Chauvet Legend 412 User manual
Add to my manuals
26 Pages
Chauvet Legend 412 is a state-of-the-art moving head fixture powered by a 40W RGBW LED engine, which delivers a brilliant output with rich colors and smooth transitions. It boasts a wide array of features, including motorized focus, a 6-facet prism, rotating gobos, and a frost filter, allowing for versatile beam shaping and dynamic effects. With its compact size, quiet operation, and 16-bit dimming, the Legend 412 is ideal for a variety of applications such as concerts, live events, stage productions, and nightclubs.
advertisement
User Manual
Edition Notes
Edition
Notes
The Legend™ 412Z User Manual Rev. 4 covers the description, safety precautions, installation, programming, operation, and maintenance of the Legend™ 412Z. Chauvet released this edition of the Legend™ 412Z User Manual in April 2015.
Trademarks CHAUVET® is a registered trademark of CHAUVET & Sons Inc. (d/b/a CHAUVET® or
Chauvet). The CHAUVET® logo in its entirety including the CHAUVET® name and the dotted triangle, and all other trademarks in this manual pertaining to services, products, or marketing statements are owned or licensed by Chauvet. Any other product names, logos, brands, company names, and other trademarks featured or referred to within this document are the property of their respective trademark holders.
Copyright Notice Chauvet owns the content of this User Manual in its entirety, including but not limited to pictures, logos, trademarks, and resources.
© Copyright 2015 Chauvet. All rights reserved.
Electronically published by Chauvet in the United States of America.
Manual Use Chauvet authorizes its customers to download and print this manual for professional information purposes only. Chauvet expressly prohibits the usage, copy, storage, distribution, modification, or printing of this manual or its content for any other purpose without written consent from
Chauvet.
Document
Printing
For better results, print this document in color, on letter size paper (8.5 x 11 in), double-sided. If using A4 paper (210 x 297 mm), configure your printer to scale the content accordingly.
Intended
Audience
Any person in charge of installing, operating, and/or maintaining this product should completely read through the guide that shipped with the product, as well as this manual, before installing, operating, or maintaining this product.
Disclaimer Chauvet believes that the information contained in this manual is accurate in all respects.
However, Chauvet assumes no responsibility for any errors or omissions in this document.
Chauvet reserves the right to revise and make changes to the content of this document without obligation that Chauvet notify any person or company of such revision or changes. This does not in any way constitute a commitment by Chauvet to make such changes. Chauvet may issue a revision of this manual or a new edition to incorporate such changes.
Document
Revision
The Legend™ 412Z User Manual Rev. 4 supersedes all previous versions of this manual.
Discard any older versions of this manual and replace with this version. Go to www.chauvetprofessional.com
for the latest version.
Author
D. Couppe
Date
4/1/15
Editor
M. Trouard
Date
4/9/15
Legend™ 412Z User Manual Rev. 4
Table of Contents
Table of Contents
Legend™ 412Z User Manual Rev. 4 -i-
Table of Contents
-ii- Legend™ 412Z User Manual Rev. 4
Before You Begin
1.
B
EFORE
Y
OU
B
EGIN
What Is
Included
· Legend™ 412Z
· Neutrik® powerCON® power cord
· Omega Bracket with mounting hardware
· Warranty Card
· Quick Reference Guide
Claims Carefully unpack the product immediately and check the box to make sure all the parts are in the package and are in good condition.
If the box or the contents (the product and included accessories) appear damaged from shipping or show signs of mishandling, notify the carrier immediately, not Chauvet. Failure to report damage to the carrier immediately may invalidate your claim. In addition, keep the box and contents for inspection.
For other issues, such as missing components or parts, damage not related to shipping, or concealed damage, file a claim with Chauvet within 7 days of delivery.
Manual
Conventions
Convention Meaning
1–512
50/60
A range of values in the text
A set of mutually exclusive values in the text
<SET>
Settings
A button on the product’s control panel
A product function or a menu option
MENU>Settings A sequence of menu options
1–10 A range of menu values from which to choose in a menu
Yes/No
ON
A set of two mutually exclusive menu options in a menu
A unique value to be entered or selected in a menu
Symbols
Symbols Meaning
Critical installation, configuration, or operation information. Failure to comply with this information may cause the product not to work, damage third-party equipment, or cause harm to the operator.
Important installation or configuration information. Failure to comply with this information may keep the product from working.
Useful information.
The term “DMX” used throughout this manual refers to the USITT DMX512-A digital data transmission protocol.
-1- Legend™ 412Z User Manual Rev. 4
Before You Begin
Product At A
Glance
Use on Dimmer
Outdoor Use
Sound-Activated
DMX
Master/Slave x
Auto Programs x Auto-Ranging Power
Supply x
Replaceable Fuse
P
User-Serviceable
P x
P
P x
Safety Notes
Read all the following Safety Notes before working with this product. These notes include important information about the installation, usage, and maintenance of this product.
