ULQ2001
ULQ2003 - ULQ2004
Seven Darlington array
Features
■
■
■
■
■
■
■
■
■
Seven Darlington per package
Extended temperature range: -40 to 105 °C
Output current 500 mA per driver (600 mA peak)
Output voltage 50 V
Automotive Grade product in SO16 package
Integrated suppression diodes for inductive loads
Outputs can be paralleled for higher current
TTL/CMOS/PMOS/DTL compatible inputs
Inputs pinned opposite outputs to simplify layout
DIP-16
SO16
(Narrow)
Description
The ULQ2001, ULQ2003 and ULQ2004 are high voltage, high current Darlington arrays each containing seven open collector Darlington pairs with common emitters. Each channel rated at 500 mA and can withstand peak currents of 600 mA.
Suppression diodes are included for inductive load driving and the inputs are pinned opposite the outputs to simplify board layout. The versions interface to all common logic families. These versatile devices are useful for driving a wide range of loads including solenoids, relays DC
Table 1.
Device summary
Part numbers Order codes
ULQ2001 ULQ2001A
ULQ2003
ULQ2004
ULQ2003
ULQ2003
ULQ2003A
ULQ2004A
ULQ2003D1013TR
ULQ2003D1013TRY
(1)
ULQ2004
1.
Automotive Grade products.
ULQ2004D1013TR motors, LED displays filament lamps, thermal print-heads and high power buffers. The
ULQ2001A/2003A and 2004A are supplied in 16 pin plastic DIP packages with a copper leadframe to reduce thermal resistance. They are available also in small outline package (SO16) as
ULQ2003D1/2004D1. The ULQ2003 is available as Automotive Grade in SO16 package. The commercial part numbers is shown in the order codes. This device is qualified according to the specification AEC-Q100 of the Automotive market, in the temperature range -40 °C to 125 °C and the statistical tests PAT, SYL, SBL are performed.
Description
General purpose, DTL, TTL,
PMOS, CMOS
5 V TTL, CMOS
6–15 V CMOS, PMOS
Packages
DIP-16
DIP-16
DIP-16
SO16 in tape and reel
SO16 in tape and reel
SO16 in tape and reel
February 2011 Doc ID 1537 Rev 6 1/14
www.st.com
14
5
6
7
3
4
1
2
Contents
Contents
ULQ2001, ULQ2003, ULQ2004
Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Pin configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2/14 Doc ID 1537 Rev 6
ULQ2001, ULQ2003, ULQ2004
1 Diagram
Figure 1.
Schematic diagram
ULQ2001 (each driver) ULQ2003 (each driver)
ULQ2004 (each driver)
Diagram
Doc ID 1537 Rev 6 3/14
Pin configuration
Figure 2.
Pin connections (top view)
ULQ2001, ULQ2003, ULQ2004
4/14 Doc ID 1537 Rev 6
ULQ2001, ULQ2003, ULQ2004 Maximum ratings
Table 2.
Symbol
Absolute maximum ratings
Parameter
V
O
V
IN
I
C
I
B
T
A
T
STG
T
J
Output voltage
Input voltage (for ULQ2003A/D1 - 2004A/D1)
Continuous collector current
Continuous base current
Operating ambient temperature range
Storage temperature range
Junction temperature
Table 3.
Symbol
R thJA
Thermal data
Parameter
Thermal resistance junction-ambient, max.
DIP-16
70
Value
50
30
500
25
-40 to 105
-55 to 150
150
SO16
120
Unit
°C/W
Unit
V
V mA mA
°C
°C
°C
Doc ID 1537 Rev 6 5/14
Electrical characteristics ULQ2001, ULQ2003, ULQ2004
T
J
= -40 to 105 °C for DIP16 unless otherwise specified,
T
J
= -25 to 105 °C for SO16 unless otherwise specified.
Table 4.
Symbol
I
CEX
V
CE(SAT)
Collector-emitter saturation
voltage (
Figure 5
)
I
I(ON)
I
I(OFF)
V
I(ON) h
FE
C
I t
PLH t
PHL
I
R
Electrical characteristics
Parameter
Output leakage current
Input current (
Figure 6
)
Input current (
Figure 7
)
Input voltage (
Figure 8
)
DC forward current gain
(
Figure 5
)
Input capacitance
Turn-on delay time
Turn-off delay time
Clamp diode leakage current
(
Figure 9
)
Test conditions
V
CE
= 50V, (
Figure 3
)
T
J
= 105°C, V
CE
= 50V (
Figure 3
)
T
J
= 105°C for ULQ2004, V
CE
= 50V,
V
I
= 1V (
Figure 4
)
I
C
= 100mA, I
B
= 250µA
I
C
= 200mA, I
B
= 350µA
I
C
= 350mA, I
B
= 500µA for ULQ2003, V
I
= 3.85V
for ULQ2004, V
I
= 5V for ULQ2004, V
I
= 12V
T
J
= 105°C, I
C
= 500µA for ULQ2003
V
CE
= 2V, I
C
= 200mA
V
CE
= 2V, I
C
= 250mA
V
CE
= 2V, I
C
= 300mA for ULQ2004
V
CE
= 2V, I
C
= 125mA
V
CE
= 2V, I
C
= 200mA
V
CE
= 2V, I
C
= 275mA
V
CE
= 2V, I
C
= 350mA for ULQ2001, V
CE
= 2V,
I
C
= 350mA
0.5 V
I to 0.5V
O
0.5 V
I to 0.5V
O
V
R
= 50V
T
J
= 105°C
,
V
R
= 50V
V
F
Clamp diode forward voltage
(
Figure 10
)
1.
