- Home
- Home security & automation
- Security access control systems
- Chauvet
- Home Safety Product
- User manual
advertisement
Legend 412
Legend 412 VW
User Manual
Edition Notes
Edition Notes
The Legend™ 412 Series User Manual Rev. 5 covers the description, safety precautions, installation, programming, operation, and maintenance of the Legend™
412 and the Legend 412 VW. CHAUVET® released this edition of the Legend™ 412
Series User Manual in August 2012.
Trademarks
CHAUVET® is a registered trademark of CHAUVET & Sons Inc. (d/b/a CHAUVET® or Chauvet). The CHAUVET® logo in its entirety including the CHAUVET name and the dotted triangle, and all other trademarks in this manual pertaining to services, products, or marketing statements (example: It’s Green Thinking™) are owned or licensed by CHAUVET®. Any other product names, logos, brands, company names, and other trademarks featured or referred to within this document are the property of their respective trademark holders.
Copyright Notice
CHAUVET® owns the content of this user manual in its entirety, including but not limited to pictures, logos, trademarks, and resources.
© Copyright 2012 CHAUVET®. All rights reserved.
Electronically published by CHAUVET® in the United States of America.
Manual Usage
CHAUVET® authorizes its customers to download and print this manual for professional information purposes only. CHAUVET® expressly prohibits the usage, copy, storage, distribution, modification, or printing of this manual or its content for any other purpose without its written consent.
Document Printing
For better results, print this document in color, on letter size paper (8.5 x 11 inches), double sided. If using A4 paper (210 x 297 mm), configure your printer to scale the content accordingly.
Intended Audience
Any person in charge of installing, operating, and/or maintaining this product should completely read through the guide that shipped with the product, as well as this manual, before installing, operating, or maintaining this product.
Disclaimer
CHAUVET® believes that the information contained in this manual is accurate in all respects. However, CHAUVET® assumes no responsibility for any errors or omissions in this document. CHAUVET® reserves the right to revise and make changes to the content of this document without obligation that CHAUVET® notify any person or company of such revision or changes. This does not in any way constitute a commitment by CHAUVET® to make such changes. CHAUVET® may issue a revision of this manual or a new edition to incorporate such changes.
Document Revision
The Legend™ 412 Series User Manual Rev. 5 supersedes all previous versions of this manual. Discard any older versions of this manual you may have, whether in printed or electronic format, and replace with this version.
Author Date Editor Date
D. Couppe 12/30/11 S. Diaz 8/24/12
Legend™ 412 Series User Manual Rev. 5
Table of Contents
Table of Contents
1. Before You Begin ............................................................................................... 1
What Is Included ............................................................................................................ 1
Unpacking Instructions ................................................................................................... 1
Claims ................................................................................................................................... 1
Conventions ................................................................................................................... 1
Symbols ......................................................................................................................... 2
Product at a Glance ....................................................................................................... 2
Expected LED Lifespan .................................................................................................. 2
Safety Notes .................................................................................................................. 3
Personal Safety ...................................................................................................................... 3
Mounting and Rigging ............................................................................................................. 3
Power and Wiring ................................................................................................................... 3
Operation ............................................................................................................................... 3
2. Introduction ........................................................................................................ 4
Product Description ........................................................................................................ 4
Legend™ 412 Features .......................................................................................................... 4
Legend™ 412 VW Features .................................................................................................... 4
Product Overview ........................................................................................................... 5
Product Dimensions ....................................................................................................... 6
Product Dimensions (Cont.) ........................................................................................... 7
3. Setup ................................................................................................................... 8
AC Power ...................................................................................................................... 8
AC Plug ................................................................................................................................. 8
Fuse Replacement ................................................................................................................. 8
DMX Linking .................................................................................................................. 9
DMX Modes ........................................................................................................................... 9
Master/Slave Connectivity....................................................................................................... 9
Mounting .......................................................................................................................10
Orientation ........................................................................................................................... 10
Rigging ................................................................................................................................ 10
Procedure ............................................................................................................................ 10
Product Mounting Diagram ................................................................................................... 10
4. Operation .......................................................................................................... 11
Control Panel Description ..............................................................................................11
Control Options Legend 412 ................................................................................................. 11
Control Options Legend 412 VW ........................................................................................... 11
Programming ................................................................................................................11
DMX Personality................................................................................................................... 11
DMX Control ........................................................................................................................ 12
Static Color .......................................................................................................................... 12
Auto Programs ..................................................................................................................... 12
Master/Slave ........................................................................................................................ 13
Color Settings....................................................................................................................... 13
Blackout Mode ..................................................................................................................... 13
Display Mode ....................................................................................................................... 13
Pan Invert ............................................................................................................................ 13
Tilt Invert .............................................................................................................................. 13
Display Invert ....................................................................................................................... 13
LED Temperature ................................................................................................................. 14
CPU Temperature ................................................................................................................ 14
Product Hours ...................................................................................................................... 14
Software Version .................................................................................................................. 14
Self-Test .............................................................................................................................. 14
Legend™ 412 Series User Manual Rev. 5 -i-
Table of Contents
Reset ................................................................................................................................... 14
Factory Defaults ................................................................................................................... 14
Menu Map (Legend™ 412)............................................................................................15
Menu Map cont. (Legend™ 412) ...................................................................................16
Menu Map (Legend™ 412 VW) .....................................................................................17
Menu Map cont. (Legend™ 412 VW).............................................................................18
DMX Values (Legend™ 412) .........................................................................................19
12-Channel .......................................................................................................................... 19
28-Channel .......................................................................................................................... 20
28-Channel Cont. ................................................................................................................. 21
28-Channel Cont. ................................................................................................................. 22
DMX Values (Legend™ 412 VW) ..................................................................................23
10-Channel .......................................................................................................................... 23
20-Channel .......................................................................................................................... 24
20 Channel Cont. ................................................................................................................. 25
5. Technical Information ...................................................................................... 26
Product Maintenance ....................................................................................................26
Troubleshooting Guide ..................................................................................................27
Returns Procedure ........................................................................................................28
Contact Us ....................................................................................................................28
Technical Specifications Legend™ 412 .........................................................................29
Technical Specifications Legend™ 412 VW ..................................................................30
-ii- Legend™ 412 Series User Manual Rev. 5
Before You Begin
1. Before You Begin
What Is
Included
• One Legend™ 412 or Legend™ 412 VW
• One Eye Bolt (for safety cable)
• One Omega Bracket with M12 Bolts
Unpacking
Instructions
Claims
• Warranty Card
• Quick Reference Guide
Immediately upon receiving this product, carefully unpack and check the container. Make sure you have received all the parts indicated above and all the parts are in good condition.
Conventions
If the container or the material inside the container (the product and included accessories) appear damaged from shipping, or show signs of mishandling, upon receipt notify the carrier immediately, not CHAUVET®. Failure to notify the carrier in a timely manner may invalidate your claim. In addition, keep the container and all the packing material for inspection.
For other issues such as missing components or parts, damage not related to shipping, or concealed damage, file a claim with CHAUVET® within 7 days of receiving the merchandise.
Refer to the Contact Us section in this manual for addresses and phone numbers.
Convention
1~512
Meaning
A range of values in the text
50/60 A set of mutually exclusive values in the text
Claims
A new term, another document reference, or section or chapter in this document
<SET>
Settings
A button on the product’s control panel
A product function or a menu option
MENU > Settings A sequence of menu options
1~10
Yes/No
ON
A range of menu values from which to choose in a menu
A set of two mutually exclusive menu options in a menu
A unique value to be entered or selected in a menu
Legend™ 412 Series User Manual Rev. 5 -1-
Before You Begin
Symbols
Symbol Meaning
Critical installation, configuration, or operation information. Failure to comply with this information may render the product partially or completely inoperative, damage third-party equipment, or cause harm to the user.
Important installation or configuration information. Failure to comply with this information may prevent the product from functioning correctly.
Product at a
Glance
Useful information.
The term “DMX” used throughout this manual refers to the USITT DMX512-A transmission protocol.
Use on Dimmer
Outdoor Use
Sound Activated
DMX
Master/Slave
Auto Programs
Auto-ranging Power Supply
Replaceable Fuse
User Serviceable
Duty Cycle
Expected LED
Lifespan
LEDs gradually decline in brightness over time, mostly because of heat. Packaged in clusters, LEDs exhibit higher operating temperatures than in ideal, single LED conditions.
For this reason, using clustered LEDs at their fullest intensity significantly reduces the
LEDs’ lifespan. Under normal conditions, this lifespan can be 40,000 to 50,000 hours. If extending this lifespan is vital, lower the operational temperature by improving the product’s ventilation and reducing the ambient temperature to an optimal operating temperature. In addition, limiting the overall projection intensity may also help to extend the LEDs’ lifespan.
-2- Legend™ 412 Series User Manual Rev. 5
Before You Begin
Safety Notes
Mounting and
Rigging
Power and Wiring
Operation
Personal Safety
Read all the following Safety Notes before working with this product. These Notes include important information about the installation, usage, and maintenance of this product.
There are no user-serviceable parts in this product. Any reference to servicing in this User Manual applies only to properly certified CHAUVET® technicians. Do not open the housing or attempt any repairs unless you are certified.
Please refer to all applicable local codes and regulations for the proper installation of this product.
• Avoid direct eye exposure to the light source while the product is on.
• Always disconnect this product from its power source before servicing.
• Always connect this product to a grounded circuit to avoid the risk of electrocution.
• Do not touch this product’s housing when operating because it may be very hot.
• This product is for indoor use only! To prevent risk of fire or shock, do not expose this product to rain or moisture.
• Make sure there are no flammable materials close to this product while operating.
• When hanging this product, always secure it to a fastening device using a safety cable
(not included).
• Do not carry this product from the head. Always use the base.
• Always make sure you are connecting this product to the proper voltage, as per the specifications in this manual or on the product’s specification label.
• Never connect this product to a dimmer pack or rheostat.
• Never disconnect this product by pulling or tugging on the power cable.
• Do not operate this product if you see damage on the housing, lenses or cables. Have the damaged parts replaced by an authorized technician at once.
• Do not cover the ventilation slots when operating to avoid internal overheating.
• The maximum ambient temperature is 104° F (40° C). Do not operate this product at a higher temperature.
• In case of a serious operating problem, stop using this product immediately!
In the unlikely event that your CHAUVET® product may require service, contact
CHAUVET® Technical Support.
Legend™ 412 Series User Manual Rev. 5 -3-
Introduction
2. Introduction
Product
Description
The Legend™ 412 Series consists of high power LED moving head wash products with 4 independent quadrants of control. It is available in a RGBW version or a VW (variable white) version with quad color LEDs. The product consists of a base and a moving head on a yoke. A Top Hat is pre-installed to reduce glare, creating a flat field of light.
Legend™ 412
Features
• 12- or 28-channel RGBW quad color LED moving yoke wash product
• Pan: 630°
• Tilt: 200°
• RGBW quad color mixing with or without DMX controller
• Fast movement
• Bright quad color LEDs
• Strobe macros with quadrant strobe
Legend™ 412 VW
Features
• Flicker free operation for HD cameras
• 10- or 20-channel VW quad color LED moving yoke wash product
• Pan: 630°
• Tilt: 200°
• VW quad color mixing with or without DMX controller
• Fast movement
• Bright quad color LEDs
• Strobe macros with quadrant strobe
• Fast movement
• Flicker-free operation for HD cameras
-4- Legend™ 412 Series User Manual Rev. 5
Introduction
Product Overview
Rear View
Front View
Legend™ 412 Series User Manual Rev. 5
DMX In/Out
Power/Fuse
Control Panel
Side View
-5-
Introduction
Product Dimensions
12.0 in
304 mm
3.1 in
80 mm
11.2 in
285 mm
10.6 in
269 mm
-6-
6.5 in
165 mm
7.2 in
182 mm
10.1 in
257 mm
Legend™ 412 Series User Manual Rev. 5
Product Dimensions (Cont.)