This product contains no user-serviceable parts. Any reference to servicing in this
User Manual will only apply to properly trained Chauvet certified technicians. Do not open the housing or attempt any repairs.
All applicable local codes and regulations apply to proper installation of this product.
Personal Safety
· Avoid direct eye exposure to the light source while the product is on.
· Always disconnect this product from its power source before servicing.
Mounting And
· Always connect this product to a grounded circuit to avoid the risk of electrocution.
· Do not touch this product’s housing during operation because it may be very hot.
· Mount this product in a location with adequate ventilation, at least 20 in (50 cm) from
Rigging adjacent surfaces.
· CAUTION: When transferring product from extreme temperature environments, (e.g. cold truck to warm humid ballroom) condensation may form on the internal electronics of the product. To avoid causing a failure, allow product to fully acclimate to the surrounding environment before connecting it to power.
· Make sure there are no flammable materials close to this product while it is operating.
· When hanging this product, always secure to a fastening device using a safety cable.
· Always make sure you are connecting this product to the proper voltage in accordance
Power And
Wiring with the specifications in this manual or on the product’s specification label.
· Never connect this product to a dimmer pack or rheostat.
· Never disconnect this product by pulling or tugging on the power cable.
Operation
· Do not operate this product if you see damage on the housing, lenses, or cables. Have the damaged parts replaced by an authorized technician at once.
· To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the product from power via breaker or by unplugging it.
· Do not cover the ventilation slots when operating to avoid internal overheating.
· The maximum ambient temperature is 113 °F (45 °C). Do not operate this product at a higher temperature.
· In case of a serious operating problem, stop using this product immediately!
In the unlikely event that your Chauvet product may require service, contact Chauvet
Technical Support.
Expected LED
Lifespan
LEDs gradually decline in brightness over time, mostly because of heat. Packaged in clusters,
LEDs exhibit higher operating temperatures than in ideal, single-LED conditions. For this reason, using clustered LEDs at their fullest intensity significantly reduces the LEDs’ lifespan.
Under normal conditions, this lifespan can be 40,000 to 50,000 hours. If extending this lifespan is vital, lower the operating temperature by improving the ventilation around the product and reducing the ambient temperature to an optimal operating range. In addition, limiting the overall projection intensity may also help to extend the LEDs’ lifespan.
-2- Legend™ 412Z User Manual Rev. 4
Introduction
2.
I
NTRODUCTION
Description
Legend™ 412Z is a powerful and versatile LED wash fixture with an outstanding zoom range of
11° to 53°, making it perfect for a wide array of applications, from touring to broadcast. The
Legend™ 412Z features twelve 10-watt quad-color RGBW emitters with four zones of independent pixel mapping control, providing ultimate versatility in programming and use.
Features
· 15-, 27-, 31-, or 34-channel quad-color LED wash product
· Operating modes:
· 15-channel: 16-bit P/T control, P/T speed, RGBW, dimmer, strobe, color macro, macro speed, zoom, reset
· 27-channel: 16-bit P/T control, P/T speed, RGBW quadrant control, dimmer, strobe, color macro, macro speed, zoom, reset
· 31-channel: 16-bit P/T control, P/T speed, RGBW and dimmer quadrant control; strobe, color macro, macro speed, zoom, reset
· 34-channel: 16-bit P/T control, P/T speed, RGBW, dimmer, and strobe quadrant control; color macro, macro speed, zoom, reset
· 4 zones of LED control
· Fast and precise pan/tilt movement
· Versatile 11° to 53° zoom range
· 12 powerful 10-watt long-life quad-color RGBW LEDs
· Strobe macros with quadrant control
· Neutrik® powerCON® power input/output connections
· 3-pin and 5-pin DMX input/output connections
· Flicker-free operation for wide market application including broadcast and film
Legend™ 412Z User Manual Rev. 4 -3-
Introduction
Overview
Control
Panel
Front View
Mounting
Bracket
Side View
Fan
Fuse
Bottom View
Handle
-4-
Rear View
Top View
Legend™ 412Z User Manual Rev. 4
Introduction
Dimensions
13.66 in
347 mm
13.98 in
355 mm
12.5 in
318 mm
Legend™ 412Z User Manual Rev. 4
7.21 in
183 mm
5.51 in
140 mm
10.2 in
259 mm
10.67 in
271 mm
10.67 in
271 mm
5.59 in
142 mm
6.37 in
171 mm
-5-
Setup
3.
S
ETUP
AC Power
Each Legend™ 412Z has an auto-ranging power supply that works with an input voltage range of 100 to 240 VAC, 50/60 Hz. To determine the power requirements for each Legend™ 412Z,
refer to the label affixed to the product. You can also refer to the Technical Specifications chart
in this manual.
The listed current rating indicates the maximum current draw during normal operation. For more information, you may download Sizing Circuit Breakers from the Chauvet website: www.chauvetprofessional.com
.
