advertisement
Powerful
Subwoofer with Advanced
Technology for Top-Class
Sound Quality.
Ideal Match for 225 Series
Speakers.
YST-SW225
Advanced YST II and QD-Base Subwoofer
䢇 QD-Bass (Quatre Dispersion Bass) Technology
䢇
Advanced YST II (Yamaha Active Servo
Technology II)
䢇 PWM Digital Drive High Efficiency Amplifier
䢇 Linear Port for Minimizing Extraneous Noise
䢇 150 W Dynamic Power
䢇 BASS (Bass Action Selector System)
䢇 20cm (8”) Multi-Range Driver with Magnetic
Shielding
䢇 28–200Hz Low Frequency Reproduction
䢇
Auto Standby with Sensitivity Selector
(HIGH, LOW and OFF)
䢇 Low (0.5W) Standby Power Consumption
P10014978W-YSTSW225@NPB_Birch
Main Specifications
Dynamic Power
Output Power
150 W
(5 ohms, 100Hz, 10% THD) 120 W
Frequency Response 28–200 Hz
High Cut Filter
(Continuously Variable) 40–140 Hz
Driver 20cm (8”) multi-range
Standby Power Consumption 0.5 W
Dimensions (W x H x D) 290 x 350 x 349 mm
11-7/16” x 13-3/4” x 13-3/4”
Weight 11.5 kg; 25.3 lbs.
YST-SW225
Subwoofer
QD-Bass Technology Allows Free
Placement
QD-Bass (Quatre
Dispersion Bass) technology uses down-firing drivers with square, pyramid-shaped reflective plates to radiate the sound efficiently in four horizontal directions. The reflective plates
(not used in competitors’ down-firing subwoofers) negate any effects caused by the floor surface and reduce resonance between sound waves reflected from the floor and the unit. Also, most other systems use circular cones, but by radiating in four directions to avoid the legs of the cabinet, QD-Bass reduces turbulence caused by reflection from the legs. Changing the height of the square pyramid varies the acoustic load, permitting relatively simple high-cut adjustment and improved bandpass properties.
The QD-Bass system provides extraordinary power and smooth frequency response from an extremely compact unit.
It also allows greater freedom of placement, since the sound radiates with equal effectiveness in all directions.
Converter (ANIC) circuits, this system dynamically optimizes effective speaker impedance to maintain excellent linearity.
This means more stable and accurate low range response, not to mention higher sound pressure levels, for more natural and energetic bass reproduction.
New Linear Port
The Linear Port provides smooth bass response during palyback and minimizing extraneous noise.
PWM Digital Drive High Efficiency
Amplifier
The YST-SW225 delivers high power outputs at deep bass levels, with excellent stability and low power consumption, even with their compact cabinets. This is made possible by a highly efficient power amplifier.
The power amplifier achieves superior conversion efficiency by supplying maximum power (minimizing power loss) from the power transistors according to the output level. It delivers stable power output with high efficiency
Advanced YST II for Awesome Deep
Bass
Yamaha's newly developed Advanced
YST II (Yamaha Active
Servo Technology II) combines negativeimpedance and constant-current principles to drive the speaker cone with even tighter control than previously. Using
Advanced Negative Impedance
NS-225F
2-Way Acoustic
Suspension Tower
Speaker System
NS-M225
2-Way Acoustic Suspension
Speaker System
High-Amplitude
Bass Sound
Air Woofer
(Helmholtz Resonator)
Cabinet
Port
Advanced Negative-
Impedance Converter
Active
Servo
Processing
Amplifier
Signals
NS-C225
2-Way Acoustic
Suspension
Center Speaker
System
NEW PRODUCT BULLETIN while minimizing power consumption and heat production. It does not require an output filter coil, resulting in extremely low noise and distortion. High speed transient response is also excellent.
BASS
The BASS (Bass Action Selector System) function lets you switch between Movie and Music modes, providing the optimum frequency response in each case.
Environmentally Friendly
Internal parts and circuit boards do not contain lead, which is often used in other subwoofer brands, and is harmful to the environment. Both models also have a low-power standby mode, in which power consumption is only 0.5W.
Other Notable Feafures
• 20cm (8”) Multi-Range Driver with
Magnetic Shielding
• 28–200Hz Low Frequency
Reproduction
• Auto Standby with Sensitivity Selector
(HIGH, LOW and OFF)
The YST-SW225 is designed to acoustically match the speakers in the 225 Series, and is recommended to be sold together with them.
Signals of Low Amplitude
• Product designs and specifications are subject to change without notice.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement