User's Guide | Bissell 27F6 SERIES User`s guide

Earn BISSELL Rewards!
Register your
product today!
See details on
back page
USER'S GUIDE
94Y2, 27F6, 35K3, 73H5 SERIES
2
Thank You
3
Safety Instructions
4-5
6
7-12
13-15
Product View
Assembly
Operations
Maintenance and Care
16
Troubleshooting
17
Accessories
18
Replacement Parts
19
Warranty
20
Product Registration
20
Consumer Services
Thanks for buying a BISSELL Deep Cleaner
We’re glad you purchased a BISSELL deep cleaner. Everything we know
about floor care went into the innovative design and construction of this
complete, high-tech home cleaning system.
Your BISSELL deep cleaner is well made, and we back it with a limited two
year warranty. We also stand behind it with a knowledgeable, dedicated
Consumer Services department, so, should you ever have a problem, you’ll
receive fast, considerate assistance.
My great-grandfather invented the floor sweeper in 1876. Today, BISSELL
is a global leader in the design, manufacture, and service of high quality
homecare products like your BISSELL deep cleaner.
Thanks again, from all of us at BISSELL.
Mark J. Bissell
Chairman & CEO
DETACHABLE INNOVATION
Complete Line of BISSELL Lift-Off ® Products
Lift-Off®
Lift-Off®
Multi Cyclonic Floors & More
Vacuum Cordless Stick Vacuum
For more information visit www.bissell.com
Lift-Off®
Steam Mop
2
Lift-Off®
Deep Cleaner
w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic precautions
should be observed, including the following:
Read all instructions before using
your DEEP CLEANER.
WARNING:
To reduce the risk of fire,
electric shock, or injury:
■Do not immerse.
■Use only on surfaces moistened by the cleaning process.
■Always connect to a properly grounded outlet.
■See Grounding Instructions.
■Unplug from outlet when not in use and before conducting
maintenance or troubleshooting.
■Do not leave machine when it is plugged in.
■Do not service machine when it is plugged in.
■Do not use with damaged cord or plug.
■If appliance is not working as it should, has been dropped,
damaged, left outdoors, or dropped into water, have it repaired at
an authorized Service Center.
■Do not expose to rain, store indoors.
■Do not pull or carry by cord, use cord as a handle, close door on
cord, pull cord around sharp corners or edges, run appliance over
cord, or expose cord to heated surfaces.
■Unplug by grasping the plug, not the cord.
■Do not handle plug or appliance with wet hands.
■Do not put any object into appliance openings, use with blocked opening, or
restrict air flow.
■Do not expose hair, loose clothing, fingers or body parts to
openings or moving parts.
■Do not pick up hot or burning objects.
■Do not pick up flammable or combustible materials (lighter fluid, gasoline, kerosene, etc.) or use in the presence of explosive liquids or vapor.
■Do not use appliance in an enclosed space filled with vapors
given off by oil base paint, paint thinner, some moth proofing
substances, flammable dust, or other explosive or toxic vapors.
■Do not pick up toxic material (chlorine bleach, ammonia, drain
cleaner, gasoline, etc.).
■Do not modify the 3-prong grounded plug.
■Do not allow to be used as a toy.
■Do not use for any purpose other than described in this User’s Guide.
■Do not unplug by pulling on the cord.
■Use only manufacturer’s recommended attachments.
■Use only cleaning products formulated by BISSELL for use in this
appliance to prevent internal component damage. See the cleaning
fluid section of this guide.
■Keep openings free of dust, lint, hair, etc.
■Do not point attachment nozzle at people or animals
■Keep appliance on a level surface.
■Turn off all controls before unplugging.
■Unplug before attaching the TurboBrush®.
■Be extra careful when cleaning stairs.
■Close attention is necessary when used by or near children.
SAVE THESE
INSTRUCTIONS.
This model is for household use
only.
GROUNDING
INSTRUCTIONS
This appliance must be connected to
a grounded wiring system. If it should
malfunction or break down, grounding
provides a safe path of least resistance
for electrical current, reducing the risk of
electrical shock. The cord for this appliance has an equipment-grounding conductor and a grounding plug. It must only
be plugged into an outlet that is properly
installed and grounded in accordance
with all local codes and ordinances.