· Always connect this product to a protected circuit with an appropriate electrical ground to avoid the risk of electrocution or fire.
· To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the product from power via breaker or by unplugging it.
Never connect this product to a rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer channel serves only as a 0 to 100% switch.
AC Plug The Legend™ 412Z comes with a Neutrik® powerCON A connector on one end and an Edison plug on the other end (US market). If the power cord adapter that came with your product has no plug or you need to change the Edison plug, use the table below to wire the new plug..
Connection Wire (U.S.) Wire (Europe) Screw Color
AC Live
AC Neutral
AC Ground
Black
White
Green/Yellow
Brown
Blue
Green/Yellow
Yellow or Brass
Silver
Green
Fuse
Replacement
1. Disconnect this product from the power outlet.
2. Using a Phillips #2 head screwdriver, unscrew the fuse holder cap from the housing.
3. Remove the blown fuse and replace with another fuse of the same type and rating
(T 6.3 A, 250 V).
4. Screw the fuse holder cap back in place and reconnect power.
Make sure to disconnect the product’s power cord before replacing a blown fuse. Always replace the blown fuse with another of the same type and rating.
Power Linking
The Legend™ 412Z supports power linking. You can power link up to 9 products at 120 V; up to
15 at 208 V; or up to 17 at 230 V.
This product comes with a power input cord. Power linking cables are available from Chauvet for purchase.
DMX Linking
You can link the Legend™ 412Z to a DMX controller using a standard DMX serial connection. If using other DMX compatible products with the Legend™ 412Z, you can control each individually with a single DMX controller.
DMX Modes The Legend™ 412Z uses the standard DMX data connection for the 15-, 27-, 31-, and
34-channel DMX modes.
Introduction chapter for a brief description of these modes.
Operation chapter to learn how to configure the Legend™ 412Z to work in
these modes.
· The
DMX Values section provides you with detailed information regarding the DMX modes.
-6- Legend™ 412Z User Manual Rev. 4
Setup
Mounting
Before mounting this product, read and follow the Safety Notes . For our CHAUVET®
Professional line of mounting clamps, go to http://trusst.com/products/ .
Orientation Always mount this product in a safe position and make sure there is adequate room for ventilation, configuration, and maintenance.
Rigging Chauvet recommends using the following general guidelines when mounting this product.
· When selecting an installation location, consider easy access to this product for operation, programming adjustments, and routine maintenance.
· Make sure to mount this product away from any flammable material as indicated in the
· Never mount in places where rain, high humidity, extreme temperature changes, or restricted ventilation may affect the product.
· If hanging this product, make sure that the mounting location can support the product’s
weight. See the Technical Specifications for the weight-bearing requirements of this
product.
· When hanging this product, always secure to a fastening device using a safety cable.
Procedure The Legend™ 412Z comes with a double-yoke bracket to which you can either attach mounting clamps for hanging or simply use as a floor stand. You must supply your own mounting clamps.
Make sure the clamps are capable of supporting the weight of this product. Use at least one mounting point per product.
Mounting Clamps
Safety Cable
Mounting Diagram
Floor Mounting
Omega Brackets
Overhead Mounting
When using only one mounting clamp with this fixture, you must use a clamp with a captive bolt to prevent accidental loosening.
Legend™ 412Z User Manual Rev. 4 -7-
Operation
4.
O
PERATION
Control Panel
Description
Button
<MENU>
<ENTER>
<UP>
<DOWN>
Function
Exits from the current menu or function
Enables the currently displayed menu or sets the currently selected value in to the current function
Navigates upward through the menu list and increases the numeric value when in a function
Navigates downward through the menu list and decreases the numeric value when in a function
Control Options
You can set the Legend™ 412Z starting address in the 001–512 DMX range. This enables control of up to 15 products in the 34-channel 34chan personality.
Programming
Refer to the Menu Map to understand the menu options. The menu map shows the main level and a variable number of programming levels for each option.
· To go to the desired main level, press <MENU> repeatedly until the option shows on the display. Press <ENTER> to select. This will take you to the first programming level for that option.
· To select an option or value within the current programming level, press <UP> or
<DOWN> until the option shows on the display. Press <ENTER> to select. In this case, if there is another programming level, you will see that first option, or you will see the selected value.
· Press <MENU> repeatedly to exit to the previous main level.
Menu Map
Main Level Programming Levels Description
DMX Address
Channel Mode
Pan Inverse
Tilt Inverse
Back Light
001–512
15chan
27chan
31chan
34chan
Yes
No
Yes
No
On
Off
Selects the DMX starting address
Selects 15–channel DMX personality
Selects 27–channel DMX personality
Selects 31–channel DMX personality
Selects 34–channel DMX personality
Defines the direction of the pan function
Defines the direction of the tilt function
Display backlight always on
Display backlight turns off after 1 min.
