUTION

640 x 480

640 x 480

768 x 575

800 x 600

1024 x 768

1366 x 768

1360 x 768

1376 x 768

1360 x 768

1366 x 768

1280 x 768

1280 x 768

1280 x 800

H-Freq.

(KHz)

31.47

31.47

31.25

37.879

43.363

48.36

47.7

48.36

56.160

46.500

47.776

60.289

49.600

V-Freq.

(Hz)

59.94

59.88

50.00

60.32

60.00

60.00

60.00

60.00

72.000

50.000

59.870

74.893

60.050

ON-SCREEN

DISPLAY

D-SXGA1

D-SXGA2

D-SXGA3

D-720p

D-1035i

D-1080i

D-1080i

RESOLUTION

1280 x 1024

1280 x 1024

1400 x 1050

1280 x 720

1920 x 1035

1920 x 1080

1920 x 1080

H-Freq.

(KHz)

63.98

60.276

63.97

45.00

33.75

33.75

28.125

V-Freq.

(Hz)

60.02

58.069

60.19

60.00

60.00

(Interlace)

60.00

(Interlace)

50.00

(Interlace)

✔

Note:

•When the input signal is D-SXGA 1, D-SXGA 2, or D-SXGA 3, images may not be displayed properly depending on computers.

67

Appendix

Technical Specifications

Mechanical Information

Projector Type

Dimensions (W x H x D)

Net Weight

Feet Adjustment

Panel Resolution

LCD Panel System

Panel Resolution

Number of Pixels

Multi-media Projector

9.66" x 2.28" x.6.82" (294.5mm x 69.5mm x 208 mm) (Not including adjustable feet)

5.7 lbs (2.6 kg)

0˚ to 10.0˚

Signal Compatibility

Color System

High Definition TV Signal

Scanning Frequency

Optical Information

Projection Image Size (Diagonal)

Throw Distance

Projection Lens

Projection Lamp

PAL, SECAM, NTSC, NTSC4.43, PAL-M, and PAL-N

480i, 480p, 575i, 575p, 720p, 1035i, and 1080i

H-sync. 15 kHz–100 kHz, V-sync. 50–100 Hz

Adjustable from 40” to 300”

4.3’–51.6’ (1.1 m–13.1 m)

F1.6–2.5 lens with f17.7 mm–28.3 mm with manual zoom and focus

200 W

Interface

Video Input Jack

S-video Input Jack

Audio Input Jacks

Computer Input 1/DVI-I Input Terminal

RCA Type x 1

Mini DIN 4 pin x 1

RCA Type x 2

DVI-I Terminal X 1

Computer Input 2/Monitor Output Terminal Analog RGB (Mini D-sub 15 pin) Terminal x 1 (In/Out switchable)

Computer/Component Audio Input Jack Mini Jack (stereo) x 1

Service Port Connector

USB Connector

Mini DIN 8 pin x 1

USB Series A connector x 1/USB Series B connector x 1

Audio Output Jack

LAN Connection Terminal

Mini Jack (stereo) x 1 (variable)

100 Base-TX (100Mbps)/10 Base-T (10Mbps), RJ45

Audio

Internal Audio Amp

Built-in Speaker

Power

Voltage and Power Consumption

0.63” TFT Active Matrix type, 3 panels

1,024 x 768 dots

2,359,296 (1,024 x 768 x 3 panels)

1.0 W RMS

1 speaker, ø1.1” (28 mm)

AC 100–120 V (3.2A Max. Ampere), 50/60 Hz (The U.S.A and Canada)

AC 200–240 V (1.6A Max. Ampere), 50/60 Hz (Continental Europe)

Operating Environment

Operating Temperature

Storage Temperature

Remote Control

Battery

Operating Range

Dimensions

Net Weight

Laser Pointer

41˚F–95˚F (5 ˚C–35 ˚C)

14˚F–140˚F (-10˚C–60 ˚C)

AAA or LR03 Type x 2

16.4’ (5 m)/±30˚

1.8” (W) x 1.0” (H) x 5.7” (D) (45 mm x 25 mm x 145 mm)

3.5 oz (99 g) (including batteries)

Class II Laser (Max. Output: 1 mW/Wave length: 640–660 nm)

68

Appendix

Accessories

Owner’s Manual (CD-ROM)

Quick Reference Guide

AC Power Cord

Remote Control and Batteries

DVI-VGA Cable

USB Cable

Lens Cover with String

PIN Code Label

Network Application (CD-ROM)

Soft Carrying Case

● The specifications are subject to change without notice.

● LCD panels are manufactured to the highest possible standards. Even though 99.99% of the pixels are effective, a tiny fraction of the pixels (0.01% or less) may be ineffective by the characteristics of the LCD panels.

Optional Parts

The parts listed below are optionally available. When ordering those parts, specify the item name and Model

No. to the sales dealer.

Model No.

COMPONENT-VGA Cable

SCART-VGA Cable

USB Memory

: AH-98771

: AH-98881

: WL-10 (This is used for Memory Viewer operation.)

USB Wireless LAN adapter : WL-30 (This is used for Wireless LAN operation.)

