Sennheiser VMX 200-II Instruction manual

Bluetooth headset for phone calls
VMX 200-II
Instruction manual
Contents
Contents
Important safety information ...................................................................... 2
The VMX 200-II Bluetooth headset ............................................................. 4
Delivery includes ............................................................................................ 5
Product overview ...........................................................................................
VMX 200-II headset .......................................................................................
Charging accessories .....................................................................................
Overview of pictograms ...............................................................................
Overview of the LED indications .................................................................
Overview of buttons .....................................................................................
6
6
6
7
8
9
Putting the VMX 200-II into operation ..................................................... 10
Charging the headset battery ................................................................... 10
Connecting the headset to a Bluetooth device ..................................... 11
Using the VMX 200-II .................................................................................. 13
Individually adjusting the VMX 200-II and wearing it ......................... 13
Switching the VMX 200-II on/off ............................................................. 15
Retrieving information on the remaining talk time ............................. 16
Changing the speaker volume ................................................................... 16
Making calls using the headset ................................................................. 17
Managing multiple calls ............................................................................. 19
Listening to music using the headset ...................................................... 20
Cleaning and maintaining the VMX 200-II ............................................... 21
If a problem occurs ... .................................................................................. 22
Restoring factory default settings (Reset) ............................................ 22
If you are out of the Bluetooth transmission range ............................. 23
Specifications ............................................................................................... 24
Manufacturer Declarations ......................................................................... 25
VMX 200-II | 1
Important safety information
Important safety information
왘 Read this instruction manual carefully and completely before using the
product.
왘 Always include this instruction manual when passing the product on to
third parties.
왘 Do not use an obviously defective product.
Preventing damage to health and accidents
왘 Do not listen at high volume levels for long periods of time to prevent
hearing damage.
왘 Always maintain a distance of at least 3.94“ (10 cm) between the ear
cups and the cardiac pacemaker or implanted defibrillator since the
product generates permanent magnetic fields.
왘 Keep the product, accessories and packaging parts out of reach of children and pets to prevent accidents and choking hazards.
왘 Do not use the product in an environment that requires your special
attention (e.g. in traffic).
왘 Do not wear the headset during charging since the rechargeable
battery can get warm.
Preventing damage to the product and malfunctions
왘 Always keep the product dry and do not expose it to extreme temperatures (hairdryer, heater, extended exposure to sunlight, etc.) to avoid
corrosion or deformation.
왘 Only use attachments/accessories supplied or recommended by
Sennheiser.
왘 Only clean the product with a soft, dry cloth.
왘 Only use the product in environments where wireless Bluetooth®
transmission is permitted.
Intended use/Liability
The VMX 200-II is an accessory for mobile phones or any Bluetooth compliant device with a “hands free profile” (HFP), a “headset profile” (HSP),
an “audio video remote control profile” (AVRCP) and an “advanced audio
distribution profile” (A2DP). It is intended for wireless communication via
Bluetooth connection.
It is considered improper use when this product is used for any application
not named in this instruction manual.
Sennheiser does not accept liability for damage arising from abuse or
misuse of this product and its attachments/accessories.
Sennheiser is not liable for damages to USB devices that are not consistent
with the USB specifications.
Sennheiser is not liable for damages resulting from the loss of connection
due to flat or overaged rechargeable batteries or exceeding the Bluetooth
transmission range.
2 | VMX 200-II
Important safety information
Safety instructions for rechargeable batteries
In extreme cases, abuse or misuse of rechargeable batteries can lead to:
WARNING
•
•
•
•
explosion,
fire development,
heat generation or
smoke or gas development.
Dispose of products with
built-in rechargeable batteries at special collection
points or return them to
your specialist dealer.
Switch rechargeable
battery-powered products
off after use.
Only use rechargeable batteries recommended by
Sennheiser and the appropriate chargers.
When not using rechargeable batteries for extended
periods of time, charge
them regularly (about
every 3 months).
Only charge rechargeable
batteries at ambient
temperatures between
10°C/50°F and 40°C/104°F.
Do not heat above
70°C/158°F, e.g. do not
expose to sunlight or
throw into a fire.
VMX 200-II | 3
The VMX 200-II Bluetooth headset
The VMX 200-II Bluetooth headset
The stylish new VMX 200-II Bluetooth headset is the wireless solution for
phone calls with superb sound quality. It features VoiceMax Dual Microphone technology that filters away background noise and enhances your
voice, thus providing crystal clear speech.