White Balance
Red
Green
Blue
125–255
Defines the color temperature when the red, green, and blue faders are set at 100%
-8- Legend™ 412Z User Manual Rev. 4
Operation
Menu Map (Cont.)
Main Level
Manual Test
Fan Mode
Programming Levels
Pan
Tilt
Red1
Green1
Blue1
White1
Red2
Green2
Blue2
White2
Red3
Green3
Blue3
White3
Red4
Green4
Blue4
White4
Zoom
Dimmer
Strobe
Auto Test
Temp.
000–255
Low
High
Auto
Fixture Time
Firmware Version
Reset
Description
Sets Pan 0–540°
Sets Tilt 0–270°
Sets Quadrant 1 red LED intensity
Sets Quadrant 1 green LED intensity
Sets Quadrant 1 blue LED intensity
Sets Quadrant 1 white LED intensity
Sets Quadrant 2 red LED intensity
Sets Quadrant 2 green LED intensity
Sets Quadrant 2 blue LED intensity
Sets Quadrant 2 white LED intensity
Sets Quadrant 3 red LED intensity
Sets Quadrant 3 green LED intensity
Sets Quadrant 3 blue LED intensity
Sets Quadrant 3 white LED intensity
Sets Quadrant 4 red LED intensity
Sets Quadrant 4 green LED intensity
Sets Quadrant 4 blue LED intensity
Sets Quadrant 4 white LED intensity
Sets zoom position
Sets dimmer value
Selects the strobe frequency (0–20 Hz)
Starts the product’s test sequence
Shows the product’s current temperature (°C)
Selects the fan’s operation mode.
Shows the total amount of time the product has been used (hours)
Shows the version of the software that has been installed
Resets product to its home setting
Legend™ 412Z User Manual Rev. 4 -9-
Operation
Pan Inverse This setting allows the user to invert the direction of the pan control.
1. Go to the Pan Inverse main level.
2. Select Yes or No.
Tilt Inverse This setting allows the user to invert the direction of the pan control.
1. Go to the Tilt Inverse main level.
2. Select Yes or No.
Back Light This setting determines whether the control panel display backlight stays on indefinitely or turns off after 1 minutes of inactivity.
1. Go to the Back Light main level.
2. Select Yes or No.
Fixture Time This option shows the amount of hours the Legend™ 412Z has been in use throughout its lifetime.
· Go to the Fixture Time main level.
Software Version This option shows the user the software version currently installed in the Legend™ 412Z.
· Go to the Firmware Version main level.
Temperature This setting allows the user to view the internal temperature (C°) of the Legend™ 412Z.
· Go to the Temp. main level.
Static Color
(Manual Test)
The Static Color mode allows for permanent positioning, strobing, dimming, and RGBW color mixing without a DMX controller.
1. Go to the Manual Test main level.
2. Select the desired position (Pan or Tilt). a. Select the position value (000–255). b. Repeat for the other position.
3. Select the desired color (Red 1–4, Green 1–4, Blue 1–4, or White 1–4). a. Select the color value (000–255). b. Repeat for the other colors.
4. Select the beam angle (Zoom).
· Select the angle value (000–255).
5. Select the intensity (Dimmer).
· Select the intensity value (000–255).
6. Select the strobe frequency from 0–20 Hz (Strobe).
· Select the strobe value (000–255).
Reset This setting allows you to reset the Legend™ 412Z to the default values, including the custom programs.
1. Go to the Reset main level.
2. Wait for the reset process to finish.
White Calibration This setting allows you to select the white color shown by the Legend™ 412Z when the DMX controller’s red, green, and blue faders are set to 255.
1. Go to the White Balance main level.
2. Select a color (Red, Green, or Blue).
3. Select a color value (125–255).
4. Repeat for the other colors.
When selecting White Balance, you will only be able to define the values of Red, Green, or Blue.
The values of Red, Green, or Blue configured from White Balance will define the color temperature shown when the RGB faders are set to 255.
-10- Legend™ 412Z User Manual Rev. 4
Operation
Auto Test This setting starts the products test sequence.
· Go to the Auto Test main level.
Fan Mode This setting allows you to control the fan speed.
1. Go to the Fan Mode main level.
2. Select the desired speed (Low, High, or Auto).
· When in AUTO, the fan speed automatically changes so the product’s temperature does not exceed the maximum allowed value.
· When in the other settings, the fan speed follows the predefined values.
· The internal controller will override any manual setting if the internal temperature rises above a certain level.
DMX Personality This setting allows you to choose a particular DMX personality.
1. Go to the Channel Mode main level.
2. Select the desired personality (15chan, 27chan, 31chan, or 34chan).
DMX Values section for the highest starting address you can select for each
personality.
· Make sure that the starting addresses on the various products do not overlap due to the new personality setting.
DMX Control In this mode, each product will respond to a unique starting address from the DMX controller. All products with the same starting address will respond in unison.