Legend™ 412 Series User Manual Rev. 5
4.5 in
114 mm
5.5 in
140 mm
3.5 in
89 mm
Introduction
-7-
Setup
3. Setup
AC Power
AC Plug
The Legend™ 412 Series has an auto-ranging power supply that works with an input voltage range of 100~240 VAC, 50/60 Hz.
Make sure that you are connecting this product to the proper voltage. To determine the power requirements for the Legend™ 412 Series, refer to the specification label affixed to the product or the specifications in this manual.
Always connect this product to a protected circuit with an appropriate electrical ground to avoid the risk of electrocution or fire.
The listed current rating indicates the maximum current draw during normal operation. For more information, download Sizing the Circuit Breakers from www.chauvetpro.com
.
Never connect this product to a rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer channel serves only as a 0 to 100% switch.
The Legend™ 412 Series should be used with a power input cord terminated with an IEC connector on one end and an Edison plug on the other end (U.S. market). Use the table below to wire a new plug if needed.
Connection Wire (U.S.) Wire (Europe) Screw Color
AC Live
AC Neutral
Black
White
Brown
Blue
Yellow or Brass
Silver
Fuse Replacement
AC Ground Green/Yellow Green/Yellow Green
Make sure to disconnect the product’s power cord before replacing a blown fuse, and always replace it with a fuse of the same type and rating.
This product uses a T 3.15 A, 250 V fuse.
1. Disconnect the product from the power outlet.
2. Using a flat head screwdriver, wedge the tip into the slot of the fuse holder.
3. Pry the safety cap out of the housing to pull out the installed fuse.
4. Remove the blown fuse from the safety cap and replace with a fuse of the exact same type and rating (T 3.15 A, 250 V).
5. Insert the fuse holder back in place and reconnect power.
Spare fusel
(inside safety cap)
Installed fuse
(held by plastic clip)
Safety cap
This product ships with a spare fuse inside the safety cap, as shown above.
-8- Legend™ 412 Series User Manual Rev. 5
Setup
DMX Linking
DMX Modes
Master/Slave
Connectivity
You can link the Legend™ 412 Series to a DMX controller using a standard 5-pin DMX serial connection. If using other DMX compatible products with the Legend™ 412 Series, you can control each individually with a single DMX controller.
The Legend™ 412 Series uses the standard 5-pin DMX data connection for its ADVANCED and BASIC DMX personalities.
Refer to the Introduction chapter for a brief description of these modes.
Refer to the Operation chapter to learn how to configure the Legend™ 412 Series to work in these modes.
The DMX Values section will provide you with detailed information regarding the DMX modes.
The Master/Slave mode allows a Legend™ 412 or a Legend™ 412 VW (the “master unit”) to control one or more Legend™ 412’s or Legend™ 412 VW’s (the “slave units”) without a
DMX controller. The product becomes the master unit when set in master mode via the control panel. You must configure the slave units to operate in one of the two (2) slave modes from their respective control panels. During the Master/Slave operation, the slave units will operate in unison with the master unit or run offset depending on the slave mode chosen.
Do not connect a Legend™ 412 together with a Legend™ 412 VW in Master/Slave mode.
If you are not familiar with or need more information about DMX standards, master/slave connectivity, or the DMX cables needed to link this product to a DMX controller, download the DMX Primer from the CHAUVET® website: www.chauvetpro.com
DO NOT connect a DMX controller to the products operating in Master/Slave mode.
The DMX controller signals may interfere with the signals from the master product.
The Operation chapter of this manual provides detailed instructions on how to configure the Master and Slave products.
Legend™ 412 Series User Manual Rev. 5 -9-
Setup
-10-
Mounting
Orientation
Rigging
Before mounting this product, read and follow the Safety Notes in this manual.
Always mount this product in any safe position making sure there is adequate room for ventilation, configuration, and maintenance.
CHAUVET® recommends using the following general guidelines when mounting this product.
Procedure
Product Mounting
Diagram
• When selecting an installation location, consider easy access to this product for operation, programming adjustments, and routine maintenance.
• Make sure to mount this product away from any flammable material as indicated in the
Safety Notes section.
• Never mount the product in places where rain, high humidity, extreme temperature changes, or restricted ventilation may affect it.
• If hanging this product, make sure that the mounting location can support the product’s weight. Refer to the Technical Specifications section for the weight requirement of this product.
The Legend™ 412 Series comes with 1 omega bracket, which attaches to the bottom of the product via M12 Allen bolts. This allows you to attach a single clamp to hang the product. You may also attach 2 clamps directly to the fixture via the same 2 M12 mounting screw holes. You must supply your own clamps and make sure the clamps are capable of supporting the weight of this product.
Safety Cable
Bracket
Legend™ 412 Series User Manual Rev. 5
Operation
4. Operation
Control Panel
Description
Button Function
<MENU> Exits from the current menu or function
<UP>
Navigates upward through the menu list and increases the numeric value when in a function
Control Options
Legend 412
<DOWN>
Navigates downward through the menu list and decreases the numeric value when in a function
You can set the Legend™ 412 start address in the 001~512 DMX range. This enables control of up to 18 units in the 28 channel ADVANCED personality.
Control Options
Legend 412 VW
Programming
You can set the Legend™ 412 VW start address in the 001~512 DMX range. This enables control of up to 25 units in the 20 channel ADVANCED personality.
Refer to the Menu Map to understand the menu options. The menu map has a Menu Level and a variable number of programming levels for each option.
DMX Personality
• To go to an option in the Menu Level, press <MENU> repeatedly until the option shows on the display. Press <ENTER> to select. This will take you to the first programming level for that option.
• To select an option or value within the current programming level, press <UP> or
<DOWN> until the option shows on the display. Press <ENTER> to select. In this case, if there is another programming level, you will see that first option, or you will see the selected value.
• To exit to the previous menu level, press <MENU>.