Bluetooth
The VMX 200-II complies with the Bluetooth 3.0 standard and is compatible with all Bluetooth 1.1, 1.2, 2.0, 2.1 and 3.0 devices with a “hands free
profile” (HFP), a “headset profile” (HSP), an “audio video remote control
profile“ (AVRCP) and an “advanced audio distribution profile” (A2DP). The
VMX 200-II provides wireless freedom to give hands-free convenience
with your mobile phone.
Additional features of the VMX 200-II Bluetooth headset
4 | VMX 200-II
•
VoiceMax Dual Microphone technology – two microphones work in synergy; one to emphasize your voice, the other to remove noise
•
Echo-free conversations – digital echo cancellation eliminates all
echoes while you are talking
•
Easy call control – with just one hand, you can quickly take or end calls
and adjust the volume to suit you best
•
HD quality sound – crystal-clear, detailed and transparent sound reproduction due to large wideband speaker (11 mm) and extended frequency response
•
Lightweight comfort – weighs only 10 grams
•
Flexible wearing style – wear left or right, use with or without ear hook
•
Long talk time – talk to business partners and friends for up to
10 hours, with up to 12 days of standby time
•
Headset battery level indicator displayed on Apple iPhone® screen
•
Adaptive volume level – automatic, adaptive volume adjustment for
optimized speech intelligibility and sound quality
Delivery includes
Delivery includes
VMX 200-II mono Bluetooth headset
with built-in rechargeable Lithium-Polymer battery
Ear hook
Ear adapter without loop
Ear adapters with loop (S, M, L)
Power supply unit (EU/US version)
not supplied with the VMX 200-II USB version
Car charger
only for VMX 200-II 3in1 version
Charging cable
Quick
Guide
Quick Guide
Safety
Guide
Safety Guide
A list of accessories can be found on the VMX 200-II product page at
www.sennheiser.com. For information on suppliers, contact your
local Sennheiser partner: www.sennheiser.com > “Sales Partner“.
VMX 200-II | 5
Product overview
Product overview
VMX 200-II headset
1
3
7
2
6
3
5
4
1 Multi-function button
5 Volume up button
2 LED
6 Ear adapter with loop
3 Microphone
7 USB socket
4 Volume down button
Charging accessories
8
9
0
8 Power supply unit
(EU/US version)
not supplied with the
VMX 200-II USB version
6 | VMX 200-II
9 Charging cable
0 Car charger
only for VMX 200-II 3in1 version
Product overview
Overview of pictograms
Meaning of the pictograms for pressing a button
Pictogram
Meaning
Briefly press this button.
2x
Double-press this button.
5s
Keep this button pressed for 5 seconds.
Meaning of the pictograms for the beeps
Pictogram
Meaning
Ascending sequence of beeps
Descending sequence of beeps
One beep
Several beeps
Two descending beeps
Two ascending beeps
Meaning of the pictograms for the flashing of the LED
Pictogram
Meaning
This pictogram symbolizes a flashing.
This pictogram symbolizes an interruption.
This pictogram symbolizes a time interval.
Examples of some of the pictograms that are used throughout this instruction manual:
Pictogram
Meaning
The LED flashes rapidly.
3s
The LED flashes once every 3 seconds.
The LED flashes 3 times per second.
The pictogram “i”
Notes marked with the pictogram “i” provide important information
on the use of the headset.
VMX 200-II | 7
Product overview
Overview of the LED indications
Meaning during operation
LED
Meaning
Headset switches on
Headset switches off
Headset is in pairing mode
Pairing was successful
Pairing has failed or has been cancelled
3s
Connectable state, not connected
Once the headset is successfully connected, the LED goes off.