1. Select a DMX personality as shown in DMX Personality .
2. Set the starting address: a. Go to the DMX Address main level. b. Select the starting address (001–512).
The highest recommended starting address for each DMX mode is as follows:
DMX Personality DMX Address DMX Personality DMX Address
15chan
27chan
498
486
31chan
34chan
482
479
Legend™ 412Z User Manual Rev. 4 -11-
Operation
DMX Values
15chan
Channel
1
2
3
4
5
6
Function
Pan
Fine Pan
Tilt
Fine Tilt
P/T Speed
Dimmer
7 Strobe
8
9
10
11
Red
Green
Blue
White
Value Percent/Setting
000 ó 255 0–540°
000 ó 255 Fine control of panning
000 ó 255 0–270°
000 ó 255 Fine control of tilting
000 ó 255 Pan/Tilt speed (fast to slow)
000 ó 255 0–100%
000 ó 019
020 ó 039
040 ó 059
060 ó 079
080 ó 099
100 ó 119
120 ó 139
140 ó 159
160 ó 179
180 ó 199
200 ó 219
220 ó 255
No function
0–20 Hz
Strobe Macro 1
Strobe Macro 2
Strobe Macro 3
Strobe Macro 4
Strobe Macro 5
Strobe Macro 6
Strobe Macro 7
Strobe Macro 8
Strobe Macro 9
No function
000 ó 255 0–100%
000 ó 255 0–100%
000 ó 255 0–100%
000 ó 255 0–100%
-12- Legend™ 412Z User Manual Rev. 4
DMX Values (cont.)
15chan
(cont.)
Channel Function
12 Color Macro
13
14
Macro Speed
Zoom
15 Reset
Value Percent/Setting
000 ó 019
020 ó 029
030 ó 039
040 ó 049
050 ó 059
060 ó 069
070 ó 079
080 ó 089
090 ó 099
100 ó 109
110 ó 119
120 ó 129
130 ó 139
140 ó 149
150 ó 159
160 ó 169
170 ó 179
180 ó 189
190 ó 199
200 ó 209
210 ó 219
220 ó 229
230 ó 239
240 ó 255
000 ó 255 0–100%
000 ó 255 0–100%
No function
Macro 1
Macro 2
Macro 3
Macro 4
Macro 5
Macro 6
Macro 7
Macro 8
Macro 9
Macro 10
Macro 11
Macro 12
Macro 13
Macro 14
Macro 15
Macro 16
Macro 17
Macro 18
Macro 19
Macro 20
Macro 21
Macro 22
Macro 23
000 ó 007
008 ó 069
070 ó 129
130 ó 190
191 ó 205
206 ó 255
No function
Reset pan/tilt
Reset all
Pan/tilt movement blackout
Zoom presets
No function
Operation
Legend™ 412Z User Manual Rev. 4 -13-
Operation
DMX Values (cont.)
27chan
Channel
1
2
3
4
5
6
7
Function
Pan
Fine Pan
Tilt
Fine Tilt
P/T Speed
Dimmer
Strobe
-14-
22
23
Legend™ 412Z
Quadrants for
DMX Control
14
15
16
17
18
19
20
21
8
9
10
11
12
13
Red Quadrant 1
Green Quadrant 1
Blue Quadrant 1
White Quadrant 1
Red Quadrant 2
Green Quadrant 2
Blue Quadrant 2
White Quadrant 2
Red Quadrant 3
Green Quadrant 3
Blue Quadrant 3
White Quadrant 3
Red Quadrant 4
Green Quadrant 4
Blue Quadrant 4
White Quadrant 4
Value Percent/Setting
000 ó 255 0–540°
000 ó 255 Fine control of panning
000 ó 255 0–270°
000 ó 255 Fine control of tilting
000 ó 255 Pan/Tilt speed (fast to slow)
000 ó 255 0–100%
000 ó 019
020 ó 039
040 ó 059
060 ó 079
080 ó 099
100 ó 119
120 ó 139
140 ó 159
160 ó 179
180 ó 199
200 ó 219
220 ó 255
No function
0–20 Hz
Strobe Macro 1
Strobe Macro 2
Strobe Macro 3
Strobe Macro 4
Strobe Macro 5
Strobe Macro 6
Strobe Macro 7
Strobe Macro 8
Strobe Macro 9
No function
000 ó 255 0–100%
000 ó 255 0–100%
000 ó 255 0–100%
000 ó 255 0–100%
000 ó 255 0–100%
000 ó 255 0–100%
000 ó 255 0–100%
000 ó 255 0–100%
000 ó 255 0–100%
000 ó 255 0–100%
000 ó 255 0–100%
000 ó 255 0–100%
000 ó 255 0–100%
000 ó 255 0–100%
000 ó 255 0–100%
000 ó 255 0–100%
Legend™ 412Z User Manual Rev. 4
DMX Values (cont.)
27chan
(cont.)