This setting allows you to choose a particular DMX personality.
1. Go to Chnd and press <ENTER>.
2. Select the desired personality based on the product.
• Legend™ 412:
Select 12Ch (Basic) or 28Ch (Advanced)
• Legend™ 412 VW:
Select 10Ch (Basic) or 20Ch (Advanced)
• See the DMX Values section for the highest starting address you can select for each personality.
• Make sure that the starting addresses on the various products do not overlap due to the new personality setting. See the DMX Values section.
Legend™ 412 Series User Manual Rev. 5 -11-
Operation
DMX Control
Static Color
Auto Programs
In this mode, each product will respond to a unique starting address from the DMX controller. All products with the same starting address will respond in unison.
1. Select a DMX personality as shown in the DMX Personality section.
2. Set the starting address: a. Go to Addr and press <ENTER>. b. Select the starting address ( 001~512).
The highest recommended starting address for each DMX mode are as follows:
Legend™ 412 Legend™ 412 VW
DMX Mode DMX Address DMX Mode DMX Address
Advanced
Basic
485
501
Advanced
Basic
493
503
The Static mode allows for permanent positioning, strobing, dimming, and RGBW or VW color mixing without a DMX controller.
1. Go to NAnu and press <ENTER>.
2. Select the desired position ( Pan or tILt).
3. Select the desired position value ( 0~255).
4. Repeat for the other position.
5. Select the desired color based on the product.
• Legend™ 412:
Red1~4, Gre1~4, bLu1~4, or UhI1~4.
• Legend™ 412 VW:
UU1~4, or CU1~4.
6. Select the desired color value ( 0~255).
7. Repeat for the other colors.
8. Select the desired intensity ( dINN).
9. Select the desired intensity value ( 0~255).
10. Select Strobe effect ( Stro).
11. Select the desired frequency ( 0~255).
Auto programs allow for dynamic RGBW (Legend™ 412) or VW (Legend™ 412 VW) color mixing without a DMX controller.
1. Go to Shnd and press <ENTER>.
2. Select the desired auto program ( Sh 1~4).
You cannot edit any of the auto programs (Sh 1~4).
-12- Legend™ 412 Series User Manual Rev. 5
Operation
Master/Slave
The Master/Slave mode allows a group of Legend™ 412’s or Legend™ 412 VW’s (the slave units) to simultaneously duplicate the output of another Legend™ 412 or Legend™
412 VW (the master unit) without a DMX controller.
1. Set each of the slave units: a. Go to SLNd and press <ENTER>. b. Select SL 1 (duplicates the master unit exactly) or SL 2 (offsets pan and tilt settings that creates a different look).
2. Set the master unit: a. Go to SLNd and press <ENTER>. b. Select NASt. c. Go to ShNd and press <ENTER>. d. Select the desired auto program ( Sh 1~4).
Do not connect a Legend™ 412 together with a Legend™ 412 VW in Master/Slave mode.
Color Settings
(Legend™ 412 Only)
• The master unit is the one that runs an auto program.
• Do not connect a DMX controller to the units configured for Master/Slave operation.
• The master unit should be the first unit in the DMX daisy string.
The color setting determines how the Legend™ 412 generates the white color based on various RGB settings.
1. Go to bALA and press <ENTER>.
2. Select red, Gree, or bLue.
3. Select the desired color value ( 125~255).
4. Repeat for the other colors.
Blackout Mode
This setting determines whether the Legend™ 412 or the Legend™ 412 VW starts playing an auto program when powered up or remains static in the “Home” position.
1. Go to bLnd and press <ENTER>.
2. Select YeS or no.
Display Mode
This setting determines whether the control panel display stays on indefinitely or turns off after 2 minutes of inactivity.
1. Go to Led and press <ENTER>.
2. Select YeS or no.
Pan Invert This setting allows the user to invert the direction of the pan control.
1. Go to PAn and press <ENTER>.
2. Select YeS or no.
Tilt Invert
This setting allows the user to invert the direction of the tilt control.
1. Go to tILt and press <ENTER>.
2. Select YeS or no.
Display Invert
This setting allows the user to invert the direction of the control panel display.
1. Go to Led and press <ENTER>.
2. Select on or oFF.
Legend™ 412 Series User Manual Rev. 5 -13-
Operation
LED Temperature
CPU Temperature
Product Hours
Software Version
Self-Test
Reset
Factory Defaults
This option allows the user to view the LED temperature (C°) of the Legend™ 412 or the
Legend™ 412 VW.
1. Go to Ledt.
2. Press <ENTER>.
This option allows the user to view the CPU temperature (C°) of the Legend™ 412 or the
Legend™ 412 VW.
1. Go to CPut.
2. Press <ENTER>.
This option shows the user the amount of hours the Legend™ 412 or the Legend™ 412
VW has been in use throughout its lifetime.
1. Go to FhrS.
2. Press <ENTER>.
This option shows the user the software version currently installed in the Legend™ 412 or the Legend™ 412 VW.
1. Go to ver.
2. Press <ENTER>.
This setting allows the user to set the Legend™ 412 or the Legend™ 412 VW to the self-test mode.
1. Go to teSt.
2. Press <ENTER>.
This setting allows the user to reset the Legend™ 412 or the Legend™ 412 VW to the
“Home” position.
1. Go to rSet.
2. Press <ENTER>.
This setting allows the user to set the Legend™ 412 or the Legend™ 412 VW to the original factory default settings.