Meaning during calls
LED
Meaning
Incoming call
Incoming call + rechargeable battery is weak
Meaning during charging
LED
Meaning
Charging in progress:
battery level between 0% and 50%
Charging in progress:
battery level above 50%
Battery is fully charged
8 | VMX 200-II
Product overview
Overview of buttons
Multi-function button
Press the
button
Function
Accepts a call
Page
17
Ends a call
17
Transfers a call from the mobile phone to the
headset
17
Accepts an incoming call and ends the active call
(managing two calls)
19
Ends the active call and makes the call on hold active 19
(managing two calls)
1s
2s
2x
3s
Stops redialing
18
Pauses the track/resumes the track
Rejects the incoming call and continues the active
call (managing two calls)
20
19
Establishes a conference call (managing two calls)
19
Transfers a call from the headset to the mobile
phone
Rejects a call
17
Voice dialing
18
Stops voice dialing
18
Rejects the incoming call and continues the active
call (managing two calls)
Redials the last number
19
Accepts an incoming call and puts the active call
on hold (managing two calls)
19
Toggles between two calls (managing two calls)
Switches the headset on
19
15
Switches the headset off
15
Changes to pairing mode
12
17
18
5s
Volume buttons
Button
Vol +
Duration
Function
Increases/reduces the volume
Page
16
Vol –
Mutes the headset‘s microphone 18
Vol –
Vol +
Vol –
2s
Vol +
Vol +
2s
Vol –
3s
Unmutes the headset‘s
microphone
Retrieves information on the
remaining talk time
Resets the headset to the
factory default settings
18
16
22
VMX 200-II | 9
Putting the VMX 200-II into operation
Putting the VMX 200-II into operation
Charging the headset battery
WARNING
Danger of injury!
Wearing the headset when charging can cause burns and injuries.
왘 Do not wear the headset when charging.
1:20 h
A complete charging cycle takes about 1 hour and 20 minutes. Before
using the headset for the first time, charge the rechargeable battery for
a complete charging cycle without interruption.
A charging time of ...
approx. 10 min
approx. 20 min
approx. 40 min
approx. 60 min
approx. 80 min
corresponds to a talk time of ...
approx. 1 h 30 min
approx. 2 h 40 min
approx. 5 h 20 min
approx. 7 h 30 min
approx. 10 h
1 Take off the headset and switch it off (see page 15).
2 Connect the smaller plug of the charging cable to the USB socket of the
VMX 200-II.
3 Connect the USB plug of the charging cable to the USB socket of the
power supply unit or your computer.
4 The battery is being charged.
The LED lights up red until the charge state reaches 50%. Then the LED
lights up blue until the charging cycle is complete. When the rechargeable battery is fully charged, the LED flashes 3 times blue and then goes
off.
1
OFF
2
3s
3
4
*
0 – 50 %
50 – 100 %
100 %
**
*not supplied with USB version
**only supplied with 3in1 version
3x
Off
When the battery level drops below 15 minutes of talk time, the LED
flashes red and you hear a low battery warning every 5 minutes. The
headset automatically switches off after the battery has dropped
below the minimum level.
10 | VMX 200-II
Putting the VMX 200-II into operation
Charging the rechargeable battery using the USB smart charging cable
The shapeable USB charging cable allows you to charge the headset so that
it, for example, does not even touch your desk. Its compact size also prevents cable tangles.
Connecting the headset to a Bluetooth device
CAUTION
Danger of malfunction!
The transmitted radio waves of mobile phones can impair the operation of
sensitive and unprotected devices.
왘 Only make calls with the headset in locations where wireless Bluetooth
transmission is permitted.
The headset complies with the Bluetooth 3.0 standard. In order that data
can be transmitted wirelessly using Bluetooth technology, you have to
pair your headset with Bluetooth devices that support the “hands free
profile” (HFP), the “headset profile” (HSP), the “audio video remote
control profile” (AVRCP) and the “advanced audio distribution profile”
(A2DP).
The headset can save the connection profiles of up to eight Bluetooth
devices with which it has been paired. After switch-on, the headset automatically tries to connect to the two last connected Bluetooth devices.
If you pair the headset with a ninth Bluetooth device, the saved connection
profile of the first Bluetooth device will be overwritten. If you want to reestablish a connection with the first Bluetooth device, you have to pair the
headset again.
connected
stored
VMX 200-II | 11
Putting the VMX 200-II into operation
Pairing the VMX 200-II with a Bluetooth device
The following chapter describes, by way of example of a mobile phone,
how to pair the VMX 200-II with a Bluetooth device. In case of deviation,
proceed as described in the instruction manual of your mobile phone.
1 Switch the headset off (see page 15). Then keep the multi-function
button pressed until the LED alternately flashes blue and red. The
headset is in pairing mode.