Channel Function
24 Color Macro
25
26
Macro Speed
Zoom
27 Reset
Value Percent/Setting
000 ó 019
020 ó 029
030 ó 039
040 ó 049
050 ó 059
060 ó 069
070 ó 079
080 ó 089
090 ó 099
100 ó 109
110 ó 119
120 ó 129
130 ó 139
140 ó 149
150 ó 159
160 ó 169
170 ó 179
180 ó 189
190 ó 199
200 ó 209
210 ó 219
220 ó 229
230 ó 239
240 ó 255
000 ó 255 0–100%
000 ó 255 0–100%
No function
Macro 1
Macro 2
Macro 3
Macro 4
Macro 5
Macro 6
Macro 7
Macro 8
Macro 9
Macro 10
Macro 11
Macro 12
Macro 13
Macro 14
Macro 15
Macro 16
Macro 17
Macro 18
Macro 19
Macro 20
Macro 21
Macro 22
Macro 23
000 ó 007
008 ó 069
070 ó 129
130 ó 190
191 ó 205
206 ó 255
No function
Reset pan/tilt
Reset all
Pan/tilt movement blackout
Zoom presets
No function
Operation
Legend™ 412Z User Manual Rev. 4 -15-
Operation
DMX Values (cont.)
31chan
Channel
1
8
9
10
11
12
13
14
15
16
17
18
19
22
23
24
25
2
3
4
5
6
7
20
21
26
27
Function Value Percent/Setting
Pan
Fine Pan
Tilt
Fine Tilt
000 ó 255 0–540°
000 ó 255 Fine control of panning
000 ó 255 0–270°
000 ó 255 Fine control of tilting
000 ó 255 Pan/Tilt speed (fast to slow) P/T Speed
Dimmer
Strobe
Red Quadrant 1
000 ó 255 0–100%
000 ó 019
020 ó 039
040 ó 059
060 ó 079
080 ó 099
100 ó 119
120 ó 139
140 ó 159
160 ó 179
180 ó 199
200 ó 219
220 ó 255
No function
0–20 Hz
Strobe Macro 1
Strobe Macro 2
Strobe Macro 3
Strobe Macro 4
Strobe Macro 5
Strobe Macro 6
Strobe Macro 7
Strobe Macro 8
Strobe Macro 9
No function
000 ó 255 0–100%
000 ó 255 0–100% Green Quadrant 1
Blue Quadrant 1
White Quadrant 1
000 ó 255 0–100%
000 ó 255 0–100%
Dimmer Quadrant 1 000 ó 255 0–100%
Red Quadrant 2
Green Quadrant 2
000 ó 255 0–100%
000 ó 255 0–100%
Blue Quadrant 2
White Quadrant 2
000 ó 255 0–100%
000 ó 255 0–100%
Dimmer Quadrant 2 000 ó 255 0–100%
Red Quadrant 3
Green Quadrant 3
Blue Quadrant 3
000 ó 255 0–100%
000 ó 255 0–100%
000 ó 255 0–100%
White Quadrant 3 000 ó 255 0–100%
Dimmer Quadrant 3 000 ó 255 0–100%
Red Quadrant 4 000 ó 255 0–100%
Green Quadrant 4
Blue Quadrant 4
000 ó 255 0–100%
000 ó 255 0–100%
000 ó 255 0–100% White Quadrant 4
Dimmer Quadrant 4 000 ó 255 0–100%
-16- Legend™ 412Z User Manual Rev. 4
DMX Values (cont.)
31chan
(cont.)
Channel Function
28 Color Macro
29
30
Macro Speed
Zoom
31 Reset
Value Percent/Setting
000 ó 019
020 ó 029
030 ó 039
040 ó 049
050 ó 059
060 ó 069
070 ó 079
080 ó 089
090 ó 099
100 ó 109
110 ó 119
120 ó 129
130 ó 139
140 ó 149
150 ó 159
160 ó 169
170 ó 179
180 ó 189
190 ó 199
200 ó 209
210 ó 219
220 ó 229
230 ó 239
240 ó 255
000 ó 255 0–100%
000 ó 255 0–100%
No function
Macro 1
Macro 2
Macro 3
Macro 4
Macro 5
Macro 6
Macro 7
Macro 8
Macro 9
Macro 10
Macro 11
Macro 12
Macro 13
Macro 14
Macro 15
Macro 16
Macro 17
Macro 18
Macro 19
Macro 20
Macro 21
Macro 22
Macro 23
000 ó 007
008 ó 069
070 ó 129
130 ó 190
191 ó 205
206 ó 255
No function
Reset pan/tilt
Reset all
Pan/tilt movement blackout
Zoom presets
No function
Operation
Legend™ 412Z User Manual Rev. 4 -17-
Operation
DMX Values (cont.)