1. Go to Prod and press <ENTER>.
2. Select YeS or no.
-14- Legend™ 412 Series User Manual Rev. 5
Operation
Menu Map (Legend™ 412)
Main Level Programming Levels
Addr
Chnd
SLnd
Shnd bLnd
1~512
12Ch
28Ch
NASt
SL 1
SL 2
Sh 1
Sh 2
Sh 3
Sh 4
YeS no on
Led
PAn tILt dISP oFF
YeS no
YeS no on oFF bALA red
Gree bLue
125~255
Description
Sets the DMX starting address
Sets the 12 channel personality
Sets the 28 channel personality
Sets product to Master in Slave mode
Sets product to Slave 1 in Slave mode
Sets product to Slave 2 in Slave mode
Sets the Auto program
Selects whether Blackout mode is active
Selects whether the display stays on indefinitely or turns off after 2 minutes of inactivity
Pan is inverted
Pan is normal
Tilt is inverted
Tilt is normal
Display is inverted
Display is normal
Set White Balance
-Continued on next page-
Legend™ 412 Series User Manual Rev. 5 -15-
Operation
Menu Map cont. (Legend™ 412)
Main Level Programming Levels
Pan tILt
NAnu bLu2
UhI2
Red3
Gre3 bLu3
UhI3
Red1
Gre1 bLu1
UhI1
Red2
Gre2
Red4
Gre4 bLu4
UhI4 dINN
Stro
0~255 teSt
Ledt
CPut
FhrS ver
Prod rSet
N/A
N/A
N/A
N/A
N/A
YeS no
N/A
Description
Sets Pan 0~630°
Sets Pan 0~200°
Sets Quadrant 1 Red LED intensity
Sets Quadrant 1 Green LED intensity
Sets Quadrant 1 Blue LED intensity
Sets Quadrant 1 White LED intensity
Sets Quadrant 2 Red LED intensity
Sets Quadrant 2 Green LED intensity
Sets Quadrant 2 Blue LED intensity
Sets Quadrant 2 White LED intensity
Sets Quadrant 3 Red LED intensity
Sets Quadrant 3 Green LED intensity
Sets Quadrant 3 Blue LED intensity
Sets Quadrant 3 White LED intensity
Sets Quadrant 4 Red LED intensity
Sets Quadrant 4 Green LED intensity
Sets Quadrant 4 Blue LED intensity
Sets Quadrant 4 White LED intensity
Sets dimmer intensity for all LEDs
Sets strobe rate 0~30 Hz
Runs Self-test program
Shows LED temperature (C°)
Shows CPU temperature (C°)
Shows fixture hours
Shows software version
Reset product to factory default
Resets product to “Home” Position
-16- Legend™ 412 Series User Manual Rev. 5
Operation
Menu Map (Legend™ 412 VW)
Main Level Programming Levels
Addr
Chnd
1~512
10Ch
SLnd
20Ch
NASt
SL 1
Shnd bLnd
SL 2
Sh 1
Sh 2
Sh 3
Sh 4
YeS no on
Led oFF
PAn tILt dISP
YeS no
YeS no on oFF
-Continued on next page-
Description
Sets the DMX starting address
Sets the 10 channel personality
Sets the 20 channel personality
Sets product to Master in Slave mode
Sets product to Slave 1 in Slave mode
Sets product to Slave 2 in Slave mode
Sets the Show mode
Selects whether Blackout mode is active
Selects whether the display stays on indefinitely or turns off after 2 minutes of inactivity
Pan is inverted
Pan is normal
Tilt is inverted
Tilt is normal
Display is inverted
Display is normal
Legend™ 412 Series User Manual Rev. 5 -17-
Operation
Menu Map cont. (Legend™ 412 VW)
Main Level Programming Levels
Pan tILt
NAnu
UU1
CU1
UU2
CU2
UU3
CU3
UU4
CU4 dINN
Stro teSt
Ledt
CPut
FhrS ver
Prod rSet
N/A
N/A
N/A
N/A
N/A
YeS no
N/A
0~255
Description
Sets Pan 0~630°
Sets Pan 0~200°
Quadrant 1 warm white LED intensity
Quadrant 1 cool white LED intensity
Quadrant 2 warm white LED intensity
Quadrant 2 cool white LED intensity
Quadrant 3 warm white LED intensity
Quadrant 3 cool white LED intensity
Quadrant 4 warm white LED intensity
Quadrant 4 cool white LED intensity
Sets dimmer intensity for all LEDs
Strobe rate 0~30 Hz
Runs Self-test program
Shows LED temperature (C°)
Shows CPU temperature (C°)
Shows fixture hours
Shows software version
Reset product to factory default
Resets product to “Home” Position
-18- Legend™ 412 Series User Manual Rev. 5
Operation
DMX Values (Legend™ 412)
12-Channel
(Basic Mode)
Channel
3
4
1
2
5
6
Function
Pan
Pan Fine
Tilt
Tilt Fine
Pan/Tilt Speed
Dimmer
7 Strobe
8
9
10
11
Red
Green
Blue
White
12 Control
Value Percent/Setting
000 255 0~100%
000 255 0~100%
000 255 0~100%
000 255 0~100%
000 255 0~100%
000 255 0~100%
000 019
020 039
040 059
060 079
080 099
100 119
120 139
140 159
160 179
180 199
200 219
220 255
000 007
008 069
070 129
130 190
191 205
206 221
222 236
237 255
Open
Strobe 0~30 Hz
Strobe Macro 1
Strobe Macro 2
Strobe Macro 3
Strobe Macro 4
Strobe Macro 5
Strobe Effect 1
Strobe Effect 2
Strobe Effect 3
Strobe Effect 4
Open Full
000 255 0~100%
000 255 0~100%
000 255 0~100%
000 255 0~100%
Note: Speed will vary dependent on value within the strobe effect/macro.