2 Enable the Bluetooth visibility on your mobile phone.
3 On the mobile phone, start a search for Bluetooth devices. All available
devices in the proximity of the mobile phone are displayed.
4 From the found Bluetooth devices, select “Sennheiser VMX 200-II” to
establish a Bluetooth connection to the headset. If necessary, enter
thedefault PIN code “0000”.
5 Once the headset is paired with the mobile phone, the LED turns off.
1
2
Menu
Bluetooth on
Bluetooth off
5s
20 cm
3
4
Menu
Add device
Sennheiser VMX 200-II
Mobile phone Jane
Sennheiser VMX 200-II
Keyword:
0000
5
If pairing is not successful within 5 minutes, the headset automatically
returns to connectable mode. Repeat the pairing procedure.
12 | VMX 200-II
Using the VMX 200-II
Using the VMX 200-II
Individually adjusting the VMX 200-II and wearing it
For an optimized and individual wearing comfort, the VMX 200-II can be
worn on your left or right ear in two different ways, i.e. with or without the
ear hook.
Wearing the VMX 200-II with ear adapter
The ear adapter with loop is supplied in 3 different sizes: S, M, L. Size M is
pre-installed. Select the size that fits your ear.
1 If the pre-installed ear adapter with loop is not the right size, remove it
from the headset.
2 Attach the selected ear adapter with loop to the headset.
3 Move the headset to your ear and insert the loop of the ear adapter.
4 Adjust the angle of the loop so that the headset fits comfortably and
securely in your ear.
1
2
S
L
M
3
4
VMX 200-II | 13
Using the VMX 200-II
Wearing the VMX 200-II using the ear hook
If you prefer using the ear hook, always wear it in combination with the ear
adapter without loop to ensure optimum wearing comfort.
1 Remove the pre-installed ear adapter with loop.
2 Attach the ear adapter without loop to the headset.
3 Attach the ear hook to the VMX 200-II. If you want to change the
wearing ear of the headset, attach the ear hook the other way round.
4 Move the headset to your ear and guide the ear hook behind your ear.
5 Position the headset so that it fits comfortably.
1
3
5
14 | VMX 200-II
2
4
Using the VMX 200-II
Switching the VMX 200-II on/off
Switching the headset on
왘 Press and hold the multi-function button until the LED flashes blue
3 times. The voice prompt “power on” is announced in the headset.
When the headset is paired but not yet connected to the mobile phone,
the LED flashes 3 times blue every 5 seconds. Once the headset and the
mobile phone are connected, the LED goes off and the voice prompt
“connected” is announced in the headset.
ON
”power on“
3s
Switching the headset off
왘 Press the multi-function button for 3 seconds.
The voice prompt “power off” is announced in the headset and the LED
flashes red 3 times. The headset switches off.
If the headset is switched off during an active call, the call will be transfered to the mobile phone.
OFF
”Power off“
3s
If the headset has not been used for more than 1 hour, it automatically
switches off to conserve battery power.
Connection profiles and volume settings are saved automatically
when the headset is switched off.
VMX 200-II | 15
Using the VMX 200-II
Retrieving information on the remaining talk time
2s
You can retrieve information on the remaining talk time at any time except
when you are on a call or listening to music:
왘 Press the Volume + button for 2 seconds.
Information announced
Meaning
“Between 5 and 10 hours
talk time”
Remaining talk time
“Between 2 and 5 hours talk time”
“Less than 2 hours talk time”
1st time: Remaining talk time is
less than 15 minutes.
2nd time: Remaining talk time is
“Recharge headset”
less than 5 minutes.
Charge the headset‘s battery
(see page 10)
Battery level indicator displayed on Apple iPhone
When the headset is paired with an iPhone, the iPhone screen shows an
additional battery level indicator for the headset.
Changing the speaker volume
Vol +
WARNING
Hearing damage due to high volumes!
Listening at high volume levels for long periods can lead to permanent hearing defects.
왘 Set the volume to a low level before putting on the headset.
왘 Do not continuously expose yourself to high volumes.
Vol –
왘 Press the
– volume up button to increase the volume.
– volume down button to reduce the volume.
When the minimum or maximum volume is reached, you hear a beep in
the headset.
Vol +
Vol 16 | VMX 200-II
Using the VMX 200-II
Making calls using the headset
Making a call
왘 Dial the desired number on your mobile phone.