Grounded
Outlets
Grounding Pin
WARNING:
Improper connection of the equipmentgrounding conductor can result in a risk
of electrical shock. Check with a qualified
electrician or service person if you aren’t
sure if the outlet is properly grounded.
DO NOT MODIFY THE PLUG. If it will
not fit the outlet, have a proper outlet
installed by a qualified electrician. This
appliance is designed for use on a nominal 120-volt circuit, and has a grounding
attachment plug that looks like the plug in
the drawing above. Make certain that the
appliance is connected to an outlet having the same configuration as the plug.
No plug adapter should be used with this
appliance.
w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
3
Product view
Upper Handle
Carry Handle
Heat
Indicator Light
Formula &
Water Tank
Power Button
Power Cord
Quick Release™
Cord Wrap
Flex Hose
Dirty Tank
Portable Spot
Cleaning Release
Pedal
Edge Sweep®
Brushes
4
Removeable
Nozzle
w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
Product view
Spray Trigger
Cord Clip
Tool Storage
Support Handle
Tool Storage
(some models)
Hose Secure
Latch
Cleaning fluid
WARNING:
Recline Pedal To reduce the risk of fire
and electric shock due to
internal component
damage, use only BISSELL
cleaning fluids intended
for use with the deep
cleaner.
Keep plenty of genuine BISSELL 2X formula on hand so you can clean and protect whenever
it fits your schedule. Always use genuine BISSELL deep cleaning formulas. Non-BISSELL
cleaning solutions may harm the machine and will void the warranty.
BISSELL
BISSELL
BISSELL
BISSELL
BISSELL
BISSELL
BISSELL
2X
2X Fiber
2X Pet Stain 2X Allergen 2X Natural 2X Lavender Tough
Essence
Professional Cleansing
and Odor
Cleansing
Orange
Stain
Formula
Deep
Formula with Formula with Formula
Formula
PreCleaner
Cleaning
Scotchgard™ Scotchgard™
Formula with Protection
Protection
Scotchgard™
Protection
w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
5
Assembly
Your deep cleaner comes in two
easy to assemble components:
1.Upper handle
2. Portable spot cleaner/Base
The only tool you will need to
assemble your cleaner is a Phillips
screwdriver.
1.Slide the upper handle onto the body of
the machine by guiding the 2 posts on
the body into the opening on the upper
handle.
1.
2.
IMPORTANT
IMPORTANT
ASSEMBLY
ASSEMBLYINSTRUCTIO
INSTRUCTIO
1.
Use Use
a minimum
a minimum
of a of
#2ax#2
4"xor4"#2orx#2
100mm
x 100mm
Philips
Philips
screwdriver
screwdriver
for assembl
for asse
2.
2.Firmly holding the upper handle in
place, screw 2 screws intoIMPORTANT
the marked
holes at an upward
angle above INSTRUCTIONS
the
ASSEMBLY
for
support handle. Use a minimum of a #2 x 4" or #2 x 100mm Philips screwdriver
Slide
Slide
theassembly.
the
upper
upper
handle
handle
ontoonto Firmly
Firmly
holding
holding
thethe
upper
upper At an
At upward
an upwa
the the
body
body
of the
of the
machine
machine
by by4.
handle
handle
in place,
in place,
screw
screw
2 2 the the
remaining
remain
3.
3. At an upward angle, screw the remaining
guiding
guiding
the the
2 posts
2 posts
on the
on the screws
screws
intointo
thethe
marked
marked the the
marked
marked
ou
2 screws into the marked outermost holes
body
body
intointo
thethe
opening
opening
on on holes
holes
at an
at upward
an upward
angle
angle under
under
the the
sup
Cord
the the
upper
upper
handle.
handle.
above
above
the the
support
support
handle.
handle. Hose
under the support handle.
side
side
4. Wrap power cord around Quick
Release Cord Wrap.
5. Wrap flex Slide
hose
around
the hose
wrap
the upper
handle onto
Firmly holding
the upper
body ofhose
the machine
by handle
in place, screw 2
and securethewith
secure
latch.
guiding the 2 posts on the
screws into the marked
5.
body into the opening on
holes at an upward angle
6. Align the product
as image 4
shows
the upper handle.
above the support handle.
and firmly push down the portable spot
cleaner until it is secured on both sides.
At an upward angle, screw
the remaining 2 screws into
the marked outermost holes
under the support handle.
7. Check latches on both sides to confirm
it is secured (5).
8.Snap attachment(s) into the back of unit.