34chan
Channel
1
19
20
21
26
27
28
5
6
7
2
3
4
8
9
10
11
12
13
14
15
16
17
18
22
23
24
25
29
30
Function Value Percent/Setting
Pan
Fine Pan
Tilt
Fine Tilt
000 ó 255 0–540°
000 ó 255 Fine control of panning
000 ó 255 0–270°
000 ó 255 Fine control of tilting
000 ó 255 Pan/Tilt speed (fast to slow) P/T Speed
Dimmer
Red Quadrant 1
000 ó 255 0–100%
000 ó 255 0–100%
000 ó 255 0–100% Green Quadrant 1
Blue Quadrant 1
White Quadrant 1
000 ó 255 0–100%
000 ó 255 0–100%
Dimmer Quadrant 1 000 ó 255 0–100%
Strobe Quadrant 1
000 ó 019
020 ó 249
250 ó 255
No function
0–20 Hz
No function
Red Quadrant 2
Green Quadrant 2
Blue Quadrant 2
000 ó 255 0–100%
000 ó 255 0–100%
000 ó 255 0–100%
White Quadrant 2 000 ó 255 0–100%
Dimmer Quadrant 2 000 ó 255 0–100%
Strobe Quadrant 2
Red Quadrant 3
000 ó 019
020 ó 249
250 ó 255
No function
0–20 Hz
No function
000 ó 255 0–100%
Green Quadrant 3
Blue Quadrant 3
000 ó 255 0–100%
000 ó 255 0–100%
000 ó 255 0–100% White Quadrant 3
Dimmer Quadrant 3 000 ó 255 0–100%
Strobe Quadrant 3
000 ó 019
020 ó 249
250 ó 255
No function
0–20 Hz
No function
Red Quadrant 4
Green Quadrant 4
000 ó 255 0–100%
000 ó 255 0–100%
000 ó 255 0–100% Blue Quadrant 4
White Quadrant 4 000 ó 255 0–100%
Dimmer Quadrant 4 000 ó 255 0–100%
Strobe Quadrant 4
000 ó 019
020 ó 249
250 ó 255
No function
0–20 Hz
No function
-18- Legend™ 412Z User Manual Rev. 4
DMX Values (cont.)
34chan
(cont.)
Channel Function
31 Color Macro
32
33
Macro Speed
Zoom
34 Reset
Value Percent/Setting
000 ó 019
020 ó 029
030 ó 039
040 ó 049
050 ó 059
060 ó 069
070 ó 079
080 ó 089
090 ó 099
100 ó 109
110 ó 119
120 ó 129
130 ó 139
140 ó 149
150 ó 159
160 ó 169
170 ó 179
180 ó 189
190 ó 199
200 ó 209
210 ó 219
220 ó 229
230 ó 239
240 ó 255
000 ó 255 0–100%
000 ó 255 0–100%
No function
Macro 1
Macro 2
Macro 3
Macro 4
Macro 5
Macro 6
Macro 7
Macro 8
Macro 9
Macro 10
Macro 11
Macro 12
Macro 13
Macro 14
Macro 15
Macro 16
Macro 17
Macro 18
Macro 19
Macro 20
Macro 21
Macro 22
Macro 23
000 ó 007
008 ó 069
070 ó 129
130 ó 190
191 ó 205
206 ó 255
No function
Reset pan/tilt
Reset all
Pan/tilt movement blackout
Zoom presets
No function
Operation
Legend™ 412Z User Manual Rev. 4 -19-
Technical Information
5.
T
ECHNICAL
I
NFORMATION
Product
Maintenance
To maintain optimum performance and minimize wear, you should clean this product frequently. Usage and environment are contributing factors in determining the cleaning frequency.
As a rule, clean this product at least twice a month. Dust build-up reduces light output performance and can cause overheating. This can lead to reduced light source life and increased mechanical wear.
To clean your product:
1. Unplug the product from power.
2. Wait until the product is at room temperature.
3. Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the external vents.
4. Clean all external surfaces with a mild solution of non-ammonia glass cleaner or isopropyl alcohol.
5. Apply the solution directly to a soft, lint-free cotton cloth or a lens cleaning tissue.
6. Wipe any dirt or grime to the outside edges of the lens surface.
7. Gently polish the lens surfaces until they are free of haze and lint.
Always dry the external surfaces thoroughly and carefully after cleaning them.
Do not spin the cooling fans while blowing compressed air into them.
-20- Legend™ 412Z User Manual Rev. 4
Technical Specification
6.
T
ECHNICAL
S
PECIFICATIONS
Dimensions and
Weight
Length Width
7.21 in (183 mm) 10.67 in (271 mm)
Height
13.98 in (355 mm)
Weight
16.6 lb (7.5 kg)
Note: Dimensions in inches rounded to the nearest decimal digit.