No function
Reset Pan/Tilt
Reset All
Move in Black
Reserved for future use
Reserved for future use
Reserved for future use
Reserved for future use
Legend™ 412 Series User Manual Rev. 5 -19-
Operation
28-Channel
(Advanced Mode)
Channel
3
4
1
2
5
6
Function
Pan
Pan Fine
Tilt
Tilt Fine
Pan/Tilt Speed
Dimmer
7
20
21
22
23
16
17
18
19
12
13
14
15
8
9
10
11
Strobe
Red Quad 1
Green Quad 1
Blue Quad 1
White Quad 1
Red Quad 2
Green Quad 2
Blue Quad 2
White Quad 2
Red Quad 3
Green Quad 3
Blue Quad 3
White Quad 3
Red Quad 4
Green Quad 4
Blue Quad 4
White Quad 4
Value
000 255 0~100%
000 255 0~100%
000 255 0~100%
000 255 0~100%
000 255 0~100%
000 255 0~100%
000 019
020 039
040 059
060 079
080 099
100 119
120 139
140 159
160 179
180 199
200 219
220 255
000 255 0~100%
000 255 0~100%
000 255 0~100%
Open
Strobe 0~30 Hz
Strobe Macro 1
Strobe Macro 2
Strobe Macro 3
Strobe Macro 4
Strobe Macro 5
Strobe Effect 1
Strobe Effect 2
Strobe Effect 3
Strobe Effect 4
Open Full
000 255 0~100%
000 255 0~100%
000 255 0~100%
000 255 0~100%
000 255 0~100%
000 255 0~100%
000 255 0~100%
000 255 0~100%
000 255 0~100%
000 255 0~100%
000 255 0~100%
000 255 0~100%
000 255 0~100%
Percent/Setting
Note: Speed will vary dependent on value within the strobe effect/macro.
-20- Legend™ 412 Series User Manual Rev. 5
28-Channel Cont.
(Advanced Mode)
Channel
24
25
26
Function
Color Macros
Color Macro Speed
Pan/Tilt Macro
128 135
136 143
144 151
152 159
160 167
168 175
176 183
184 191
192 199
200 207
208 215
216 223
224 231
232 239
240 247
248 255
000 007
008 015
016 023
024 031
032 039
040 047
048 055
056 063
064 071
072 079
080 087
088 095
096 103
104 111
112 119
120 127
Value
000 019
020 029
030 039
040 049
050 059
060 069
070 079
080 089
090 099
100 109
110 119
120 129
130 139
140 149
150 159
160 169
170 179
180 189
190 199
200 209
210 219
220 229
230 239
240 255
No Function
Macro 1
Macro 2
Macro 3
Macro 4
Macro 5
Macro 6
Macro 7
Macro 8
Macro 9
Macro 10
Macro 11
Macro 12
Macro 13
Macro 14
Macro 15
Macro 16
Macro 17
Macro 18
Macro 19
Macro 20
Macro 21
Macro 22
Macro 23
000 255 0~100%
Macro 16
Macro 17
Macro 18
Macro 19
Macro 20
Macro 21
Macro 22
Macro 23
Macro 24
Macro 25
Macro 26
Macro 27
Macro 28
Macro 29
Macro 30
Macro 31
No Function
Macro 1
Macro 2
Macro 3
Macro 4
Macro 5
Macro 6
Macro 7
Macro 8
Macro 9
Macro 10
Macro 11
Macro 12
Macro 13
Macro 14
Macro 15
Legend™ 412 Series User Manual Rev. 5
Percent/Setting
Operation
-21-
Operation
28-Channel Cont.
(Advanced Mode)
Channel
27
28
Function Value
Pan/Tilt Macro Speed 000 255 0~100%
Control
000 007
008 069
070 129
130 190
191 205
206 221
222 236
237 255
No function
Reset Pan/Tilt
Reset All
Move in Black
Percent/Setting
Reserved for future use
Reserved for future use
Reserved for future use
Reserved for future use
-22- Legend™ 412 Series User Manual Rev. 5
Operation
DMX Values (Legend™ 412 VW)
10-Channel
(Basic Mode)
Channel Function
3
4
1
2
5
6
Pan
Pan Fine
Tilt
Tilt Fine
Pan/Tilt Speed
Dimmer
7 Strobe
8
9
Warm White
Cool White
10 Control
Value Percent/Setting
000 255 0~100%
000 255 0~100%
000 255 0~100%
000 255 0~100%
000 255 0~100%
000 255 0~100%
000 019
020 039
040 059
060 079
080 099
100 119
120 139
140 159
160 179
180 199
200 219
220 255
Open
Strobe 0~30 Hz
Strobe Macro 1
Strobe Macro 2
Strobe Macro 3
Strobe Macro 4
Strobe Macro 5
Strobe Effect 1
Strobe Effect 2
Strobe Effect 3
Strobe Effect 4
Open Full
Note: Speed will vary dependent on value within the strobe effect/macro.
000 255 0~100%
000 255 0~100%
000 007
008 069
070 129
130 190
191 205
206 221
222 236
237 255
No function
Reset Pan/Tilt
Reset All
Move in Black
Reserved for future use
Reserved for future use
Reserved for future use
Reserved for future use
Legend™ 412 Series User Manual Rev. 5 -23-
Operation
20-Channel
(Advanced Mode)
Channel
3
4
1
2
5
6
7
16
17
Function Value
Pan
Pan Fine
Tilt
Tilt Fine
Pan/Tilt Speed
Dimmer
Strobe
000 255 0~100%
000 255 0~100%
000 255 0~100%
000 255 0~100%
000 255 0~100%
000 255 0~100%
000 019
020 039
040 059
060 079
080 099
100 119
120 139
140 159
160 179
180 199
200 219
220 255
Open
Strobe 0~30 Hz
Strobe Macro 1
Strobe Macro 2
Strobe Macro 3
Strobe Macro 4
Strobe Macro 5
Strobe Effect 1
Strobe Effect 2
Strobe Effect 3
Strobe Effect 4
Open Full
Warm White Quad 1 000 255 0~100%
Cool White Quad 1 000 255 0~100%
Warm White Quad 2 000 255 0~100%
Cool White Quad 2
Warm White Quad 3
Cool White Quad 3
Warm White Quad 4
Cool White Quad 4
000 255 0~100%
000 255 0~100%
000 255 0~100%
000 255 0~100%
Color Macros
000 255 0~100%
000 019
020 029
030 039
040 049
050 059
060 069
070 079
080 089
090 099
100 109
110 119
120 129
130 139
140 149
150 159
Color Macro Speed
160 169
170 179
180 189
190 199
200 209
210 219
220 229
230 239
240 255
No Function
Macro 1
Macro 2
Macro 3
Macro 4
Macro 5
Macro 6
Macro 7
Macro 8
Macro 9
Macro 10
Macro 11
Macro 12
Macro 13
Macro 14
Macro 15
Macro 16
Macro 17
Macro 18
Macro 19
Macro 20
Macro 21
Macro 22
Macro 23
000 255 0~100%
Percent/Setting
Note: Speed will vary dependent on value within the strobe effect/macro.