NOTE: Portable spot cleaner must
be fully secure to operate in the
upright mode.
6
To further check if the portable
spot cleaner is secure, plug in
and turn on to verify that the
heat indicator light is illuminated.
If the heat indicator light does
not illuminate, release the pod
and re-secure by pushing firmly
until both sides snap into place.
Warning:
Do not plug in your
cleaner until you have
completely assembled it
per the above instructions
and are familiar with
all instructions and
operating procedures.
w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
Operations
Special features
Innovative cleaning technology
This innovative deep cleaner offers two
machines in one. The upright deep cleaner
uses the power of heat, brushes and
cleaning formula to get deep down dirt
for a maximum clean. The portable spot
cleaner detaches to clean tough spots and
stains and hard to reach areas.
Hot water heater
This deep cleaner features a patented built-in
hot water heater which will heat the hot tap
water you put in to safely optimize cleaning
effectiveness. The heater temperature is
limited to prevent carpet damage. The heater
automatically turns on when you turn the
machine on. This operates only in upright
cleaning mode.
Scotchgard™ Protector
Carpet protection applied at the mill typically
wears down over time from heavy foot traffic
and everyday cleaning, including deep cleaning. To help restore this important protection,
only BISSELL offers deep cleaning formulas
with Scotchgard protector. This offers extra
protection against dirt and tough stains to
keep your carpets looking good longer.
Pedal Graphic
Tip:
For easy carrying, grab the
carry handle portable spot
cleaner and balance with
the handle on the back of
the machine.
To maintain your Scotchgard 5-year limited
stain warranty, you do not need to hire a
professional. By using your BISSELL deep
cleaner with BISSELL 2X formulas containing
Scotchgard protector every 12 months, your
carpet warranty from 3M remains in effect.
No other home deep cleaning system can do
this for you. Refer to the Scotchgard Protector
warranty for details.
w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
7
Operations
Before you clean
1.Move furniture to another area if cleaning
an entire room (optional).
2. Vacuum area with a dry vacuum cleaner
thoroughly before deep cleaning.
3. Pretreating (optional):
3a.Pretreating is recommended to improve
cleaning effectiveness for heavily soiled
carpet in high traffic areas such as
entryway and hallways.
3b.BISSELL Tough Stain precleaner
Spray the BISSELL Tough Stain
precleaner formula onto heavy traffic
areas, soiled areas or stains.
Allow to penetrate for at least 3 minutes.
Clean as normal, using the deep
cleaner in upright mode, following
the instructions below.
Upright cleaning mode
ATTENTION:
Some Berber carpets have a
tendency to fuzz with wear.
Repeated strokes in the same
area with an ordinary vacuum
or deep cleaner may
aggravate this condition.
3b.
1.
2.
Filling formula & water tank
1. Remove tank from the base of the machine
by lifting up tank carry handle.
Note: This tank was designed with a
flat bottom so it can be easily filled.
2. Unscrew the black cap and remove
bottle insert.
3. Fill tank with hot tap water to the water
fill line. Add two ounces of BISSELL 2X
formula to the tank.
4. Replace the bottle insert in the tank and
tighten the black cap. Replace the tank
on the deep cleaner.
Cleaning
1. Plug into a proper outlet and press the
power button. Allow 1 minute for the hot
water heater to warm-up before cleaning.
2. While pressing the trigger, make one slow
forward wet pass and another one back.
8
w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
Operations
Upright cleaning mode continued
Cleaning continued
CAUTION:
Do not overwet. Take care not
3. Release the trigger and make one slow
forward and backward pass over the
same area. Repeated passes will help
aid in dry time.
4. Continue passes until cleaning area
is complete.
Note: Your machine may be equipped
with a circuit breaker that will automatically shut off the brush if a large
or loose object is caught in the brush
roll. If that happens, be sure to unplug
your machine, remove the foreign
object, and then plug the machine
back in to reset the circuit breaker.
Empty dirty tank
1. When the dirty tank reaches the “FULL”
line on the tank it is time to empty.
2. Remove dirty tank and carry to a utility
sink, toilet or outside (where you will
dispose of the dirty water).
to run over loose objects or
edges of area rugs. Stalling
brush may result in premature
belt failure.
Tip:
Make only one trip to the
sink by removing the entire
portable cleaner. Fill and
empty in the same trip.
3.
2.