69

Appendix

PJ Link Notice

This projector is compliant with PJLink Standard Class 1 of JBMIA (Japan Business Machine and Information

System Industries Association). This projector supports all commands defined by PJLink Class 1 and is verified conformance with PJLink Standard Class 1.

For PJ Link password, see page 49 on the owner’s manual “Network Set-up and Operation.”

Projector Input

Computer1 (Analog)

Computer1

(Digital)

RGB (PC digital)

RGB (AV HDCP)

RGB

Computer2

Video

Component

RGB (Scart)

Auto

Video

S-video

Wired

Wireless

Memory viewer

PJLink Input

RGB 1

DIGITAL 1

DIGITAL 2

RGB 2

RGB 3

RGB 4

VIDEO 1

VIDEO 2

VIDEO 3

NETWORK 1

NETWORK 2

STORAGE 1

Parameter

11

31

32

12

13

14

21

22

23

51

52

41

PJLink is a registered trademark of JBMIA and pending trademark in some countries.

70

Appendix

Configurations of Terminals

COMPUTER IN 2 /COMPONENT IN /MONITOR OUT (ANALOG)

Terminal: Analog RGB (Mini D-sub 15 pin)

5

15

10

4

14

9

3

13

8

2

12

1

7

11

6

6

7

4

5

8

1

2

3

Red (R/Cr) Input/Output

Green (G/Y) Input/Output

Blue (B/Cb) Input/Output

-----

Ground (Horiz.sync.)

Ground (Red)

Ground (Green)

Ground (Blue)

12

13

14

15

9

10

11

+5V Power

Ground (Vert.sync.)

Ground

DDC Data

Horiz. sync. Input/Output (Composite H/V sync.)

Vert. sync.

DDC Clock

DVI-I TERMINAL (DIGITAL/ANALOG)

1

9

2

10

17 18

3

11

4

12

19 20

5 6

13 14

21 22

7

15

8

16

23 24

C1 C2

C3

C5

C4

C1

C2

C3

C4

C5

Analog Red Input

Analog Green Input

Analog Blue Input

Analog Horiz. sync

Analog Ground (R/G/B)

6

7

4

5

8

1

2

3

T.M.D.S. Data2–

T.M.D.S. Data2+

T.M.D.S. Data2 Shield

No Connect

No Connect

DDC Clock

DDC Data

Analog Vert. sync

12

13

14

15

16

9

10

11

T.M.D.S. Data1–

T.M.D.S. Data1+


No Connect

No Connect

+5V Power

Ground (for +5V)

Hot Plug Detect

20

21

22

23

24

17

18

19

T.M.D.S. Data0–

T.M.D.S. Data0+


No Connect

No Connect

T.M.D.S. Clock Shield

T.M.D.S. Clock+

T.M.D.S. Clock–

USB CONNECTOR (Series A)

1 2 3 4

3

4

1

2

VCC(5V)

– DATA

+ DATA

Ground

USB CONNECTOR (Series B)

2 1

3 4

3

4

1

2

Vcc

- Data

+ Data

Ground

LAN TERMINAL

1

2

3

4

TX +

TX –

RX +

-----

7

8

5

6

8 7 6 5 4 3 2 1

SERVICE PORT CONNECTOR

Terminal : Mini DIN 8-PIN

5

8 7 6

4 3

2 1

3

4

1

2

R X D

-----

-----

GND

7

8

5

6

RTS/CTS

T X D

GND

GND

-----

RX –

-----

-----

71

Appendix

PIN Code Number Memo

Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or lost the number and unable to operate the projector, contact the service station.

PIN Code Lock No.

Factory default set No: 1 2 3 4*

Logo PIN Code Lock No.

Factory default set No: 4 3 2 1*

*Should the four-digit number be changed, the factory set number will be invalid.

While the projector is locked with the PIN code...

Put the label below (supplied) on in a prominent place of the projector's body while it is locked with a PIN code.

72

KW6BC

U.S.A.

EIKI International, Inc.

30251 Esperanza

Rancho Santa Margarita

CA 92688-2132

U.S.A.

Tel : 800-242-3454 (949)-457-0200

Fax : 800-457-3454 (949)-457-7878

E-Mail : [email protected]

Deutschland & Österreich

EIKI Deutschland GmbH

Am Frauwald 12

65510 Idstein

Deutschland

Tel : 06126-9371-0

Fax : 06126-9371-14


China

EIKI (Shanghai) Co.,LTD

1. Dapu Road, Golden Magnolia Plaza

#2109 Shanghai,

200023 China

Tel : 86-21-5396-0088

Fax : 86-21-5396-0318


Canada

EIKI CANADA - Eiki International, Inc.

P.O. Box 156, 310 First St. - Unit 2,

Midland, ON, L4R 4K8, Canada

Tel : 800-563-3454 (705)-527-4084

Fax : 800-567-4069 (705)-527-4087


Eastern Europe

Umelecká 15

170 00 Praha 7

Czech Republic

Tel : +42 02 20570024

+42 02 20571413

Fax : +42 02 20571411


Japan & Worldwide

EIKI Industrial Company Limited.

4-12 Banzai-Cho, Kita-Ku, Osaka,

530-0028 Japan

Tel : +81-6-6311-9479

Fax : +81-6-6311-8486

WorldWide Website http://www.eiki.com

© 2006 Eiki International, Inc.

No results