12
13
14
15
8
9
10
11
-24- Legend™ 412 Series User Manual Rev. 5
20 Channel Cont.
(Advanced Mode)
Channel
18
19
20
Function
Pan/Tilt Macro
120 127
128 135
136 143
144 151
152 159
160 167
168 175
176 183
184 191
192 199
200 207
208 215
216 223
224 231
232 239
240 247
Value
000 007
008 015
016 023
024 031
032 039
040 047
048 055
056 063
064 071
072 079
080 087
088 095
096 103
104 111
112 119
Macro 16
Macro 17
Macro 18
Macro 19
Macro 20
Macro 21
Macro 22
Macro 23
Macro 24
Macro 25
Macro 26
Macro 27
Macro 28
Macro 29
Macro 30
Macro 31
No Function
Macro 1
Macro 2
Macro 3
Macro 4
Macro 5
Macro 6
Macro 7
Macro 8
Macro 9
Macro 10
Macro 11
Macro 12
Macro 13
Macro 14
Macro 15
Percent/Setting
248 255
Pan/Tilt Macro Speed 000 255 0~100%
Control
000 007
008 069
070 129
130 190
191 205
206 221
222 236
237 255
No function
Reset Pan/Tilt
Reset All
Move in Black
Reserved for future use
Reserved for future use
Reserved for future use
Reserved for future use
Operation
Legend™ 412 Series User Manual Rev. 5 -25-
Technical Information
5. Technical Information
Product
Maintenance
To maintain optimum performance and minimize wear, clean this product frequently.
Usage and environment are contributing factors in determining the cleaning frequency.
As a rule, clean this product at least twice a month. Dust build-up reduces light output performance and can cause overheating. This can lead to reduced light source life and increased mechanical wear.
To clean a product, follow the recommendations below:
• Unplug the unit from power.
• Wait until the unit has cooled.
• Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the external vents and accessible internal components.
• Clean all external optics and plastic surfaces with a mild solution of non-ammonia glass cleaner or isopropyl alcohol.
• Apply the solution directly to a soft, lint-free cotton cloth or a lens cleaning tissue.
• Wipe any dirt or grime to the outside edge of the lens surface.
• Gently polish the lens surfaces until they are free of haze and lint.
Always dry the external optics and plastic surfaces carefully after cleaning them.
Refrain from spinning this product’s fan using compressed air.
-26- Legend™ 412 Series User Manual Rev. 5
Technical Information
Troubleshooting Guide
Symptom
Product does not light up
One of the LEDs does not work
Cause(s)
Dimmer fader set to “0”
All color faders set to “0”
All colors in Static mode are set to “0”
No power
Faulty internal power supply
Faulty main control board
Faulty LED
Faulty LED module
Faulty LED driver
Two or more LEDs do not work on a single module
The wrong LEDs light up when using DMX
Circuit breaker/fuse keeps tripping/blowing
Faulty LED module
Faulty LED driver
Wrong personality
Wrong DMX address
Excessive circuit load
Short circuit along the power wires
Unit does not power up
Unit does not respond to wired DMX or responds erratically
Action(s)
Increase the value of the dimmer channel
Increase the value of the color channels
Increase the values of the colors
Verify external power circuit and wiring
Send unit for repair
Send unit for repair
Send unit for repair
No power
Loose or damaged power cord
Blown fuse
Faulty internal power supply
Change the personality
Change the DMX address
Reduce total load placed on the electrical circuit
Check electrical wiring
Check for voltage on outlet
Check power cord
Replace fuse
Send unit for repair
Wrong DMX addressing
Damaged DMX cables
Wrong polarity on the controller
Loose DMX cables
Non DMX cables
Bouncing signals
Check unit addressing
Check DMX cables
Check polarity switch settings on the controller
Check cable connections
Use only DMX compatible cables
Long cable / low level signal
Install terminator as suggested
Install an optically coupled DMX splitter before a long section of cable or right after the unit with the strong signal
Too many units
Interference from AC wires
Install an optically coupled DMX splitter after unit
#32
Keep DMX cables separated from power cables or fluorescent/black lights
Faulty Display/Main/DMX interface board Send unit for repair
Faulty Display/Main board Send unit for repair
If you have technical problems after trying the solutions provided, contact
CHAUVET® Technical Support .
Legend™ 412 Series User Manual Rev. 5 -27-
Technical Information
Returns
Procedure
You must send the merchandise prepaid, in the original box, and with the original packing and accessories. CHAUVET® will not issue call tags.
Call CHAUVET® and request a Return Merchandise Authorization (RMA) number before shipping the product. Be prepared to provide the model number, serial number, and a brief description of the cause for the return.
Clearly label the package with an RMA number. CHAUVET® will refuse any product returned without an RMA number.
DO NOT write the RMA number directly on the box. Instead, write it on a properly affixed label.
Once you have received the RMA number, include the following information on a piece of paper inside the box:
• Your name
• Your address
• Your phone number
• The RMA number
• A brief description of the problem
Be sure to pack the product properly. Any shipping damage resulting from inadequate packaging will be the customer’s responsibility. FedEx packing or double boxing are recommended.
Contact Us
CHAUVET® reserves the right to use its own discretion to repair or replace returned product(s).
World Headquarters United Kingdom & Ireland
CHAUVET® CHAUVET® Europe Ltd.