3. To unlock the dirty tank lid, rotate handle
over the back of the tank. Remove lid and
pour out dirty water. Rinse out dirty tank
to remove any debris.
4. Replace top of tank, and rotate the handle
forward to lock in place on front of tank.
5.
4.
5. Before replacing tank on machine, wipe
debris from red filter
Cleaning your machine
1. Flush out machine of any remaining
residual solution.
Fill the formula & water tank with hot
tap water and turn on your machine.
Recline handle and press the spray
trigger for about 15 seconds while
making forward and backward passes
on carpet. Continue without pressing
the trigger until there is no more water
being suctioned up.
Turn off the machine and wrap the
powercord. Make sure the dirty tank and
the formula & water tank are emptied,
rinsed, and dried before the next use.
Before you replace tank, clean
all debris from red filter screen.
WARNING:
To reduce the risk of fire, electric
shock, or injury, turn power
OFF and disconnect plug from
electrical outlet before performing
maintenance or troubleshooting.
Tip:
For best results empty,
rinse and dry both tanks
before storing.
w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
9
Operations
Upright cleaning mode continued
Cleaning your machine continued
2. Rinse front nozzle of any dirt and debris.
Remove portable spot cleaner from the
base of the machine.
Unscrew three screws with Phillips
screw driver and remove nozzle.
Rinse nozzle out at the faucet.
Place back onto the machine by hooking
the tabs into the holes on the bottom sides
of the machine. Secure with screws.
WARNING:
To reduce the risk of fire,
electric shock or injury unplug
from outlet before servicing.
2.
3. The inside of the end caps can be
wiped out with a clean paper towel,
or for a more thorough clean, the end
caps can be taken off and rinsed clean.
4.Any loose hair or debris can be pulled
from the brush rolls and thrown away. For
a more thorough clean, follow directions
on page 15 for removal of brush rolls.
Your machine is now ready to be stored.
Note: Store cleaner in a protected,
dry area. Since this product uses
water, it must not be stored where
there is a danger of freezing.
Freezing will damage internal
components and void the warranty.
10
Tip:
Let all parts dry completely
and replace onto machine.
w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
Operations
Portable spot cleaning mode
Preparing the machine
1. Step on the portable spot cleaning pedal
to release the portable spot cleaner.
2. Release flex hose by twisting the hose
secure latch clockwise. Unwrap flex
hose completely.
3. Attach the desired tool to the hose grip
until it snaps together. Make certain the
tool is securely attached.
4. Twist the Quick Release cord wrap clockwise to unwrap the power cord completely and plug into grounded outlet.
Filling tank
1. Follow the instructions for filling the tank
in the upright cleaning mode section on
page 8.
Cleaning with Tools:
Important! If using to clean upholstery, check upholstery tags. Check
manufacturer’s tag before cleaning.
“W” or “WS” on the tag means you
can use your Lift off Deep Cleaner if
the tag is coded with an “X” or an
“S”(with a diagonal stripe through it),
or says “Dry Clean Only”, do not proceed with any deep cleaning machine.
Do not use on velvet or silk. If manufacturer’s tag is missing or not coded,
check with your furniture dealer.”)
tank water level to help prime the
portable spot cleaner.
2. Using the brush on the tool, gently scrub
the area to be cleaned.
3. Apply downward pressure on the tool and
pull it toward you. The suction will remove
the dirt and cleaning solution. Continue until
no more dirt can be removed.
bvh
g kvh
gh j j h
d b lg
fd hn l kl
sd jkn f h
Ad bj jh
b j
cv hh
gcg
1. Hold the tool approximately 1" above
the soiled surface. Press the spray
trigger to apply the cleaning solution
to the soiled area.
Note: Hold end of hose below the
Manufacturer’s tag
Check for colorfastness in an
inconspicuous place. If possible, check upholstery stuffing.
Colored stuffing may bleed
through fabric
w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
11
Operations
Portable spot cleaning mode continued
Cleaning with Deep Reach™ Tool
1. Set tool on soiled surfaces and press the
trigger to spray solution onto the soiled
area to be cleaned.
2. Slowly move the tool back and forth
over the soiled surface, keeping the tool
in contact with the carpet.
Release trigger and move tool slowly
over the soiled area to suction up
water and dirt.
4. Continue to clean the area, working
in small sections, until no more dirt
can be removed.
1.
3.