You hear a beep in the headset.
왘 If your mobile phone does not automatically transfer the call to the
headset, simply press the multi-function button once to transfer the
call from the mobile phone to the headset. Alternatively, press a button
on your mobile phone (see the instruction manual of your mobile
phone).
Accepting/rejecting/ending a call
When your VMX 200-II is connected to a mobile phone and you receive
a call, you hear a ring tone in the headset and the LED flashes blue. If the
headset battery is low, the LED flashes red instead of blue.
If you listen to music, the music is paused until you end the call.
When you receive a call and your headset is switched off, simply switch
your headset on to accept the call.
왘 Press the multi-function button:
Duration Function
Voice prompt/beeps
Accepts a call
2s
Rejects a call
Ends a call
”Rejecting call”
”Call ended”
Transfering the call to/from the headset
Once a connection is established, you can transfer the call to/from the
headset.
왘 Press the multi-function button:
Duration Function
2s
Beep(s)
Transfers a call from the headset to
the mobile phone
Transfers a call from the mobile
phone to the headset
VMX 200-II | 17
Using the VMX 200-II
Redialing
The redialing function must be supported by your mobile phone or
Bluetooth device (with HF profile respectively) and be activated.
왘 Press the multi-function button:
Duration Function
2x
Voice prompt
Redials the last number
”Redialing”
Stops redialing
”Call ended”
Voice dialing
The voice dialing function must be supported by your mobile phone (with
HF profile) and be activated. Follow the instructions in the instruction
manual of your mobile phone.
왘 Press the multi-function button for about 2 seconds until you hear
2 beeps. Release the multi-function button to start the voice dialing.
Duration Function
Voice prompt
Starts/stops voice dialing
2s
”Voice dial“
왘 Say the name of the person you want to call.
The mobile phone automatically dials the corresponding number.
Muting the headset’s microphone
왘 Press the Volume up or down button:
Duration Function
Voice prompt
2s
Mutes the headset’s microphone
”Mute on“
2s
Unmutes the headset’s microphone
”Mute off“
While the microphone is muted, you hear a beep every 4 seconds.
18 | VMX 200-II
Using the VMX 200-II
Managing multiple calls
You can use the VMX 200-II simultaneously with two connected Bluetooth
devices (Multi Connection).
In order for this to function, at least two Bluetooth devices must already
be paired with the headset. To do so, follow the instructions in the chapter
“Connecting the headset to a Bluetooth device” (see page 11).
왘 Switch the headset on. The headset automatically tries to establish
a Bluetooth connection to the two last connected Bluetooth devices.
Managing two calls
You can manage two calls:
•
from either two different Bluetooth devices or
•
from one Bluetooth device.
If you want to manage two calls from one Bluetooth device, disconnect
the second Bluetooth device.
If you receive a call during an active call:
왘 Press the multi-function button:
Duration Active call
2nd
incoming call Function
Accepts the incoming call and
ends the active call
Voice prompt: ”Call ended”
2x
Accepts the incoming call and
puts an active call on hold
(toggling – phone dependent)
2s
Rejects the incoming call and
continues the active call
If you put an active call on hold (toggling):
왘 Press the multi-function button again:
Duration Active call
2nd call
put on hold Function
Ends the active call and makes the
call on hold active
(phone dependent)
2s
Establishes a conference call
(for 2 calls on one mobile phone
only)
VMX 200-II | 19
Using the VMX 200-II
Listening to music using the headset
If your headset has a Bluetooth connection to an audio source (e.g. mobile
phone, tablet or computer) and supports the A2DP/AVRCP standard, you
can use the headset to listen to music and remote-control your audio
source.
Once music is selected and started from the audio source, further changes
can be activated directly from the headset as follows:
왘 Press the multi-function button or the Volume up or down button:
Duration Function
Resumes the track (if paused)
Pauses the track
Duration Function
2s
Skips to the next track
2s
Skips to the previous track
Duration Music
20 | VMX 200-II
Function
2s
Pauses the track and activates
voice dialing
2x
Pauses the track and starts
redialing
Cleaning and maintaining the VMX 200-II
Cleaning and maintaining the VMX 200-II
CAUTION
Liquids can damage the electronics of the product!
Liquids entering the housing of the device can cause a short circuit and
damage the electronics.
왘 Keep all liquids far away from the product.