General Information
Address:
Voice:
Fax:
Toll free:
General Information
Address:
Voice:
Fax:
Unit 1C
Brookhill Road Industrial Estate
Pinxton, Nottingham, UK
NG16 6NT
+44 (0)1773 511115
+44 (0)1773 511110
5200 NW 108th Avenue
Sunrise, FL 33351
(954) 929-1115
(954) 929-5560
(800) 762-1084
Technical Support
Voice:
Fax:
Email:
(954) 929-1115 (Press 4)
(954) 756-8015 [email protected]
Technical Support
Email: [email protected]
World Wide Web World Wide Web www.chauvetpro.com
www.chauvetlighting.co.uk
Outside the U.S., United Kingdom, or Ireland, contact your distributor of record. Follow their instructions to request support or to return a product. Visit our website for contact details.
-28- Legend™ 412 Series User Manual Rev. 5
Technical Information
Technical Specifications Legend™ 412
Dimensions and
Weight
Length
5.5 in (140 mm)
Width
10.1 in (257 mm)
Height
12.0 in (304 mm)
Electrical
Note: Dimensions in inches rounded to the nearest decimal digit.
Power Supply Type Range
Switching (internal) 100~240 V, 50/60 Hz
Parameter
Consumption
120 V, 60 Hz
144 W
Operating current 1.8 A
Fuse
Power I/O
T 3.15 A, 250 V
US/Worldwide
Light Source
Photo Optic
Thermal
DMX
Ordering
Power input connector
Power output connector
Power cord plug
Type
LED
Color
Quad Color
Parameter
Illuminance @ 5 m
Beam angle
Field angle
Max. External Temperature
104° F (40° C)
I/O Connectors
5-pin XLR
Product Name
Legend™ 412
IEC
N/A
Edison (US)
Power
10 W
Quantity
12
Standard Optics
1,500 lx
12.0º
23.0º
Cooling System
Convection
Connector Type
Sockets
Item Code
06010406
Weight
10.1 lbs (4.58 kg)
Voltage Selection
Auto-ranging
230 V, 50 Hz
139 W
.5 A
T 3.15 A, 250 V
Europe
IEC
N/A
Local plug
Lifespan
50,000 hours
Current
700 mA (per die)
Channel Range
12,28
UPC Number
781462207588
Legend™ 412 Series User Manual Rev. 5 -29-
Technical Information
-30-
Technical Specifications Legend™ 412 VW
Dimensions and
Weight
Length
5.5 in (140 mm)
Width
10.1 in (257 mm)
Height
12.0 in (304 mm)
Electrical
Note: Dimensions in inches rounded to the nearest decimal digit.
Power Supply Type Range
Switching (internal) 100~240 V, 50/60 Hz
Parameter
Consumption
120 V, 60 Hz
165 W
Operating current 1.4 A
Fuse
Power I/O
T 3.15 A, 250 V
US/Worldwide
Light Source
Photo Optic
Thermal
DMX
Ordering
Power input connector
Power output connector
Power cord plug
Type
LED
Color
Quad Color
Parameter
Illuminance @ 5 m
Beam angle
Field angle
Max. External Temperature
104° F (40° C)
I/O Connectors
5-pin XLR
Product Name
Legend™ 412 VW
IEC
N/A
Edison (US)
Power
10 W
Quantity
12
Standard Optics
1,680 lx
12.0º
23.0º
Cooling System
Convection
Connector Type
Sockets
Item Code
06010425
Weight
10.1 lbs (4.58 kg)
Legend™ 412 Series User Manual Rev. 5
Voltage Selection
Auto-ranging
230 V, 50 Hz
170 W
.7 A
T 3.15 A, 250 V
Europe
IEC
N/A
Local plug
Lifespan
50,000 hours
Current
700 mA (per die)
Channel Range
10,20
UPC Number
781462207779
CHAUVET®
5200 NW 108th Avenue
Sunrise, FL 33351 (USA)
(800) 762-1084 – (954) 929-1115
FAX (954) 929-5560 www.chauvetlighting.com
Legend™ 412 User Manual Rev. 5
August 2012
Legend™ 412 Series User Manual Rev. 5
Technical Information
-31-
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 5 What Is Included
- 5 Unpacking Instructions
- 5 Claims
- 5 Conventions
- 6 Symbols
- 6 Product at a Glance
- 6 Expected LED Lifespan
- 7 Safety Notes
- 7 Personal Safety
- 7 Mounting and Rigging
- 7 Power and Wiring
- 7 Operation
- 8 Product Description
- 8 Legend™ 412 Features
- 8 Legend™ 412 VW Features
- 9 Product Overview
- 10 Product Dimensions
- 11 Product Dimensions (Cont.)
- 12 AC Power
- 12 AC Plug
- 12 Fuse Replacement
- 13 DMX Linking
- 13 DMX Modes
- 13 Master/Slave Connectivity
- 14 Mounting
- 14 Orientation
- 14 Rigging
- 14 Procedure
- 14 Product Mounting Diagram
- 15 Control Panel Description
- 15 Control Options Legend
- 15 Control Options Legend 412 VW
- 15 Programming
- 15 DMX Personality
- 16 DMX Control
- 16 Static Color
- 16 Auto Programs
- 17 Master/Slave
- 17 Color Settings
- 17 Blackout Mode
- 17 Display Mode
- 17 Pan Invert
- 17 Tilt Invert
- 17 Display Invert
- 18 LED Temperature
- 18 CPU Temperature
- 18 Product Hours
- 18 Software Version
- 18 Self-Test
- 18 Reset
- 18 Factory Defaults
- 19 Menu Map (Legend™ 412)
- 20 Menu Map cont. (Legend™ 412)
- 21 Menu Map (Legend™ 412 VW)
- 22 Menu Map cont. (Legend™ 412 VW)
- 23 DMX Values (Legend™ 412)
- 23 12-Channel
- 24 28-Channel
- 25 28-Channel Cont
- 27 DMX Values (Legend™ 412 VW)
- 27 10-Channel
- 28 20-Channel
- 29 20 Channel Cont
- 30 Product Maintenance
- 31 Troubleshooting Guide
- 32 Returns Procedure
- 32 Contact Us
- 33 Technical Specifications Legend
- 34 Technical Specifications Legend™ 412 VW