Empty dirty tank
Follow the instructions under Empty
dirty tank section on page 9 of the
Upright cleaning mode section.
Replacing portable machine on base
1.Align the product as the graphic shows,
with the cord side on the left and hose
side on the right.
2. Push down the portable spot cleaner
until you hear it click securely into
place. Test the fit by pulling up on the
carry handle to make sure it is secure.
Cleaning portable machine
1. Remove and rinse the tools in clean,
running water. Dry and replace in the
tool storage provided.
2. It is recommended that you suction clean
water from a bowl to rinse out the hose.
Then lift end of hose and stretch out to
ensure all water is cleared from hose.
3. Coil flex hose around the hose wrap
and secure with latch.
4. Check suction gate and if it appears
dirty, follow steps 1-4 under Cleaning
Suction Gate on page 13.
12
1.
Graphic
Maintenance and care
Machine care (check regularly)
WARNING:
To reduce the risk of fire, elec-
Cleaning suction gate
The suction gate automatically diverts
air when the portable deep cleaner
is detached. This should be checked
and cleaned regularly for any dirt
and debris.
tric shock, or injury, turn power
OFF and disconnect plug
from electrical outlet before
performing maintenance or
troubleshooting.
1. Step on the pedal and remove
the portable spot cleaner. Remove
dirty tank.
2.
2. Remove two screws and pull off
suction gate door.
3. Wipe suction gate clean and rinse
suction gate door.
4. Replace suction gate door and
two screws.
Suction
Gate
Cleaning spray tips
1. Step on the pedal and remove the
portable spot cleaner. To remove,
push in tab and pull it out.
Spray
Tips
2. Clean by rinsing under hot water.
3. Replace by snapping back in.
1.
4. Repeat steps on second spray tip.
Cleaning solution filter
1. Step on the pedal and remove the
portable spot cleaner. Remove the
red solution filter cap on the base
of the machine by inserting a coin
or a flat head screw driver into the
slot on the top.
2. Turn counter clockwise to unscrew.
Set aside.
3. Remove the white filter by the post.
Rinse the filter under water.
4. Replace the white filter back into the
filter area.
2.
Solution
Filter Cap
3.
Note: Make sure the white filter is
seated properly before replacing
the red solution filter cap.
5. Replace the red solution filter cap and
turn clockwise to tighten.
5.
Filter
w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
13
Maintenance and care
Small belt removal and replacement (as needed)
Occasional replacement of one or
both belts may become necessary.
If that is needed, please follow the
instructions below.
1. Turn off the machine, and unplug it from
the outlet. Remove portable spot cleaner.
2. Remove the nozzle by unscrewing three
screws on the nozzle cover.
WARNING:
To reduce the risk of fire,
electric shock or injury,
unplug from the outlet
before servicing.
2.
3. Turn the machine on its side.
IMPORTANT: with portable spot
cleaning pedal facing down.
4. Remove end cap by unscrewing the
3 screws. Take care not to drop the
screws into the unit.
4.
5.
5. Remove 1 silver screw from the
pivot arm.
6. Remove pivot arm by gently lifting up.
7. Remove small brush belt.
8. Replace small brush belt, and reverse
steps above.
9. Manually rotate brushes by hand to
make sure they move freely. May notice
a slight resistance from the motor.
6.
7.
14
8.
w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
Maintenance and care
Brush removal and large belt replacement (as needed)
Brushes can be removed for cleaning
or replacement as needed.
1. Follow small belt removal Instructions on
page 14 items 1-7.
2. Remove brush rolls by pulling them off
of the metal rods. Be careful not to
lose the small washer at each
end of the brush rolls.
WARNING:
To reduce the risk of fire,
electric shock or injury,
unplug from the outlet
before servicing.
2.
3.
4.
5.
6.
7.
3. Re-attach the large belt to the grooves
on the end of the new brush rolls. If
the belt is damaged, replace with a
new belt.
4. Place cleaned or new brush rolls back
onto the rods. Make sure one washer is
on each end of the rollers prior to sliding
onto the rod. Be sure the brush is seated
completely on the rod.
5. Replace small belt over grooves in
back roller and metal cog.
6. Replace pivot arm and secure with
silver screw.
7. Re-attach end cap by tightening with
the (3) black screws.
8. Return front nozzle to front of unit, by
latching from underneath and then
securing with 3 screws.