Power
Power Supply Type Range Voltage Selection
Light Source
Switching (internal)
Parameter
Consumption
Current
Power linking current
(products)
Fuse/Breaker
Power I/O
Power input connector
Power output connector
Power cord plug
Type
LED
Color
Photometrics
Quad-color (RGBW)
Parameter
Illuminance (8°) @ 5 m
Illuminance (33°) @ 5 m
Beam angle
Field angle
Strobe rate
Thermal Max. External Temperature
113 °F (45 °C)
DMX
I/O Connectors
Ordering
3- and 5-pin XLR
Product Name
Legend™ 412Z
100–240 VAC, 50/60 Hz
120 VAC, 60 Hz
185 W
1.5 A
13.6 A (9 products)
T 6.3 A, 250 V
U.S./Canada
Neutrik® powerCON® A
Neutrik® powerCON® B
Bare-wired
Power
10 W
Quantity
12
Standard Optics
3,880 lux
330 lux
8° to 33°
11° to 53°
0–20 Hz
Cooling System
Fan-Assisted Convection
Connector Type
Sockets
Item Code
06010780
Auto-ranging
230 VAC, 50 Hz
188 W
0.8 A
13.6 A (17 products)
T 6.3 A, 250 V
Worldwide
Neutrik® powerCON® A
Neutrik® powerCON® B
Bare-wired
Lifespan
50,000 hours
Current
2.9 A
Channel Range
15, 27, 31 or 34
UPC Number
781462211288
Legend™ 412Z User Manual Rev. 4 -21-
User Manual
C
ONTACT
U
S
Returns
You must send the product prepaid, in the original box, and with the original packing and accessories. Chauvet will not issue call tags.
Call Chauvet and request a Return Merchandise Authorization (RMA) number before shipping the product. Be prepared to provide the model number, serial number, and a brief description of the cause(s) for the return.
Clearly label the package with an RMA number. Chauvet will refuse any product returned without an RMA number.
DO NOT write the RMA number directly on the box. Instead, write it on a properly affixed label.
Once you have received the RMA number, include the following information on a piece of paper inside the box:
· Your name
· Your address
· Your phone number
· The RMA number
· A brief description of the problem(s)
Be sure to pack the product properly. Any shipping damage resulting from inadequate packaging will be the customer’s responsibility. FedEx packing or double-boxing are recommended.
Chauvet reserves the right to use its own discretion to repair or replace returned product(s).
WORLD HEADQUARTERS - Chauvet
General Information
Address: 5200 NW 108th Avenue
Sunrise, FL 33351
Technical Support
Voice: (954) 577-4455 (Press 4)
Fax: (954) 756-8015
Voice: (954) 577-4455
Fax: (954) 929-5560
Email: [email protected]
Toll free: (800) 762-1084 World Wide Web www.chauvetlighting.com
UNITED KINGDOM AND IRELAND - Chauvet Europe Ltd.
General Information Technical Support
Address: Unit 1C
Brookhill Road Industrial Estate
Pinxton, Nottingham, UK
NG16 6NT
Voice: +44 (0)1773 511115
Fax: +44 (0)1773 511110
MEXICO - Chauvet Mexico
General Information
Email: [email protected]
World Wide Web www.chauvetlighting.co.uk
Address: Av. Santa Ana 30
Parque Industrial Lerma
Lerma, Mexico C.P. 52000
Voice: +52 (728) 285-5000
CHAUVET EUROPE - Chauvet Europe BVBA
General Information
Address: Stokstraat 18
Technical Support
Email: [email protected]
World Wide Web www.chauvet.com.mx
Technical Support
Email: [email protected]
9770 Kruishoutem
Belgium World Wide Web www.chauvetlighting.eu
Voice: +32 9 388 93 97
Outside the U.S., United Kingdom, Ireland, Mexico, or Benelux contact the dealer of record.
Follow their instructions to request support or to return a product. Visit our website for contact details.
Legend™ 412Z User Manual Rev. 4
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 5 What Is Included
- 5 Claims
- 5 Manual Conventions
- 5 Symbols
- 6 Product At A Glance
- 6 Safety Notes
- 6 Personal Safety
- 6 Mounting And Rigging
- 6 Power And Wiring
- 6 Operation
- 6 Expected LED Lifespan
- 7 Description
- 7 Features
- 8 Overview
- 9 Dimensions
- 10 AC Power
- 10 AC Plug
- 10 Fuse Replacement
- 10 Power Linking
- 10 DMX Linking
- 10 DMX Modes
- 11 Mounting
- 11 Orientation
- 11 Rigging
- 11 Procedure
- 12 Control Panel Description
- 12 Control Options
- 12 Programming
- 12 Menu Map
- 14 Pan Inverse
- 14 Tilt Inverse
- 14 Back Light
- 14 Fixture Time
- 14 Software Version
- 14 Temperature
- 14 Static Color (Manual Test)
- 14 Reset
- 14 White Calibration
- 15 Auto Test
- 15 Fan Mode
- 15 DMX Personality
- 15 DMX Control
- 16 DMX Values
- 18 Legend™ 412Z Quadrants for DMX Control
- 24 Product Maintenance
- 26 Returns