왘 Do not use any cleansing agents or solvents.
Cleaning the headset
왘 Only use a dry cloth to clean the product.
Storing the headset
If you do not use the headset for extended periods of time:
왘 Charge the built-in rechargeable battery every 6 months for about 1 hour.
왘 Store the headset in a clean and dry environment.
VMX 200-II | 21
If a problem occurs ...
If a problem occurs ...
Problem
Possible cause
Possible solution
Headset cannot
be switched on
The rechargeable
battery is flat.
Recharge the rechargeable battery.
10
No audio signal
The headset is not
paired with the
mobile phone.
Check if the headset is
paired. If necessary, pair
the headset with the
mobile phone again.
12
The volume is
adjusted too low.
Increase the volume.
16
The headset is
switched off.
Switch the headset on.
15
The pairing does
not work.
Check if the your
Bluetooth device
supports the HF or
HS profile.
–
The mobile phone
is switched off.
Switch the mobile
phone on.
15
Headset cannot
be paired
Headset does
not react to any
button press
The operation of the Reset the headset to
headset is faulty.
the factory default
settings.
Page
22
If a problem occurs that is not listed in the above table or if the problem
cannot be solved with the proposed solutions, please contact your local
Sennheiser partner for assistance.
To find a Sennheiser partner in your country, search at
www.sennheiser.com.
Restoring factory default settings (Reset)
You can restore the following settings to their factory default settings:
•
list of paired Bluetooth devices (afterwards empty)
1 Set the headset to pairing mode (see page 12). The LED flashes alternately blue and red, indicating that the headset is in pairing mode.
2 Simultaneously press and hold the volume up button and the volume
down button for 3 seconds.
1
2
3s
5s
Vol +
Vol -
22 | VMX 200-II
If a problem occurs ...
If you are out of the Bluetooth transmission range
Calling is only possible in the Bluetooth transmission range of the mobile
phone. The transmission range largely depends on environmental conditions such as wall thickness, wall composition etc. With a free line of sight,
the transmission range of most mobile phones and Bluetooth devices is up
to 10 meters.
If the headset gets out of the the Bluetooth transmission range of the
mobile phone, the sound quality deteriorates and the voice prompt “lost
connection” is announced in the headset. This announcement is repeated
at regular intervals for 5 minutes.
If you re-enter the Bluetooth transmission range within these 5 minutes,
the connection is re-established and the voice prompt “connected” is
announced in the headset.
If you spend more than 5 minutes outside the Bluetooth transmission
range, the connection breaks down completely and you have to manually
re-establish the connection.
To re-establish a connection to the mobile phone:
왘 Briefly press the multi-function button.
Once the connection is successfully re-established, the voice prompt
“connected” is announced in the headset.
”connected“
10 m
VMX 200-II | 23
Specifications
Specifications
VMX 200-II
Dimensions (W x H x D)
approx. 55 x 26 x 58 mm
Weight without ear hook
approx. 10 g
Standby time
up to 12 days
Talk time
up to 10 hours
Charging time
1 h 20 min
Rechargeable battery (built-in)
Lithium Polymer; 3.7 V; 120 mA
Speaker type
dynamic, neodymium magnet
Microphone type
dual omni-directional electret
microphone
Audio
digital noise and echo suppression
Operating temperature range
+10°C (+50°F) to
+40°C (+104°F)
Operating relative humidity
20 to 85%, non-condensing
Storage temperature range
20°C (4°F) to +60°C (140°F)
Storage relative humidity
10 to 95%, non-condensing
Car charger – model number*
CAWQ02-5.0-150C/SIL-C05050A
Bluetooth
Bluetooth
version 3.0
Range
up to 10 m/class 2
Transmission frequency
2402 MHz to 2480 MHz
Profiles
HSP (v1.2), HFP (v1.6),
A2DP (v1.2), AVRCP (v1.0)
Output power
3.07 dbm/2.028 mW
VMX 200-II power supply unit*
Model number
US version: SSA-3P 050015US
EU version: SSA-3P 050015EU
Nominal input voltage
100 – 240 V~
Nominal input current
max. 0.2 A
Mains frequency
50 – 60 Hz
Nominal output voltage
5V
Nominal output current
max. 150 mA
Operating temperature range
+10°C (+50°F) to
+40°C (+104°F)
Operating relative humidity
20 to 85%, non-condensing
Storage temperature range
20°C (4°F) to +60°C (140°F)
Storage relative humidity
10 to 95%, non-condensing
Weight
approx. 75 g
* Not supplied in VMX 200-II USB version.