9. Follow step number 8 & 9 on page 14.
If you have any questions or are having
trouble installing or replacing your
belt(s) or brushes, please call
BISSELL Consumer Services.
8.
w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
15
Troubleshooting
Built-in heater ready light does not illuminate
Possible causes
1. The power is not turned ON Remedies
1. The power must be ON to activate the heater ready light
2. The portable spot cleaner is not attached completely
2. Make sure the portable spot cleaner is attached
Push down firmly to check
Reduced Spray or No Spray
Possible causes
Remedies
1. Formula & water tank may be empty
1. Refill tank
2. Formula & water tank may not be seated completely
2. Turn power OFF. Remove and reseat tank
3. Pump may have lost prime in portable spot cleaning mode
3. Hold end of hose below water level in tank to prime
4. The portable spot cleaner is not attached completely
4. Push down firmly to check connection
5. Solution filter may be clogged
5. Follow steps under cleaning filter on page 13
DirtLifter® PowerBrush does not turn
Possible causes
Remedies
1. The portable spot cleaner is not attached completely
1. Make sure the portable spot cleaner is attached.
Push down firmly to check
2. The unit is in the upright position
2. Brushes only rotate when unit is reclined using the
recline pedal
3. Circuit breaker on machine (if equipped) may have tripped
3. Turn the machine OFF and unplug from outlet. Check
to see if foreign object is caught in brush roll. Remove
object. Plug machine in to reset circuit breaker
4. The belt is off or broken
4. Turn power OFF and unplug unit from outlet. Follow
instructions on pages 14 and 15
Loss of suction power
Possible causes
Remedies
1. Tanks may not be seated properly
1. Pick up both tanks and reseat them so it they fit snugly on
the unit
2. Nozzles may not be assembled properly
2. Unplug the unit. Check to make sure the "lip" of the nozzle is securely hooked into the groove on bottom of Tank (see page 10)
3. The portable spot cleaner is not attached completely
3. Make sure the portable spot cleaner is attached.
Push down firmly to check
4. Dirty tank has picked up maximum amount of
4. Empty dirty tank
dirty water and has reached full line
5. Formula & water tank is empty
5. Check fluid levels in formula & water tank
6. Suction Gate is open.
6. Check to make sure the suction gate is closed. Follow “Cleaning Suction Gate” instructions on page 13.
Other maintenance or service not included in the manual should be
performed by an authorized service representative.
Thank you for selecting a BISSELL product.
Please do not return this product to the store.
For any questions or concerns, BISSELL is happy to be of
service. Contact us directly at 1-800-237-7691.
16
w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
Accessories - BISSELL deep cleaner
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
*Not all
Part No. Part Name
203-6651 3” Tough Stain Tool
203-6652 Powered TurboBrush® Hand Tool
203-6653 4” Upholstery Tool
203-6654 6” Stair Tool
203-7885Spraying Crevice Tool
203-7412Deep Reach Pet Tool
62E5-2
2X Fiber Cleansing Formula with Scotchgard™ Protection 60 oz.
99K5-2
2X Pet Stain and Odor Formula with Scotchgard™ Protection 60 oz.
89Q5-2
2X Allergen Cleansing Formula 60 oz.
83P3-2
2X Natural Orange Formula 60 oz.
34B5-2
2X Lavender Essence Formula 60 oz.
78H6-3
2X Professional Deep Cleaning Formula with Scotchgard™ Protection 48 oz.
26V2
2X Spring Breeze Formula 60oz.
0790
Pet Stain and Odor Remover™ 16 oz.
4001Tough Stain PreCleaner 22 oz.
310-3040Mesh Bag
parts are included with every model.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
17
Replacement parts – BISSELL deep cleaner
Below please find a list of common replacement parts. While not all of these
parts may have come with your specific machine, all are available to you for
purchase, if desired.