Guaranteed by design.
I
F
= 350mA
50
1000
Min.
Typ.
Max.
Unit
50
100
µA
500
0.9
1.1
1.3
1.1
1.3
1.6
0.93
1.35
0.35
0.5
1
65
1.45
15 25
(1)
0.25
1
(1)
0.25
1
(1)
50
100
1.7
5
6
7
8
2.4
2.7
3
2
V mA
µA
V pF
µs
µs
µA
V
6/14 Doc ID 1537 Rev 6
ULQ2001, ULQ2003, ULQ2004 Electrical characteristics
T
J
= -40 to 125 °C for SO16 unless otherwise specified.
Table 5.
Symbol
I
CEX
I
I(ON)
I
I(OFF)
V
I(ON)
C
I t
PLH t
PHL
I
R
V
F
Electrical characteristics for ULQ2003D1013TRY (Automotive Grade)
Parameter Test conditions Min.
Typ.
Max.
Unit
Output leakage current
(
Figure 3
)
V
CE
= 50V 50 µA
V
CE(SAT)
Collector-emitter saturation
voltage (
Figure 5
)
Input current (
Figure 6
)
Input current (
Figure 7
)
Input voltage (
Figure 8
)
Input capacitance
Turn-on delay time
Turn-off delay time
Clamp diode leakage current
(
Figure 9
)
Clamp diode forward voltage
(
Figure 10
)
I
C
= 100mA, I
B
= 250µA
I
C
= 200mA, I
B
= 350µA
I
C
= 350mA, I
B
= 500µA
V
I
= 3.85V
I
C
= 500µA
V
CE
= 2V, I
C
= 200mA
V
CE
V
CE
= 2V, I
C
= 2V,I
C
= 250mA
= 300mA
0.5 V
I to 0.5V
O
0.5 V
I to 0.5V
O
V
R
= 50V
I
F
= 350mA
50
0.9
1.1
1.3
1.1
1.3
1.6
0.93
1.35
65
15
0.25
0.25
2.4
2.7
3
25
1
1
1.7
50
2
V mA
µA
V pF
µs
µs
µA
V
Doc ID 1537 Rev 6 7/14
Test circuits
Figure 3.
Output leakage current
ULQ2001, ULQ2003, ULQ2004
Figure 4.
Output leakage current (for
ULN2002 only)
Figure 5.
Collector-emitter saturation voltage Figure 6.
Input current (ON)
Figure 7.
Input current (OFF) Figure 8.
Input voltage
8/14 Doc ID 1537 Rev 6
ULQ2001, ULQ2003, ULQ2004
Figure 9.
Clamp diode leakage current
Test circuits
Figure 10.
Clamp diode forward voltage
Doc ID 1537 Rev 6 9/14
Package mechanical data
6 Package mechanical data
ULQ2001, ULQ2003, ULQ2004
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK
®
packages, depending on their level of environmental compliance. ECOPACK
® specifications, grade definitions and product status are available at:
www.st.com
.
ECOPACK
®
is an ST trademark.
10/14 Doc ID 1537 Rev 6
Dim.
I
L e3
F
D
E e
Z a1
B b b1
ULQ2001, ULQ2003, ULQ2004 Package mechanical data
Min.
0.51
0.77
Plastic DIP-16 (0.25) mechanical data
mm.
Typ.
Max.
1.65
Min.
0.020
0.030
inch.
Typ.
0.5
0.25
0.020
0.010
20
8.5
2.54
17.78
0.335
0.100
0.700
7.1
5.1
3.3
0.130
1.27
Max.
0.065
0.787
0.280
0.201
0.050
Doc ID 1537 Rev 6
P001C
11/14
Package mechanical data
DIM.
A a1 a2 b
mm inch
MIN.
TYP.
MAX.
MIN.
TYP.
MAX.
0.1
1.75
0.25
0.004
0.069
0.009
0.35
1.6
0.46
0.014
0.063
0.018
b1
C c1
D
(1)
E e
0.19
9.8
5.8
0.5
0.25
45
10
°
6.2
0.007
(typ.)
0.386
0.228
0.020
0.010
0.394
0.244
e3
F
(1) 3.8
1.27
8.89
4.0
0.150
0.050
0.350
0.157
G
L
4.60
0.4
5.30
1.27
0.181
0.150
0.208
0.050
M
S
0.62
8
° (max.)
0.024
(1) "D" and "F" do not include mold flash or protrusions - Mold flash or protrusions shall not exceed 0.15mm (.006inc.)
ULQ2001, ULQ2003, ULQ2004
OUTLINE AND
MECHANICAL DATA
SO16 (Narrow)
12/14 Doc ID 1537 Rev 6
0016020 D
ULQ2001, ULQ2003, ULQ2004
7 Revision history
Revision history
Table 6.
Date
Document revision history
05-Dec-2006
23-May-2007
17-Apr-2008
25-Aug-2008
11-Feb-2011
Revision
2
3
4
5
6
Changes
Order codes updated.
Order codes updated.
Added new order codes for Automotive grade products see
Table 1 on page 1
.
Modified:
Table 4 on page 6
and
Table 5 on page 7
.
Modified: T
J
= -25 to 105 °C
Table 4 on page 6
.
Doc ID 1537 Rev 6 13/14
ULQ2001, ULQ2003, ULQ2004
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2011 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
14/14 Doc ID 1537 Rev 6