24 | VMX 200-II
Manufacturer Declarations
Manufacturer Declarations
Warranty
Sennheiser electronic GmbH & Co. KG gives a warranty of 24 months on this
product. For the current warranty conditions, please visit our website at
www.sennheiser.com or contact your Sennheiser partner.
FOR AUSTRALIA ONLY
Sennheiser’s goods come with guarantees that cannot be excluded under
the Australian Consumer Law. You are entitled to a replacement or refund
for a major failure and compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired or
replaced if the goods fail to be of acceptable quality and the failure does
not amount to a major failure.
This warranty is in addition to other rights or remedies under law. Nothing
in this warranty excludes, limits or modifies any liability of Sennheiser
which is imposed by law, or limits or modifies any remedy available
to the consumer which is granted by law. To make a claim under this
warranty, contact Syntec International Pty Ltd, Unit 3, 31 Gibbes Street
Chatswood NSW 2067, AUSTRALIA Phone: (02) 9910 6700, email:
[email protected]. All expenses of claiming the warranty will be
borne by the person making the claim.
The Sennheiser International Warranty is provided by Syntec International
Pty Ltd (ABN 94003433798), unit 3, 31 Gibbes Street Chatswood NSW
2067 Australia.
In compliance with the following requirements
•
RoHS Directive (2002/95/EC)
•
WEEE Directive (2002/96/EC)
Please dispose of this product by taking it to your local collection
point or recycling center for such equipment. This will help to
protect the environment in which we all live.
•
Battery Directive (2006/66/EC)
The product built-in rechargeable batteries can be recycled. In
order to protect the environment, please dispose of defective
products with built-in rechargeable batteries as special waste or
return them to your specialist dealer.
CE Conformity
•
R&TTE Directive (1999/5/EC)
•
EMC Directive (2004/108/EC)
•
Low Voltage Directive (2006/95/EC)
•
ErP Directive (2009/125/EC)
The CE Declaration of Conformity is available on our website at
www.sennheiser.com. Before putting the device into operation, please
observe the respective country specific regulations!
VMX 200-II | 25
Manufacturer Declarations
In compliance with:
USA
FCC ID: DMOCBMSDE
Canada
IC: 2099A-VMX200II
Europe
Australia/
New Zealand
Singapore
Russia
ME10
Japan
R
201-125641
Korea
䂹Ḿ♹ⱥⱩ⦉ᷙㇹ㇮㑖㍉㹑䆁⸥ᝅᷪⱶ㊹㋍㊑
䂹Ḿ♹ⱥⱩ⦉ᷙ㍉㹑䆁⸥ᝅᷪⱶ㊹㋍㊁✅⎡㊽◊ろ㍉ᡁᡅ⍭
ὡⱡ⦉ⷩᷙ䂥ⵝㄋ㊑
Certification no.
KCC-CRM-SE9-VMX200-II
Product name
Model
Applicant
Manufacturer
Country of Origin
Bluetooth
26 | VMX 200-II
Bluetooth headset
VMX 200-II
Sennheiser electronic GmbH & Co. KG
Sennheiser electronic GmbH & Co. KG
China
Manufacturer Declarations
Statements regarding FCC and Industry Canada
This device complies with Part 15 of the FCC Rules and with Industry
Canada standard(s) for license-exempt radio devices. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules and RSS 210
of Industry Canada. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications made to this equipment not expressly approved
by Sennheiser electronic Corp. may void the FCC authorization to operate
this equipment.
RF Radiation Exposure Information
Since the radiated output of this device is far below the FCC/IC RF radio frequency exposure limits, it is not subjected to routine RF exposure evaluation as per Section 2.1093 of the FCC rules and RSS GEN rules sections 2.5.1
& 2.5.2.
Trademarks
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by Sennheiser electronic
GmbH & Co. KG is under license.
iPod® and iPhone® are registered trademarks of Apple Inc, registered in the
U.S. and other countries.
VMX 200-II | 27
Sennheiser electronic GmbH & Co. KG
Am Labor 1, 30900 Wedemark, Germany
www.sennheiser.com
Publ. 10/12, A02