Item Part No. Part Name
1
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
203-7893Formula & Water Tank Assembly (includes cap and insert)
203-6675Cap and Insert for Formula & Water Tank
203-7894Dirty Tank Assembly (includes entire tank)
203-7904Cord Wrap
203-7896End Caps with Edge Brushes (2 pack, includes screws)
203-7897Spray Tips Assembly (includes two spray tips)
203-7898In-line Filter Assembly (includes cap and filter)
203-7901Nozzle Gasket
203-7906Nozzle Cover Assembly (includes gasket, nozzle cover, and front nozzle cover)
203-7907Front Nozzle
203-7915Brush Assembly (includes 2 brush rolls, 2 axles, and 2 swivel arms)
203-7916Brush Single Pack (includes 1 brush roll, and 1 axle)
203-7900Small Brush Belt
203-7899Large Brush Belt
203-6689Hose Secure Latch
203-7918Dirty Tank Gasket Assembly (include both gaskets)
203-7917Diverter Cover Assembly (includes cover and screws)
*Not all parts are included with every model.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
Warranty – Accessories – BISSELL deep cleaner
This warranty gives you specific legal rights, and you may also have other rights which may
vary from state to state. If you need additional instruction regarding this warranty or have
questions regarding what it may cover, please contact BISSELL Consumer Services by E-mail,
telephone, or regular mail as described below.
Limited Two Year Warranty
Subject to the *EXCEPTIONS AND EXCLUSIONS identified below, upon receipt of the
product BISSELL will repair or replace (with new or remanufactured components or products),
at BISSELL’s option, free of charge from the date of purchase by the original purchaser, for
two year any defective or malfunctioning part.
See information below on "If your BISSELL product should require service".
This warranty applies to product used for personal, and not commercial or rental service. This
warranty does not apply to fans or routine maintenance components such as filters, belts, or
brushes. Damage or malfunction caused by negligence, abuse, neglect, unauthorized repair, or
any other use not in accordance with the user's guide is not covered.
If your BISSELL product should require service:
Contact BISSELL Consumer Services to locate a BISSELL Authorized Service Center in your area.
If you need information about repairs or replacement parts, or if you have questions about
your warranty, contact BISSELL Consumer Services.
Website or E-mail:
www.bissell.com
Or Call:
BISSELL Consumer Services
1-800-237-7691
Monday – Friday 8 am - 10 pm ET
Saturday 9 am - 8 pm ET
Or Write:
BISSELL Homecare, Inc.
PO Box 3606
Grand Rapids, MI 49501
ATTN: Consumer Services
BISSELL IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE
ASSOCIATED WITH THE USE OF THIS PRODUCT. BISSELL’S LIABILITY WILL NOT EXCEED THE
PURCHASE PRICE OF THE PRODUCT.
Some states do not allow the exclusion or limitation of incidental or consequential
damages, so the above limitation or exclusion may not apply to you.
*EXCEPTIONS AND EXCLUSIONS FROM THE TERMS OF THE LIMITED WARRANTY
THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ANY OTHER WARRANTIES EITHER ORAL OR
WRITTEN. ANY IMPLIED WARRANTIES WHICH MAY ARISE BY OPERATION OF LAW, INCLUDING
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE
LIMITED TO THE Two YEAR DURATION FROM THE DATE OF PURCHASE AS DESCRIBED ABOVE.
Some states do not allow limitations on how long an implied warranty last so the above limitation
may not apply to you.
w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
19
Don't forget to register your product!
Registering is quick, easy and offers you benefits over the lifetime of your product.
You’ll receive:
BISSELL Rewards Points
Automatically earn points for discounts and free shipping on future purchases.
Faster Service
Supplying your information now saves you time should you need to contact us with
questions regarding your product.
Product Support Reminders and Alerts
We’ll contact you with any important product maintenance reminders and alerts.
Special Promotions
Optional: Register your email to receive notice of offers, contests, cleaning tips and more!
Visit www.bissell.com/registration now!
BISSELL consumer services
For information about repairs or replacement parts, or questions about your warranty, call:
BISSELL Consumer Services
1-800-237-7691
Monday – Friday 8 am - 10 pm ET
Saturday 9 am - 8 pm ET
Or write:
BISSELL Homecare, Inc.
PO Box 3606
Grand Rapids MI 49501
ATTN: Consumer Services
Or visit the BISSELL website - www.bissell.com
When contacting BISSELL, have model number of cleaner available.
Please record your Model Number: ___________________
Please record your Purchase Date: ___________________
NOTE: Please keep your original sales receipt. It
provides proof of purchase date in the event of a
warranty claim. See Warranty on page 19 for details.
20
©2012 BISSELL Homecare, Inc
Grand Rapids, Michigan
All rights reserved. Printed in China
Part Number 120-4437
Rev 1/12
Visit our website at:
www.bissell.com
Scotchgard is a trademark of 3M
w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1